I created a large partition using parted (~6TB) and XFS. Everything seemed to be fine until I rebooted the system and now I seemed to have lost that partition. The details are:
Code:
media@media:~$ uname -a
Linux media 2.6.35-24-generic #42-Ubuntu SMP Thu Dec 2 02:41:37 UTC 2010 x86_64 GNU/Linux
[code]....
I have a minor problem with gvim. My gvim never maximizes. Whenever I try to maxmize it automatically shrinks from right side and bottom. Don't know if anyone else faces this problem, but I have faced this even after re-installing the system It is not a show stopper but surely an irritant.
I am using openSUSE 11.2, KDE 4.3.5.
admit I don't know everything and right now I am at my wit's end trying to figure out this one.The system is: F13 x86_64; GNOME (compiz turned off); wine-1.1.38-1.fc13.i686 and nvidia er from RPM Fusion xorg-x11-drv-nvidia-195.36.24-1.fc13.x86_64The problem is: When I run a fullscreen app in Wine, switch virtual desktops and switch back, the fullscreen app has shrunk. This did not occur on F12 prior to upgrading to F13.The app itself seems to have not noticed it was resized; on checking its configuration panel it seems to still think it's running full screen.What I want to know is whether the problem is in Wine, the video driver, or the window manager, or somewhere else, so that I can report it to the right people (or just fix it).
View 2 Replies View RelatedI've been using Excel from OpenOffice with moderate success for the last year. Now I've just tried to open a new spreadsheet and I'm suddenly getting a highly condensed view. The cells are about 1mm X 4mm. If I expand them by selecting and dragging, then try to copy data from another spreadsheet onto the new one, the data shrinks to the small scale -- unreadable.
View 4 Replies View Relatedsda6 is 10.04 sda 7 was dreamlinux. Deleted DL and on reboot received error 15. Tried super grub but all Linux options fail. Can only get to win 7 I do not have to re-install. I have data galore on 10.04 and not backed up.
View 3 Replies View RelatedUsing slack 13.0 32-bit I have a dual-boot configuration with slack at sda1, sda2, sda3 and ubuntu 10.04 on sda6, sda7, sda8 When I boot into ubuntu, then boot back into slack, the date setting is change to '00.. something' (zero hours).
View 4 Replies View RelatedI make partition on fedora-12, after that it gives me warning
kernel was unable to re-read the partition table on /dev/sda (Device or resource busy). This means Linux won't know anything about the modifications you made until you reboot.
Is it possible to reload partition without reboot, i tried partprobe as well but no luck.
I installed Fedora 13 to sdb7 and installed Grub to root all went well on install. But when I reboot it stops at Loading Partition.
View 12 Replies View Relatedwhat now trying to mount partition get this error this is the partition ubuntu 9.10 is installed on and upon reboot error no device with a long string. mount: can't find /dev/sda6/mnt in /etc/fstab or /etc/mtab
so now that I believe I've successfully mounted the partition how do I direct the bootloader to this partition /dev/sda6 on /media/11076e45-e27d-470b-bb6d-6894f7809a0c type ext4 (rw,nosuid,nodev,uhelper=devkit)
I'm working with Linux 2.6.23 on an embedded device and am receiving the following error executing the reboot command.
View 2 Replies View RelatedI am using sda1 as /, which is a bootable drive. I do not know if my problem is that I did not create a /boot drive. After removing the iso dvd, I tried to reboot and I get this back: -bash: /sbin/reboot: input/output error Then it returns me to the terminal prompt.
View 6 Replies View Relatedlast -a shows server rebooted, how to identify the source or cause of reboot? thx reboot system boot Wed Feb 16 08:52 (02:0 2.6.21.7-2.fc8xen
View 2 Replies View RelatedI installed Debian stable and I see these errors in the xsession error file
/etc/gdm3/Xsession: Beginning session setup...
GNOMEKEYRINGCONTROL=/tmp/keyring-j0E6Br
SSHAUTHSOCK=/tmp/keyring-j0E6Br/ssh
GNOMEKEYRINGCONTROL=/tmp/keyring-j0E6Br
[code]....
Further to this LQ thread which Tinkster solved by suggesting the last command (thanks Tinkster) I have been exploring last -x reboot and have found that the reported duration is incorrect for the last reboot and shutdown when a old wtmp file is used. Not having a record for the following shutdown, last assumes that the system has been up until the current time and similarly for the shutdown.
The output comes in time order, latest first, each line showing the time of the reboot and the uptime from then to shutdown. Using last -x reboot shutdown to show the shutdown time, here's an illustration
Code:
shutdown system down 2.6.29.6-smp Sun Mar 7 15:35 - 03:02 (11:27)
reboot system boot 2.6.29.6-smp Sun Mar 7 09:35 (05:59)
09:35 until 15:35 is 05:59.
When the uptime exceeds 24 hours it is shown as (<days>+<hours:minutes) like this
Code:
shutdown system down 2.6.29.6-smp Sun Feb 21 12:39 - 13:20 (00:40)
reboot system boot 2.6.29.6-smp Sat Feb 20 09:39 (1+02:59)
09:39 until 12:39 the next day is 1 day 02:59.
The time in parentheses at the end of the shutdown lines is normally the time until the next shutdown.
So far so good. The incorrect output is for the last reboot and shutdown of an old wtmp file. Here's the output of last /var/log/wtmp -x reboot shutdown; last -f /var/log/wtmp.1 -x reboot shutdown
Code:
[snip]
reboot system boot 2.6.29.6-smp Fri Mar 12 07:42 (01:54)
shutdown system down 2.6.29.6-smp Fri Mar 12 01:31 - 09:37 (08:05)
wtmp begins Thu Mar 11 08:25:26 2010
[snip]
reboot system boot 2.6.29.6-smp Wed Mar 10 14:12 (15+01:42)
shutdown system down 2.6.29.6-smp Wed Mar 10 12:41 - 15:54 (15+03:13)
[snip]
The boot started at "Wed Mar 10 14:12" which had an actual uptime of 1 day 11:20 is reported as 15 days 03:13 which is the time from then until the last -f /var/log/wtmp.1 -x reboot shutdown command was issued. The time from shutdown to shutdown is similarly affected.
Two days ago I repartitioned my laptop HD and added the latest Ubuntu (2.6.35-25-generic) to the existing Vista and existing Ubuntu (2.6.32-28-generic via upgrades from 9.14(?)). Prior to this install it was using Grub with menu.lst from the old/upgrade Ubuntu. After the install the boot menu labels the partition with Vista as the Windows Recovery partition and the recovery partition item is no longer present.
At first I wondered how I could get Vista to boot. I found that SuperGrub cd would boot it OK. Then, it dawned on me that the boot menu item was not the recovery partition, but instead the Vista OS partition mislabelled . Vista loads just fine from it. The recovery partition is no longer listed as it was with Grub/menu.lst. SuperGrub will not boot the recovery partition, showing an error "missing BOOTMGR".
'os-prober' produces--
root@Toshiba:/home/deh# os-prober
/dev/sda2:Windows Recovery Environment (loader):Windows:chain
/dev/sda7:Ubuntu 10.04.2 LTS (10.04):Ubuntu:linux
[code]...
I edited boot/grub/grub.cfg so the boot menu item is labelled correctly, but suspect that it will revert back when there is an upgrade.
I had a drive with a partition layout like so:
~50gig Windows 7 - NTFS
~100gig Ubuntu - EXT3
~100gig Snow Leopard - HFS+
~100gig Extended Partition
-- ~100gig Swap Disk - exFat
I wanted to delete the Snow Leopard partition and format the Swap Disk partition to something else. exFat was causing major file size bloat on small files. QT sdk bloated to like 11 gigs or something ridiculous like that. Anyways, I loaded up an Ubuntu 10.04 LTS live cd and gparted then deleted the Snow Leopard partition. Gparted said "Mission Accomplished" and tried to rescan the drive, but never found it. At this point I restarted the computer, a dell laptop, which didn't boot with an unable to find a bootable device error. The ubuntu live cd doesn't see the drive anymore. gparted scans for drives indefinitely and fdisk -l has no output.
I have around 30gb of free space in my partition table immediately before the Linux partition. I want to resize my linux partition to take up this space.
I tried booting with live cd, sucessfully umounted the hard drive but found I could not resize the partition. On clicking the 'edit size' button, partition manager recognised the free space before the partition but when i reduced this, the 'ok' button was greyed out. (it was not greyed out for the windows partition so I could, in theory, increase the windows partition to take up the free space but this is not what i wanted to do).
I am pretty sure that I had managed to unmount the drive correctly as the padlock symbol had dissapeared (I took the attached screenshot, which does show the lock symbol, after rebooting into my normal system).
Anyone got any ideas as to why it wont allow this? There is no reason why i can resize the partition to take up the free space BEFORE it is there?
I just installed ubuntu via the windows executable and I couldn't mount my NTFS partition. I found this a little odd and I checked fdisk and it seems to think I don't have an ext4 partition as my entire internal HD is displayed as NTFS.
Here's the fdisk output:
When i try to mount the NTFS partition /dev/sda2 i get the following output:
I can't make heads or tails out of this. Anyone know what's going on here?
Windows recognizes that 30GB were taken from the NTFS partition for my linux install. It reads the max partition size as 465GB. fstab reports the NTFS partition size as 488GB.
i have instaled ubuntu 11.04 wubi on my pc with windows 7. i installed and everything was going ok i navigate on ubuntu already. but the problems star here i went on my ubuntu to the partition section and i format my windows partion to be the home partion and changed the nfts to ext, i did the upgrades but i forgot that theyr running yet and i restart my computer when it boot again it gaves me an error:
try (0,0) : nfts5 : wubildr
try (0,1) : ext2 :
and the windows7 says that i have to instal again. so i went to another pc and i made a cd boot and a pen boot. i burned the iso (downloaded from the ubuntu oficial site the 11.04 32 bit version) image to the cd and pen drive prperly, i adjust my boot options to star from usb or cd rom and nothing im struck.
Trying to install Ubuntu (any atm) on my father's HP destop. When i install, the partition manager wont allow me to shrink the windows partition to fit ubuntu in, and when i go to gparted to do it manually, it says that there are damaged sectors. is there a way to force ubuntu to install?
View 2 Replies View RelatedThis is my partition table:
/dev/sda1 1 4255 34178256 83 Linux
/dev/sda2 4256 4437 1461915 5 Extended
/dev/sda3 * 4438 9964 44395627+ 7 HPFS/NTFS
[code]....
using onboard windows disk management i have made 75gb unallocated to add to the aforementioned ntfs data partition. but, after resizing extended partition, will i need to fix grub even though i will be adding the unallocated space to a storage partition and not the ubuntu boot partition?
View 4 Replies View RelatedI was wondering what the best way is to partition multiple distros to share one home partition.
View 8 Replies View RelatedI have an Acer Aspire Netbook running a dual boot with Xp and Ubuntu Netbook Version (Lucid Lynx if I am not mistaken?) Anyway I plan on selling this netbook and I need to remove the Ubuntu Partition and go back to just a full Windows Xp partition with it's recovery partition also.
View 2 Replies View RelatedI tried installing Ubuntu 10.04 LTS on my girlfriend's lenovo using a live disc. First we tried it out to show her the wireless would work fine (her previous lenovo was not ubuntu friendly at all). She's interested in keeping her windows 7 partition along with the lenovo recovery partition, so I tried doing a dual boot install. I manually moved the cursors setting the disk space on each partition, and we allowed Ubuntu to do the rest. Much to my dismay, the installation failed.
I've done some reading over the internet, and I think in our case it would be best to use a Wubi installation. We're interested in using 10.04, so where can we find a wubi installer of Ubuntu 10.04?
Also, any ideas why the installation might have failed? The iso was downloaded off the ubuntu main site, and we burned it using infrarecorder.
Currently, my partitions are set up as such:
83GB ext3 free space
~10GB ntfs HP/Vista Recovery Partition
~93GB Ubuntu (Hardy Heron)
I tried to just have two partitions (recovery and ubuntu), but because of the different file systems, and the placement of the hp recovery partition, it has to be right in the middle. This is basically what I want to do:
1) Reinstall Hardy Heron on a new (smaller) partition from the free space partition.
2) Once it's working properly, format the rest of the hard drive (getting rid of the recovery partition) and create a single ext3 partition.
3) Install another distro on this new partition.
Does anyone foresee any complications with all this slicing and dicing of my hard drive for which I should/could prepare?
So I tried adding a new, 2nd hard drive to my Ubuntu 9.04 desktop for some additional storage and only managed to kill my system so that it won't boot up anymore (I just get a blinking cursor after the BIOS does its thing).I could sure use a little help getting back to a functioning system, and then adding the second drive. I tried following the instructions from this link to add the 2nd drive:
(So the forum rules won't let me post the link, neato. Here it is with spaces added):
h t t p s : / / h e l p . u b u n t u . c o m / c o m m u n i t y / I n s t a l l i n g A N e w H a r d D r i v e
[code]....
I want to change my sda2 partition to ntfs type. i have installed GParted but it is returning a strange type of error. Here is the error dump file...
[Code]...
WARNING: the kernel failed to re-read the partition table on /dev/sda (Device or resource busy). As a result, it may not reflect all of your changes until after reboot. WARNING: the kernel failed to re-read the partition table on /dev/sda (Device or resource busy). As a result, it may not reflect all of your changes until after reboot.
Is there a program that will reread the partition table and update the kernel even if one of the unmodified partitions is mounted? I installed my system on one partition, then I added another with free space. Now I want to format the second partition, but the kernel doesn't know about it yet. I tried sfdisk -R /dev/sda, but it refuses while the root partition is mounted. Is there anyway I can avoid rebooting?
View 2 Replies View RelatedI have finally been convinced to partition my 500GB hard drive from a two partition setup with root and swap to a three partition setup with root, swap, and home. I found a nice tutorial about how to do this, but here is my question:
A) How much space do I leave for the root partition and the home partition?