Ubuntu :: Install Live CD On A NTFS Flash Disk?
Jan 18, 2011I have ubuntu running on a SD but I can't install it when NTFS formatted wich works faster. What can I do?
View 6 RepliesI have ubuntu running on a SD but I can't install it when NTFS formatted wich works faster. What can I do?
View 6 RepliesI would like to install linux (ubuntu) on a Flash disk with NTFS partition and boot from flash disk, is it possible? Yf yes how could i install ?
View 3 Replies View RelatedI wanted to keep kon-boot and ubuntu live on USB drives instead of CDs for the ease of carrying around. I wonder if its at all possible to put both tools on same USB drive instead of keeping them on two separate ones?
View 3 Replies View RelatedDell 64 bit laptop with no hard drive, I'm running 10.04.2 from a 4 gb flash drive in persistence mode (Linux Live USB), and I'm trying to get ..... to work. I've tried everything on Adobe's site, and several methods from the forums. what's the trick to installing flash in either Firefox or 64 bit Chrome on a 64 bit system? The last method I tried was here, and the terminal said 404 not found after the download command.
I can usually find this stuff myself, but my eyes are getting watery, and my throat tight, and (sniff) I think
Is there another way to install Ubuntu without using a live disk? well what would be the website that you can use?
View 7 Replies View RelatedI have made several live Cd's and img for my flash drive and tried to even preview Ubuntu before install, but nothing seems to be working. it makes it to the screen that says Ubuntu with the dots and the dots "cycle" then afew seconds later, weather cd or flash drive, everything just stops and my computer freezes. Tried nomodeset and everything i could find between here and google to no avail.
cant get past that load screen. Ive been lurking on the forum for days and finally got fed up enough to post this because im fresh and have no clue what im doing when it comes to this. all i know is i want something better than windows(lol) and Ubuntu seems like its right up my alley...user, my "skills" if you will, are better than most, but Linux.its like trying to reed Greek for me.Also, computer specs...Toshiba A505-S6025 4gb Memory Nvidia GeForce 310M (from what i read i will have trouble with this) Realtek RTL8191SE wlan (also will have problems with this)
EDIT: just ran live cd with virtual box and it started the demo of Ubuntu with no problem with no options(like nomodeset) checked off... apparently i think im doing something wrong when it comes to booting the other way...
I'm running a Lucid Wubi system and I just got everything exactly the way I like it. My brother was having a hard time with Windows and I recommended Linux. Well being the inpatient person he is, he wasn't impressed with it "right out the box". But he's seen my setup and still wants to give it a shot. So I was curious if there was a way to create a Live CD from the way I have it already instead of downloading the "start-up" version from the site? I think they call them distros but I'm not for sure. This would be great I think to help introduce my brother and others to this awesome OS, and plus when I mess with the wrong things(which I have, and will again) I could re-install it from where I was instead of having to redo everything.
View 5 Replies View RelatedI have been trying everything to install flash player on Ubuntu 11.04, I've done everything and it wont work. Tried Downloading it from adobe, that ..... redirects me to, tried the source in the software centre, tried installing it through the terminal.
It either won't add the source or asks me for my install disk, when that is in the drive it keeps asking like it isn't (but it is mounted ect)Any one know a terminal command or way to fix this.
I am trying to install Debian Live to a 4 GB flash drive. I am using UNetBootin to extract this (debian-live-6.0.1-i386-gnome-desktop.iso) file to a FAT32 partition on my flash drive. It installs fine, and shows me the SysLinux menu fine, but when i choose live(or anything else) it says"Invalid or Corrupt Kernel Image". I also tryed these other installers. pendrivelinux's Universal USB Installer. It gives me the same message. win32diskimager gives me a different Debian menu, but the same problem. Does anyone know what is wrong, and how to fix it. It is driving me nuts!
View 11 Replies View RelatedI have a DELL D420 without optical drive and i want to install opensuse 11.3 on it, also i don't have an external Optical drive. I want to know if it's possible to install OpenSuse 11.3 from a Flash drive or Amovible disk, and how to proceed to do that.
PS: is it a good idea to install Opensuse on dell d420: C2D ulv 1.2, 1gb ram, 60 HD ? it it'll work well.
I have an old HP PC with 2 drives: Primary (C = 20GB) and a slave (E = 60GB). I have Windows XP Pro OS (which I want to completely replace with Ubuntu). Ubuntu 10.10 is installed on E as a side-by-side (with XP on C). I am done testing Ubuntu and now want to completely replace the XP OS.Ubuntu is installed on E-drive as a partition. ISSUE: When I log on the PC goes directly to the GRUB menu but I get no option to boot from the Live Disk 10.10 during the boot-up.
HISTORY: I have tried (unsuccessfully) to remove Ubuntu from my E-drive by use of the uninstall function from Windows control panel. I have also tried to remove it using the manage/Disk Management process but the "Format" and "Delete" options are unavailable (grayed out) so cannot use that. I would like to do a complete clean up and fresh install of Ubuntu as my only OS.I have read and tried a number of internet articles / recommendations about opening BIOS and redirecting the start-up to the disk, but I do not get any option or any time during the boot to do that.
QUESTIONS:
1) How can I get my HP PC to boot from (recognize) the Ubuntu Live Disk (CD)?
2) Would a complete removal and clean reinstallation be a better approach?
3) And how can I remove Ubuntu from the partition on E (as I want to dedicate the C-drive exclusively for Ubuntu)?
This is my first post so please be patient. I am unfamiliar with this part of the installation process.
I downloaded Fedora-13-i686-Live-KDE.iso. Is there any way to install it from hard disk?
View 2 Replies View RelatedIs it possible to install the fedora 14 live to the hard disk and how?
View 7 Replies View RelatedI'd like to have both on my system to try out but I don't want to delete my OS to download and install the install DVD. Did I pooch the screw here?
View 2 Replies View RelatedI've a dvd of "backtrack 4 r2 nemesis" which I'm about to install into my flash disk, so that I can access my installed backtrack system from not only my computer, but also from another computer by using the flash disk. "I don't know how to install "backtrack 4 r2 nemesis" into my flash disk".
View 2 Replies View RelatedI successfully booted OpenSuse 11.2 from DVD. But I could not configure my wireless internet connection. YAST said it couldn't configure it because something else was controlling that (Network Manager? something like that)How can I configure this. Related issue. When booting from DVD is there a way to save configuration settings so I don't have to start from scratch the next time I boot from DVD?
View 7 Replies View RelatedThe system is 11.1 32 bit and used to work ok
All the drives function and mount normally under Parted Magic.
Sometimes a cd will mount after 15 mins or so but if it is ejected it will not remount. after that event the dmesg output is 3 times as long. As it is 35K chrs long it is too long to post!
I have changed hardware and cables with no effect.
I have run the repair option on the install disk. I get a cannot find floppy error
It also reports cups, hal, ntp & postfix as errors but if I select repair it still returns the same next time I run the repair routine.
It also says the bootloader is faulty if I select repair I go into an infinite loop so I exit with skip. Anyway the system boots ok and runs just fine apart from the cd/fdd/usb problem
I've run the install to hard drive program three times over and each time I get "disk boot failure". I believe I've got Grub to install to the mbr but I am not sure.
System:
Barton 3200+ with 1GB of DDR1
Asus A7V333
High Point hard disk controller
other items
All the hard drives are hooked to the High Point controller. It recognizes all of them that have power hooked up and read/writes to them. Two have 98SE installs, the third is where I'm trying to install Fedora 12 to get away from some problems I'm having with 98SE.
The BIOS is set up to boot from the "SCSI device" which means it's booting from the High Point controller. The High Point lets me set a boot mark, which, when set to the Fedora drive, yields the disk boot failure no matter what I do to it.
I'm a Linux newbie and are trying to install F13 from bootable USB onto the HD of a DELL mini netbook. I've followed the install wizard's defaults including the "Use All Space option." The install errors out at about 20% of progress during the "Copying live image to hard drive" process. The error dialog is as followed:"There was an error installing the live image to your hard drive. This could be due to bad media. Please verify your installation media..." and it comes with options to Exit installer or Retry. I have since retried and restarted several times and still came to the same error. FYI, I've initially attempted to install F13 to the HD over an existing Windows XP.
View 2 Replies View RelatedIs there a way to re-install grub on the master boot record of a hard disk using a live cd?If so will i have to configure it?I'm trying to install a linux distro on my ao751h(with poulsbo ) but i after installing it i can't boot.I get an error 15 or a flashing underscore.I have already tried ubuntu,debian,mint and slackware(LILO isn't compatible with poulsbo).Also,does anybody experience problems with the ubuntu 10.04 and 10.10 installers or is it only me?when i choose the language and keyboard settings the installation stop as it is and i get a crash report.
View 4 Replies View RelatedI wanted to install a Linux distro to a flash drive so that I can have a portable OS with all my settings, programs, etc. wherever I go. So I fired up a Linux Mint Live CD and installed Mint to the flash drive, and this seems to work OK. But now, whenever I try to boot up my system normally without the flash drive plugged in, it doesn't seem to work. It basically hangs for a bit, and then I get the following prompt:
However, when I try powering my system up when the USB is plugged into the computer, it gives me an option between using the OS installed on my USB and the OS installed on my HD. Selecting the latter, everything loads up just fine. I'm guessing that installing Mint to the flash drive somehow messed with my native Grub installation.
I need little help on live disk creation and disk image backup.
Can I create live disk using my hard drive installation? If yes then, can I restore the fedora from the live disk to the hard drive. I mean to say that from that live disk can I install fedora again in my hard drive.
Second question is, if I create the disk image of my hard drive( including ntfs & FAT32 partition) , can I restore it in a blank drive. If so , then can os will be restored also?
Reproducible with Firefox 3.6.6 (installed from Ubuntu 10.04 repository), on Dell D620, Ubuntu 10.04 Steps to reproduce:
1) start Firefox from command line "firefox -P"
2) create new Firefox profile on NTFS volume (mounted with NTFS-3g)
3) add NoScript extension (through extension manager Get Add-ons), restart Firefox as suggested
4) extension is not added to Firefox In case at step 2) profile is created on Linux volume, at 4) extension is added to firefox.I'm not 100% sure, but I think this bug is related to Firefox 3.6 update (no problems with Firefox 3.5). I did not make proper investigation, but I have feeling same problem applies to Thunderbird 3.1.This issue does not allow to share Firefox/Thunderbird profile on dual boot machine (Ubuntu/WindowsXP).
I have a windows install that is totally hosed, bluescreens, etc. I want to try to force mount it from Ubuntu to get whatever data I can, but it won't allow me to mount. It keeps telling me to run chkdsk /f and reboot twice. But that's not possible. I was wondering if there are any ntfs tools for Ubuntu or any data recovery tools I can use to get what I can from this drive.
View 3 Replies View RelatedI'm new to debian ,I was trying to mount my NTFS partition but I did that only with read permissions I couldn't install ntfs-config(allthough I have ntfs-3g installed).So I want to figure out how to mount my partitions with read/write permissions automatically as the systeme starts ?
View 2 Replies View RelatedGreetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.
View 9 Replies View RelatedI've occasionally changed HDD filesystem type in Disk Utility from NTFS to Linux Extended . It created an extended partition containing some other partitions instead of NTFS.
View 3 Replies View RelatedI have just bought a WD USB disk and (of course) it is formatted in NTFS and I want to reformat it to ext3. But Gparted can't unmount it, I get the info:
Unable to find mount point
Unable to read the contents of this file system!
Because of this some operations may be unavailable. The following list of software packages is required for ntfs file system support:
ntfsprogrs. But ntfsprogrs is already installed on my Ubuntu (Natty) system! How can I reformat that disk?
After a motherboard change in my pc, I would like to dualboot Slackware 13 with WinXP. In the old system, (dualboot Win2K-XP), I had "My Documents " on a separate disk, as it was used by both OS's. In the new system, I would again like to share this between the 2 operating systems. (both clean install) --> Is it possible to use the existing NTFS disk as the /home in Slackware?
For the Linux side, I am planning 4 partitions on 3 separate HD's:
This is my first time using Fedora. My previous experience is from Ubuntu. However I want to give a try for Fedora so I went ahead to install it on my new computer. Problem is that Fedora Installer (Live CD) wiped out my NTFS Partition. Causing my computer unable to recover Vista from factory DVD because it lost system partition as well. I want to know if this is my error or a bug in installer.
Original partition setup:
220 GB - Vista System Partition (NTFS)
14 GB - Recovery Partition (NTFS)
First I resized system partition under Windows Management in Vista:
170 GB - System
50 GB - Unallocated
14 GB - Recovery
Using GParted from Ubuntu 9.04 Live CD, moved recovery to the left:
170 GB - System
14 GB - Recovery
50 GB - Unallocated
Rebooted into Vista, make sure everything is fine. Then put in FC 11 Live CD, using custom layout setup in partition, intended partition layout is:
170 GB - System (NTFS) - Primary sda1
14 GB - Recovery (NTFS) - Primary sda2
200 MB - /boot (ext3) - Primary sda3
sda4 - Extended Partition
45.8 GB - / (ext4) - sda5
4 GB - swap - sda6
After I check my setup and pressed enter, it returned with unable to format /boot error: -1. Restart FC installer, it tells me that my hard drive needs to be re-initialized. I clicked no and reboot. BIOS tells me that no OS is found. Attempting to recover from factory DVD failed, telling me that system partition is gone. I want to know did I do something wrong or is this a bug in FC installer.