Fedora Networking :: Multiple ADSL Connections To A Fedora10 Box.
May 18, 2009
I got 2 ADSL accounts from a provider, so I decided to configure a server as a gateway for my other PCs.. I created ppp0 device using pppoe-setup over eth0. Then I configured the second one as ppp1 over eth2 to the second modem.. When I finished, I used ifconfig to check the settings and I got only ppp0 and didn't see ppp1, I tried to ifup ppp1 but I still get one device with ifconfig.. The adsl-start command starts only ppp0.What should I do to get the 2 lines to work simultaneously?Are there any configuration files that need to be edited?
View 2 Replies
ADVERTISEMENT
Nov 2, 2010
is possible to use linux (especially slackware) to bond 2 (ethernet modems) adsl connections. For example if i have 2 connection of 24mbs download and 512 upload i will create achieve 48 mgps dowload and 1 mgps upload . something like that
adsl1 modem <------ eth1--- (slackbox router) --- eth0---> my server
adsl2 modem <------ eth2----
View 4 Replies
View Related
Aug 6, 2009
I want to configure my ADSL but I don't know what should I do. Can you explain me How can I configure it?(I use fc10, ethernet cable <Asus Am608 ADSL modem)
View 9 Replies
View Related
Mar 5, 2010
I have a machine that I'm trying to setup as a reverse web proxy. It will have two NICs, eth0 will face the public network, and eth1 will face the "internal" network (connects to a switch that goes out to the other web servers that are statically assigned a private IP address).
When both interfaces are started, I can ping hosts on the 1.2.3.0 network and the 192.168.10.0 network without problem when doing so by IP, but if I try to run a ping or nslookup command with a DNS name, it does not work. I've tried commenting out my entries in /etc/resolv.conf and adding the DNS entries in the /etc/sysconfig/network-scripts/ifcfg-ethX files directly (DNS1=x.x.x.x and DNS2=x.x.x.x), but the results are the same.
View 2 Replies
View Related
Jun 28, 2010
I have a question concerning mobile broadband connections: Is it possible to have multiple mobile broadband connections active at the same time?I currently have two cellphones connected to my Ubuntu box and both of them can successfully setup an Internet connection for my Ubuntu box (say connection X or connection Y), though not at the same time. Unfortunately both connections are very limited in speed (around 10kb/s each. And this is my only access to the Internet where I live). Therefore, I wish to use the two connections simultaneously to download files from the Internet (file 1 with connection X and file 2 with connection Y). Is this method of doubling my bandwidth possible in Ubuntu?
View 5 Replies
View Related
Feb 7, 2010
I really hope someone could help me with this problem. I've been stuck on this for a month.I am using the sftp command to upload files using a bash script.The problem is that it is extremely slow to do it this way. as many of you would know if you have shared server somewhere. I would use scp if remote server supported it, but it doesn't.
Anyway, If any of you have ever used FileZilla, in the Settings, if you go to "Transfers" there is a place where you can set the number of "maximum simultaneous transfers". This feature works wonders with SFTP (and FTP too). It really speeds things up. How do I accomplish this same thing with the sftp command... because I don't want to use a GUI. I don't even mind using FileZilla through the command line if possible... but it does not seem to be possible. I've been stuck on this for a month!!! I've searched everywhere and tried a lot of things with no avail...
View 6 Replies
View Related
Sep 20, 2010
I am total newby in Ubuntu 10.04. I have just installed it in my office where I have two networks card one connect to a router giving the internet access and the other connected to the windows based work network providing access to the work network sources. In XP everything works fine as I can keep both connections alive and have the results I want.
However although I don't know how to do it in Ubuntu 10.04. Till now I have setup the first connection directly to my router and I have internet access but I cannot set the other one. Another question is how I can force ubuntu to use the router connection as the default one when I log in.
View 5 Replies
View Related
Dec 4, 2008
What I want is quite simple, I have my PC running Linux Mint 5 (Elyssa), and I would like to connect it to both an internal network, which has a file/print server, another machine and will soon host a small cluster. I also have a wireless router connected to the tinterweb.
The thing is using my ethernet I want to connect to the internal network whilst simultaneously using my wireless to deal with the internet, I want to keep the internal network off the net as it really doesn't need to be connected. I can connect to my internal quite happily and also my wireless but not both at once.
View 5 Replies
View Related
Jul 8, 2010
Running Fedora 13 and have it working great acting as my firewall/router/samba server etc. The problem is the connection is shared by a fair number of us and the ISP is getting annoyed with the amount of torrent traffic. One of us has access to a wireless network and we'd like to figure out how to route some of the traffic through that without having to disconnect from the current network. I put a wireless card in the fedora box and can connect to the wireless but then it messes up the current network and pretty much nothing works.
At the least if I could run a torrent client (e.g. ktorrent or whatever) on the Linux box and have it download through the wireless card on tcp port XXXXX I would be happy. The torrent client and those tcp/udp ports can be dedicated to that wireless card, the rest of the network doesn't need to get involved if that makes things simpler. Not looking for a step by step tutorial, just an explanation of what needs to be done and a shove in the right direction. My experience is limited to single WAN connections up to this point.
View 1 Replies
View Related
May 25, 2010
I'm running ubuntu lucid and i was thinking in purchasing one or more extra wifi cards to try to configure my computer to manage different conections at the same time, with different isp's. The thing is that I'm not quite sure if what i want to do is actually possible.
The easiest way that crossed my mind was to try to configure a / multiple virtual machines that are redirected threw proxies to ubuntu and try to configure that each proxie port goes threw a different internet gateaway. This way i might be able to divide threw different sessions of JDownloader, installed on each virtual machine, the things i want to download. The negative aspect of this idea is having multiple jdownloader sessions will make my laptop work to almost 100% for sure...
Another thought i have was to make JDownloader manage its downloads in only one session redirecting them to my internet conections; the negative thing is that i think i will have to try to modify its source and learn java...
And well my last possible configuration i had in mind was to try to make ubuntu directly add up all my internet conections manage as if it was one. the negative thing here is that i might not be able to get multiple downloads from some sites
Well, all this where just thoughts, im struggling whether to buy another card or not to try to setup any of this configurations but im not really sure if any of them are actually possible. Is there an easy way to manage this?
I just want to take the most out of my internet conections... if i'm at college i have to options that are quite slow, adding them up with two cards would be great, i might also be able to add a third and a fourth conection. Also if i'm on a coffe and i need some bandwith i could try to make it go with an open network arround, etc.
View 1 Replies
View Related
Jan 22, 2009
I'm using ADSL connection as a way to access internet.All of us know that in windows we can get configed easily.But it is a little more difficult in Fedora.How can we config ADSL connection in Fedora 10?My modem uses dynamic ip.
View 14 Replies
View Related
Mar 7, 2009
I have an valid account,and I used pppoe-setup to set the dial correctly.After the configuration,I typed "ifup ppp0",nothing wrong happens(no news is good news?).Then I typed "pppoe-status",it said I've connected to the internet . I opened firefox,updated my system through yum ,they all said I haven't connected to the network!!!I've formated my harddisk and reinstall my system,but the problem is still.
View 4 Replies
View Related
Mar 23, 2009
I have D-Link GLB502-T ADSL router with MTNL TriBand connection.I am currently using Fedora 10. I have successfully setup the ADSL router in bridge mode, and can connect to net using network-manager.
Now I need to know how to start this connection using command-line. I intend to schedule auto restart of the connection for my night unlimited connection.
View 2 Replies
View Related
Oct 2, 2009
"I am new to Linux. Could you please guide me how to make ADSL bridge connection. I have tried to make connection using Network manager. But, it some times works and some times doesn't works."
View 1 Replies
View Related
Nov 3, 2009
I have a problem.ADSL modems not see my hostname.My hostname is "unknown"
Code:
Code:
View 11 Replies
View Related
Apr 11, 2010
how to make pppoe (ADSL) connection on fedora 12
View 2 Replies
View Related
Nov 24, 2010
My Laptop can Connect to my wireless modem device, but I don't know How can I connect to internet (ADSL) by My laptop (Bridge)?
View 6 Replies
View Related
Mar 16, 2011
I'm still fairly new to Linux so please forgive me if my description of my problem leaves out important information. My problem is centered around using a AT91SAM9G45 development board (DB)on Fedora 10. I have directions on how to setup on my host machine a DHCP server to connect to the development board. I have installed an additional network card (eth1) that will be used exclusively to communicate with my DB.
The DB has been setup with an ethaddr=12:34:56:78:9a:bc and an ipaddr=192.168.251.191.
The following is info from ifconfig for eth1:
eth1 Link encap:Ethernet HWaddr 00:0A:5E:1A:46:1C
inet addr:192.168.251.190 Bcast:192.168.251.255 Mask:255.255.255.0
inet6 addr: fe80::20a:5eff:fe1a:461c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:38 errors:0 dropped:0 overruns:0 frame:0
[Code]...
View 3 Replies
View Related
Sep 19, 2009
My broadband internet connection came with a Nokia-Seimens C2110 Adsl modem. Please help me connect the modem through USB cable as the ethernet card is used to connect my computer(Asus- P5RD2 VM motherboard) to a different computer on LAN. I am in a fix and have no clue how to proceed.
View 1 Replies
View Related
Nov 22, 2009
I have a pppoe adsl connection. When I disconnect and try to reconnect, network-manager keeps asking for my password. I type it again and again with no success. When I reboot, it works again. On ubuntu, I use pppoeconf and it works well. So on Fedora I made a connection with pppoe-setup but neither ifup nor
Code:
pppoe-connect
commands work. When I type
Code:
pppoe-connect
, it says
Code:
/usr/sbin/adsl-start: line 217: 13409 Terminated $CONNECT
"$@" > /dev/null 2>&1
. When I type
Ifup ppp0 doesn't work either. However, with exactly the same settings, ubuntu connects to the internet.
View 2 Replies
View Related
Jan 28, 2009
trying to understand the two underlined sentences below I got to ask Step by step. I created a new group called usb. I inserted a usb printer and scanner. I tried to find the file usbfs and there is where get stuck already. I only can find a folder with that name. The sentence (3 -) makes almost no sense to me.
a) modify file /etc/fstab clear open terminal, go to etc, su gedit fstab
b) inserting a line yes I understand that!
c) the right path and the number corresponding the "usb" group :
none /sys/bus/usb/drivers usbfs devgid=503,devmode=664 0 0
2 - locate file usbfs: in my case is /sys/bus/usb/drivers (I suggest to find the file with a usb device inserted;
3 - modify file /etc/fstab inserting a line containing the right path and the number corresponding the "usb" group :
none /sys/bus/usb/drivers usbfs devgid=503,devmode=664 0 0
View 5 Replies
View Related
Feb 13, 2010
I have windows 7 Ultimate and want to install Fedora 10. Could somebody can suggest me some tutorials of installation of Fedora 10 ? and also I am worried about losing boot sector which has happened to me already. how to recover the boot loader for linux safely ( ofcourse with dual boot ability after recovering) ?
View 1 Replies
View Related
Jul 13, 2011
I'm trying to get VNC setup so I can have multiple people connected to the VNC server using the same username.
View 3 Replies
View Related
Feb 18, 2010
A deamon say ssh will be listening on port 22. when a new connection is requested by the client, it will be authenticated and a new connection gets establihed with some port say 1025. And ssh will continue to listen on 22 for new connections.If I am correct then in my machine I observed following connections are establised to ssh port 22, As per my understanding connection should be established on a different port other than 22.
View 3 Replies
View Related
May 30, 2011
I recently installed Fedora 15 now, and during installation I set the internet connection manually, then did update and after reboot, the internet connection settings have been removed. Now I can not set because the network connection to the Internet Connection is inactive. I mention that before the update was functional internet connection.
View 5 Replies
View Related
May 25, 2010
I'm curious how I can use a Windows client with two separate accounts to connect, at the same time, to a SMB server hosting two shares. (Provided permissions and accounts are all in order)
Scenario:User1 is always logged onto a Windows client mapped to a Public share on a Linux SMB server.I need a way to keep User1 connected to the Public share and then when needed, allow User1 to provide User2's credentials to connect to a Restricted share.The only way I've been able to do this is to disconnect from the Public Share then reconnect to the Restricted share using User2's credentials. (This is the issue because I need to keep User1 connected to the Public share).Is this a limitation of SMB? Or am I missing a configuration? Please point me in the right direction
View 5 Replies
View Related
Jan 27, 2011
I just installed Fedora 14 in a hard disk of my PC. I installed MySQL also. I dontt know if this is the correct site for my question, but nobody MySQL related, have an answer yet. For MySQL accepting remote connections, my.cnf file must be edited (bind-address line or skip-networking line in that file). Well, that file in my Fedora-MySQL installation does not have such lines, so i assume, TCP/IP connections are allowed in MySQL. When i try to connect to the MySQL server it refuses the connection with the error 2003, that in short, means no TCP/IP connections are allowed. I disabled the firewall and retried but with no success, enabled the firewall again, and nothing happen. Is Fedora not accepting TCP/IP connections?
View 5 Replies
View Related
Jun 18, 2009
once I updated , there will be no connections to Internet in GUI , while it's available in TUI . So it's wired , huh ? Before upating, it's available both in TUI and GUI, though all the time the network-manager shows no connection , in fact , there is and both GUI and CUI . Now I updated , and it can't access Internet from GUI.
View 2 Replies
View Related
Sep 1, 2010
Latest kernel update since Fedora 2.6.33 are mapping all my NFS "shares" twice (two sets of icons, etc.). All work, but why is this happening - was fine previously.
View 2 Replies
View Related
May 27, 2009
ok so the router works in windows and i know the config details of it.i can see other wifi access points in the area but not my one. i have tried joining it as a "hidden network" to no avail.is there any reason why fedora would not detect my own wifi when it detects substantially weaker signals instead??
View 2 Replies
View Related
