Fedora :: Specify A Particular Eth$ To A FTP Client?
Jun 8, 2010
Outside FTP <--- my f11 desktop connects fine. My behind the same firewall but nat'ed server, which also my FTP server, can not. It seems to be sending out on one internal IP which I'm guessing is the one nat'ed to the outside as my external IPs. Not my main external outbound. So it sends connect via the nat'ed but then makes secondary via main out as it wouldn't be from port 21. i'm sure this outside FTp isn't set to passive and it drops me, but only from the server. Is there a way to bond an output of an application, the ftp client in this case, to a different connection.
View 3 Replies
ADVERTISEMENT
Nov 25, 2009
Is there a good terminal services client available I can connect to my Windows boxes from Fedora12? I am willing to pay for a commercial license if there is a good one
View 7 Replies
View Related
May 20, 2009
I have the following problem:I have to networks in remote places.I have an opnvpn client in one network that connects to the the router (openvpn server).My question is,can i connect the network where the openvpn client is,throught the computer with the client to the other network.If yes,how? (please make it an idiot proof anwser because i have limited knowledge about iptables). I was thinking like forwarding (the router in the network with the openvpn client is also firewalling with iptables) the request of the ip class of the openvpn network to the computer with the client,which masquarades the interface
View 2 Replies
View Related
Jan 6, 2011
trying to create a "local network" by directly connecting an IBM Thinkpad with Debian Linux installed on it to an Alix computer running Voyager Linux. I'm following a "how to" I found to create a music server, hence the requirement. My issue is I can't get a static IP address to be configured on the Debian machine.I've trawled the net and have found the instructions about editing the /etc/network/interfaces and have tried to do this. First I tried to get DHCP working so I could connect the Debian machine to the net and this proved successful. I edited the interfaces file to look as follows:
# The loopback network interface
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
Then I tried adding a static IP address to the machine. As this is a network purely between two machines I made up the IP addres and used 192.168.0.1 and used a NetMask calculator to give me a NetMask of 255.255.255.254 (I told the calculator there would be 2 machines on the network). I then edited the interfaces file as follows:
# The loopback network interface
auto lo
iface lo inet loopback
[code]....
I re-booted the machine (ifdown eth0 followed by ifup eth0 keeps saying that eth0 hasn't been configured - a problem there that I don't understand), but during boot up time it failed to assign the Static IP address to eth0 and made me go into SU mode. To fix it I simply replaced the interface file with the static IP inputs with the file that had the DHCP entries (I'd made a copy of the DHCP file), and re-started the machine. Everthing came up fine. So the first question is how do I get a static IP address to be assigned to eth0 such that whenever I shut down and restart the machine the static IP address is always loaded?
The second question is around creating the network via the cross over cable. From what I've found via Google, all I should have to do is create a static IP address on the Debian machine and a static IP address on the Voyager machine. Once they're connected by the cross over cable they should see each other. Is that correct, or do I have to do anything else?
View 2 Replies
View Related
Mar 9, 2011
I am writing a TCP server in C, and the server listens to incoming client connections and accepts them. It then creates a thread to handle the client. The clients are expected to only receive data from my server and not send any data. So if I use a select() call with a recv(), I believe that the recv() will just block forever since there will not be any data coming from the client. If I use a non-blocking recv(), then this will just return a 0 which tells me nothing because the client is not expected to send any data. I am not sure if I have misunderstood some socket concepts, but I need a solution to detect when the client has disconnected so that I can close the socket and stop sending data to the client. As I understand it, simple ACKs etc are not captured by the recv(), and only data sent by the client will cause recv() to return a non-zero value, so I am not sure how to know when the client has disconnected.
View 7 Replies
View Related
May 26, 2011
I have configured server ubuntu 11.04. Everything works fine, but there is a need for some clients to connect local hard drive. What should I do? How and what modules are added to the ltsp-image? How to register in the fstab on the client? Maybe I'm going the wrong way?
View 1 Replies
View Related
Sep 24, 2010
I am attempting to use a PXE and nfsroot to boot fedora core 13. When my virtualbox image boots, I get the following error. view the screen shot.I have the following entry in my TFTP entry to boot this system:
Code:
prompt 1
default linux
timeout 30
label linux
kernel vmlinuz_fc13
[Code]..
View 10 Replies
View Related
Jun 18, 2010
Have not done this before. What is the best way to install the Oracle client for 10g on a Fedora 13 machine?
View 4 Replies
View Related
Aug 1, 2009
Anyone know how to compile fedora core to be used as a thin client / dumb terminal with a small kernel?
View 4 Replies
View Related
Jan 29, 2010
ive tried to disable portreserve and dnsmasq, ive tried amarok, vagalume, rhythmbox, songbird to login to last.fm but i cant, ive gooogled for it. from the web browser its works
View 3 Replies
View Related
Jun 1, 2010
I am new to linux/fedora. Got 1 question. What is the best torrent client for fedora/linux?
View 5 Replies
View Related
Jun 24, 2010
how to add dhcpd client in fedora
View 5 Replies
View Related
Dec 24, 2009
I'm accustomed to using the tightvnc client to view servers running vnc. Since installing Fedora, I see that it uses Tigervnc for everything, and there is no tightvnc client available. Normally, this wouldn't be a problem, especially since Tigervnc seems more functional. The problem I'm having is that there are "artifacts" when using tigervnc to connect to one of my servers. It's so bad, that I can hardly use it to view that server. I've tried to change some of the options in tigervnc, but the app just crashes when I try to save the changes.
Anyone else experience this problem with tightvnc? Anyone tried installing one of the old tightvnc packages from rpmfind.net or rpm.pbone.net?
View 11 Replies
View Related
Jan 21, 2010
I have both windows and fedora 12 and have noticed I get much faster downloads with windows. Is there a bit torrent client that works extremely well with fedora? I have transmission and it is very slow. I have tested with the same exact files and windows is so much faster.
View 13 Replies
View Related
May 12, 2010
Do we have netdump client for Fedora 12 ?
I have downloaded a netdump-server package for the my netdump-server but can't find
netdump client for my FC12 client.
When I installed it via yum, it says code...
View 3 Replies
View Related
Apr 12, 2011
My machine, running FC13, is accessed by a NX client / server (freenx-server.i686 package installed). Using the NoMachine NX client, when I launch the sandbox program (policycoreutils-sandbox.i686 package), for example,sandbox -X xtermthe process dies without displaying a screen. The problem comes from the Xephyr server that complains : 'Xephyr cannot open host display. Is DISPLAY set ?'. Xephyr is called in the bash file /usr/share/sandbox/sandboxX.sh by:/usr/bin/Xephyr -title "$TITLE" -terminate -screen $SCREENSIZE -displayfd 5 5>&1Is there a way to solve this problem ?
View 2 Replies
View Related
Jan 26, 2011
I am trying to make FTP server on Linux machines(Fedora/Centos) . How can we install and configure FTP?
View 1 Replies
View Related
Feb 8, 2010
ive tried to disable portreserve and dnsmasq, ive tried amarok, vagalume, rhythmbox, songbird to login to last.fm but i cant, ive gooogled for it.tried from the web browser and its [URL] i have a router and i have tried an ubuntu laptop and its working here is my log, but the last date is 090128 ??
Quote:
090128 21:45:51 - 140172703823872 - setState(665) - L4
Radio state: State_Stopped
"090128 21:45:52" - "-2143815680" - virtual void ScrobblerPostRequest::request() ( 855 ) - L4
[Code]....
View 1 Replies
View Related
Apr 13, 2009
Requirements
1) Can be integrated into web browser (so when click on chat the a window will open for chat with technical support executive:- It will be basically used for TS)
2) Must Have option to transfer file between costumer and TS execut
3) No installation on part of client
Basically it chat support as any other company on net... Like Symantec and all(Not That big thought)Any one know or have experience in this(setting up is relatively simple for me i need info on any particular software that i should try)Currently thinking about experimenting with ejabber... If that a bad choice i will loose lot of time and be behind schedule by miles.
View 3 Replies
View Related
Sep 15, 2009
This is the first one of probably many posts as I am new to Fedora having lots of questions. This one is about the openvpn client which is used by me to connect to my company network. Thanks to the Fedora FAQ it was easy for me to set up the client and establish a connection. There is just one problem every time I open a connection I am disconnected from my local Internet. I was using openvpn on my Windows XP PC before and there was no problem keeping two Network connections, the (W)LAN and the vpn tunnel. Does anyone know how to solve this? I am utilizing the latest Fedora 11 release and configured openvpn client via the Network Manager GUI.
View 2 Replies
View Related
Sep 22, 2009
I have setup a 389 ldap server on fedora 11 that works fine on linux clients. Now I want to connect windows xp clients on it. I made it using pgina, but I would like to make it work without third party software.
View 2 Replies
View Related
Oct 10, 2010
We have several FC machines (from 6 to 12) that use an OpenLDAP server running on Centos 5.4 for authentication. I have now tried setting up a FC13 workstation. I notice that the authentication GUI has changed and wants me to use Kerberos or a TLS enabled server. Is there a way to get FC13 to behave like FC12 in this respect. Or (less desirable) what changes do I have to make to the server to accommodate FC13?
The workstation knows who the users are, but will not authenticate if they try and log in.
[URL]
but it didn't work for me
View 11 Replies
View Related
Nov 26, 2010
Calculating the available bandwidth methods IGI/PTR,PATHLOAD,SLOPS,PACKET PAIR...I gone through above methodogies ,when i finish one methods(IGI/PTR) i came to know,one application should run in client side and another application should run in server side (i.e,) Internet Service Provider side,In IGI/PTR method ./ptr-client.c & ./ptr-server.c is there .,if we want available bandwidth,I Should run ./ptr-client.c (in myside)correspondingly ./ptr-server.c then only we wil get a availble bandwidth...My need is without run any application on the server side ./ptr-server.c like that,but I should develop the application only on client side (in my routerside based on linux).. 1:whether it is possible to get the available bandwidth run application in client side only?.if possiblehow i implement the code in client side( only )for getting the available bandwidth ...whether any source code is available?
View 2 Replies
View Related
Dec 26, 2010
I have FC14 running NIS master and the Solaris 10 (192.168.0.10) client is able to use authenticate. However, when I try to change the passwd (via yppasswd) on the Solaris host it reports "Permission denied".
On the FC14 host, the syslogs show that the passwd is invalid:
Code:
Dec 26 22:09:49 linux rpc.yppasswdd[2031]: update test (uid=502) from host 192.168.0.10 rejected
Dec 26 22:09:49 linux rpc.yppasswdd[2031]: Invalid password.
The Solaris host has been reconfigured to generate md5 passwds and the linux host the same (via authconfig). Indeed when I set a local user's passwd on the Solaris host, the passwd (the shadow entry) looks like a MD5 passwd (starts: $1). I don't know if this is related to my NIS problem, but when I generate the SAME passwd on linux, the shadow entry is different.
View 2 Replies
View Related
Jan 8, 2011
I use many distros with Amsn or Emesene with both and in all distros slow file transfer speed. There Any knows a client with acceptable transfer speed?
View 2 Replies
View Related
Mar 3, 2011
I have a problem with getting my fedora 14 laptop to connect to my fedora 12 server that is hosting my smb HP Deskjet 5650 printer. The error that I get is the following: CUPS server error. There was an error during the CUPS operation: 'client-error-not-possible'.
I have been able to get my daughters Ubuntu laptop and my wife's Windows XP laptop to connect and print without a problem.
View 2 Replies
View Related
Mar 24, 2011
I am trying to install the Folding@Home client on my x64 fedora 14 box. I am used to in ubuntu where all one would do was install the package "origami" and you just send 2 commands after to set name/team and the initial start and that was all.
such package doesn't exist for fedora, or so it seems.
is there such a package in the fedora world? if not, how do i go about setting it so it is installed and automatically runs upon startup?
View 5 Replies
View Related
Jun 15, 2011
I'm running a Fedora 13 print server, with CUPS package:
Whenever I try to print from a Windows (XP or 7) client to a Samsung ML 3050 printer, the printer pauses itself with the error:
I setup Windows clients with the following URL:[url]
Output from log file attached. This used to work fine previously from Windows, and I can still print from Linux clients.
View 4 Replies
View Related
Mar 10, 2009
I installed the vncserver rpm on Redhat EL 5.3 after the initial installation. I am able to run $vncserver and can connect with vnc client also. But getting black screen all arrond the xtem and also not able to launch xclock. Here are the error messages in .vnc log
Couldn't open RGB_DB '/usr/share/X11/rgb'
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/ocapma:1
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
[code]....
View 3 Replies
View Related
Feb 5, 2010
Fedora 12 64bit. I need nbd-client which is supposed contained in kbd package.
$ yum list kbd Code: Loaded plugins: presto, refresh-packagekit
Installed Packages
kbd.x86_64 1.15-9.fc12 @fedora
kbd already installed.
But I can't find kbd-client;
[Code]...
View 2 Replies
View Related
