Fedora Networking :: Virtual Router - Mix Together Two Broadband?
Aug 31, 2011I want a virtual router for Fedora? I want to mix together two broadband?
View 3 Replies
ADVERTISEMENT
Ubuntu Networking :: Loss Of Broadband Speed Using Router In UK?
Oct 10, 2010PC running Ubuntu 10.04LTS, with a Virgin media modem NTL250 with a Buffalo Airstation Turbo G wireless router running Tomato Firmware v1.27.1798.The router is is used by a Internet radio, a wii (both full time) and a nokia N86 mobile and a PSP (used occasionally). The PC is connected by a network cable to the router.Now, when the modem is plugged directly into PC i get 6 to 8 Mbs download speed. When I go modem to router to pc the speed drops down to 512 to 824Kbps. Speeds were obtained off of broadband.co.uk speed tester.
View 1 Replies View RelatedUbuntu Networking :: Building Mobile Broadband Server / Router?
Apr 27, 2011I have an old tower that I've installed Ubuntu onto. It connects fine online with a mobile broadband stick. I also have an old wireless router knocking about, and I've been trying to network up my house wirelessly using the tower as a router, if that makes any sense. Long story short, this is my setup
Internet ==> Mobile Broadband ==> Tower ==> Wireless Router ==> Wireless Devices.
I know that it's complicated, but I'm sure that it can be done. I've tried playing around with bind9, and playing with dhcp and the like. I feel that I am close.... but no cigar. how to route all traffic from the router
Networking :: Setting Up Squid Proxy To Virtual Linux Soho Router?
Mar 31, 2011i must make this work with the use of virtual pc's. I have vm player and installed fedora ( the latest version ) and one xp . So i have 2 virtual pc's. I'm making it simple for start so i can add more pc's when i see that it is working. I have setup a dhcp server at the fedora virtual pc. The fedora virtual pc is like a soho router. The xp pc is getting ip from dhcp while the fedora one has a static one.
My pc is behind an adsl router. Both virtual pc's can see each other which means i have no connectivity issues.Im trying to setup a squid proxy ( transparent one ) so for example the xp pc can access porn sites and such. I used all required configuration for the squid to work and started the service. Ive also inserted with iptables the commands to forward all incoming port 80 packets to port 3128 ( the squid ). It doesnt seems to be working and i thik i know why but i dont know how to fix it.
Because the xp has a gateway at 192.168.1.1 ( the adsl router ) packets go directly to it and not to the soho router ( fedora virtual pc as i intend to do) What can i do to solve this problem ? How can i forward all packets to go to the fedora virtual pc first and then the fedora pc to forward them (if necessary) to the adsl router? PS. I used Bridged connection on the networking configutration on the vmware player ! If you also want i can post the code for squid or iptables if needed !
Fedora Networking :: Networking - Connect To The Internet Using BSNL Broadband Connection
Mar 6, 2010I have installed fedora 12 recently. after installation i tried to connect to the internet using BSNL broadband connection. I filled in the details such as IP, Netmask, Gateway and even DNS servers. In the services also I ensured that the network manager services is on. However even though my computer cannot connect to the internet. I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual.
There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
[Code]....
I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual. There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
Fedora Networking :: Can't Connect Mobile Broadband
May 1, 2009Im able to use nm-applet just fine to setup broadband card. Its a Sprint Sierra 598u. Im running Fedora 10 KDE version. Anyone know how to get it working? i tried the setup process but all it tells me is set up GPS or CDMA so i go CDMA for mine, but then it has some default name, and no providers, as the UBUNTU version did at least...i setup best i can but then after closing configs, i go to nm-applet icon in bottom-right and it doesn't show the mobile broadband connection, also any wireless connections don't work for some reason, but DO show up. just wont connect (which i got every so often when using ubuntu on the machine, was usually a switch off or restart away from fine
View 8 Replies View RelatedFedora Networking :: Recommended Broadband Internet Provider ?
Apr 5, 2009Does anybody use successfully a broadband internet service on Fedora 10? I'm seriously thinking of buying a wireless card but don't know if it will be compatible.
View 7 Replies View RelatedFedora Networking :: Monitor Broadband Internet Traffic Only ?
Aug 23, 2009I have a 2 machine LAN with both machines having an ethernet card and a wireless card. There is a Netgear router, both eth and WiFi, allowing both machines to access the internet.
On my Linux machine I am looking for some software that allows me to keep track of my broadband usage on that machine, excluding traffic between the two machines.
There are numerous such programmes for this in XP, which use Winpcap and a GUI frontend. The "other" machine on my LAN is XP and uses just such a program.
Fedora Networking :: Mobile Broadband Drops Connection After 30s
May 8, 2010I'm having problems with my mobile connection. This has been working fine for months, but in the past few days it has connected OK, I've been able to transfer data, but after 30s the connection closes. Setup is Acer AA1 with F12 connecting via bluetooth to Nokia 3110c on O2.
So to try and figure out what's happening I put the bluetooth dongle in my desktop PC, also running F12, made a connection and again it dropped out after 30s. Then I fired up windows on the AA1 and made a connection using the same dongle, this time it held up OK. This leads me to think that something has changed recently in F12 to upset it.
Fedora Networking :: Can't Access Internet From Mobile Broadband
Oct 4, 2010I tried to preupgrade to f14 and cancel it after some time. Now, I am facing a problem that I cannot access internet from mobile broadband; but I can access net while i am connected via ethernet or wireless. I have cleared preupgrade files with
Quote: yum clean all; yum remove @preupgrade
$ uname -rs Linux 2.6.34.7-56.fc13.i686.PAE
It can detect my HUawei modem and creating an IP as well. But no Internet. Can you tell me the reason?
Fedora Networking :: 'fuzzy' Pictures On Mobile Broadband?
Nov 4, 2010This is not really a problem but I'd like to know if anything can be done about it.I run Fedora 12 (kernel 2.6.32.23-170.fc12.i686)/Gnome 2.28.2 on my Acer Aspire One netbook with a 1.6GHz Atom CPU and 1.5Gb RAM.I use a Huawei E160 mobile broadband modem to get online and this works OK; but (for example) I am on Airliners.net and looking at the trip reports, the photos are somewhat 'fuzzy'. Obviously the modem does not download too much data and you just have to do Shift+A to get it to 'reload' the pictures. After this they are crystal clear.However, is there a config setting that you could alter to do this automatically � e.g. download all the image data at once? I have looked in the Network Manager settings for my mobile broadband account and there is nothing in there.
View 2 Replies View RelatedFedora Networking :: Intermittent Mobile Broadband Connection Just Goes Off Without Doing Anything
Apr 3, 2011In the last week I have noticed that sometimes my Mobile Broadband connection just goes off without me doing anything! I have credit on the dongle account, so it isn't that. I'm using fedora 14 on an acer aspire one netbook. Dongle is a Huawei E160 on o2 here in the UK Kernel is 2.6.35.11-83.i686.fc14
Sometimes unplugging and replugging the usb dongle works. Othertimes, I have to leave it out for several hours. It does seem to happen daily, though.
Fedora Networking :: Mobile Broadband Dongle Restarts Itself?
Sep 5, 2011I few days ago I bought a mobile broadband, with dongle model Huawei e1820. I have no problem connecting to the internet. The settings in network manager are correct. But when I use the modem with high traffic for a while, like streaming, the speed gets slower and slower until finally the modem shuts down and restarts itself. After the modem restarts, it connects to the internet again, but now the speed is terrible. And if i continue using high traffic it will restart itself in a matter of minutes. But if I plug it out and don't use it for a while, the speed is back to "acceptable". For a while...
I'm using fedora 15, and have also tried it on Ubuntu Natty with the same result. Reinstalled usb_modeswitch. configured usb_modeswitch with all the guides on the web. No results.
Fedora Networking :: Mobile Broadband Fail After NetworkManager Update / What To Do?
Mar 11, 2009I have a Mobile Broadband connection (as NetworkManager calls it) that works very well until the latest update. Now it fails to connect 99.9% of the time. When it does connect it works very sluggishly.
I didn't update a second computer I have and it still works fine here. Both run F10 x86_64, both are fully updated (except for NM on this one).
Output of grep NetworkManager /var/log/messages | tail -100 from non working machine code...
Fedora Networking :: Getting Mobile Broadband Connection To Autostart Upon Boot
Jun 14, 2009I just installed Fedora 11 (excellent work by the Fedora team!) and got my Verizon mobile USB CDMA device working after some file modifications (easily found via searching).
I have to click the network icon in the task bar, and select "Auto Mobile Broadband (CDMA) Connection" to get it to connect though. It then shows up via "ifconfig" as ppp0 and all is good.
But how do I get this to auto-start when the system reboots? It doesn't show up in the network manager, and I'm not even sure how to use command-line to start up the CDMA connection! I only can do it via clicking that icon.
Fedora Networking :: Mobile Broadband Slow On (huawei E230)
Nov 22, 2009My connection is much slower on linux than windows (I'm dualbooting so its easy to test). On speedtest.net I get 0.30Mb/s at most on linux but about 2Mb/s on windows.Torrents does not seem to be affected thou. I've got speeds up to about 150kB/s on Fedora.I'm running a fresh install of Fedora 12 64 bit.
View 4 Replies View RelatedFedora Networking :: Vodafone Mobile Broadband K3805-Z Not Working?
Jan 9, 2011I need Internet on the road so brought a netbook and a USB Mobile Broadband stick. I've followed the installation instructions provided by the provider but this still does not work. I've also tried a couple of similar installation instructions found around the net. Has anybody had any luck getting this to work in Fedora 14? How did you or how can I get this to work?
View 1 Replies View RelatedFedora Networking :: Create A Broadband Connection Using Network Manager?
May 26, 2011Just replaced a working install of Ubuntu because i like GS over unity but i cant get my USB760 EVDO card to work. The usual fix of editing the cd.rules file and copying some information into modem.fdi does not seem to work on F15..
Also, noticed that when i attempt to create a broadband connection using network manager it allows me to go through all of the setup dialogs, but never actually adds the broadband connection.
Fedora Networking :: Mobile Broadband / Dialing Succeeds But No Ping To Internet
Feb 1, 2011In Fedora 14 (kernel 2.6.35.10-74.fc14.i686) I am not able to get an internet connection on my laptop via mobile broadband. However dialing succeeds and the provider starts the daily flate rate accounting.I tried the graphical network management as well as wvdial and even sakis3g (achitecture free variant from URl...).With wvdial (well configured I think) and sakis3g the dial connection is established (permanent blue light on Huawei E169). "netstat -ie" shows that the network configuration has changed (device pp0 instead of eth0 and "netstat -rn" shows that default router is set to 10.64.64.64). But "ping" does not receive data from any internet IP address and browser cannot render any website. A later check call of my prepaid balance said that the daily rate countdown was initiated (so I pay for nothing).
The GUI of the KDE network icon seems to work similar but does not set the usb key into the connected state (only blinking blue light and break-off after a few seconds).Disabling of selinux didn't change anything as well.With Mandriva 2010 I didn't have any problems with same mobile key and provider.
Ubuntu Networking :: DLink ADSL Router As Main Router And The Belkin N1 As Repeater?
Apr 13, 2010Because of the configuration of my house, I need two routers.I have a DLink ADSL router as my main router and the Belkin N1 as my repeater.I have set up the IP address in the Belkin to be 10.1.1.10 - my DLink is 10.1.1.1. I have disable the dhcp in the Belkin and set the DNS as ISP provided. [URL]..I have set the channel to 11 and in the Ubuntu Network Manger I have set the IPV4 to Link Local Only. I can see the Belkin and connect with my PC.but it will not take me through to the internet.
View 9 Replies View RelatedNetworking :: Setting Up Linux Box As IPv6 Router To Replace Netgear WNR1000 Wireless Router?
Jun 18, 2011I want to set up a Linux box as a wireless router to replace our existing Netgear WNR1000 router, as I believe the Netgear does not support the coming IPv6 protocol. Unfortunately, it is not flashable with OpenWRT or DD-WRT presently.
As we have Comcast, our cable modem acts as a dumb modem according to the customer support guy I talked to, and our router is the one that asks for the IP address from DHCP. Thus, when Comcast switches over to IPv6, I don't believe my existing router would work, correct?
My idea is to take a Linux box and put two NICs and a wireless adapter in it, using IPCop or Smoothwall to set up a router. I could then enable IPv6 support for when we have IPv6 with Comcast. Is that possible? Would there be a way to get BIND to hand out private IP addresses in the same subnet on the both the LAN NIC and the wireless card?
Fedora Networking :: O2 Mobile Broadband (Huawei E169 HSDPA) - Internet Loads At The GPRS Speeds Max Of 5kb/s
Dec 26, 2009I have a little bit of a prediciment with my Mobile Broadband dongle, even though I know I'm in a 3G area (Dongle Supports 3G connection) my internet still loads at the normal GPRS speeds max of 5kb/s. Is there anyway to change the speed of it or do I have to keep with GPRS at the moment?
View 2 Replies View RelatedFedora Networking :: Tata Indicom Photon+ For Mobile Broadband Internet Connection - Usb_modeswitch Cannot Detect Anything
Mar 26, 2010I am using tata indicom photon+ for mobile broadband internet connection.
Code:
Befor yesterday, I was able to connect via this, but today(i guess a update yesterday is the culprit) i cannot. while it should connect automatically, even usb_modeswitch cannot detect anything.
Quote:
my /etc/modeprobe.conf is also blank. But I can work with wireless
Networking :: Set Up A Laptop As A Router To Connect Wirelessly To ADSL Router?
Nov 6, 2009I have a desktop PC running Ubuntu 9.10 and Windows 7, and a Eee PC 701 laptop running EasyPeasy Ubuntu 9.04. I'd like to connect the desktop to the laptop with a wired connection (eth0), then the laptop to my ADSL router using wireless (ath0).
I have a crossover ethernet cable (I bought on ebay). I have set up my laptop with a static IP address on my LAN and it uses OpenDNS.
I have added this to /etc/sysctl.conf on the laptop:
net.ipv4.ip_forward=1
Then I tried this on the laptop:
sudo iptables --table nat --append POSTROUTING --out-interface ath0 -j MASQUERADE
sudo iptables --append FORWARD --in-interface eth0 -j ACCEPT
This is a variation on what I found on other sites describing how to set up a router. I don't understand iptables very well, but I gather that the above two lines should set up forwarding so that traffic from my router to the laptop will be forwarded to the desktop, and vice versa.
But this doesn't work. The connection doesn't even establish between the laptop and the desktop.
Networking :: Network Setup - Router - Wireless Router Card ?
Apr 24, 2010I'm having trouble getting my network set up the way that I want it/had it. You see, when I first set up my network, I just had my cable modem going directly to my standard wired router (A D-Link DI-604), which had DHCP,and was connected to all of the computers on my network. I had one switch hooked up to one of the ports of the router, but this was a regular switch, and it would not try to assign IP addresses, it would just pass through the DHCP info as I wanted.
Now however, my network setup has changed. My room mate and I both got laptops, and we decided that we wanted to have wireless access so we didn't have to constantly plug in to the router.
Now my network is set up like this: The modem is hooked up to the router(DI-604), which is hooked up on the LAN side to our computers, our switch (which is hooked up to 3 more computers), and to a wireless router card (A Gigabyte GN-BC01).
The wireless router card has two jacks for ethernet. One for WAN, and one for LAN. The LAN side we have plugged only into the computer in which the card is installed.
Now the problem is this: The wireless router card comes with DHCP by default, and it's assigning addresses to the laptops and to the computer hat it's in, and worse, the IP addresses are on a different subnet than that of the main dlink router. The Main (dlink) router assigns addresses from 192.168.0.1 (itself) to 192.168.0.254, while the wireless router card assigns addresses from 192.168.1.1 to 192.168.1.254 (itself).
Because of this, I cannot access services on the wireless network from my wired network or vice versa. The first thing I tried was setting the card to assign addresses from 192.168.0.12 to 192.168.0.253, however it just said "internal error" when I tried to do this. I decided that this may be because it sees that it was being assigned an address on it's WAN side on the same subnet. So the next thing I tried was disabling DHCP and setting the "LAN IP Address" to 192.168.0.12, hoping that the DHCP would just go through the card, like a switch. I would have set the LAN IP address to be assigned by DHCP, but this was not an option, so I decided that'd be the best thing to set it to.
Once again however, setting the LAN ip address to an address on the same subnet as that of the IP assigned to it's WAN side caused it to report an "internal error". I verified that this was the issue by setting the LAN address to several other private IP addresses to test (I.E. 10.0.0.1, 192.168.3.1, 192.168.5.12).
My question then really is: How do I set up both routers so that I can access services and computers from each network from the other network. Should I set them with different subnets and set the gateway on the wireless network to the main router? To the wireless router card? Should I put them on the same subnet? Will it know how to communicate?
Here is a link to (picture) my network diagram. Network Diagram
Networking :: Linux As A Router / Bring 147 & 148 IP Online Without Router?
Mar 26, 2009These r IP provided by my ISP that i've put on Fedora 8:
WAN IP:xxx.xxx.xxx.17 (eth0)
Subnet:255.255.255.252
Gateway:xxx.xxx.xxx.18
Valid static(public) IP set of 2:
IP:xxx.xxx.xxx.147 & 148 (eth1, eth2)
Subnet:255.255.255.240
i want to run xxx.xxx.xxx.147 as a web server & xxx.xxx.xxx.148 as a ftp server. but I'm able to ping only xxx.xxx.xxx.17(WAN IP) from outside world. Can any1 tell me that how can i bring my 147 & 148 IP online without router.
Fedora Networking :: Mobile Broadband FC13 Huawei E173 - Cannot Switch Device To Modem Instead Of Storage With Usb_modswitch
Nov 27, 2010I've been trying to make my FC13 Dell d620 work with a Huawei 3G usb modem mode E173. I can not switch the device to modem instead of storage with usb_modswitch. This is what I get on lsusb:
[Code].....
Fedora Networking :: Router IP Different From WAN IP?
Apr 5, 2010I have been playing around with the Apache web server setup detailed herehttp://forums.fedoraforum.org/showthread.php?t=178660 Everything works fine locally, I'm stuck on step 5. www.whatismyip.com says my IP is 208.94.XX.XX. When I try to find my server at 208.94.XX.XX, I see a mikrotik routerOS page which looks like is part of my ISP's hardware. According to my router, the IP of it is 172.16.XX.XX.So I'm guessing my router isn't exposed to the WAN. Is there a way to connect to my server remotely? I have asked my ISP the same question via email, but they are taking their time getting back to me so I thought I could bounce this off of the Fedora Forum.
View 6 Replies View RelatedFedora Networking :: Fedora 10 Live Usb Detects Other WiFi Connections / Not Router
May 27, 2009ok so the router works in windows and i know the config details of it.i can see other wifi access points in the area but not my one. i have tried joining it as a "hidden network" to no avail.is there any reason why fedora would not detect my own wifi when it detects substantially weaker signals instead??
View 2 Replies View RelatedFedora Networking :: Fedora Locks Up Connecting By Wireless To OpenWRT Router
Nov 16, 2009I dual boot Windows/Fedora 11 on my Dell Latitude D830 laptop, which has an Intel PRO/Wireless 3945ABG card and I have just bought a Linksys WRT160NL wireless router. I am currently trying to set up OpenWRT linux on the router. Because of the nature of my problem I have also posted this on their forum.I am having trouble connecting to my OpenWRT install via Fedora. Things seem okay in Windows, but when I try to connect from linux my laptop locks up completely and I have to hard reboot. I previously have never had any trouble connecting to any other router with this install of Fedora.
View 3 Replies View Related