How can I set permissions for users within the share?
Example: I have a share called Programming and some user can create folders within it most others can not, can read the documents.
How do I set permissions?
I've got my Samba shares up and running. I can stream files from the server, I can create files on the server, and I can copy files from the server.
Running a Windows program (from a Windows box) directly from the Samba server, however, is turning into a nightmare. I'm getting Access is Denied errors from the Windows box, yet I can copy/create/etc from the entire directory with no problems.
Are there any special permissions I need to run EXE files from a Windows box, located on a Samba share? I've already chmod'd everything to 777, and I show full access when ls -Z is used.
I'm trying to set up my samba server so that all the shares are visible to everybody but that some shares can only be accessed by certain users. I have a folder Video that everybody can access without a username or password. I now want to create a share that only I can access called webserver.
This is my samba.conf
Code:
[global]
dns proxy = No
netbios name = DATABOX
guest account = nobody
restrict anonymous = no
browseable = yes
server string = server
workgroup = WORKGROUP
public = yes
security = share
[Video]
Writeable = yes
Path = /media/data/Video
Public = yes
[webserver]
Writeable = yes
Public = no
User = malteser
Path = /media/data/Webserver
Windows does not let me enter a username or password. I'm pretty sure this used to work.
i have setup a samba server and created samba shares on it, i have configured the samba server to authenticates users from a windows server 2003 DC,
i have 2 shares call IT and MYSHARE, I want to give read and write permissions to sevaral users to those two shares and read only permisson to all the other users.
i tried editing the smb.conf file with the following settings , but no one can write or modify the files in the shares including the users specified in the
write list = cweerasinghe,njayarathna.
[IT]
writeable = Yes
browseable = yes
public = no
comment = IT share
[Code]....
how can i give access to the write list = cweerasinghe,njayarathna users to
read, write and modify the files in the shares ??
I have a couple of user accounts where each member belongs to a group i have created: Each user access the share using their own user account credentials.
How can I configure Samba in a way so that each modification done on the share gets the owner of the user and my group instead of the user and the users own group? I would also like the access rights to be 770 to each modification.
In other words, today each modification by "userA" get the owner "userA.userA" and I would like it to be "userA.MyGroup" with "rwxrwx---" permissions.
My samba-shares are mounted in fstab. Everything works fine except for one small issue: when copying files from the local PC to the share the files are copied but the timestamps and permissions of the files are not. Instead a message "operation not permitted" appears. 'root' on the client can copy files WITH timestamp etc, a normal user cannot.
Below the line in fstab on the client and smb.conf on the server.
I've installed Ubuntu Server 7.10 Gutsy and Webmin 1.500 on it. The thing that I want to do is: I want to share a folder an sub folders for windows users ( guest user) I should modify those folders from my ubuntu desktop 9.10 karmic they are all same folders. Is it possible? if yes how can i make it. you can tell from webmin or samba configuration file.
View 8 Replies View RelatedI have Ubuntu server 10.04 joined to a domain using Likewise Open. I can login using my domain credentials and have added my domain account to the sudoers file. Now that I've got it joined to the domain I want to add some samba shares and have domain members use their accounts to access them. However, no matter what combination of my domain name and the domain user or group I use in the valid users field it won't let me in. What's the proper way of inputting a domain user or group in the valid user field?
This is the entry I'm using for the share:
Code:
[testshare]
path = /srv/testshare
valid users = @"Domain Name+Domain Group" (Have tried many things here)
public = no
writable = yes
printable = no
create mask = 0765
When I try to add a user to samba (using the GNOME UI) in F12, after enter all the information and click OK.it will just hang for about 20 seconds, and then do nothing. Window is still there, I click OK again and same thing.heres the steps i followed:
1) click preferences, Samba Users...
2) click add user
3) select user "joe" (example) from drop down of users
4) enter "joe" windows user name
5) enter password for joe (same as user password)
6) click OK
7) hangs 20 seconds then nothing.window is still there.click OK again same thing no user added
I wan't whatever file/folder that ends up in the public folder to automaticly be open to whosoever access that folder. Right know I have to "chmod -R 777 file/folder.* "
View 4 Replies View RelatedI have a server which currently has a samba share for a printer and my home directory. Both have been working fine for a while now. I have a drobo (which is like a little USB RAID machine) connect via USB to the linux box. While trying to share it via samba I get weird messages from my windows machine (see screenshot). I have tried to share multiple folders on this drobo and no luck, all the same result.
I also tried a symbolic link, no good.
Here is a screen shot
http://aivila.com/temp/screen.jpg
Here is my smb.conf file:
Code:
[home]
path = /home/savona
read only = no
[Code]...
New fun from M$, we have started to test Win-7 on a few machines, and while it worked flawlessly in XP, Vista and Win-7 beta, logging on to the share (AD) from a Win-7 RC doesn't work.
View 1 Replies View Relatedi have an old desktop that i have decided to use as a central point for localhost/website files. I have 2 laptops, a ubuntu and vista, and i want them both to be able to see the public_html folder on my desktop, and be able to create/update folders and files.
I have set up the samba sharing and that's working fine, but when i create folders using my laptop, they are not writeable to the desktop or other laptop because my laptop is the creator. Is there a way that I can set it so that whenever folders/files are created from either laptop, they have full permissions?
When I create a new folder on my ubuntu machine and share it with my windows 7 machine using 'net usershare add <dir> <path>', I can't get write perms in Win 7. It keeps giving me a "You need permission to perform this action'. I've chmod the folder to 777 but still no luck.
The funny thing is, it was all working fine until I tried to add a new usershare yesterday (Can't think what I've changed). I use this sharing method to share all of my development /var/www/ folders so I can work on them from my win machine.
I have had a few problems with my samba smb.conf, and it nuked and rebuilt yesterday. I'm fairly new to the Linux game, and this permissions problem has me baffled.
I am trying to set up a Samba share on one of my machines where I am the owner and a special group manages permissions for read-only access ( me:specialgroup ). If I log into the share as me, there is no problem (I have read/write privs as per usual). However, I am not able to log into the share using any of the group members (there is only one currently). That user is not able to access the share (failed to mount).
The folder (which is the share) is owned by me:specialgroup and the permissions have been forced down the folder. Samba is set to Share this folder with no guest or others write access.
I have set up a computer to use as a file server using Samba. I attached a 1TB hard disk to it and had the system to mount it automatically. I have 4 user accounts which will be able to access this network share. An administrator account is called "server". I'll call them user1, user2 user4. This is the folder structure:
+-/mnt/FILES
+-BACKUP
backup files (accessible only to "server" user)
+-MUSIC
music1.mp3 (read only files for all users)
music2.mp3
[Code]...
I don't know which groups I should create. I'm having a hard time setting file/folder permissions. And I wanted to know how to set Samba so that it won't ask for a password when accessing public/group files, but asks for it when accessing private user files.
if i try to connect to my samba server ( share ) from my windows xp ( or vista, i've tried both ) it says, that the network share cannot be found. i've installed all necessary rpms on my fedora 10, necessary for running a samba server:
Quote:
[root@********* samba]# rpm -qa |grep samba
samba-common-3.2.8-0.27.fc10.i386
samba-3.2.8-0.27.fc10.i386
samba-winbind-3.2.8-0.27.fc10.i386
after that, i've configured the smb.conf file, as follows:
Quote:
[root@*********** samba]# cat /etc/samba/smb.conf
#======================= Global Settings =====================================
[global]
# ----------------------- Netwrok Related Options -------------------------
workgroup = GROUP
[code]....
there is no iptables definition, or any other firewall installed, neither on the server nor the client. i've read through alot of howtos an manuals, but was not able to find the problem.
I don't think it has anything to do with the config file. More to do with SElinux. I need to know how to configure SElinux so I can see my samba share when SELinux is on. When I setenforce 0 I can seen all the files and folders set it to setenforce 1 cannot see anything.
Here is the output when I ran [root@fileserver /]# getsebool -a | grep smb
allow_smbd_anon_write --> on
smbd_disable_trans --> on
These two options were off I tried turning them on.
This is another one of the commands I tried running. I did change a few options but I am not sure which I do need to change. I am running a stand alone server so I don't need the DC option.
[root@fileserver /]# getsebool -a | grep samba
samba_domain_controller --> off
samba_enable_home_dirs --> off
samba_export_all_ro --> on
samba_export_all_rw --> off
samba_share_nfs --> off
use_samba_home_dirs --> on
I can also post a copy of my smb.conf file too.
Running samba-3.5.6-71.fc14.x86_64. Why cant I access samba share by short-hostname from win7. When I ping short-hostname, the answer is the actual ip and short-hostname.mydomain.com
sa pinging short-hostname does work, but accessing it from start-run does not! Accessing by ip or short-hostname.mydomain.com works fine. ssh by short-hostname from win7 works fine too.
My Fedora router has three nic's, one for the internet, one for lan and one for the wireless network, which uses hostapd. I have set up samba in order to enable windows file sharing from wireless lan to wired lan. Using the samba documentation I have enabled the wins server and wins proxy which should allow met to browse the shares across the networks, which theoretically should do the trick but it doesn't work as expected. I can see the pc's from the other network using windows neighbourhood, but as soon as I access one of them it fails saying that "network path could not be found" or something like this. Tried using windows 7, windows xp and linux for browsing but the result is the same. As firewall I have shorewall and the samba specific ports are enabled for both networks. How to setup samba for inter-network browsing?
I have attached the global config section from smb.conf file:
Code:
[global]
server string = Samba Server
interfaces = eth1, lo, wlan0
bind interfaces only = Yes
security = SHARE
log file = /var/log/samba/%m.log
max log size = 50 .....
Winxp and Win7 - conencting to a Samba server.
Everything is working fine except for one thing .
To best explain this problem .........
Share name - "admin-public"
Everyone can access it.
Everyone can create new docs and edit / save them.
BUT - only the originator can edit / save.
Everyone else has read only access!
what I am trying achieve is read/write access for my MS domain account and read-only access for everyone else. In smb.conf I have this:
Code:
map to guest = bad user
usershare allow guests = yes
username map = /etc/samba/smbusers
[code].....
I can access this fine with my MS domain account, what I can't work out is how to give others read-only access to the same share. I guess I could create a second share for the same folder with a different name and permissions, but that seems a bit clunky and I'd have to remember to pass on a different name to the one I am using. I also tried using the Nautilus right-click "Sharing options" and then setting the folder permissions. This works fine for giving others read-only access, but loses capitalisation of the share name and doesn't seem to recognise my MS domain account as being valid.
I have a samba shared folder in my flash disk. Yesterday I installed ubuntu 11.04 and now sharing is not working any more. I do the usual procedure (that worked so far), I right click my folder > sharing options and tick "share this folder" as well as "Allow others to create and delete files in this folder" but I dont get the usual messages asking to add permissions automatically.When I try to mount my folder in another pc with linux, I get permission denied and that the folder is only readable and in another, windows cannot find the network path to my folder.My folder has about 10.000 files. asking to add permissions automaticallyI created another folder on the same flash and when I create share I get the message asking to add permissions automatically but it is not visible either. I even cant see my folder in "my places" > network, so it is not a matter of the mounting command
View 1 Replies View RelatedIn my work I want to build up a Linux based network, where windows and linux clients are going to share a Thecus network drive.Each client will have specific permissions for accessing the samba shares. I have installed Ubuntu SRV 10.4 with gui and webmin.
View 1 Replies View RelatedCertain files are being created with ACL permissions attached. I am not sure why. Is there a smb.conf option that will stop this from happening?
View 2 Replies View RelatedI have set up a Samba share via my CentOS 5 server (the samba share is actually a mounted filesystem, not local machine space). I have been successful in adding permissions for my windows users within the smb.conf, but have an additional need that I cannot figure out. I would like for my Windows administrators to be able to create folders and assign permissions from their machines (and their Windows GUI). Ultimately I need the folders on the Samba share to behave correctly when Windows group permissions are applied by these administrators.
When the folders are created, the "Everyone" identity cannot be deleted and sometimes "Creator Owner" or "Creater Group" show up. I have seen several threads start down this path, but haven't seen a definite answer (I may have just missed it!).
I just recently constructed a computer to create a nice Fedora Linux server to replace a Mac Mini server that I have been using for a few years. I'm attempting to create a Samba share for my machines, a Windoze 7 machine as well as a couple MacOS 10.6 machines. I've set up Samba, started the service, allowed Samba in the firewall, and used system-config-samba to set up a share with a user. I created a User called "space", and a share /media/peliculas/Movies (a mounted hard drive). When I type in \IP_ADDRESS in the address bar in windows 7, I get the option to log in. I log in correctly and I see two directories "space" and "Movies." Unfortunately when I click on one of them I get the following error message:
Windows cannot access \IP_ADDRESSMovies Check the spelling of the name. Otherwize, there might be a problem with your network. To try and identify and resolve network problems, click Diagnose. I also get something similar when I attempt to connect with my mac machine. Using "Connect to Server" I type in: smb:\IP_ADDRESS, and login, I have the option to mount "Movies" or "space." If I select any of these, I get the following error message: There was an error connecting to the server "IP_ADDRESS." Check the server name or IP addres, and then try again. If you are unable to resolve the problem contact your system administrator.
Also, if I type 'smbclient -U space -L IP_ADDRESS' I can see the "Movies" in the "Sharename." At this point I'm not sure what else to do, and have been trying to figure this out for the last few days (losing sleep due to being baffled). The only thing that I can think of is that I have something wrong with the smb.conf file. Here is what it currently displays:
Global Settings
workgroup = WORKGROUP
server string = Samba Server Version %v
log file = /var/log/samba/log.%m
max log size = 50
[code].....
One last thing, when I check the log files, there are error messages that state: smbd/service.c:1009(make_connection_snum) '/home/space' does not exist or permission denied when connecting to [peliculas] Error was Permission denied --Windoze 7 and MacOS 10.6 log files
If I want to add Windows & Mac users as Samba users, must I first add them all as Ubuntu users? If so, since none of the other users will actually be working on the Ubuntu Server, how do I disable the other non-admin users on the Ubuntu Server login screen. I am using Webmin to administer some server settings, and command line for others.
View 3 Replies View RelatedI'm trying to setup a Samba network share with a Fedora Directory Server backend. This will be used primarily for Windows users to authenticate before accessing the share. I am using Fedora Core 10 and have all of the latest updates installed. When I try to connect from a Windows machine, I am prompted for a username and password. I enter the username and password of the account I created in Fedora Directory Server in OU=People. The credentials are rejected. At the same time in the log file I see this:
[2009/02/24 16:50:16, 3] auth/auth_sam.c:check_sam_security(282)
check_sam_security: Couldn't find user 'Administrator' in passdb.
[2009/02/24 16:50:16, 2] auth/auth.c:check_ntlm_password(318)
check_ntlm_password: Authentication for user [Administrator] -> [Administrator] FAILED with error NT_STATUS_NO_SUCH_USER
Administrator is the user I created in Fedora Directory Server. If I perform an ldapsearch it will find the user as uid: Administrator so I know it is able to be looked up in FDS. But I'm guessing that's not the problem.
[Code]...
I have configure few folders access by 3 users, In common folder only users that create that document can do changes. The rest of the users can only read the file but can not do changes. Ownership of the folder is admin, group is sambashare which already have the access create and delete files. All the 3 users already in sambashare main group, and they only can edit the file that they copy or create to the common folder .........
View 5 Replies View Related