Networking :: Unable To Ping Host From OpenVPN Client After Port 22 Denied
Mar 28, 2010After I applied below iptables rule.. I am unable to ping the host in 172.16.1.0/24 from OpenVPN client
View 1 Replies
ADVERTISEMENT
Networking :: OpenVPN - Can't Ping From Server To Client Side Hosts / Make It Possible?
Mar 20, 2009Code...
What I can ping
Host A -> Host B
Host B -> Host A
Host A -> Router B
Host B -> Router A
Host A -> OpenVPN B
Host B -> OpenVPN A
VPN Server -> VPN Client
VPN Client -> VPN Server
What I can't ping
VPN Server to any client side host local address
VPN Client to any server side host local address
I have searched and searched for this but can not find any answers. Why can I not ping Host B from my OpenVPN server?
Ubuntu Networking :: NX Client - Ssh: Connect To Host Port 22: Connection?
Jul 29, 2010I have a Windows machine on which NX Client has been installed. I wanted to test if I could access my Ubuntu box. The Ubuntu Box has NX Server, Node and Client installed. When I try to log in from the Windows machine using NX Client with my Ubuntu username and password I get an error connection refused.
The following service is running: OpenBSD Secure Shell server sshd How can I resolve the issue?
Ubuntu Servers :: Openvpn Routing / Cant Ping Vpn Client From LAN
May 2, 2010I am playing with openvpn, and I got stuck.I am using ubuntu server for openvpn server, which has 2 physical NICs, one is directly on internet and other is LAN, where few pcs are connected on.
View 5 Replies View RelatedFedora Networking :: F13 Unable To Ping External Host From Behind Proxy
Aug 17, 2010I can ping a host on my LAN successfully, but I cannot ping [URL]... for example. I have disabled the firewall and set http_proxy and can browse the internet with "Use system proxy settings" checked in Firefox. I am unable to update with yum either, but I am not sure if this is a side effect or not. I have run a trace on my ip address as I am browsing the internet and I can see the sites I am visiting on our web appliance. However, if I try to ping or update no requests are hitting the proxy so I don't think that is the issue.
View 6 Replies View RelatedFedora Networking :: VM Can Ping Host And Internet But Host Can't Ping VM
Jan 19, 2010Host - Fedora 12 64bit
KVM
VM - Windows Server 2008 64 bit
bridge-utils
VM can ping host and Internet but host can't ping VM.
I set VM static IP 192.168.0.205.
It turns out dynamic IP - 192.168.0.55
On host:
Networking :: Debian 5 - After SysCp Installation And Configure Ping Valure - Ping - Unknown Host
Jul 9, 2010Ive got a problem on my server ....installed Debian 5 , Webmin and than syscp settung up syscp ready ....
I try to ping "localhost" ansver ping: unknown host
I try to ping "localhost." there is a host with IP 127.0.0.1
I need it to change it in "localhost"
Is that the bind9 maybe?
Ubuntu Servers :: Openvpn Site-to-Site : Impossibile To Ping Client On Subnet?
Jun 25, 2010I have to ubuntu machine (9.10 and 10.4) with a openvpn tunnel between them.This is the situation:
Code:
NetworkA 192.168.0.0/24
|
UbuntuA br0:192.168.0.3 (openvpn bridge between eth0 and tap0)[code].....
UbuntuA has one only interface etho and there are two openvpn instance: one bridge istance with br0 and another instance with tun0.
UbuntuA is not the gateway for networkA. UbuntuB is the gateway for NetworkB.I need to comunicate between pc on networkB e those on networkA.This is the "ping situation" (no pc tested has an active firewall):
ubuntuA vs ubuntuB: OK
ubuntuB vs ubuntuA: OK
pc on NetworkA vs ubuntuA and ubuntuB: OK[code].....
CentOS 5 Networking :: Error: Unable To Connect To Remote Host: Connection Refused, It Happens With Any Port
Feb 11, 2009I'm trying to connect with my server via telnet, but when i sent the command (telnet xxx.xxx.xxx.xxx Port) doesn't works and shows then follow error: Unable to connect to remote host: Connection refused, It happens with any port. Is strange but my telnet services works (telnet xxx.xxx.xxx.xxx), In addition, i tried with firewall enabled and disabled and the problem still happens. My centOS run on virtualbox.
View 3 Replies View RelatedUbuntu Security :: Unable To Ssh To Client When It Is Running Openvpn?
Apr 21, 2010I have a virtual private server running ubuntu server edition that I have set up as an openvpn client. The problem I have is that the moment I turn on openvpn, I am no longer able to ssh into the machine. Is there a way to enable me to connect to it even when it is tunneling?
View 4 Replies View RelatedFedora Networking :: Connect The Network Where The Openvpn Client Is,throught The Computer With The Client To The Other Network?
May 20, 2009I have the following problem:I have to networks in remote places.I have an opnvpn client in one network that connects to the the router (openvpn server).My question is,can i connect the network where the openvpn client is,throught the computer with the client to the other network.If yes,how? (please make it an idiot proof anwser because i have limited knowledge about iptables). I was thinking like forwarding (the router in the network with the openvpn client is also firewalling with iptables) the request of the ip class of the openvpn network to the computer with the client,which masquarades the interface
View 2 Replies View RelatedGeneral :: Unable To Ping - REHL Client / Server
Jul 12, 2010I have two linux machines (machine1(rhel client) and machine2 (rhel server)). I am able to login the machine2 from machine1 but I am unable to ping machine1 from machine2. Firewall is stopped in both machine.
View 6 Replies View RelatedNetworking :: OpenVPN Openssl And OCSP To Make Sure Revoked Certificates Are Denied
Apr 6, 2010I have openVPN working with a thirdparty CA, and validating UID entries from the client certificates in LDAP groups. My next step is to figure out OCSP to make sure revoked certificates are denied. I could dump out my CRL as a nightly job, but that of course presents a window where a revoked certificate is still valid. how to dump out client certificate back to pem format? For the ldap check all i was using was the DN, which doesn't really help me for openssl/ocsp
View 5 Replies View RelatedNetworking :: Routing Vs OpenVPN Vs VMware - Host Only
Apr 4, 2010My special networking configuration.
The case: I'm running two dedicated Linux servers (openSUSE). Both servers are connected through public IP addresses to the internet. Each server hosts a VMware with another Linux inside.
SRV1 and SRV2 are the entry points for OpenVPN from external clients. SRV1 and SRV2 are although connected through an OpenVPN connection for save data sharing.
My problems:
SRV3 can't connect to SRV2 and SRV4.
SRV4 can't connect to SRV1 and SRV3.
External OpenVPN clients connected to SRV1 can't reach SRV2 and SRV4.
External OpenVPN clients connected to SRV2 can't reach SRV1 and SRV3.
Here are my configurations:
Code:
Code:
Code:
Code:
Ubuntu Networking :: Unable To Ping Over Wireless But Can Ping Over Wired?
Jul 24, 2010I have two machines on this network, one running Ubuntu and the other running Fedora.
When I'm using the Wireless network on the Ubuntu machine, I cannot ping the Fedora machine. Everything else works. I can browse the net fine.
If I switch over to the Wired Network then I can ping the other machine.
I don't understand why ping doesn't work only over the Wireless. I can ping the router so I'm guessing it's getting blocked by the router but I didn't block ICMP traffic.
I tried asking on IRC and they ran out of ideas too to find out where the problem is.
Fedora Networking :: OpenVPN Client Disconnects Me From LAN / Fix It?
Sep 15, 2009This is the first one of probably many posts as I am new to Fedora having lots of questions. This one is about the openvpn client which is used by me to connect to my company network. Thanks to the Fedora FAQ it was easy for me to set up the client and establish a connection. There is just one problem every time I open a connection I am disconnected from my local Internet. I was using openvpn on my Windows XP PC before and there was no problem keeping two Network connections, the (W)LAN and the vpn tunnel. Does anyone know how to solve this? I am utilizing the latest Fedora 11 release and configured openvpn client via the Network Manager GUI.
View 2 Replies View RelatedUbuntu Networking :: OpenVPN Client Not Setting Up?
Oct 1, 2010I am trying to connect to an existing VPN server that I have been using for years now. I am moving my develpment environment over to a Ubuntu box and I must have openvpn working in order to access SVN. It has been a few years since I have been setting up linux boxes. And networking is a soft spot for me. But
The server has been running without problem for a LONG time. A windows computer I have been using connects to it fine and I can access the network on this machine. I am setting up a new computer, but when trying to connect openvpn starts the initialization sequence completes but I cannot ping the network I am trying to connect to.
I use a second VPN connection to connect to an alternative network and it works fine. The difference between these two is that the working vpn connection is a routed IP tunnel and the one that is not working is a bridged connection.
The VPN that is working on this box brings up tun0 while the bridged connection connects but does not bring up a network tun device. The server logs look normal, it just looks like the client is not setting itself up to use the network once connected. (The key/cert pair work find when on a windows box) Just not on this new ubuntu build.
My current client config
Quote:
cert eric@home.crt
key eric@home.key
client
dev tap
[Code]....
The server is using tap, as well as the working windows client uses "dev tap"
It has been a long time since I have been maintaining linux boxes but its coming back slowly.
Do I have to bring a device up manually ?
Networking :: Openvpn Client Not Showing Up In Arp Table?
Mar 3, 2010I have a ubuntu 9.10 box that is acting as my firewall. ETH0 is connected to a cable router and my eth1 nats out it. I have br0 bridged to eth1 (private). I am able to ping from my openvpn client into my network but not from a boxon my local network to the openvpn client I watched the firewall and nothing is being blocked on any device. I checked the arp table on my firewall and it does not know about my vpn clients. Any idea's why my vpn clients are not adding themselves to the arp table?
View 2 Replies View RelatedNetworking :: OpenVPN - Establish VPN Between A Client And Server On The Same LAN
Feb 4, 2010Running Linux Fedora 10 on an Intel Core 2 Duo PC. Runs great. We are trying establish VPN between a client and server on the same LAN. The network is a standard fast ethernet, run great. We are trying to install OpenVPN server, but having a little difficulty. Key and certificate builds seem to execute without a problem. But when we try to start the service we get [FAILED]. I've attached a copy of our procedure.
View 1 Replies View RelatedFedora Networking :: Ping: Sendto Permission Denied
Jul 22, 2010I run a small home network with a wireless network using Apple airport wireless router. I have two macs and one Linux box (Fedora 13). Everything worked until about a week ago. Now the two macs can communicate with each other, and one of the macs can communicate with the Linux box, but the other can't, which is a bummer because it is a print server.
Pinging from the mac to the linux box gives the error message:
ping: sendto permission denied
Ping from the Linux box to the mac just hangs:
[/home/pjs] # ping 10.0.1.5
PING 10.0.1.5 (10.0.1.5) 56(84) bytes of data.
Firewalls on both boxes have been disabled. The Mac was running Little Snitch, but it has been uninstalled.
I have looked for messages from /var/log/message using tail -f and there are none when I ping either way.
ifconfig and /etc hosts, hosts.allow and hosts.deny look normal.
Fedora Networking :: OpenVPN Configuration - Destination Host Unreachable
Mar 6, 2010I have a problem with the Fedora 12 Network Manager - OpenVPN configuration. If I use the same configuration and manually start openvpn (as client) I get connected to the OpenVPN server and I can ping the network that I am accessing. With Network Manager - I get connected but when I try to ping is giving me "Destination host unreachable". The routing table looks similar except that when connecting with network manager is giving me on more route in table
Destination Gateway Genmask Flags Metric Ref Use Iface
xxx.xxx.xxx.xxx 192.168.0.1 255.255.255.255 UGH 0 0 0 wlan0
192.168.0.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0
192.168.171.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0
0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 wlan0
Where xxx.xxx.xxx.xxx is the IP of the OpenVPN server. When connecting "manually" I this routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.0.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0
192.168.171.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0
0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 wlan0
What I do wrong in Network Manager? If I try to delete the route with xxx.xxx.xxx.xxx is disconnecting the vpn connection.
Networking :: Host Can't Ping VM?
Jan 19, 2010Host - Fedora 12 64bit
KVM
VM - Windows Server 2008 64 bit
bridge-utils
VM can ping host and Internet but host can't ping VM.
I set VM static IP 192.168.0.205.
It turns out dynamic IP - 192.168.0.55
On host:
$ ping -c3 192.168.0.55
fails
Ubuntu Networking :: OpenVPN Server And Client At Same Time?
Oct 26, 2010I have an Ubuntu server that is currently running Ubuntu 8.10. I was thinking of making it a VPN server for my iPhone and also for my laptop whenever I'm outside and need to access internet over insecure wireless networks. Now that part should be easy I found several guides on how to configure OpenVPN server, as well as enabling clients on iPhone, and OSX.
However, the things is that my server is currently a OpenVPN client also, I have a paid tunnel set up to bypass my ISP blocking incoming traffic on various ports. Is it possible to keep this setting but still enabling a VPN server? Essentially causing traffic from my external device to go in through my tunnel to the VPN server, and then out through the external VPN provider.
Networking :: Get Bandwidth Speed Info Between OpenVPN AS And Its Client?
Mar 11, 2010is there any tools that I can use to get bandwidth speed info between OpenVPN AS and its client?
View 3 Replies View RelatedFedora Networking :: OpenVPN And Remote Port Forwarding
Feb 10, 2009I've recently installed OpenVPN on my dedicated server (Fedora) in order to have full internet access for all of my WinXP clients. In case somebody is interested in the details of the OpenVPN installation, I followed this documentation: Rootserver-as-OpenVPN-Gateway. The installation runs quire nicely, I'm able to surf the net and even file-sharing programs work on the XP clients - at least to some extent. There is a slight problem though: the file-sharing programs complain that they have a "NAT problem" or that they are "Firewalled".
Most likely, this problem can be addressed by configuring remote port forwarding (RPF) on the server. The only routing rules which I've added on the server during the OpenVPN installation are these:
Code:
# initialize natting for openvpn
iptables -t nat -F POSTROUTING
echo 1 > /proc/sys/net/ipv4/ip_forward
iptables -t nat -A POSTROUTING -o eth0 -s 10.66.66.0/24 -j MASQUERADE
Let's assume a certain application on a client is listening on e.g. port 1234. How do I configure RPF for this port on the server side.
Ubuntu Networking :: Can't Open OpenVPN Port 1194?
Nov 17, 2010So, I've installed and configured OpenVPN on Ubuntu server 10.04, but I can't connect to it. When i try connecting from another ubuntu machine it's "connection attempt timed out" and i can't seem to fix it. I think the problem is that port 1194 (which i've configured openvpn to use) isn't open. I've created iptables rules,Here are the rules:
Code:
sudo iptables -L -nv
Chain INPUT (policy ACCEPT 1033K packets, 58M bytes)
[code]....
Fedora Networking :: OpenVPN Client - How To Access Internal Ressources
Sep 26, 2009I'm using Fedora Core 11 and the client OpenVPN on the network-manager into a segmented infrastructure. It works well.
My laptop is on a dmz wireless Zone 192.168.3.0/24 and access Internet through a firewall via a front-end zone 192.168.65.0/24 with wlan0 interface.
But my laptop can access on a back-end zone 192.168.2.0.24 to a server.
When I start the OpenVPN tunnel, I cannot access on my back-end zone because the kernel routing table is modified (all the traffic is routed through the tun vpn interface)
If I define a static route like route add -host 192.168.2.x gw 192.168.3.2 where x is my file serveur, I cannot connect to this server because the routing is make through the tun interface and not by the wlan0 who can access on is gateway
I want to know where changing the kernel routing table file to access on the Internet and on my back-end zone in a same time.
Ubuntu Networking :: 9.10 - OpenVPN Client Fails (Error Status 7)
Jan 9, 2010I have openvpn server configured with bridged interface on my openwrt router. The client is running ubuntu 9.10 with config:
Client
dev tap
proto udp
remote x.x.x.x 1194
resolv-retry infinite
nobind
persist-key
persist-tun
ca /home/blwegrzyn/openvpn/ca.crt
cert /home/blwegrzyn/openvpn/client1.crt
key /home/blwegrzyn/openvpn/client1.key
comp-lzo
verb 5
(x.x.x.x was hidden)
When the client connects the log says:
WRRRWRSat Jan 9 20:16:03 2010 us=332404 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway,dhcp-option DNS 192.168.1.241,route-gateway 192.168.1.254,ping 10,ping-restart 120' .....
Sat Jan 9 20:16:03 2010 us=343906 ERROR: Linux route add command failed: external program exited with error status: 7
The server is trying to push default gateway 192.168.1.254 to the client and the client is on 192.168.2.0 network as you can see the route addition fails with SIOCADDRT: No such process. This is because the tap interface does not have any ip and the route addition is not possible. The tap interface is not getting the dhcp address through the tunnel, not sure why (this works on XP). To fix the problem I must manually add the ip to the tap interface, and the default gateway, but then i must add dhcp server to resolv.conf to make it work and once I disconnect the computer does not know the old valid dhcp anymore and cannot communicate. Why openvpn cannot get the ip automatically? Why it cannot grab the dhcp from the tunnel? Is it related to the wireless card being managed by the network manager? This works perfect on windows machine (xp sp3).
Ubuntu Networking :: OpenVPN Client No Buffer Space Available (code=105)?
Jan 26, 2010I'm using OpenVPN 2.1 on Ubuntu 8.10 to connect to LAN behind an IPCOP server. Everything works fine except when I move across the tunnel files which are over 180kb, then I get UDPv4 []: No buffer space available (code=105 surfing the Internet I've found post that suggest to increase these settings on the kernel
> sysctl -w net.core.rmem-max=8388608
> sysctl -w net.core.wmem-max=8388608
> sysctl -w net.core.rmem-default=65536
> sysctl -w net.core.wmem-default=65536
those have actually made a small difference, but not enough for uploading even an image over http. I guess that I can keep increasing those values till I'm not satisfied, but as I'm not sure on what I am dealing with, can anyone tell me if there's a rule of thumb? My machine is a laptop with a dual core processor and 2GB ram.
Networking :: Login Multiple Client Pc On Using Via Openvpn Server From That Side?
Nov 24, 2010How to login multiple client pc on the same network using via openvpn server from client side
View 1 Replies View Related