I can run xrandr and I get the various modes thatwill supposedly work with my monitor.Then, I run xrandr -s 800x600 and the command tells me thathat mode is unavailable, even though it claims that it is in xrandr -s.What on earth does that mean, then?
View 4 RepliesI'm on Debian Squeeze, my PC has a Radeon HD4770 card. I honestly don't know if it's currently running on OS or proprietary fglrx drivers; I installed fglrx, but the control panel app insists the driver isn't loaded. I'm following these instructions to try to get my screen running at 1280x960x85. It's currently at 1280x1024x85, but it's an old CRT that, for some reason, works fine at 1280x960 but gets unfocused at 1280x1024. I'm following the step "adding undetected resolutions", and here's the result:
Code:
fallingwater@longcat:~$ xrandr
Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 2048 x 2048
DVI-1 disconnected (normal left inverted right x axis y axis)
[code].....
Background: I am running Debian 8 with the Xfce DE on my Toshiba Satellite Laptop.
When at home I will connect my laptop to an external display. I did the same while I was running Ubuntu; however, with Ubuntu I could activate my laptop display by simply disconnecting the external monitor. With Debian + Xfce, unplugging the external monitor leaves my laptop screen blank.
In order to activate my laptop display, I have to open Display settings, turn on laptop display -- which still leaves my laptop screen blank -- and then switch resolution: there are two listings for 1366x768 under resolution, and only the second one restores my laptop display. Please note that if I have both displays on at the same time the size of the output on my external monitor will be reduced to about the size of my laptop's display.
I would like the create a Bash script which can automatically switch between my displays. After some Googling it seems like xrandr is the tool I need for the job. However, I have been having trouble getting it to work.
I tried the command Code: Select allxrandr --output LVDS1 --auto --primary --output HDMI1 --off. This however just turns my external display off without turning on my laptop's display. I suspect this has something to do with the fact that LVDS1 has two modes at 1366x768; perhaps only one of them can actually display? I'm not sure, but anyways here's the output of xrandr:
Code: Select allScreen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192
LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 193mm
  1366x768   59.99*+
  1360x768   59.80  59.96Â
  1024x768   60.00Â
  800x600    60.32  56.25Â
[Code] ....
Is there a way I can specify that xrandr should use the second 1366x768 mode?
I just realized that the second mode is, in fact, 1360x768 rather than 1366x768...
The good news is that I fixed my problem. It turns out that my backlight was not turning on, giving the appearance that my laptop screen was not displaying anything.
I have problems with xrandr in a system with Nvidia GeForce 8600GT video card. I want to use xrandr to rotate the screen on the fly.
~:$ xrandr -q
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 320 x 175, current 1600 x 1200, maximum 1600 x 1200
default connected 1600x1200+0+0 0mm x 0mm
1600x1200 50.0*
1600x1024 51.0
[Code]....
I tried enable the last option, change values for xinerama and twinview, but nothing works.
Updated old Eeepc 1005HAB to Jessie. Used to have a text file:
xrandr --output LVSD1 --mode 1024x600 --fb 1024x768 --panning 1024x768"
that I could run (twice in a row, it needed) to allow the scroling of the screen to see the bottom 1/4.
This no longer works.
I just switched from Ubuntu to Debian and I am having trouble doing something that I found easy to do with Ubuntu. I have a Radeon R9 graphics card from MSI with dual DVI ports and I'm trying to get xrandr/arandr to detect my dual monitors but it only detects one. I've installed all the drivers and even installed the "amdgpu" driver from the Ubuntu repository but still not detecting. What drivers am I missing?
View 1 Replies View RelatedAre you running Lenny? If yes, try this:
Be sure that there is an active X.
Press Ctrl+Alt+F1 to switch to tty1.
Login with your normal username and password.
Enter the command: "xrandr -d :0.0 -q"
You should be rewarded with information about your current screen.
Are you running Squeeze? If yes, try the above procedure and please explain to me what this means: No protocol specified
Can't open display :0.0
I have a dual Monitor Setup, both SXGA LCDs, one rotated left. With kernels and Xservers available from debian making settings appropriate kills X and apparently leaves modesetting and keyboard missconfigured - monitors say: no signal and it is not possible to switch to any VT until sysrq-unraw (alt-print-r) is pressed, which makes the system responding to keyboard, but still leaves the screens blank. Restarting the display manager sets a working mode with both screens showing the same.
View 1 Replies View RelatedI have been running linux on my thinkpad r50 for about a year, specifically 9.04. The problem is with this new 10.04 lts installation when I go to hook up an external monitor via the avg port and run xrandr to initialize the display, the laptop monitor panel becomes a garbled image and the television that is attached to the computer says no input. As of now I am stumped and open for assistance on this one.
View 1 Replies View RelatedI'm trying to hook up my TV to my MacBook1,1 laptop running the Lucid Lynx Beta. The TV is connected to the laptop via a mini-DVI to DVI-I adaptor, which is connected to a DVI-I to video adaptor, and this is connected to the TV via a component cable.
Under OS X, after plugging in the mini-DVI cable, the TV automatically becomes a secondary display for the laptop (extending the current screen), so from a hardware perspective everything seems ok. Under Ubuntu, plugging in the mini-DVI cable elicits no response from XRandR whatsoever (xrandr -q reports DVI1 disconnected both before and after). URandR and the regular "Detect Displays" button in the "Monitors" preference app do nothing. The laptop has an Intel GMA 950 chipset, and the Intel driver is running successfully (Compiz works fine). I have a clean xorg.conf (generated by X -configure), except for the addition of "Virtual 2048 2048" in one of the SubSections of the Screen section. I'd be happy to post the full xorg.conf if it would be useful.
So far I have tried xorg.conf tweaks, and I have followed instructions to manually tell xrandr to output to DVI1 as described in the comment by Marko Mikulicic here.
I have been arguing with my acer aspire one laptop since I bought it in terms of the screen resolution and have never been able to solve the problem, although I seem to be getting close. I just updated to 10.04 (the netbook remix).I have been following the instructions for how to fix it here. The result was this:
Code:
liz@Pippin:~$ cvt 1366 768
# 1368x768 59.88 Hz (CVT) hsync: 47.79 kHz; pclk: 85.25 MHz
[code]....
how Xrandr supports Dual screens. I am attempting to setup Dual Screens on a Ubuntu 10.10 System with an ATI twin head card (DVI + HDMI) Non-mirrored, separate desktops However on connecting a device to the HDMI output - the DVI screen output appears to loose all panels, icons. Only the mouse pointer & desktop background remains.
I believe the output is defaulting from screen 0 to screen 1. I found a solution by creating two devices in xorg.conf and assigning one for each separate screen. BUT this created a new problem of loosing my mouse pointer. how I can get my mouse pointer working or the correct way to setup dual screens.
[URL]
I am setting up a display system that will not have a keyboard/mouse and automatically boots into gnome and starts up firefox to a display page. The page is optimized to a 720p resolution which I can set when we use a TV for the display, but is not an option if we use a monitor. I am trying to find a way to set the resolution to 720p automatically on boot up. I am always using 16x9 displays with a DVI connection (to HDMI on TVs)
I was able to get one monitor working by creating a script and setting it to load in the Startup Applications as shown:
Code:
#!/bin/bash
scnres="1280 720 60"
modeline=$(cvt -v $scnres | grep Modeline)
modeline=${modeline#Modeline }
[Code]....
I've just completed my first pc build, and installed Ubuntu 8.2. My build was focussed around a legacy Apple Cinema 30" display, which has 2560x1600 @ 60fps resolution. The motherboard - Gigabyte H97N-Wifi - supports that display, although the display drivers are supplied by Intel, and are therefore nonfree. On startup, my display resolution defaults to 1200x800. This is what /var/log/Xorg.0.log says about it:
Code: Select all[snip]
[ Â Â Â Â 1.830] (II) intel(0): Output VGA1 has no monitor section
[ Â Â Â Â 1.881] (II) intel(0): Output HDMI1 has no monitor section
[ Â Â Â Â 1.882] (II) intel(0): Output HDMI2 has no monitor section
[ Â Â Â Â 1.882] (II) intel(0): Output HDMI3 has no monitor section
[ Â Â Â Â 1.933] (II) intel(0): EDID for output VGA1
[ Â Â Â Â 1.986] (II) intel(0): EDID for output HDMI1
[ Â Â Â Â 1.986] (II) intel(0): Manufacturer: APP Â Model: 9232 Â Serial#: 33555281
[code]...
I bumped into a webpage which stated that xrandr does not work with proprietary drivers, and if that's true, I can't get it to change resolution on my screen.
I have a notebook Asus X-serie with a
Code: Select all# lspci
00:00.0 Host bridge: Intel Corporation ValleyView SSA-CUnit (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation ValleyView Gen7 (rev 0
00:13.0 SATA controller: Intel Corporation ValleyView 6-Port SATA AHCI Contller (rev 0c)
00:14.0 USB controller: Intel Corporation ValleyView USB xHCI Host Controll (rev 0c)
[CODE]..
However I would like to display the same too onto my CRT. My crt of my pc notebook is blank. Nothing. I read a lot and nothing. I read on xrandr but few info:
Adding new modes
Under some circumstances, some modes might be missing. For instance, if the monitor does not report correct EDID information. Or if the output didn’t have a CRTC available at startup because another output was using it and you disabled it in the meantime.
If a mode exist, you may add it to one output with:
$ xrandr --addmode VGA1 800x600
If the mode does not exist, you may first create it by passing a modeline:
$ xrandr --newmode <ModeLine>
I installed debian 4.0 (etch) on an old computer with some pickled graphics card in it, and then I upgraded the computer to one with slightly newer hardware only without the graphics card (the new one used on board graphics). I moved the hard drive from the old one to the new one but when I booted it up it failed to start the X-server and I got some errors listed for "device not found" and "no screens found".
I tried using "dpkg-reconfigure xserver-xorg" however I can't seem to find a working configuration. It seems pretty silly that when installing debian it can detect all this automatically with no problems but when it comes to changing some hardware around you are left in the dark with a complicated re-configuration process. Is there not some way to automate this? I'd rather not have to re-install everything
DE: lxde
version: Jessie
using xorg file: no
After changing my video cards from gigabyte HD5450 and saphire X550 to two saphire r7 240s one of my debian installs no longer supports rotating the monitors either with 'Monitor Settings' or xrandr. The only difference between these 2 Jessie installs is that one was upgraded and the other one was fresh. The problem is with the upgraded one. On the fresh installed debian I just put the ati proprietary driver so I won't do further testing on it but xrandr was working fine on it before that.
I tried going over the ATIHowTo [URL] .... and everything looks good. Tried purging the non free firmware and reinstalling. I verified the version numbers of libxrandr2 and kernel of both installs. It is either some scrap left over from wheezy or a configuration file I am not aware of.
So what actually happens is xrandr does not say anything, blanks out all windows on the screen with only their background color and title bar showing, changes the lxpanel to its background pattern except for 2 blanked out boxes almost to the right of the screen( I have 10 tray icons there before it blanks), activates the screen I wanted to rotate with the proper rotation. On my main screen I can't click on anything. On the rotated screen I can right click and I get my openbox right click menu like I do on my main monitor before the command but when I try to run something nothing happens. The only way I can get out of this situation is to go to ctrl-alt-f1, log in as root and type 'service lightdm restart'.
Both of these monitors are connected to the primary video card, an ati r7 240 saphire. The main one is on vga and the other one is on DVI. I also have another monitor connected to HDMI but it's not being used. I have yet another monitor connected to the VGA of the secondary GPU I don't think it's a problem is it? I tried not using 'xrandr --setprovideroutputsource 1 0' and it still did the same thing.
I tried just launching openbox with no LXDE and it did the same thing.
Also another strange thing is when I stop the lightdm service and try to 'startx' or 'xinit' my screens go blank; numlock, control-alt-delete and control-alt-f1 do nothing and the only thing I can do is an emergency REISUB. I didn't configure this install to use startx or xinit yet but should it really lock up my system?
On the affected system my script looks like this (I already did this step by step and the 'rotate left' line is causing the problem):
Code: Select allxrandr --setprovideroutputsource 1 0
xrandr --output VGA-0 --primary --mode 1680x1050 --pos 0x0 --rotate normal
 --output DVI-0 --mode 1680x1050 --pos 0x1050 --rotate left
 --output HDMI-0 --off
 --output VGA-1-1 --off
lxpanelctl restart
Additional info:
Code: Select all$ inxi -G
Graphics:Â Card-1: Advanced Micro Devices [AMD/ATI] Oland PRO [Radeon R7 240]
      Card-2: Advanced Micro Devices [AMD/ATI] Oland PRO [Radeon R7 240]
      Display Server: X.Org 1.16.4 drivers: ati,radeon (unloaded: fbdev,vesa)
      Resolution: 1680x1050@59.88hz, 1680x1050@59.95hz
      GLX Renderer: Gallium 0.4 on AMD OLAND GLX Version: 3.0 Mesa 10.3.2
[Code] .....
GNOME decided not to use the correct resolution ever. In Ubuntu, it got it automatically and that said it should be 1366x768, and when i run this:
Code:
xrandr -s 1366x768
I get
Code:
Size 1366x768 not found in available modes
So then I tried to run xrandr and find out what was available and I got:
Code:
$ xrandr
Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1024 x 768
default connected
[code]....
So when I try to change it to 1024x768, I get the same "not found in available modes" message.
I tried to install NVIDIA drivers to my asus computer . When I rebooted startx did not launch.
These are the commands and source i used to install nvidia driver
Code: Select alldeb http://http.debian.net/debian/ jessie main contrib non-free
apt-get update
apt-get install nvidia-glx nvidia-kernel-dkms nvidia-xconfig nvidia-settings
nvidia-xconfig
shutdown -r now
Here is my log
Here is my lspci | grep -i vga
Here is my xorg.conf file
I tried to burn a cd today and k3b told me it couldn't find an optical device. It suggested making sure HAL was running, it is. Nothing has changed except auto upgrades, so I tried an apt-get upgrade to see if that would make a difference. It didn't. Burning has never been an issue before, and googling all day hasn't provided any answers, apart from finding /etc/init.d/hal The permissions haven't been changed.
james@Lenny:~$ ls -l /media
total 8
drwxr-x--- 2 root root 4096 Feb 12 00:14 apt
lrwxrwxrwx 1 root root 6 Jan 21 2009 cdrom -> cdrom0
drwxr-xr-x 2 root root 4096 Jan 21 2009 cdrom0
K3B says it can't find a drive even though hal is installed
ihal - Hardware Abstraction Layer
i hal-info - Hardware Abstraction Layer - fdi files
i libhal-storage1 - Hardware Abstraction Layer - shared library for s
[code].....
I have did a clean installation of Debian Jessie today on my laptop and my computer.I use the Gnome 3.14.1 Desktop environment.
I installed Spotify-Client via PPA, and i installed the gconf-editor, gufw and Google Earth. Those 3 applications are not visable in the Gnome applications menu.
If i run then via the terminal, e.g. spotify-client, gconf-editor, gufw and google-earth, the applications are started. They seem to be installed correctly. I tried either running apt-get purge spotify-client gconf-editor google-earth-stable gufw, and reinstalled those applications, to no avail.
I even tried installing another desktop environment, mate-desktop. The shortcuts to the applications do exist in /usr/share/applications. Only not in the Gnome 3 menu. It's strange, because this problem happens both on my desktop and my laptop computer.
I run:
Debian Jessie 8.2.0 with Gnome 3.14.1.
Kernel 3.16.0-4
amd64 architecture
I also tried reinstalling Gnome-Shell and GDM. But it doesn't work.
Before, Debian Wheezy 7.9 was installed, and there was no problem. My Debian installation is fully up-to-date.
Every time I open my terminal a warning message shows up. The warning is the following:
Code: Select allwarning: output DFP2 not found; ignoring
There is no output DFP2 in my system. I ran xrarndr and the outputs are the following:
Code: Select allScreen 0: minimum 320 x 200, current 3840 x 1080, maximum 8192 x 8192
VGA1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm
  1920x1080   60.00*+
  1680x1050   59.95Â
  1600x900   59.98Â
  1280x1024   75.02  60.02Â
[Code] ...... Â
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 connected primary 1920x1080+1920+0 (normal left inverted right x axis y axis) 477mm x 268mm
  1920x1080   60.00*+ 50.00  59.94Â
  1680x1050   59.88Â
  1600x900   59.98Â
  1280x1024   75.02  60.02Â
[Code] ....
HDMI3 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
DP3 disconnected (normal left inverted right x axis y axis)
I recently did a reinstall on my system and I am now running Squeeze. I am currently trying to get some software running, but I believe I am having issues with the graphics requirements. The software needs an X server with 8 bit / PseudoColor mode. It is recommended to work in "8,24"-overlay mode. This was set up on my old install on this computer, so I know it is not a problem with my graphics card. But in the installation guide it says to enable this function it is necessary to add some information in the file /etc/X11/XF86Config-4. The problem is I don't have this file. I had this file in my old install, but on the fresh install it is not there. I have the /etc/X11/ directory, and it contains: directories: app-defaults, applnk, cursors, fonts, twm, xinit, xkb, Xreset.d, Xresources, Xsession.d
and
files: default-display-manager, rgb.txt, X, Xreset, Xsession, Xsession.options, XvMCConfig, Xwrapper.config
I think I've looked through everything in the /etc/X11/ directory but I don't see anything that looks like the XF86Config-4 file. Is there possibly a package that I am missing or something I need to run to create this file? I know on my old install this file was created or modified by running 'xf86config' in the command line. I've tried that, but it tells me 'command not found'.
Installed Debian 7.8 KDE next to Windows 8.1.
Installed perfect perfect (except for network part). Grub came up, I selected Linux. After start up I typed
Code: Select allstartx
And I get the
Code: Select allFatal server error: no screens found
Also when I run
Code: Select allsudo iwconfig all I get is
Code: Select alllo    no wireless extensions
eth0Â Â Â Â Â Â no wireless extensions
Running lspci I get (vga for startx problem and network for WiFi problem)
Code: Select allVGA compatible controller: Intel Corporation ValleyView SSA-CUnit (rev 0e)
Code: Select allNetwork controller: Atheros Comm. AR9485 Wireless network adapter (rev 01)
Boot up with 2.6.32 kernel. Get to login screen, X attempts to start and fails. I log in, execute startx and succeed. Yesterday, could not boot up at all with .30 kernel. Upgraded to .32, so partially fixed. Yesterday also un-installed Synaptics package, as do not have touch-pad on this machine (Thinkpad X40)
This from kdm.log:
X.Org X Server 1.7.4
Release Date: 2010-01-08
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-trunk-686 i686 Debian .....
I have been trying to get this web cam working for a long time. lsusb:
Code:
Bus 004 Device 003: ID 06a2:0003 Topro Technology, Inc.
dmesg
Code:
[ 1990.570050] usb 4-1: new full speed USB device using uhci_hcd and address 3
[ 1990.751460] usb 4-1: configuration #1 chosen from 1 choice
Kernel patch: [URL]
Driver project: [URL]
Cheese simply says no camera found. Skryba says no devices found. Since this kernel patch was 2009-04-07 which is nearly a year ago it should be in latest kernel?
[Code]...
I'm brand new to debian and quite new to unix based systems in general.
I just switched to debian from ubuntu in search of something different and I want to find a system that works for me before I settle down.
I DO NOT HAVE A SECONDARY OS
just two problems I have with debian:
No sound
Error message: No volume control GStreamer plugins and/or devices found.
When I try to open sound from the speaker icon at top right.
I think it's a driver issue but Its not as easy as ubuntu was lspci:
My trackpad also does not work so I have to open documents manually if I don't bring my mouse to class.
how do you enter into different modes of vmstat e.g-disk mode,disk partition mode and slab mode.going through man pages i figured out using "vmstat -p <partition> is for 'disk partition mode'.there is no info regarding diskmode and slab mode
View 1 Replies View RelatedSimple question (I hope). What does the dot at the end mean?drwxrwxr-x
View 3 Replies View Related