system is RedHat v4. I removed root: admin-name@domain from /etc/aliases then ran /usr/bin/newaliases.
The admin does not get the emails but now the email generated by the cronjobs is being sent to my-name@domain outlook email from "root@localhost.localddomain". No other changes were made. Where should I start looking for the definition of sent crontab email to my-name@domain?
I'm attempting to send email with a PHP application I got from a textbook. Do I need to start an email server in order to get the application to work?Using SuSE 11.2
View 5 Replies View Relatedhow to stop Evolution adding the sender's email address, that is the one who sent it to me, in the body of the email when I forward it? I have been through the settings and help and am so far unable to find any action I can take.
View 6 Replies View Relatedis there a way to allow unsubscribed email address to send emails to mailman list without having to manually set a filter for that email address?
View 1 Replies View RelatedIs there a way of allowing only certain domain to send e-mails to certain specific e-mail address. I am using Sendmail, and I have an alias which translate to certain members of staff within my organization. I don't expect e-mails from outside our domain to be sent to this alias e-mail address.
View 1 Replies View RelatedCan anyone tell me how i change the default domain name for cron?everything i cron runs it emails from and to user@com.com
this leaves me with a massive list of failed mails in postfix.i have mailto on my main crontab but i cant do it on all of them.
I have a user who was getting constantly spammed so I deleted their email account but it's still coming in and trying to get delivered, how do drop all email for a specific email address?
View 4 Replies View RelatedHow to configure my home linux server, as an email server, and be able to send email to hotmail, please?. I have done this before, but I never managed to do it so hotmail accept emails coming from my linux server.
View 5 Replies View RelatedSo I have Postfix working great and I've always used webmail if I needed to send email from PC's outside of $mynetworks. So fast forward to today where I got my 1st Android powered mobile phone and I can configure the Android mail client to send/receive IMAP email but my question is do I need to become an open relay to allow my random wireless providers dynamic range of IP's to send mail via Postfix? Seems extremely vulnerable and scary to think I would have to allow my providers IP range to relay mail via my MTA. I started reading a bit and I think I need SASL authentication and since both Postfix 2.8.1 & Dovecot 2.0.11 are both configured / using TLS, is there anything else I would need or you recommend for sending email from my Android powered mobile?
View 2 Replies View RelatedI have postfix sort of working correctly. postfix can send email to the internet but it doesn't want to send email to my local exchange server. What I need is for postfix to send emails directed to @xyz.com to my exchange server instead of itself.
My setup
mail.xyz.com - exchange 2003 server
www.xyz.com - centos 5.3 server with postfix
www.xyz.com can send emails to my hotmail.com account so that part works correctly. www.xyz.com can't send email to username@xyz.com. postfix seems to be delivering the email to itself and not the exchange server.
How can I tell postfix to send the @xyz.com emails to my exchange server?
Here is a sample of my /var/log/maillog
Jul 22 15:43:43 list postfix/smtpd[9802]: D63168604A3: client=localhost.localdomain[127.0.0.1]
Jul 22 15:43:53 list postfix/cleanup[9805]: D63168604A3: message-id=<20090722204343.D63168604A3@www.xyz.com>
[Code].....
I've started to get emails that would typically come from [URL] as [URL]. These emails come from services that send out emails (backup programs) directly, or from cronjobs. I've logged in as the non-root account and either sudo su - or su - to root and the restart the service at one point or another. If I login directly as root and bounce the service or cron the emails come across as from root. I don't see anything in my environment variables after I su to indicate what would cause this. I'm not sure where else to look? A pam setting? This seems to have happened between Fedora 10 and 14 (did a bunch of overdue upgrades recently) I've only got Fedora so I don't have anything to compare to. In Fedora 10 I did not have this problem.
View 2 Replies View Relatedi am using centos 5.4, running squid for proxy, i want to block email sending and receiving of proxy users to secure my data. how is it possible that the proxy user can only brows websites but he can not receive or open and send or save as draft to mail box.
View 1 Replies View RelatedOur mailing systems was working in web mail and we had a tool wherein if we apply leave mails where sent to web mail. Now we have moved to exchange server and we want the mails to be sent to exchange server. The Leave Management systems is developed in PHP with Mysql the platform used is linux.
View 5 Replies View RelatedI am working happily with Fedora 8, evolution chatting happily to exchange 2003, calendar sync the works...impressed. This continued through Fedora 9 (though a little bumpy as all odd numbered Fedora releases are). On to Fedora 10, yes works a treat out of the box (DVD). A couple of updates to evolution later, through yumex (fedora updates), and evolution has stopped sending email to the exchange server. It's also touch and go whether I can read email using OWA.
On pressing 'Send/Receive' evolution pops the error,
Error while performing operation.
Exchange transport can only be used with Exchange mail source.
How could I back out these evolution updates?
Does anyone have some quick tips on how to send an Ubuntu server's email to a gmail account via postfix/procmail?
View 5 Replies View RelatedAll the emails I send from my linux server end up in the recipient's spam folder....Although I have tried many howtos etc and checked all blacklists... It doesn't work...
View 3 Replies View RelatedCurrently my OS is Ubuntu 9.04 Jaunty Jackalope Desktop OS and my web server is Apache2. I have a public address 60.x.y.z and my pc local address is 10.x.y.z. I have a web app in my Apache2 which currently run in localhost(10.x.y.z).
I would like to enable the web app so that it could be browse from outside. I know there maybe some port forwarding process and some commands involved in order to do that. But I have no idea on the steps to do that.
Did anyone heard about or can suggest mabe a postfix serverside solution in order to insert a counter number into the subject line before the message is sent?
I mean something similar with helpdesk tickets, because I would like to create the possibility for the senders, to make further refference about a speciffic message using it's counter number provided by postfix server.
I'm attempting to send email used a textbook PHP application. The application fails to send an email.Do I need to setup an email server to get the ap to work?Right now, I'm getting email through Kontact via my web host, Yahoo mail and Google mail.
View 2 Replies View RelatedMy ISP blocks outgoing email if it does not login properly with a valid account. I successfully configured sendmail to use SMART_HOST and confAUTH_OPTIONS with confAUTH_MECHANISM set to LOGIN PLAIN.
It successfully sends email because I tested it with evolution sending through 127.0.0.1, but I need to specify myacount@mydomain.com as the email address for root.
But it doesn't work for logwatch because it sends as from root@localhost.localdomain, and my ISP's smtp server rejects it. The message I get back in root@localhost account is the following:
----- Transcript of session follows -----
... while talking to smtp.mydomain.com.:
>>> MAIL From:<root@localhost.localdomain> SIZE=581 AUTH=<>
<<< 550 5.7.1 Client does not have permissions to send as this sender
554 5.0.0 Service unavailable
I thought that I should masquerade all emails from this domain, so I configured sendmail as specified in [1] section "24.3.1.4. Masquerading", but it doesn't work. It seems that masquerading in sendmail is broken or something is wrong in the documentation.
[1] [URL]
I have sendmail 8.13.8-2 and centos-release-5-4.el5.centos.1.
Is there a way to specify the "From:myacount@mydomain.com" in logwatch ? or Is there a way to make it work the masquerading in sendmail so I can masquerade everything as coming from a specific account?
a friend of mine is doing a small website-project in school (group of ~6 people). They want to use git as VCS and need acces to a server. I have an account on the server from university, but - of course - no root access.
I could create private/public keys for them, to SSH into my account, but I don't want them to have this power I found 'git-shell', which seems to be used for restricted access with git (although I'm not sure whether I understood the functionality).
My question is: Is it possible to configure SSH keys in that way, that the server runs them (and only them) in git-shell in a specified directory (using ~/.ssh/{config,authorized_keys})?
So that they can
- log in with their SSH key
- use git, execute scripts etc.
- use git push/pull from their private+school PC
- work only in a specific directory (like chroot) eg. ~/web-project/
[Code]...
I've searched high and low for an answer. This seems so simple...
Domain = chadmccan.com
Server 1 = admin.mo.chadmccan.com
Server 2 = leroy.mo.chadmccan.com
Email for my domain is handled by Google Apps. MX records point there, I receive a ton of email there.I have 2 systems. admin.mo.chadmccan.com, which is designed to be the "gateway" for all services, including email.On the same network, is leroy.mo.chadmccan.com. It's just an application server, for random apps, including a webserver.I just want all of my systems to email anything that goes to "root" to blahblah@chadmccan.com relaying via admin.mo.chadmccan.com. Is this impossible?
One of our client having issue with the qmail. The issue is if any one send email to abc@ourdomain.com (abc@ourdomain.com the email address which is not exist) it should send failure notification i.e."email does not exist" to the sender. The qmail server is not notifying that email address does not exist.
View 1 Replies View RelatedMy calling application will accept only strings and interger. we are replacing RSA bsafe library to openssl. using RSA bsafe, we have generated the private and public key in BER format. Then convert the keys, BER format into ASCII format to send the calling function. (these everything done by using RSA supplied bsafe library) same way i have to right using openssl..i m now able convert the RSA public and private key into DER format
rsa = RSA_generate_key(1024, 3, NULL, NULL);
{
size_t size;
[code]....
Is there a way to control all email address in one server manage all email application software either win OS / MAC OS or Linux Distro. I have experience about email when the pc crashed i dont have any backup for their email data also email address.
View 2 Replies View RelatedI have a Dropbox account and trying to sign-up to Ubuntu One. The Ubuntu One sign-up does not like my email address for some reason(?). It is that my email address is already in use on the server?
View 1 Replies View RelatedI've come across a strange issue where any email address that I email with mail returns an error "Bad Address"
Fairly new Centos 5.4 Install, sendmail is the MTA.
Linux 2.6.18-164.el5 #1 SMP Thu Sep 3 03:28:30 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
DNS is working fine so there isn't a problem.
[root@hn1 /]# host -t mx iol.co.za
iol.co.za mail is handled by 10 mg1.iol.co.za.
iol.co.za mail is handled by 10 mg2.iol.co.za.
iol.co.za mail is handled by 30 vulpix.iol.co.za.
Yet when I try to use mail it fails:
[root@hn1 /]# which mail
/bin/mail
[root@hn1 /]# ls -lrth /bin/mail
-rwxr-xr-x 1 root mail 83K Jan 7 2007 /bin/mail
[root@hn1 /]# mail -s "test" bob@mydomain.co.za
Bad address
Nothing in the maillog.
I am having many mails transferred through my Sendmail server,but I want to configure only authorised email address through our server.optimize my mail server's configuration.
View 3 Replies View RelatedI have a domain address and I keep my website in the server at my home. I use bind for DNS. I opened an email address for myself, but when I send an email to for example hotmail, gmail, it signs that as junk or spam. How can I make this address as trusted?
View 7 Replies View RelatedWe use procmail to reformat and filter email messages sent from many lead capture websites where the clients enter their reply email address manually.When we receive the message at our application we send a welcome email, and receive back the Undeliverable Email message where the clients entries are invalid, but I would like to be able to kill messages with undeliverable email addresses on our mail server before they are delivered to our application.I have found discussions on filtering masqueraded addresses, but since the IP of the sending system is not related to the entered client's email address, this does not appear to help. I would think that it should be able to query the email server to identify if the address is valid.
View 1 Replies View Related