Fedora :: Runlevel 3 Video Modes
May 30, 2010
I am running a mainframe emulator on an old HP server in runlevel 3 text only. I have googled a bit but found no information on controlling the text video mode in runlevel 3. When I boot my Fedora 12 system chooses the highest resolution it can meaning my c3270 terminal emulator program (80x25) is in tiny font occupying a fraction of the upper left corner of the screen. I have looked everywhere but can find no mode setting commands for runlevel 3 text only.
View 7 Replies
ADVERTISEMENT
Sep 4, 2010
runlevels 2 -5 are identical in Ubuntu. /etc/init/rc-sysinit.conf is used instead of /etc/inittab for changing the runlevel. But there's no point doing that since the runlevels are identical. The default runlevel is 2, so I tried to find some service I could disable in /etc/rc2.d. I didn't find anything I could work with.
View 4 Replies
View Related
Jan 28, 2011
Does anyone know of a trick or tool that will show me ther directory?Example:neatcmd.bash /dir1/dir2/file1 /dir1/dir2/file1 permissions are 0640Or does anyone know of a tool or command what would convert, for example rwxr-x--- to 0750 suppose it could be scripted, but I was trying to make sure I did not have to re-invent the wheel if something was already out there.
View 3 Replies
View Related
Dec 27, 2009
I use 3 computers attached to a kvm switch (not the hypervisor) and this works fine w/ windows xp and ubuntu 9.04 and earlier. However I am having a problem w/ Fedora 12. It seems that it cannot read the EDID block, so I am not able to set the display above 800x600. There is no xorg.conf file, so I had one generated by Xorg -configure :1. I also tried using the modeline instructions, but the Xserver would not start until I removed modeline. I have tried adding to Section "Screen"
Subsection "Display"
Modes "1280x800"
EndSubSection
but it seems that this is ignored. how can I get the Xserver to set display modes above 800x600 when it cannot read EDID (thru a kvm switch) and it seems to be ignoring settings in xorg.conf?
View 6 Replies
View Related
Jun 7, 2009
Something keeps changing the mode of ~/Desktop, ~/Music, ~/Pictures and ~/Videos to 0777! Anyone know what's doing this, why it's doing it, and how I can stop it?
View 8 Replies
View Related
Aug 18, 2010
I tried to install OpenSuse 11.3 on my brand new pc, which already had Windows 7 proffessional in it, and I went step by step through the installation without changing anything. It didn't work. I tried for a second time and this error message kept popping up: "Creating device modes with udev 2.0436224] [drm: i915_diver_load]*ERROR*Detected broken BIOS with 262140/2644kb of video memory stolen. 2.0436224] [drm: i915_diver_load]*ERROR*Disabling GEM(try reducing stolen memory or updating the BIOS to fix)"
And then a lot of letters and numbers wich make no sense to me. Now the only way I can initiate OpenSuse is with the OSuse boot dvd and on failsafe mode.
View 5 Replies
View Related
Feb 3, 2011
When I execute "init 1" not much is happening! The wireless network drops out, but the GUI is still there. It always worked in previous Fedora releases. What is changed now? Does anyone know how to switch between different runlevels in F14?
View 14 Replies
View Related
Mar 30, 2011
This probably has been asked many times, if yes I apologize and please someone point me to the old post.
If my FC14 would not boot. And I didn't setup the boot menu, How do I get into run level 1?
View 8 Replies
View Related
Mar 28, 2010
I boot by default into Runlevel 3 on my F12 Server. If I need GUI apps then I run startx.The server I'm using (eeeBox eb1501) has a wired and a wireless LAN interfaces. I run two networks and want to be able to connect to the wirelss one without having to start Gnome or KDE just to get the WLAN to connect.IS this someting to do with the NetworkManager or just the gnome-keyring?The wired interface comes up at boot but the Wireless one won't until I start the GUI.
View 8 Replies
View Related
Nov 5, 2010
I don't really want to boot into GDM as I sometimes don't need X. Apart from XFCE, I've got i3 WM. I've changed the default runlevel to 3 so that I can startx. How would I change the WM session from CLI?
View 5 Replies
View Related
Sep 2, 2009
I installed Fedora 11 in VirtualBox, and the initial installation went fine. I then did a system update, and the video driver is broken. When I enter GDM, I have a black and blue screen, with the Fedora logo replicated across the screen.
I don't enter the Grub screen when I boot, and I wonder if there's another way to boot into runlevel 3. At one point, I'm prompted to type "I" to enter interactive mode, but doing this repeatedly still boots me into the GUI.
View 6 Replies
View Related
Nov 19, 2009
I recently switched my server runlevel to 3 and I don't notice any updating of any kind going on, does the updater run in runlevel 3? If it is possible, how do I do it? Is it a service that I need to start? If so, how?
View 2 Replies
View Related
Jan 8, 2010
I'm running a server that boots into runlevel 3. I can ssh into it but I only get a blank screen when I try to connect to the vncserver that's running on it. Is it possible to connect to a vncserver that's running on runlevel 3 or does X have to be running for the vnc to work?
View 1 Replies
View Related
Feb 3, 2010
Running 64-bit Fedora 10 with original installation runlevel being 5.
So, there was this need for working with runlevel 3 for some days, then I've edited "/etc/inittab", changing line
id:5:initdefault:
for line
id:3:initdefault:
And the system went well, restarting automatically on runlevel 3.
Now it needs to restore its original runlevel, that is 5.
I've edited "/etc/inittab" to its original state but the system keeps starting on runlevel 3.
Also, I've tried
# init 5
and
# telinit 5
Both commands load X and the login screen but then when it restarts, it gets back to runlevel 3.
What can be done to get this system back to runlevel 5, automatically, during its INIT process?
View 6 Replies
View Related
Sep 28, 2010
That about sums it up. I have read this, but I am not sure it pertains to me exactly. Any help other than "run at 5"
View 1 Replies
View Related
Nov 18, 2010
I am using Fedora 13. If I boot directly to runlevel 5, the Fedora progress bar goes all the way across and then just stays at 100% and X never loads. I have to hard-restart the machine. However, if I press 'a' to append the kernel arguments and append the '3' to start in runlevel 3, login at the terminal that is displayed, and then type 'startx', everything works perfectly.
View 6 Replies
View Related
Dec 24, 2010
i performed an upgrade from fedora 13 to 14 on my test fedora virtual machine (vmware player 3) and i have this incredible problem: I normally boot in runlevel 3 and i start X only when needed with the startx command.When I want to exit from the X environment I use the "log out <username>" command on the System menu (gnome is the desktop manager). After upgrading to fedora 14 and applying all the available upgrade, this won't work anymore! I'm able to start the X environment but when I try to logout the window/desktop manager got killed but X remain active, the background image is visible on the screen, no mouse or keyboard interaction is possible.
The system is stiil alive, i can login through ssh, but i was not able to do anything. manually switching the runlevel from 3 to 5 and viceversa with telinit doesn't solve the situation: switching to runlevel 5 cause the login screen to be visualized and i' can login in the gnome desktop environment but when i logout o when a try to switch to runlevel 3 I always obtain the same result: X remain active and unusable, it's impossible to go back to a text console. what can i do ? any of you has experienced a similar issue ?
View 14 Replies
View Related
Aug 6, 2009
Booting into runlevel 3 and then issuing the $init 5, command leaves me this."binary handler for windows applications already registered" and the system hangs there.I yum removed wine, thinking that might be the issue, but that solved nothing.
View 12 Replies
View Related
Oct 19, 2009
I tried to install the Catalyst 9.9 driver on Fedora 11 64bit. Only when I was finished with the guide, I read the comments that said it wouldn't work on 2.6.30 kernel.I've written over my old xorg.conf, blacklisted radeon and radeonhd, restarted my machine.When i restarted my machine X wouldn't work ofcourse and all I got is some red coulor in the top of the screen, and no access to terminal via ALT+F2->F6. only way to get access is to add "telinit 1" to the startup line in GRUB
I've tried
Code:
X -configure
and
Code:
system-config-display --reconfig
The first dosen't work and the last dosen't seem to be installed....since i'm on wireless the network has problems to connect....I can pull a cable but not right now.....
I have yet to try:
Code:
[root@fedora ~]$ /usr/share/ati/fglrx-uninstall.sh
View 3 Replies
View Related
Jul 28, 2011
How to auto-login as root? Our target runlevel is 3. Since Fedora 15 use systemd, it seems that all the tricks I did before with initd are deprecated now. I know it sounds inconsiderate to auto-login as root, but I'm setting up Fedora 15 in a closing environment where convenience tops safety.
View 2 Replies
View Related
Aug 1, 2010
I have fedora 13 set up on a HP6715S laptop. Runlevel 3 is a problem, because the capital letters are the size of full stops. Reading a little, I can try a grub vga setting, but I am not keen as my screen is 1200x800 and X cannot set it otherwise, so I doubt grub could. There's KMS for radeon cards, and the kernel can do what it likes. The biggest font supplied with fedora is sun12x22, which doesn't even have a euro sign. I gather I can go to a height of 32. Anyone know of larger consolefonts, or a wheeze to double the size of one of the others, e.g. lat9w-16? setfont-h32 increases height, but not zoom, so it's like a double spaced console.
View 3 Replies
View Related
Jan 25, 2011
ill try to write in english as well as i can.So, my problem is this:Fedora has Nouveau drivers installed by default, and I want to install nVidia propietary drivers.When i try to install Nvidia propietary in runlevel 3, it says that ive to deactivate or unistall Nouveau.
Ok, i do that, but the next reboot, the tty doesnt work (black screen) and i cant access runlevel 3 correctly and i cant install propietary driver. I have looked this in google and i didnt find nothing, so i ask here.
View 5 Replies
View Related
Nov 26, 2010
how do you enter into different modes of vmstat e.g-disk mode,disk partition mode and slab mode.going through man pages i figured out using "vmstat -p <partition> is for 'disk partition mode'.there is no info regarding diskmode and slab mode
View 1 Replies
View Related
Jun 4, 2010
Simple question (I hope). What does the dot at the end mean?drwxrwxr-x
View 3 Replies
View Related
Jun 24, 2010
Just installed Ubuntu 10.04 via Wubi on my laptop. It's looking good so far but to cut to the chase, I only have 2 display modes. This is 640x480 and 800x600. Is there anyway to 'trick' the system into getting a 1200x800 display mode as I have found that graphic drivers for the SIS Mirage 3 are non-existent.
View 6 Replies
View Related
Jul 14, 2010
I'm on Debian Squeeze, my PC has a Radeon HD4770 card. I honestly don't know if it's currently running on OS or proprietary fglrx drivers; I installed fglrx, but the control panel app insists the driver isn't loaded. I'm following these instructions to try to get my screen running at 1280x960x85. It's currently at 1280x1024x85, but it's an old CRT that, for some reason, works fine at 1280x960 but gets unfocused at 1280x1024. I'm following the step "adding undetected resolutions", and here's the result:
Code:
fallingwater@longcat:~$ xrandr
Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 2048 x 2048
DVI-1 disconnected (normal left inverted right x axis y axis)
[code].....
View 2 Replies
View Related
Dec 22, 2010
I can run xrandr and I get the various modes thatwill supposedly work with my monitor.Then, I run xrandr -s 800x600 and the command tells me thathat mode is unavailable, even though it claims that it is in xrandr -s.What on earth does that mean, then?
View 4 Replies
View Related
Nov 2, 2010
I'm using Ubuntu 10.10. How can I switch between text-based splash and GUI splash? My computer is currently showing a purple text based splash screen when booting Ubuntu. How can I switch it to GUI mode?
View 4 Replies
View Related
Sep 14, 2009
I had a problem with the old good ascii/binary FTP transfer modes. I transferred some files (SQL scripting files, in which carriage returns DO matter) using FTP from a windows system to a linux system using filezilla "auto" mode, that should have resulted in ASCII mode for my sql files. These files are well formed and identical to the originals.
Then, someone else picked these files and moved them to another ftp server. I finally found that all <CR><LF> couples have been transformed in <CR><CR><LF>. I guessed that the problem was in the ASCII transfer mode - but, how comes that <CR><LF> => <CR><CR><LF>? I would have rather expected <CR><LF> to become <CR>.
View 2 Replies
View Related
Mar 7, 2011
emacs has these 2 mode for spell checking.
M-x flyspell-mode
Enable Flyspell mode, which highlights all misspelled words.
M-x flyspell-prog-mode
[code]....
View 1 Replies
View Related
