I have an installation of Fedora 10 that has been running wonderfully for months, ever since I bombed my 9 installation trying to install Apache Tomcat (I really just wanted Apache, live and learn). I finally decided to brave the attempt to install Apache 2.2 again because I have a little more instruction to go by. Apparently not enough to deal with this snag though, at least not the way I want.
Install went fine, but I couldn't start the service. Following the error trail I found that it was binding IPv6 to port 80 and wouldn't allow any other ip or localhost to use it. I disabled IPv6, don't need it, I'll learn about it later.
Now when I try to connect to the localhost at port 6667 using irssi, i get the following error message saying it cannot connect to localhost port 6667
13:48 -!- Irssi: Looking up localhost 13:48 -!- Irssi: Connecting to localhost [127.0.0.1] port 6667 13:48 -!- Irssi: Connection to localhost established 13:48 -!- Error: bind: Permission denied 13:48 -!- Error: listen: Bad file descriptor 13:48 -!- Irssi: Connection lost to localhost
A similar looking error comes up when I try to telnet localhost at 6667. Also, I get a selinux warning saying SELinux is preventing /usr/sbin/bitlbee "name_bind" access .How do I check if bitlbee is listening to port 6667? Btw, I am using fedora 13, I have selinux running in enforcing mode and the firewall running. I have set the port 6667 in the other ports tab of "system-config-firewall" (I am hoping that this will open that port).
I'm trying to connect to url, but the browser is unable to connect to the localhost; my OS is F11, if someone have encounter this problem? i was able to connect to the localhost when i had F6 OS.?
I am trying to get my own email server set up, and so far its been going pretty smooth, The only thing that is not working right now is receiving emails. I can send email just fine, and when they are sent they are even sent from the proper addresses, but when I try to send an email to my domain, it does not go through.
I have the port forwards set up on my router to send all traffic on port 25 over to my mail server, I can telnet to the smtp server from the localhost just fine, but when I try to telnet from another computer on my network it gives me this message
Quote:
So I ran a netstat -an on my mail server to see what ip address smtp is listening on and I get this result
Quote:
Now most guides I find for this problem just say to un comment the line in the master.cf that says "smtp inet n - - - - smtpd", the problem is that line is already uncommented and I am still not able to telnet to port 25 from any machine on my network.
Here is my main.cf, tell me if there is anything that I can do.
I'm running Fedora 12 on x86_64. I've installed squirrelmail, along with dovecot on my office server, and cannot access it through http://localhost/webmail. I have followed all the configuration steps I could find (including http://www.server-world.info/en/note...12&p=httpd&f=7).
I know that everything else is working (I can send and receive mail, access IMAP mailboxes, webserver is working), browsing to
http://localhost/webmail
just gives me
"Problem loading page"
in Firefox. Sometimes, however the message is "Unable to connect."
I will add that I already tried installing Squirrelmail on another (i686) machine and had exactly the same problem.
/var/log/httpd/error_log says:
File does not exist: /var/www/html/squirrelmail
This makes it seem like aliasing is not working somehow.
For backup and pre-functionality purposes, I need to simulate a VirtualHost in my Fedora (14) machine. I found some interesting links to carry out that process but with an IP fix.So, how can I simulate a VH through a localhost with a dynamic IP?
Last time I rebooted, sendmail & dovecot started from init and everything worked. I needed to reboot this weekend [new videocard] & yum had given me a new kernel etc.Now.2.6.34.7-56.fc13.i686 running Thunderbird - with 2 accounts chuck@otherserver.com and chuck@localhost. The "otherserver" account works fine. Localhost won't pull in the mail.
i have fedora 11 installed in my laptop and apache server by default. after starting httpd and mysqld services i was able to access localhost through browser.(e.g. [URL]). before installing phpMyAdmin everything goes right. after installing phpMyAdmin it created problem in localhost. now typing [URL] it opens joomla site but without images and without intending of content. when i type [URL] in browser it ask for user name and password. i already provide user name(root) and password(my_root_password) in /etc/phpMyAdmin/config.inc.php. but it doesnt open.
i have installed apache and php in my fedora 11 system and httpd works fine except that it doesnt have internet connection for example rapileech doesnt work it says "cannot connect via port 80" and if i put an rss feed collector in a website it doesnt work but everything else works fine , also when i put the same file in a shared web host it works fine
Made some network and hardware changes, and now I can't get the mailserver to work. It seems that sendmail can't loop to itself on 127.0.0.1. When I nmap localhost, I find that port 25 isn't open.
Naturally, nothing has changed on my system except for different routing, interfaces, etc.
So the question for sendmail gurus,is where should I be looking?
I can not use nfs from F10 client to F12 server. nfs mount on F10 to F12 times out anf nfs4 mount gives "mount.nfs4: mounting localhost:/home failed, reason given by server: No such file or directory" I have tried to close firewall and set selinux to permissive mode on both client and server with same result. Samba works fine. On server [root@flokipal ~]# mount -t nfs4 localhost:/home /media/tonlist mount.nfs4: mounting localhost:/home failed, reason given by server: No such file or directory
but
[root@flokipal ~]# mount -t nfs localhost:/home /media/tonlist [root@flokipal ~]#
I have a problem with one of my new OpenSuse installation. I install ntop on this machine so the port 3000 become open, but when i want to use it on a other pc, it cannot see the open port. I really don't understand why i cannot access this port.
I disabled firewall to make sure everything pass.
Here my ntop on my localhost
Nmap done: 1 IP address (1 host up) scanned in 0.07 seconds
Here my ntop from another host
Nmap done: 1 IP address (1 host up) scanned in 0.07 seconds
I have a crontab on my vps running every minute that checks to see whether or not a certain port is open on localhost. If the port isn't open, it should run the php script to restart the program. However, I require the use of screen to be able to interact with the program whenever I reconnect to the vps through shell.The problem is, screen is being a pain by saying "Must be connected to a terminal."This is the php script:
I have this package dependency question for a while. I have brand new Squeeze system. I selected desktop during installation. Gnome is default system but I turned off gdm3 and uses fluxbox as window manager. I understand if two packages are tied together funtionally so that removal of either package terminates one feature. Above cases, many small packages only depends on the core packages. The core packages work fine without games, other programs.
There are so many programs that I want to remove in the system. For examples, ekiga is a VoIP program that I never use it. When I tried to remove it using apt-get or aptitude, it suggests entire gnome packages will be removed also, which is illogical. The only solution I found is I need to manually remove the package files. I haven't tried it yet.
I want to do a simple port redirect, i.e. whatever comes trough whatever interface on port AAAA will get redirected to port BBBBI thought that iptables -t nat -I PREROUTING --source 0/0 --destination 0/0 -p tcp --dport AAAA -j REDIRECT --to-ports BBBBhowever it doesn't work, e.g. nc -v -w2 -z localhost AAAA gives:
nc: connect to localhost port AAAA (tcp) failed: Connection refused while nc -v -w2 -z localhost BBBB
Can anyone one give me some pointers please, for talking to a serial port, if I use cutecom it always returns "could not open /dev /tty0 or 1 or 3 or 4, even tried ttys0 etc
I have been struggling with this for the past two days and I can't seem to figure it out.SIMPLE GOAL: use subdomains with my wildcard Rapid SSL cert on Apahce2. This is not a chained certificate.Currently my default SSL virtual host, listening on 443 works fine. So, https://www.myDomain.com is recognized correctly by all browsers. But, the below virtual host listening on port 1025 is not coming across to the browser securely. The page renders, but the browsers do not see it as encrypted SSL.
I tried to see if my port was open but got a message saying Error: I could not see your service on 58.164.165.88 on port (80) Reason: Connection refused could someone us out here
I have installed a sendmail server on fedora 10 I try to configure my sendmail server as a mail server to send outgoing email using port 587( because port 25 is blocked). after finishing configuring my sendmail server, i checked out my sendmail server using telnet localhost 587, and it worked fine as below code...
I have tried two different ways for user name: name, or name@mail.mydomian.com, but not working at all, the two results are the same. PS: I have test port 587 and can use port 587 and Kmail to send outgoing mail using other external relay server
is my wrong configuration for sendmail server or kmail?
It appears that my ISP is blocking port 80, so I can't set up a proper website on my home computer. I'd like to choose a different port to use (they block 443 also), and I'm not sure how to do this with Fedora (or any Linux flavor for that matter
Currently Im having a syslog server that consolidate firewall logs on port 514 udp. Im also having a IDS device that I wish to push its logs to this particular syslog server so that I can retrieve my IDS logs on this server as well.
Is it possible to do so?Having syslog listening on port 514 for both firewall and IDS logs? If it is possible will the logs be recorded in a single log file?Or will it be recorded in a separate log file ie. firewall.log, IDS.log etc?? I wish to have them in separate individual log files or else there will be hard time segregating the log entries in a single file. Can anyone advice on how to achieve this??
I have a Fedora 10 box I am using as a web development server. I have most everything working. I am trying to use sendmail as an MTA for sending out emails and I am having problems having the messages delivered. The error always comes up as connection timed out. I have attempted to telnet to many different MX server on port 25 from the Fedora box and each time I try I never get a connection.
This made me think that it might be something with ISP doing port filtering to prevent SPAM or something, however I can telnet to port 25 from different computer on the network. I also have stopped IPTABLES in an effort to try and resolve this issue and am still getting connections timed out.
I have run TCPDUMP while trying to telnet to port 25 to an MX server from the Fedora 10 server and all I see are out bound packets. I also explored the idea that I might of had some kind of weird routing issue on my firewall. I am currently using a Juniper NetScreen 5GT with an ANY/ANY outbound rule. I do not currently have SMTP open on the firewall as I am not planning on accepting mail here.
The best I can figure as telneting to port 25 from windows computers on the same network as the Fedora server works just fine, yet it does not work from the Fedora Server is that it must be some thing on the Fedora box itself, but I have no clue as to what I could be.
I'm running some vm's in FC12 with kvm-qemu and using virt machine manager. I'd like to have some ports automatically forward on startup and be able to add redirections on the fly. Redirection on the fly is talked about here, but I am getting lost on what should be basic instructions.[URL]
As far as startup, In the past I just ran qemu from the cli and manually specified redirection with redir. I can't figure out how to do it with The virt machine manager which I am using to start my VM's now. I do not want the guests to see the host. From cli startup without virt machine manager, it looked like this: qemu -m 256 -hda vm.img -redir tcp:5555::80 -redir tcp:5556::445 &
Have basic LAMP setup on 9.10 box. I want to have a publicly accessible website AND I want to have phpmyadmin available. The only thing is I would rather not have the phpmyadmin interface available on the internet. I usually open a ssh port forwarded tunnel when I need to use phpmyadmin on this server. I want to add a directive to make phpmyadmin bind only on localhost. I have found the phpmyadmin config file in /etc/apache2/conf.d
phpmyadmin.conf -> ../../phpmyadmin/apache.conf
I have tried adding some LISTEN directives, but apache does not like my directives-- I am obviously not doing it right. I have looked for a bit on the internet and can't find out how to disable external access to a configured site in Apache.
Instead of XAMPP or LAMP, I installed a local web server to my Ubuntu 10.04. Apache and phpmyadmin works well.
I copied the files of my Joomla website to /var/www folder. When I go to administrator panel, it works. But when I type in the browser "http://localhost/[folder_name], a blank page appears and nothing else.
