Fedora Networking :: Fedora 13 X64 Keeps Disconnecting From Network
Sep 29, 2010
I've seen many threads of this type, but I didn't see anyone simply say what the problem is. There's got to be something happenning to make it disconnect, and then something else makes it so it can't re-connect.What I get is that it connects for some time (maybe a short time, maybe a longer time) but eventually it just disconnects. When I try to re-connect wpa_supplicat log says simply it's trying to associate with the AP; it's associated with the AP; and then it's disconnected: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
It is a home-built with AMD64 and a D-Link DWA-160 A2 (Atheros AR9710) and Netgear extreme 300 router AP. The router log shows it is in fact connecting for a short while only to be disconnected at my computer's request.This is Fedora 13 out of the box (sort of!) except that I have the development repos and the updates repos and the RPM fusion repos installed. I have NM applet running. I use one called simply "network", and also one called "control network devices". but they all lead to the same result that it can't reconnect. If I play with it enough doing any variety of changes I can eventually get it to reconnect, but there's no telling what action was the successful one. I just think it reset whatever was bothering it. But, as I saw another thread describe, if I delete ALL network connection definitions and reboot, it will find the network and it will connect. But sooner or later I'll be back to where it disconnects.So, does anyone actually know what the major malfunction is? It should have been identified and qualified and quantified by now so that there's a simple write-up of cause and fix. But thru all my googling I can't find anything definite. If anyone has some good answer please post it so we all can benefit.
View 7 Replies
ADVERTISEMENT
May 29, 2010
Its been like this since fedora 12, in fedora 11 its no problem, i hope it will be fixed in fedora 13 and i am waiting..., and after fedora 13 released the problem is still the same...
I use Intel 3945ABG. wifi connect with no problem and after few seconds its disconnected, and re-asking my saved password (which is stupid since i save the password so fedora won't ask me that stupid question again).
View 1 Replies
View Related
Jan 25, 2011
I have a MSI netbook, U100, on which I've installed Ubuntu 10.10. This keeps disconnecting from the network, though the applet shows me that the netbook found it. I mention that I have a wireless network and another laptop, with WIN 7, where I have no problems with the Internet connection. I also have a 3G USB modem, which let me connect without problem.
View 3 Replies
View Related
Mar 14, 2010
a while ago, Network manager kept on messing around and disconnecting me etc. I attempted to setup a static network (wired) and since then, everything worked fine. I also have apache running and have had no problems with that. I know there were some apache auto updates this week but I have been doing no dev work. I went to check out one of my local sites to do some work yesterday and there was just nothing happening.
I checked everything with apache, it is all running etc. I have stripped back the conf files to be clean and fresh and netstat is showing apache as listening on 127.0.0.1:80 as it should for a single default site that I have on there now. BUT if I try to ping localhost by name or by 127.0.0.1 I am getting "Destination Port Unreachable" Since I have been trying to fix this, I have been trawling the internet to try and clean up my network setup from scratch (I have also had problems with https sites that has turned up to be the MTU setting on my eth0 interface) but to be honest I am not sure exactly what should be set between ifconfig, route, netstat and apache. should I be able to ping localhost independantly of running apache2 (i.e if it is stopped) or would a successful ping rely on apache working correctly.
View 6 Replies
View Related
Apr 18, 2010
I have a broadband mobile modem iCon 225 (Option) with SiMobil provider (Slovenia). I run ubuntu 9.10 (Karmic Koala). I connect to the internet without problem. After a few minutes, the modem lights start signaling that there is no connection, but the network manager shows connected status. I have to reconnect the network manager to regain connection. After about a dozen times of reconnecting like this, I have to reboot the system, as it won't connect, even if I unplug and replug the modem.
I've noticed these frequent disconnects have started a few days ago. I did experience disconnects in the past, but as nearly often as this. I can't attribute disconnects to activity/inactivity, as they seem to happen no matter what I do.
View 5 Replies
View Related
Jun 22, 2010
I'm using BSNL(India) EVDO service. I got ZTE dialer for Fedora and it works fine. But it has started causing error which was not seen when I installed system freshly. It's just been a week and whenever I disconnect ppp interface, xmessage window open and I see error message.
View 1 Replies
View Related
Feb 9, 2010
I installed vpnc package under RHEL 5.1 64 bit and its working fine. but it is showing frequent disconnectivity issue. I did added the script for respawning:
Code:
I have just added but no idea if it will work or not.Downloaded from external source.
1. How to check vpnc logs upon disconnectivity?
2. How to make the connectivity stable?
View 2 Replies
View Related
Sep 12, 2011
I'm running Arch Linux on an Acer laptop and my wirless connection doesn't stay up. After a while it disconnects, and when I try to reconnect I get stuck with a "Waiting for authorization" message. I have to retry several times before getting the connection stay up for few minutes. This happens with both networkmanager and wicd. The strange thing is that the iMac that sits next to the laptop connects fine, and when I use my laptop within the university wireless network it works normally.
EDIT: I've tried to connect manually following the steps
iwlist wlan0 scan
wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf
dhcpcd wlan0
[Code].....
View 1 Replies
View Related
Mar 2, 2011
I have installed qemu/kvm and created a Bridged network connection which works just fine(Windows 7 VM won't work in NAT mode.)
But when I try to use NetworkManager it says that I have no network connection because the network isn't managed, (I set the settings in ifcfg-br0 and ifcfg-eth0 to be managed)
The real problem is that now I can't use my VPN connections (I have many) in NetworkManager.
Is there a way to have both of these pieces of functionality?
I am using FC14
View 5 Replies
View Related
Aug 21, 2010
I am newbie to linux, I am dealing with Fedora core 13. I have already succeedded in building an ad hoc network and a WLAN network. My next step is to get some networking statistics such delay, throughput, etc. So, I need traffic to flow through the network for both multimedia traffic and bulk data traffic. How to send files between nodes on the network (I found commands ftp, rcp but do not know whether they are the correct choice for this). ID their any application to perform this?
Also, I want to perform some video streaming between two nodes to study the behavior of real time data transfer. Is thier any application to perform this?
View 4 Replies
View Related
Jul 29, 2011
I am a newbie when it comes to linux, but know a little (the little bit of dangerous stuff).I have set up a home web server for when I am testing website using PHP, mysql and other funky stuff. This is a reflection of my production server as far as I can with my limited knowledge.I am also using this box to learn more about the Linux operating system and I doing this slowly. Before I installed the GUI (Gnome) I was using a text based server, this was working fine and running absolutey fine and never disconnecting. This has been fine and working 24/7 for around a month.
At the weekend (just gone) I ran the following at terminal
# apt-get install gnome
This gave me a GUI so I could try some other things.
When the computer is idle the network card seems to drop the connection, Im trying to see after how long it does this. I have seen this work fine after an hour, but after a night, the network has been dropped. This is a hard wired connection to the router.first time I thought the PC had froze so rebooted the PC, but the second time, I plugged a mouse into it and noticed the the network icon had changed, after right clicking on it, i noticed that It had dropped the connection. After clicking the "reconnect" option it is back up and running.
View 6 Replies
View Related
Jan 23, 2010
I am running a 3-G wireless USB broadband modem, and connecting with Network Manager, but I keep getting disconnected when idle after 5-6 minutes. I am used to using Kinternet to connect with my 3-G wireless USB broadband modem, and setting it up in Yast / Network / Modems, but was not able to configure my modem there (for some mysterious reason) so ended up using Network Manager instead.
What's going on here regarding YAST being unable to configure my modem (even when Network Manger is disabled). But my main problem at this point is that my connection times out after about 6 minutes if I'm idle. This is a big problem for me because I type slow and frequently get disconnected while posting on message boards. Where are the idle time out settings are for Network Manager? I can't seem to find them.
View 3 Replies
View Related
May 16, 2011
I just upgrade my Fedora 14 to Fedora 15 RC1.I found the critical issue for me that Juniper Network connect(SSL VPN) didn't work for me again.I wonder if the network interface name changed impact this, but I am not sure about it as I didn't see any obviously error.I can connect the VPN auth page with my username and password after I switch my Java plugin to Sun JRE( I use google Chrome).As the Java VPN applet started, it appeared for a while and shutdown again. I think the VPN auth has been passed at that time, the problem might about creating the VPN Tunnel.
View 8 Replies
View Related
Oct 19, 2010
I recently bought a new Netgear WNDR3300 Wireless-N router, and cannot seem to see the linux box in my windows network. (We have multiple Windows machines on my network, all in the same workgroup.) I also recently bought Avast anti-virus, and I think I have enabled the IP range of all computers to enable communication. I wonder if a media router has different needs than just the regular router I used to use. My samba file is minimal, I will post an example. I wish my Windows computer to access a drive marked /terminal on my linux box. I have a drive on my Windows marked E:Cher on my Vista box. My workgroup name is BRCR.
View 3 Replies
View Related
Aug 30, 2011
I'm a new fedora-user and are having some problems setting ut everything as i want:
The host to always use WIFI
The host to not see the ethernet-connection.
The guest to use ethernet
The guest to be able to get wifi when no ethernet is avaible.
The guest to install from PXE
The guest is going to be a Windows 7. Nothing is done so far, as i cannot figure out how to do this.
View 1 Replies
View Related
May 1, 2011
I want to know any command which is equal to disconnecting and reconnecting lan cable. actually sometimes my router takes some time to connect to internet and when this happens my desktop shows network disconnected. but when router is connected system does no detect it and i have to manually disconnect and reconnect the cable which is not convenient.
I have debian 6.0.1 (squeeze) with gnome 2.30.2
And i have already tried following commands:
View 10 Replies
View Related
Apr 24, 2009
Just now I have install Fedora 10 on my desktop computer and network card is appearing as "eth1", manually i have set the IP and subnet mask and dns setting also i have checked the option starts automatically when computer starts, but after restarting my network is not activated.
View 2 Replies
View Related
Apr 7, 2009
Using Fedora 10, can anyone tell me how to setup the network scripts to create two network interfaces for vlan x and y. Both interfaces should obtain an ip from dhcp and both interfaces should run over eth0.
View 2 Replies
View Related
May 25, 2010
Cannot activate network device eth0!"device eth0 does not seem to be present, delaying initialization".i cannot find my network card while i set up network configuration Now I use dual boot window 7 and fedora 9,I cannot find my network card in select network adapter while network configuration ,i have a network card Atheros AR8132 PCI-E fast Ethernet controller NDIS(620)and for wired in Accer laptop .
View 1 Replies
View Related
Sep 20, 2010
Currently my office use a Cisco Firewall which will only allow the ANYCONNECT utility to do the vpn connection. I found a Linux utility (OpenConnect) which will do the same thing, but allow me more flexibility with my networking needs.What I ultimately would like to have is to have a switch that I can connect any network device into it and be connected to the office. IE (my IP Work Phone and Computer) Currently I have is a computer with fedora 13 and two network cards eth0 (home network - connected to a router) and eth1 which I would like to connect a switch to. OpenConnect communicates fine and I can see the work network from the Fedora machine. It creates a vpn0 tun/tap device and I don't know how to pass communication to/from the eth1 device.
Do I try to iptables the ports for the phone and services I need on the computer? Or do I build bridge; and If I do what am I bridging. I have tried making a bridge from eth1 to vpn0 which reply's with unsupported device or something like that.Unfortunately my network skills are bit limited and my office says "it can't be done". Their solution is for me to buy a ASA5505 (or something device) and have a static IP. I would have to make it work as my router and even then it will only DHCP 10 ip addresses; which will cause a shortage of IP addresses in the house.
View 1 Replies
View Related
Mar 9, 2010
Wifi seems to disconnect fairly requently, sometimes reconnecting automatically and sometimes requiring me to re-enter the wep password.
I would like to make it so it stays connected.
The router is not very close, but I think it's close enough. I even moved it closer. Other devices (such as my N900 mobile phone) hold the connection without issue.
One complication is that there are several devices all with the same SSID, though there should be one which is clearly stonger.
Details below.
1 ) Machine Brand and Model (PC/Laptop):
Code:
2 ) Wireless Brand, Model and Wireless Chipset:
Code:
3 ) check interface:
Code:
4 ) Check for modules:
Code:
5 ) Kernel boot messages
Code:
View 5 Replies
View Related
May 19, 2010
I never had this problem with Ubuntu before and I am now confused. This is a clean install and I have not change anything about my AP so don't why this is happening.
Every 5min or so my wifi keeps disconnecting and sometimes have problems reconnecting. I also have Windows on this machine and it does not do this at all. My AP is set to channel 9(changing it makes no difference), WPA2. Logs below
Code:
[ 15.668746] alloc irq_desc for 33 on node -1
[ 15.668748] alloc kstat_irqs on node -1
[ 15.668768] iwlagn 0000:02:00.0: irq 33 for MSI/MSI-X
[ 15.696615] alloc irq_desc for 22 on node -1
[Code].....
View 9 Replies
View Related
Aug 13, 2010
I have recently purchased a cellular usb modem, a ZTE MF637. To my surprise and pleasure the device worked (almost) out of the box (almost, because I had to supply a user name and password to the wireless broadband connection properties).
Anyway, the problem is, that the connection work fine, but only for 20 minutes or so (I did not actually measure it), then I experience 0 network activity, and shortly after that the connection drops, and the device is no longer recognized as wireless broadband.
What I do is remove the device, replug it, and after a minute it reconnects. until the next drop.
I'm using Lucid on an Asus eee 1101HA.
Oh, one more thing, in lsusb, the device is listed as MF636, but the box reads MF637. I don't know if it matters, but there it is.
View 1 Replies
View Related
Nov 8, 2010
I have always had trouble in the past getting wireless adapters and what not to start working on Ubuntu but with each 6-month upgrade most problems are fixed while new ones are made. Since Ubuntu 10.10 just came out I thought I'd give it a go and test it with my hardware.
Before 10.10 Ubuntu could not connect with my wireless device and I had to do many things with gedit and such to get it working. After I have upgraded to 10.10 Ubuntu now recognizes my wireless device and network and I can search the web...but wait here it comes.
Literally minutes after a fresh install and first connection to my network my wireless signal will drop and prompt me to reconnect. Of course the first thing comes to mind I reconnect which doesn't work so I unplug the device and replug it making it works...Two minutes later my connection drops again and so I so reboot, and if you really want to know what happens next just restart this paragraph.
Things you need to know Operating System - Ubuntu 10.10 64-Bit Wireless Adapter - Hawking HWUN3 Hi-Gain Wireless-N Network USB Adapter Router - Apple Airport (99% sure it has all updates)
View 8 Replies
View Related
Apr 21, 2011
When you access the VPN service gives this error below.
daemon.log
Code:
View 1 Replies
View Related
Apr 28, 2011
i installed ubuntu 10.10 remix netbook edition on hp mini 110 last day. my wifi is working fine its connecting every network only problem is it cant keep its connection constant, i mean it keep disconnecting frequently. once it disconnect i tried to connect again but it connects but i can not surf internet.
View 1 Replies
View Related
Jan 16, 2010
I have a Toshiba Satellite M55-S325 (as it came from the factory, no mods), a Linksys WRT54G router, and Ubuntu 9.10/Karmic with all updates. I've had issues since I upgraded from 9.04/Jaunty to 9.10/Karmic. It did work for awhile (I think a few days), but then it suddenly just couldn't find our wireless network. I reformatted (with 9.10) thinking it had just been a bad install - now I can connect to our network, but it throws me off every two minutes. My roommate (Dell laptop, Vista) has no problems with the internet, and I've visited a friend (in another state) and used her wireless internet without issues (though I couldn't tell you which router they were using). I've gone into our router's settings (with both my laptop and my roommate's) to reset the router or change the security settings, but with no real progress.
Here is my ifconfig results:
Code:
eth0 Link encap:Ethernet HWaddr 00:0f:b0:87:b3:80
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
[Code].....
View 1 Replies
View Related
Feb 13, 2010
I recently did a clean install on my ASPIRE 5490G laptop with 9.10x64 and am having some odd problems with wireless.
The wireless will suddenly drop and ask me for re-authentication of the encryption key which I put in. Then it will ask me again. It will then refuse to connect to the router.
If I hit cancel then on the notification area the nm-applet will not have the router listed in the wireless networks .
If I kill the nm-applet and restart it with ALT-F2 and run nm-applet --sm-disable it still does not show the networks available.
I know it is not the router as my flatmate who I share with uses a laptop with Windows 7 and they have no problems.
View 1 Replies
View Related
Mar 7, 2010
I'm currently using putty on my laptop to control my headless server (both Ubuntu 8.04.) I'm running an rsync job that ran all night long and still going all day today so far. I need to restart my laptop, but if I do, I'll break the SSH connection. If I SSH back in, I won't see the same thing (rsync is showing me each file it's copying) that I'm seeing now. (At least I think that's true. Please correct me if I'm wrong.)
So I guess my questions are..Is there some way to restore my SSH session when reconnecting? (So I can resume seeing which file is being copied and - more importantly - when the rsync job (finally) finishes?If not, how else can I know when the rsync job finishes?
View 8 Replies
View Related
Mar 17, 2010
I updated Kubuntu from 8.10 to 9.04. After the update, I saw a problem with VPN connections. I am using an mac pro with 2 ethernet ports. Only one of them is connected to switch. I am using a static IP in my local network. The problem is that I lose dns information after connecting and disconnecting to a VPN by KVpns.As I am using static ip, I entered my dns server to resolv.conf file with "nameserver 192.168.128.4". My interfaces file is as follows:
auto lo
iface lo inet loopback
address 127.0.0.1
[code]....
View 1 Replies
View Related