Is there an easy way to determine the concise history of all the times I've run yum to install packages on my machine? I'm migrating to FC15 and I'd like to duplicate the old machine as much as possible on the new machine, and therefore, I'd like to know what I installed on it.
View 3 RepliesI want to install Debian but I'd like to keep my Skype chat history.
I don't know if it's possible to just copy from %appdata% the skype folder and put it into the Debian's one.
How could I do? I read one post but it's quite old, so maybe there's something new now.
I am using Fedora 13. Is there a log file in system I can view to see the list of command lines I had entered in terminal so far?
Commands like
Code:
ls
cd /usr/local
emacs test.txt
which are logged in the log file.
When I try to login as me - it gets pretty far but then something happens and automatically logs out. This happens in Gnome, Kde too. Now - I have no problem logging in a Root. Is there a way I can try to stop the login process before it kicks me out, or is there a way to look at some files to tell me what's going on?
View 3 Replies View RelatedI am using squid proxy server for sharing Internet in my internal network. I would like to know that how can I check the browsing history by individual users web surfing history by their IP addresses?
View 1 Replies View RelatedMy systemd-udev-settle.service is failing for some reason.
systemctl status systemd-udev-settle.service -a output
Code: Select all● systemd-udev-settle.service - udev Wait for Complete Device Initialization
Loaded: loaded (/lib/systemd/system/systemd-udev-settle.service; static)
[ode]...
Warning: Journal has been rotated since unit was started. Log output is incomplete or unavailable.
Is there anyway to find the install history log on openSUSE 11.3 KDE4?
View 2 Replies View RelatedI can get the installation history via the command line:
Code:
rpm -qa --last | less
Is it not possible to get it from YaST in the same way as you can in Synaptic? It would not only be nice to see a basic list, but also what has been pulled in as dependencies and have it grouped by 'installation sets'. Too much to ask?
I am trying to find a method or tool to know the exact command history of all my users.I have tried to use "psacct" ,but it is not solving my perpous as it is only giving the command name.means let say 10 users have used "rm" command to remove 10 differint files then I want to know which user has removed what file.
But psacct will only give me the command name like rm used bu the user name.Then I tried to use the "w: command but it is also not solving the problem..
How can I reset the history of the command at? The system labels each command starting with 1, is there a ay to reset that back to 1.
View 2 Replies View RelatedDoes anyone know of a way to determine how the PC/Server was powered on? I'm interested in writing a startup script that performs a specific action depending on the poweron cause.
For example:
If powered on by "wakalarm" perform task X & shutdown.
If powered on by "power button" perform task Y.
Is there any way to determine the cause of the power on? I'm running Federa 12.
Having recovered from busting my installation, feel urgent need to know what I did to set it up.So...would like to see all commands I ran in terminal window and store them (execute as script in future?)I can see prior commands using up arrow, is there a way of storing all of those commands in history?Also, any pointers to setting up sort of backup of the package installation setup?
View 7 Replies View RelatedWhat command is used to delete input command history in terminal ?I am afraid my friend will trace what been inpu
View 10 Replies View RelatedIn my yum history listing, I've noticed the "EE" in the Altered column next to some of the entries. It looks like this (example from Section 5.16.1 History [URL]):
Code:
617 | System <unset> | 2010-12-23 13:16 | E, I, U | 30 EE
Does anyone know what the "EE" means?
My manager has asked me to look at memory drop on system while I was doing test on Linux machine. there is a big dip in memory graph produced by another tool. I do not know which processes were responsible for those memory dips. Is there any way I can find memory utilization of process during last week?
View 1 Replies View RelatedWell, its been 2 days since I have had Suse 11.2 on this laptop. (Fujitsu-Siemens Amilo M7400 1.6 GHz Centrino, 60GB HDD)Everything seems to work in order, but at certain times, the computer will just log out on its own, without any reason. It gives no error when it does this, so there is no way for me to determine what the cause is. As far as the rest of the OS goes, everything seems perfectly fine, except for the automatic log out the computer does. It just annoys me when the computer logs out by itself sometimes because then I am lost on where I was before, since nothing gets saved when it does this. It makes things really challenging when you are typing something as I am now and then the computer just logs itself out on its own, leaving me with nothing because it does not save anything. And if so, what are the repair steps to this issue??
View 9 Replies View RelatedI don't know why, but when i first boot openSUSE at the morning in my Aspire it hangs over and over again. I don't know why is this, but the gecko appear, the white bar appear, and moves 1cm, and then, puff no more blinking from the hard drive. Then i force te reboot, over and over until works.The message is: acerhdf: no Aspire One hardware foundWhen i first installed the mini with openSUSE it works perfect for a week, and then start this problem.I have tried with different kernel flavors (like desktop) and still nothing.
View 9 Replies View RelatedI'v downloaded the new versions of suse many times. I average 3 to 4+ times before it's successful, bad downloads(bad checksum) or download stops for no reason. I'v used direct link and bittorrent. Bittorrent takes 2-3 times as long. So, I usually use direct link. I can do the download in about 6-8 hours. The first time, it stopped at 334 megs, using direct link. Using bittorrent, it took about 16 hours. I got a bad checksum. Is there a way I fix the file without downloading it again? Suse 10.4
View 9 Replies View RelatedCan I add Times New Roman to a Hardy/OpenOffice 2.4 install?
View 5 Replies View RelatedI have bumped into a rather bizarre problem on a redhat system at work:I have mapped 10 LUNS to a server.The server has 2 HBAs, but the luns were mapped only to 1 HBA,and only one HBA is connected with a fibre cable.Every lun has only 1 path,the storage array management software (hitachi storage)confirms this.However, instead of 10 luns, I am seeing 40 luns!
- this is the output of the command ll /dev/sd*:
ll /dev/sd*
brw-r----- 1 root disk 8, 0 Mar 17 15:11 /dev/sda
[code]....
I have tried to migrate my empathy settings and chat history to another machine.I copied .config/apps/empathy .local/share/empathy .mission-control .gconfig/app/empathy...But the new empathy do not recognize these settings. What am I missing?
View 3 Replies View RelatedI have a simple question that I can't find the answer so far, I use Evolution email client witch is great, the only problem is that the client does not save previous email addresses so I have to enter them manually each time.
View 2 Replies View RelatedOn our app server the logs from the Sybase Mobilink service get logged to /var/log because of that I did a chmod a+rx /var/log and all is well until.... the next day QA logs in goes to check the logs and gets:
Quote:
qa@dwdb [~]$ ls /var/log
ls: /var/log: Permission denied
qa@dwdb [~]$
I got three times fsck failure during system booting, fixed issue by reinstall whole suse last two times, this time I really do not want reinstall.
View 4 Replies View RelatedI changed over to U-Verse which means I have a new router, gateway and IPs. Took some doing but everything is working on my server with one exception.Outgoing SMTP mail.I get CONNECTION TIMEOUT when ever something from inside my network tries to hit an SMTP server outside.Any computer within my network does a Telnet (hostname or IP) 25 and I get a time out.Port 25 is open on the router.
View 3 Replies View RelatedI have failed to install the Ubuntu recommended driver many times. It's been pointed out that i have a build error in my make.log, (See att) but i don't know what the implications are?
View 13 Replies View RelatedI am tring to get my linksys wireless router to connect to my laptop that i recently installed Fedora 10 on. Well it is actully running of an external HD. Any way when i boot in windows it connects and works fine, but when i try to activate wlan0 it says "Cannot activate network divice wlan0!" "determining IP info failed..."
View 11 Replies View RelatedI'm using an HP 2009m 20" widescreen monitor, and have a Nvidia 8500gt video card. Latest Nvidia drivers from RPM Fusion are installed.
My problem is that the only widescreen resolution I have a choice of in both nvidia-settings and gnome's "Display preferences," is 1600x900. While this is fine for desktop apps, my video card doesn't handle games very well at that resolution.
So, I know my card and monitor are capable of displaying other widescreen resolutions (such as 1360x768) because they work in Windows 7, but Fedora doesn't give me the choice of selecting them.
Is there a file that Fedora uses to determine the supported resolutions? How would I be able to select resolutions that I know are supported (at least in Windows 7)? Can editing xorg.conf give me this ability?
I just looked in my xorg.conf, and it's surprisingly slim compared to others I've seen.
Here:
Code:
Google answers attempted:
# grep lm /proc/cpuinfo
# uname -m
# file /sbin/init
# file /usr/bin/file
I don't think none of the above gives deterministic answer. Since I have 32-bit & 64-bit different system all of above spit out the same info.
what's happened. I now have to log-in 7 times (at least) before I can finally get in to fedora 11. It only started happening at the week-end after a patch was installed. what's going on?
View 5 Replies View Related