Fedora Networking :: 11 - ADSL Modems Not See My Hostname - Unknown
Nov 3, 2009I have a problem.ADSL modems not see my hostname.My hostname is "unknown"
Code:
Code:
ADVERTISEMENT
Networking :: Using Two ADSL USB Modems At The Same Time?
Dec 9, 2010Q: How can I use at the same time two ADSL USB modems with pppd and pppoatm.so plugin?
I have the following scenario:
- Two ADSL USB modem correctly recognized by Linux.
- pppd configured with two different files, one for each ADSL (even if the two ADSL have the same parameters). Those files are /etc/ppp/peers/adsl1 and /etc/ppp/peers/adsl2
If I attach only one modem and then launch "pppd debug call adsl1" or "pppd debug call adsl2" everything works fine.
If instead I attach both modem in order to have two ppp interfaces, ppp0 and ppp1 I get the following behaviour:
- When launching "pppd debug call adsl1" the first modem connects correctly.
- When launching "pppd debug call adsl2" I get:
connect(8.35): Address already in use
That's because either adsl1 and adsl2 are trying to use the same modem.
So the question more specific question is: How can I specify which USB modem to use in pppoa ADSL connections?
With dialup modem it is possible to specify /dev/ttySx in peers files, but what about ADSL USB modems?
Networking :: Systems Communicating Using ADSL Or Modems Using Phone Lines?
Apr 21, 2010I have two systems located far from each other approximately 15 kilometers. They dont have communication between them only thing is phone.
The one system want to connect other using the telephone line using ADSL or simple modems. To transfer the files or to use VNC, RDP.
What linux, windows softwares presently supporting this feature. I Want to communicate between two systems without Internet but only with the phone lines.
establish the connection between two using phone line (without internet).
Fedora Networking :: Configure ADSL Using Use Fc10 - Ethernet Cable <Asus Am608 ADSL Modem>
Aug 6, 2009I want to configure my ADSL but I don't know what should I do. Can you explain me How can I configure it?(I use fc10, ethernet cable <Asus Am608 ADSL modem)
View 9 Replies View RelatedFedora Servers :: Gnome Error - Hostname: Unknown Host
Mar 23, 2009I installed Gnome on my server by when I run
Code:
[root@F026 ~]# startx
Code:
hostname: Unknown host
xauth: creating new authority file /root/.serverauth.2915
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.18-128.1.1.el5 i686
[code]...
I don;t have physical access to the system and it is a server located in Europe. Fedora release 10 (Cambridge) is installed in it.
General :: Hostname: Unknown Host
Jan 15, 2010I am installing ISPconfig on a Ubuntu server 9.10. When i write hostname -f i get the unknown host message.
View 4 Replies View RelatedGeneral :: Ubuntu 9.10 Networking Hostname / Can Ping The Linux Box Using Its Hostname From A WinXp. But Cannot Do The Reverse?
Jan 3, 2010I have a network of 2 WinXP machines and one linux box. I have fiddled around with the settings as you do when learning. The network is working. The network neighbourhood on the WinXP machines recognise the linux box and vice versa, (the linux Places|Network recognises the 2 WinXP). I can Ping the linux box using its hostname from a WinXp. But I cannot do the reverse. I get an 'unknown host' response. I can ping the linux to itself using its hostname.
View 7 Replies View RelatedFedora Networking :: Config ADSL Connection In 10?
Jan 22, 2009I'm using ADSL connection as a way to access internet.All of us know that in windows we can get configed easily.But it is a little more difficult in Fedora.How can we config ADSL connection in Fedora 10?My modem uses dynamic ip.
View 14 Replies View RelatedFedora Networking :: Can't Get Access To Internet Through ADSL?
Mar 7, 2009I have an valid account,and I used pppoe-setup to set the dial correctly.After the configuration,I typed "ifup ppp0",nothing wrong happens(no news is good news?).Then I typed "pppoe-status",it said I've connected to the internet . I opened firefox,updated my system through yum ,they all said I haven't connected to the network!!!I've formated my harddisk and reinstall my system,but the problem is still.
View 4 Replies View RelatedNetworking :: FC13 Install Can Ping By Hostname - Ssh By Hostname Fails
Jul 29, 2010I'm having an issue on two Fedora Core 13 machines where I can ping others by hostname, but the hostname resolution fails whenever I use ssh/scp/vnc/etc. I can still do these things by IP address, just not by hostname. RHEL5.3 machines on the same network with the same configuration do not seem to have this problem.
Here's the not-so-quick-and-dirty description of the situation:
I know that there is a virtual router at 192.168.31.1 and another at 192.168.30.1. I also know that there is another network (let's call it 90.90.90.0) and on that network lies a number of resources. By nature of this configuration, any machine on 90.90.90.0 can be accessed by any 192.168.x.x, but not the other way around. Beyond that is out of my hands and currently out of my scope of knowledge.
I have a dnsmasq server on 90.90.90.10 that operates as a secondary nameserver, another machine out of my sphere of influence is the primary nameserver (90.90.90.31).
The secondary nameserver on 90.90.90.10 holds the hostnames of our development machines. The problem is that in some cases, while I can ping by hostname all day long, services such as ssh, scp, vncviewer, etc all fail to resolve the hostname. In other cases I can do all of these things.
Every machine has an equivalent resolv.conf:
As an example, I will show the output of a handful of my development machines:
I also included columbia as a one-way test -- even though it cannot access 30.x or 31.x, they can access it:
columbia -- physical machine, Red Hat Enterprise 5.3, IP 192.168.100.200
Okay, so here are the various outputs. Remember, nibbler, discovery, and atlantis can ALL:
- Ping by IP address
- Ping by hostname
- ssh, scp, vnc, etc by IP addess
Additionally, the SERVFAIL reply from 90.90.90.31 is expected since my dnsmasq server is on the secondary server.
Note that the only machine that can both ping and ssh/scp/etc by hostname is nibbler, which also happens to be the only one of the three running RHEL5.3 instead of FC13. Other virtual and physical machines running on the 192.168.31.0 and 192.168.30.0 networks (all running RHEL5.3) work just like nibbler does. So the problem seems to only affect machines running FC13.
Final note: selinux is disabled, iptables is disabled, ip6tables is disabled.
Other than that, discovery is a brand-spanking-new install straight off of the FC13 DVD. atlantis has been around longer, but its just a file server so I haven't done anything too crazy to it.
Ubuntu Networking :: Pinging Hostname Rather Than Hostname.local?
May 24, 2010I'm trying to ping another Ubuntu computer on my local network. If I try doing,ping <hostname>then I get the messageping: unknown host <hostname>however, if I doping <hostname>.localthen I get a response back. I was wondering how I can change it so that I can ping without having to append .localI've installed winbind and modified my /etc/nsswitch.conf file but this has made no difference.
View 2 Replies View RelatedUbuntu Networking :: Hostname Changed But Email Still Using Old Hostname?
May 22, 2011I have an ubuntu 10.04 server with hostname "abc.domain.com". However, due to migration, we had to change to hostname to something else, "xyz".
I have done changing /etc/hosts and /etc/hostname and run /etc/init.d/hostname start.
Checking the hostname and all shows it is now using hostsname of xyz. However, email sending out is still using old hostname. We have some scripts that will send out alerts like failed rsync or hdd space full to my email account. But I see the sender is still "root@abc.domain.com".
How do change that to xyz? I am using postfix. I have edited main.cf and restarted postfix but no go.
Fedora Networking :: Start An ADSL Connection Using Comandline?
Mar 23, 2009I have D-Link GLB502-T ADSL router with MTNL TriBand connection.I am currently using Fedora 10. I have successfully setup the ADSL router in bridge mode, and can connect to net using network-manager.
Now I need to know how to start this connection using command-line. I intend to schedule auto restart of the connection for my night unlimited connection.
Fedora Networking :: Multiple ADSL Connections To A Fedora10 Box.
May 18, 2009I got 2 ADSL accounts from a provider, so I decided to configure a server as a gateway for my other PCs.. I created ppp0 device using pppoe-setup over eth0. Then I configured the second one as ppp1 over eth2 to the second modem.. When I finished, I used ifconfig to check the settings and I got only ppp0 and didn't see ppp1, I tried to ifup ppp1 but I still get one device with ifconfig.. The adsl-start command starts only ppp0.What should I do to get the 2 lines to work simultaneously?Are there any configuration files that need to be edited?
View 2 Replies View RelatedFedora Networking :: Make ADSL Bridge Connection In 10?
Oct 2, 2009"I am new to Linux. Could you please guide me how to make ADSL bridge connection. I have tried to make connection using Network manager. But, it some times works and some times doesn't works."
View 1 Replies View RelatedFedora Networking :: Make Pppoe (ADSL) Connection On 12?
Apr 11, 2010how to make pppoe (ADSL) connection on fedora 12
View 2 Replies View RelatedUbuntu Networking :: AT&T DSL Compatible Modems
Nov 11, 2010I am moving and am having AT&T DSL set up at my new place.. It is going to be set up next monday and I opted to not purchase their DSL modem (I wouldn't be there when it would be delivered and it would have been stolen most likely) So, anyone know of a DSL modem compatible with AT&T DSL that will work that I can pick up at a chain store? Wal-Mart, etc...
View 1 Replies View RelatedFedora Networking :: Connect To Internet (ADSL) By Laptop (Bridge)?
Nov 24, 2010My Laptop can Connect to my wireless modem device, but I don't know How can I connect to internet (ADSL) by My laptop (Bridge)?
View 6 Replies View RelatedNetworking :: USB Wireless Modems For Inet Access?
Aug 13, 2010I'd like to use one of the popular USB wireless modems for Internet access. If Linux supports this, I assume that the required driver is in the kernel, and that connection would be automatic. Has anyone had experience with this?
View 5 Replies View RelatedUbuntu Networking :: Router With Multiple USB HSDPA Modems?
May 2, 2011I'm looking with some multiple WAN links on an Ubuntu router box I am building for a project.The setup I'm trying to achieve is this:
eth0 WAN Link 1 through ADSL modem
USB Modem 1 WAN Link 2 for Failover
USB Modem 2 WAN Link 3 for Failover
[code]...
Ubuntu Networking :: Load Balancing Server With 2 3G Modems
Jun 26, 2011I would like to say first and foremost that I have tried to lookup what I can find about this thing I am doing and most of the time all I have found are either un-replied posts or vaguely explained answers but here is what I want to do.I want to setup a small gateway for my new office using two 3G internet providers offering Huawei usb modems. So I would like to have two internet links active per time and have one LAN consuming from the two links. I have seen the phrase Load Balancing all over the place but they all show their examples using ethernet and static IP's. My providers give DHCP ip addresses so is there anything I need to know and can anyone point me in the direction of some tutorial or howto i can follow to do this?
View 2 Replies View RelatedNetworking :: Connect Nokia Seimens C2110 ADSL Modem Through USB Cable In Fedora 11
Sep 19, 2009My broadband internet connection came with a Nokia-Seimens C2110 Adsl modem. Please help me connect the modem through USB cable as the ethernet card is used to connect my computer(Asus- P5RD2 VM motherboard) to a different computer on LAN. I am in a fix and have no clue how to proceed.
View 1 Replies View RelatedFedora Networking :: Network Manager - Adsl Connection - Ifup Ppp0 Doesn't Work
Nov 22, 2009I have a pppoe adsl connection. When I disconnect and try to reconnect, network-manager keeps asking for my password. I type it again and again with no success. When I reboot, it works again. On ubuntu, I use pppoeconf and it works well. So on Fedora I made a connection with pppoe-setup but neither ifup nor
Code:
pppoe-connect
commands work. When I type
Code:
pppoe-connect
, it says
Code:
/usr/sbin/adsl-start: line 217: 13409 Terminated $CONNECT
"$@" > /dev/null 2>&1
. When I type
Ifup ppp0 doesn't work either. However, with exactly the same settings, ubuntu connects to the internet.
Ubuntu Networking :: List Of Kernel-supported Mobile Broadband Modems ?
Jun 4, 2010I am looking to buy my own unlocked/never-locked mobile broadband modem, and I want it to work well on my 64-bit 10.04 Ubuntu system (triple-booting MacBook 4,1). Is there a list of mobile broadband modems supported in the linux kernel out there somewhere? I did try to find one myself, but no luck. The Huawei E220 looks good, but it is discontinued.
View 2 Replies View RelatedFedora Networking :: Hostname Cannot Be Resolved
Feb 1, 2010Running Fedora 11.
Did get a Kimsufi dedicated server through [URL] When I did get it the hostname resolve does not work.
I have never got any of this problems before so this is my first time playing with the network settings.
Nothing works! Lynx, wget, yum and so on. IT works if I do enter the hostname by its IP. But thats not working in the long way
Quote:
ping cnn.com
ping: unknown host cnn.com
Quote:
#nslookup cnn.com
Server: 127.0.0.1
Address: 127.0.0.1#53
[Code].....
Fedora Networking :: DSL Modem PC Name Is Not Hostname
Nov 13, 2010When I use Ubuntu, my DSL modem correctly gets the hostname I call my computer "mertensia", but I'm having issues with Fedora. Yet, when I look at the name assigned by the modem (using URL... in a web browser),I need the PC Name to be mertensia, because otherwise it will complicate how I ssh immensely.
View 4 Replies View RelatedFedora Networking :: Cannot Ping By Hostname On 14
Jul 3, 2011I have 4 installations of Fedora 14 running on a Win 2008 R2 server in Hyper-V.
When I try to ping my desktop or the host server via the hostname from within any of the Fedora installations, the ping fails. I can ping by IP without issue. Also if I try to ping the VMs from my desktop it fails. I have an XP VM setup that I can ping without issue via hostname and IP.
All of the VMs can access the Internet without issue. I have disabled all firewalls on all systems with no luck. My desktop can ping the Hyper-V server without issue so it would appear that the problem lies with the Fedora installations.
My resolv.conf
Code:
Does anyone have anything I can try to get the name resolution working?
Ubuntu Networking :: 10.10 - Use Multiple Mobile Broadband Modems - All Attached Modem Is Automatic Go Offline
Oct 28, 2010I tried to use multiple mobile broadband modems in ubuntu 10.10 and encounter a bug as follows:
When i plug in a new modem, all the attached modem is automatic go offline ( thus my connection is down), and try to redial back, sometime the redial is successful, sometime it's not.
It was working fine in ubuntu 9.10, plug in a new modem, all attached modems stay connected.
Fedora Networking :: No Hostname On Windows Workgroup?
Mar 8, 2009So everything seams to be fine on my F10 boxes networking. I can ping computers on the network with both LAN IP addresses, and their hostnames. However, I can only access my F10 box with a LAN IP. In windows, I go to view workgroup computers... only the windows systems. If I go to the F10 system with samba via the IP address it works fine, just can't get to it with a hostname.
I'm wanting a static IP of 192.168.1.22. And on the windows workgroup "workgroup".
I'm new to doing things with linux that are remotely difficult... and well, this has proven to be. I can't work out if this is a SMB problem, general networking...
smb.conf (I've ommited the top info segment due to forum character limit, as well as the SELINUX notes)
Code:
#======================= Global Settings =====================================
[global]
# ----------------------- Netwrok Related Options -------------------------
#
[Code].....
Fedora Networking :: How To Change Hostname To Rodder
Oct 1, 2009Yesterday, while trying on establishing mobile broadband, my hostname changed, and I can't make it yet. My /etc/hosts is
1 127.0.0.1 pc-194-101.fysik.uu.se localhost.localdomain localhost
2 127.0.0.1 pc-194-101.fysik.uu.se roddur
3 ::1 localhost.localdomain roddur
The second line I edited but after a reboot it inserted the first line all automatically and my /etc/sysconfig/network is
1 NETWORKING=yes
2 HOSTNAME=roddur
What I have to do if I have to change my hostname to "roddur"?