I've just installed 10.04 in dual boot with xp, completed all updates and tried to suspend. My swap partition is the right size and I don't recall doing anything wrong yet when I wake up the computer after suspending it, the monitor doesn't reactivate and I've had to force it to shut down. And also, now it tells me "networking disabled".
View 2 RepliesI've read hundreds of threads on this problem but they seem to be intermittent and the resolution has been using a different kernel version.
I'm using the latest kernel but I still have this problem
Running Logical Volume Manager gui and attempting to extend the volume results in the same error.
We have ubuntu server and bind9 installed and setup.When I issue rndc reload or /etc/init.d/bind9 reload I got this:rndc: connection to remote host closedThis may indicate that* the remote server is using an older version of the command protocol,* this host is not authorized to connect,* the clocks are not syncronized, or* the key is invalid.If I issue named-checkconf /etc/bind/named.conf I got this:/etc/bind/named.conf.local:165: unknown key 'rndc-key'I got the key files in the right location but I'm not sure if we even need to use them.
View 2 Replies View RelatedIf I suspend this toshiba satellite, and the battery is or gets low it will wake from suspend to tell me that it will need to suspend due to a critical low battery. Which is pretty dumb. I've experimented with this by plugging and unplugging the ac adapter.
View 1 Replies View Related3 questions i have about "pm-suspend-hybrid"
1. is it possible to schedule this command in the same manner as shutdown ? eg sudo shutdown -h 60
2. is it possible to schedule the laptop to come out of suspend ?
3. i have a usb sound card (xfi go). when waking from suspend, the internal sound card is selected. i have to manually select the external sound card & for whatever reason, also unmute it too
I had finally go tmy netbook set up the way i wanted it, everything was working great. The notification popups were annoying me so i was trying to disable them. I used this string in a terminal: sudo mv /usr/ share /dbus-1/services/org.freedesktop.Notifications.service /usr/share/dbus1/services/org.freedesktop.Notifications. service.disabled
After rebooting i had nothing but a taskbar.No icons, no panels, nothing but wallpaper and the taskbar. I can't even figure out how to open up a terminal.Hopefully there is a way to load synaptics and reload the desktop somehow?
Try reloading my synaptic Package manager and I get the following message after a while:-
An error occured
the following details are provided
W: Failed to fetch http://ke.archive.ubuntu.com/ubuntu/...ic/Release.gpg Could not resolve 'ke.archive.ubuntu.com'
W: Failed to fetch http://ke.archive.ubuntu.com/ubuntu/...tion-en_US.bz2 Could not resolve 'ke.archive.ubuntu.com'
W: Failed to fetch http://ke.archive.ubuntu.com/ubuntu/...tion-en_US.bz2 Could not resolve 'ke.archive.ubuntu.com'
[Code]...
I want to reload windows xp + Ubuntu from scratch, I have no experience with dual-boot installation soNow we start with a blank 250GB harddrive in my Samsung N310 netbook, and then,Plan 1: partition the whole 250GB harddrive into 2 logical disk, namely drive c: and d:, both of them are NTFS, and then format them ==> install windows xp to Drive C: ==> boot from USB drive and run Ubuntu USB installer, and let the installer do its partition for Linux's EXT3Plan2:partition the whole 250GB harddrive into 3 logical disk, namely drive c:, d: and e:, with drive c: and d: being NTFS while drive e: being EXT3 ==> install windows xp to Drive c: ==> install Ubuntu directly to drive E:
The bottom line here is that 1) there must be 2 logical drives (both are NTFS) for windows xp; 2) I want a EXT3 partition where Ubuntu resides. Can any expert kindly advise me which plan mentioned above is more viable or feasible?
I'm working on a latex document with a default installation of latex/kile. Strangely enough, upon a document change, okular does not reload and display the changes. This is contrary to all other pdf viewers that I have used. Is there anything that can be done? I noticed that in the okular settings, there is an option to "Reload document on file change." Even though it is enabled, okular does not oblige.
View 1 Replies View RelatedI have written a shell script which amongst a heap of other stuff creates virtual hosts, and consequently also reloads apache, however my problem is that unless I include a restart in the shell script, the reload is causing the server to stop, yet restarting everytime a new vhost is created is not really an option since it will disrupt the service for other users. I know this is directly to do with the SSL passphrase as simply restarting gets everything running again with no errors.
I have configured mods-available/ssl.conf so the SSLPassPhraseDialog directive uses the passphrase file instead of bulletin, hence the restart can work fine from within the shell script, but obviously reload and force-reload must be running some sort of background process which involves reloading the SSL certs or something?? so my question is can I over ride this and if so what directive / params do I use? Im on ubuntu lucid 10.04 server and apache v2.2.14.
The firefox has latest 3.6.16. But Seamonkey is only up to 2.0.11, not latest 2.0.13. I reload repository, also the same.
View 3 Replies View Relatedeog notices when a PNG file changes, and offers to reload it.But it does not reload until I move the mouse over to the monitor where I stuck eog, and click ReloadHow can I make eog just reload automatically without asking -- the way evince does, for PDFs?
View 1 Replies View RelatedI am at my wits end with trying to figure out why this machine won't dual boot any more. I had to reload XP and it broke my grub. I have tried everything I can think of to fix it. I have to use SuperGrub cd to boot. I get the grub menu and when I select the kernel it gives an error 17, can't mount selected partition. Also, my sound is broke....again. I upgraded from 9.04 to 9.10 and had to uninstall grub2 to get everything working again
View 9 Replies View Relatedit possible to refresh/reload all panel icons in Gnome? Is there a command / GUI method
View 5 Replies View RelatedI wish to re-install grub legacy from my booted USB flash drive for Ubuntu 9.04.
Using the terminal for sudo grub I then go to >root (hd0,0) and then when I go to <setup (hd0) I get "Error 17: Cannot mount selected partition"
I have tried substituting /dev/sda in place of (hd0) but then I get "Error 11: Unrecognized device string"
Not sure if this is the right forum for this -- photo software. I have been using DigiKam for a while now, and now that my photo collection has 10,000 some photos, I figure I ought to start tagging them before it gets really out of hand. I am not particularly fond of the DigiKam tagging interface, so I tried to use Geeqie to tag my photos and write the tags to the XMP keywords field, thinking that Digikam would read the metadata and tag my photos accordingly. I have confirmed that Geeqie is indeed writing the tags to the metadata of the photos, but there seems to be no way to get digikam to reload the metadata for files already in its library. Is there any way to make digikam see these tags written by another application, short of re-importing all my photos?
View 1 Replies View Relatedi am using Ubuntu 10.04 LTS with compiz fusion, when the computer loads, the compiz doesn't load with the effects automatically, to make them appear i should right click on the Compiz Fusion icon and then choose relaod window manager can i make this work automatically when the computer is load?
View 2 Replies View RelatedJust got Ubuntu 9.10 and I'm liking it a lot, but my computer refuses to go into hibernate or suspend. I have a Dell M1530 but I don't really think it's a dell hardware issue because it's not just when I close the screen, it's also when I click suspend or hibernate from the menu.
View 2 Replies View RelatedI make partition on fedora-12, after that it gives me warning
kernel was unable to re-read the partition table on /dev/sda (Device or resource busy). This means Linux won't know anything about the modifications you made until you reboot.
Is it possible to reload partition without reboot, i tried partprobe as well but no luck.
When I try to reload httpd service through commandline interface directly, it works. But when I tried to reload service of named and httpd using php exec(), it doesn't works.service named reloadservice httpd reloadThe service named is OK but httpd got problem.My OS is CentOS 5.4 .
My script:
echo exec("service named reload"); result is " Reloading named: [OK] "
but
[code]....
So I've always asked this in the past when I get on a Debian system. This makes no sense to me but I just don't see how I restart network interfaces (i.e. eth0) on a standard Debian install. If I change the static I.P. address listed in /etc/network/interfaces from x.x.x.100 to x.x.x.101, I then assume I can simply do any of the following:
- /etc/init.d/networking stop | start
- ifdown eth0
- ifup eth0
- service networking stop
- service networking start
All the commands above do nothing. My only solution I know that works and implements the changes I've made is a complete system reboot which to me in Linux, is ridiculous. I've struggled with this over and over and nothing I do correctly assigns the new I.P. in the 'interfaces' file to the actual adapter. This isn't my single isolated Debian machine but every Debian machine I can get my hands on. Servers, workstations, VM's, any release, etc etc etc. Below is my interfaces configuration file:
Code:
auto lo
iface lo inet loopback
[code]...
After making an changes (add/modify/delete) to /etc/static.routes, what command should we use to reload the routing table?
View 5 Replies View RelatedI make personal site with php on wamp. When uploaded it to my debian box I make some comments in index.php like
Code:
//include(realpath('inc/inc.php'));
echo realpath('inc/inc.php');
upload the changed php file, but when try to reload the site same errors stay there. There is some cache that I have to clear but I don't know where it is. In wamp I clear wamp mp* directory What cache I have to clear? Edit: It is not my browser. I use firefox and clear everything with several times ctrl+shift+del I even delete index.php but the same errors stay at the page:
Code:
Warning: include(inc/inc.php) [function.include]: failed to open stream: No such file or directory in /var/www/site/index.php on line 3 Warning: include() [function.include]: Failed opening 'inc/inc.php' for inclusion (include_path='.:/usr/share/php:/usr/share/pear') in /var/www/site/index.php on line 3
I play two online games. One uses flash (Habbo), the other java (RuneScape). With the flash one, it loads everything up until the part where it loads the interactive elements (hovering navigators, interactive chat rooms etc), then it crashes and tells me to reload. With the java one, everything loads up until the login screen, but when I actually go to log in, it just sits there and tells me it's connecting but doesn't do anything.
I've asked the support team on Habbo for assistance, but I got a reply telling me to clear my temporary files with instructions for windows machines, even though I specified I was on Ubuntu. I did what they instructed me to (which was clearing everything from my DNS cache to my temporary files), with no amazing results. Runescape was pretty much the same. I think it's something to do with my internet... I'm not really an expert at this.
My ubuntu partition is 19GB on 80GB hard disk. Then Reformat Hard Disk to 50GB and reload partimage image file. After reload the image file, using df to check Still 19GB.
View 3 Replies View RelatedI've noticed that emacs does not notice when an open file is changed on disk (unlike ,say, geany). Is there any way of making it watch for changes of files on disk?
View 1 Replies View RelatedI was playing with a theme (Atolm-GS) and followed the install instructions which stated to back up the /usr/share/gnome-shell/theme directory, and replace it with the one from the theme. I did this, logged off, logged on, got my wallpaper for a second, then the Oh No Screen. I logged off, logged in to IceWM, replaced the theme folder with the original, logged back in to Gnome3 and same thing. Alt+F4 does not get rid of the OH No screen. My ~/.xsessions-errors file contains the following:
/etc/X11/xim: Checking whether an input method should be started. sourcing /etc/sysconfig/language to get the value of INPUT_METHOD INPUT_METHOD is not set or empty (no user selected input method). Trying to start a default input method for the locale en_US.UTF-8. There is no default input method for the current locale. Dummy input method "none" (do not use any fancy input method by default)
[Code]...
I am using GEDIT and I would like to have a shortcut key that allows me to tell GEDIT (on Ubuntu) to force reloading from file system the currently opened file.
How can I do that?
I have just install conky to my Linux Mint 9 system.I like to know if I can set up conky to auto reload a webpage.FYI, the webpage do not have rss feed therefore I cannot set conky to use rss.
View 10 Replies View RelatedWhat's the command to reload .vimrc without restarting vim?
View 2 Replies View Related