Fedora Networking :: Cannot Configure New Networks?
Sep 4, 2011
Using Fedora 15 with Gnome 3 I am unable to configure a new network connection as the configure button is greyed out.I use a network without DHCP thus auto-connect is useless and I must enter the network configuration myself. This was simple to do in Gnome 2.x but is impossible in Gnome 3 as the configure button is greyed out when your not 'connected' to the network. Also when the auto-connect fails it switches the NIC 'off'.How am I meant to connect to a network requiring manual configuration when I can only configure networks I am already connected to?FYI: I have edited the configuration of other networks which do utilise DHCP but only after the initial connection was established by DHCP.
View 4 Replies
ADVERTISEMENT
Jul 27, 2010
I just switched from Ubuntu to Fedora 13 because I was unable to get Ubuntu to connect to wireless networks. I tried everything suggested in help and forums, and kept getting "Bad Password" with WICD and Network Manager. Now, with Fedora...I still can't connect.
Problem #1: The guide says to "...make sure that the relevant wireless interface (usually eth0 or eth1) is controlled by NetworkManager," and that I do this via: System>Administration>Network
However, there is no Network option under System>Administration.
Problem #2: I open Network Manager, which displays a list of networks. I click on mine, configure it with WPA and the right password, and it fails to connect: "The network connection has been disconnected."
View 12 Replies
View Related
Oct 27, 2010
I want my netbook to connect automatically to both the office wired/static network and to the usual wired/DHCP networks.
wicd is wicked but netsearching hasn't revealed how to configure it for both wired/static and wired/DHCP except by manually switching profiles.
wicd's profiles can use pre/post(dis)connect scripts but I don't know how to integrate them into wicd when they are upping/downing connections on cable (un)plugging.
If it is not practical to solve this within wicd, I'll explore standalone scripts to configure eth0 on cable (un)plugging, as detected by ifplugd.
View 2 Replies
View Related
Apr 16, 2011
I am trying to configure my android phone (rooted Eris running kaossfroyo 2.2) to be used as a midi controller. Which I am having enough trouble with as it is but it has raised an annoying issue that occurred a month ago when I used the phones tethering network with my laptop. After connecting the laptop to the phones network (either tether, or an Ad-hoc network created using the network manager) I am unable to switch to other networks. In other words when I'm done with the phone-laptop connection I cannot connect my laptop to my home network! When I click on the other network connection I can see that it is attempting to connect in the upper right corner of the desktop (the network icon) but it will not make the connection.
What happens is that the network indicator will make the little circle graphic as if it is trying to connect but it never will display the other circle as green indicating that it has connected. but when I disconnect from the home network that is not connecting I will get a message underneath that will say that ad-hoc network disconnected! If I am switching from the android tether it will say Android-Tether disconnected etc. Even though when I click on network manager it shows that I am attempting to connect to the home network (labeled LIBERTY in my case) upon disconnection it shows the ad-hoc or tether connection being disconnected.
I am absolutely baffled by this! The issue persists even after deleting the ad-hoc connection from the wireless settings tab!!! I would speculate that for some reason the laptop is attempting to connect to the previous ad-hoc connection despite me wanting it to connect to LIBERTY. I am very confused and hope someone can lead me in the right direction.
View 1 Replies
View Related
Feb 6, 2009
abit new to fedora 9, the installation went ok but now i cannot get access to my network.what happens is that i can click on the wireless icon on the desktop but then i'm not allow to click on my network. there is an edit function available but not sure how to use it.
View 1 Replies
View Related
Aug 10, 2009
using a text interface for my computing but I have run into an issue. Does anyone know of a CLI networking tool that will allow me to connect to a non-broadcasting network? I have tried cnetworkmanager and attempted wpa_cli. The first does not seem to support it and I have not played too terribly much with the second. I have discovered that when I boot my comps into KDE and tell NetworkManager to connect to the network cnetworkmanager can find it then, but that does me no good for what I want, which is to boot my computers straight to runlevel 3 and get connected. If it means anything I am running F11 on a Dell Inspiron 1521 Laptop with a Broadcom wireless card (awfully annoying to set up, but it is working fine) as well as F11 on a desktop of my own designing with a Netgear wireless adapter.
P.S. I realize that broadcasting the network would be the trivial solution but alas I am not the admin on the router and he is out of town.
View 6 Replies
View Related
Aug 10, 2009
I have a broadcom 4322 with the broadcom-wl driver on Fedora 11. It worked the first time I used it, and since then is unable to detect any networks. I've tried reinstalling the driver, and it still does not work. Any suggestions?
View 2 Replies
View Related
Jul 24, 2009
Fedora 10 (dual boot w/ XP) on Dell Optiplex with a Dell wirelessntennaI am on a university campus with campus-wide wifi network (so no router). I have a wireless HP printer that I want to be able to print to using an ad-hoc connection. The wireless antenna, networking, and wireless printing are all working in Windows XP (so hardware is OK). However, on the linux side, the wifi is really really finicky.
When I first boot up to fedora, it usually connects no problem to the campus-wide wifi network. If I try to switch to the ad-hoc printer network (which it sees), will not connect and, furthermore, it will no longer connect to the campus-wide network (and sometimes it doesn't "see" this network at all). It seems that restarting the Network Manager service sometimes helps to reconnect to the campus-wide network, but not always and I can't connect to the ad-hoc regardlessNOTE: I'm just barely a linux user, and I didn't set up my system - don't assume that I did anything that would be common sense and, if you can, walk me through your suggestions.
View 6 Replies
View Related
Aug 28, 2010
I am just trying Fedora from a USB flash drive on my Toshiba Portege t110 netbook. But it does not seem to detect any wireless networks (although I definitely have a few available -- when I boot up with Win7 it can detect them without issues). I don't know if something is wrong or there are some special steps I need to do to get wireless networks working in Fedora...
View 3 Replies
View Related
Nov 7, 2010
This morning I installed Fedora 14 on my laptop. During the setup, I was able to configure the wireless connection and use it to install additional software from the FreshRPMs and Livna repos. When the install was completed, I was surprised to find the wireless not working. When I click on the NetworkManager icon at the bottom right corner, I see "Wireless Networks" Under that it says "device not ready" and it is greyed out so it cannot be click on.
Running lspci -vnn returned
07:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
Kernel driver in use: ath5k
Kernel modules: ath5k
Running lsmod confirmed that ath5k is in fact loaded.
View 4 Replies
View Related
Nov 29, 2010
Basically, I just installed Fedora in my desktop (use it on my laptop), and have a big problem, which is that Fedora (13), detects my wireless card (Edimax nMAX EW-7728IN), but when I try to connect to my wireless networks (WEP & WPA) it hangs and asks again for the password. I know the problem isn't from my routers,since I'm right now connected via Fedora 13 in my laptop.
View 4 Replies
View Related
May 23, 2011
In all but one place my HP Pavilion laptop running Fedora 14 will work flawlessly to use the Internet for e-mail, ftp, http, etc. In one network there is a wireless router - Cisco/Linksys E3000 - that allows every computer to use the Internet normally for wireless or for wired connections, every computer but mine. If I use Google's Chrome I can access the Internet. I can ping any web site too, but the moment I try to access anything with Firefox 3.6.17 there is a long delay and the standard error page appears. Weather or not I use a wired connection is apparently irrelevant.The Windows 7 computers in the same network are free of this curious problem. Strangely I have noted a problem like this, possibly the same problem, with another network at a coffee shop and they both share the misfortune of using AT&T, which is proud to not support Linux ... for customers of course (it's good enough for themselves I'm sure)
View 3 Replies
View Related
Jan 7, 2010
I could use Wireless network. I could see several different networks in my range. Then suddenly the network stoppedworking, and I can no longer see any networks under "Wireless networks".The Wired networks works fine.I tried upgrading ubuntu, but nothing changed. Just to confirm, I rebooted the computer in Windows Vista (Dual boot) andconfirmed that Wireless worked fine there. No hardware problem then.The suggestions I have found on this and other forums suggest looking at the output from iwconfig and ifconfig. But since I'm a n00b at Ubuntu I don't know what to make of it.
This is the output:
emil@emils:~$ iwconfig
lo no wireless extensions.
[code]...
View 1 Replies
View Related
Jan 27, 2010
does it still support the madwifi driver. i have tried to compile madwifi 0.94 that i got from svn and from sourceforge and it was succes, but the problem is it doesnt work. when i compile the source from subversion, i get the ath0 on iwconfig command but i can't get any wireless network on list of network. if i use the one from sourceforge, the iwconfig list even doesnt contain any ath*
View 3 Replies
View Related
Aug 6, 2010
I know Windows forward and backward but I am so new to linux it's just wrong. I just installed fedora (like 1hr ago) on and old toshiba laptop with a WiFi PC card. Everything seems to work fine except. My Networks connects to my home Wifi network but it will not connect to internet. When it connects the IP address isn't even close to being in the same range as my other laptops and PCs. Like I said I'm new to linux but I'm wanting to learn. Any fixes for this issue? Which linus book is the best one to read for a beginner? Other then not connecting to internet I have no complaints.
View 14 Replies
View Related
Sep 21, 2009
I have Lucent Technologies Orinoco Silver 11 Mbps PCMCIA wifi card. It worked perfectly in Fedora 10, but after updating to Fedora 11 it stopped finding any wireless networks. The updating were done with automatic updating utility. The card works perfectly in Windows, I tested it today.
My laptop is HP nx6110 if that matters.
Here is the situation:
When I plug-out the card, the Network Manager disables wireless networking as it should. When I plug-in the card, wireless networking is enabled, so the system seems to recognize the card in some way.
If I try to connect to "Hidden wireless network" (because there isn't any wireless networks listed in the Network Manager) system tries to connect for a couple of minutes, and then asks wireless settings again. Orinoco card's lights DOESN'T blink normally when connecting to the network (one light should blink rapidly and one should light continuously, but both are blinking rarely or doesn't blink at all).
In System->Administration->Network in tab Hardware (hope those names are correct, I use Finnish version of Fedora...) is:
It seems that the card is detected right.
Here is what I have done to get the problem solved: In System->Administration->Network I have tried to connect to the wireless network manually (disabling the Network Manager). I can't get the connection. It gives me random error messages, sometimes "Check the cable" or something like that, sometimes just timeouts IP determination.
I have tried to connect different wireless networks, no connection. All tested networks worked with another computer.
No matter if I reboot or service network restart or plug-out plug-in the card... the problem still appears.
Tried to find (and reinstall) drivers:
Code:
No Matches found
Code:
Here is the output of lspci. The output is the same if the wifi card is connected or not.
Code:
LAN connection is working just fine.
View 3 Replies
View Related
Oct 31, 2010
I'm running fedora 13 but I'm having issues with the wireless connection, I can see all the networks in the area but when I try to connect it does not seem to accept the wep key.Its a Belkin receiver, could do with a little help as this is such a pain. I'm using a pc.---------- Post added at 05:24 AM GMT ---------- Previous post was at 04:59 AM GMT ----------This maybe some use but I don't know much about it.
[Barry@localhost ~]$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:18:8B:90:19:01
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]...
View 7 Replies
View Related
Aug 12, 2009
host A: Fedora 7 has bind 9.4.2
host B: Fedora 11 has bind 9.6.1
I want to migrate my bind configuration from A to B I've read the release notes and man pages and I can't see why copying
/etc/named*
and
/var/named/*
I checked /etc/sysconfig/named too... Seems to have no effect on my brand new install on Fedora 11. Host B stays basically un-configured.
View 2 Replies
View Related
Dec 26, 2010
install telnet in fedora 14 then how to configure telnet?
View 13 Replies
View Related
May 3, 2011
can anyone tell me the difference between the linux ad-hoc connection and window ad-hoc connection .....is it possible to make ad-hoc connection in fedora 14
if it so. how to setup ad-hoc connection between two laptop.
View 1 Replies
View Related
Jun 11, 2009
I have configured a Fedora 10 server on a mixed Win / ix network but am unable to get DNS to resolve on my Fedora boxes.My DHCP is provided from a D-Link 108G Router - but this will not provide DNS.Therefore I have tried to configure dnsmask to provide just DNS and not DHCP. I can ping around my 192.168.1.x network by IP but not name
View 4 Replies
View Related
Dec 22, 2009
setting up samba! I am a frequent user of FreeBSD and Ubuntu. Those two automatically display the workgroups in my workplace when I use them after installing with no configuration at all. They just work out of the box! How can I configure samba in the same way in Fedora 12 so that I can access the workgroup shares at work? Fedora 12 works like a charm on my laptop. Ubuntu crashes every so often! That's why I am sticking to Fedora 12. My Workplace computers run FreeBSD
View 12 Replies
View Related
Apr 3, 2011
ran an internet cafe and last week my windows server got fried because of power surge. Now i got Fedora 14 running on another PC and i want to set it up as a full caching proxy server, so other computers can connect through it to the internet. I have 2 network cards inside.I'm really new to Linux and now learning my way around. I managed to install squid but don't know how to configure it to suit the purpose above
View 1 Replies
View Related
May 2, 2011
I have 3 machine each one is running ftp daemon(example), and have an application daemon which is monitoring load and can communicate with remaining servers. now for every new connection I can check load of each server and I want to redirect that socket connect request to least loaded server. that load balancer daemon should be able to do this at runtime without breaking any existing communication. This should work seamlessly with any application. How I can achieve it using any combination of Advance routing, VLAN, iptables LINUX.
View 5 Replies
View Related
Mar 5, 2010
I want to connect my pc to my laptop. I have fedora 12 installed in both system.How can I do this?
View 14 Replies
View Related
Dec 13, 2010
I'd like to know how to configure Fedora 14 so my VPN connects and reconnects itself automatically, since the "connect automatically" thing I checked in the network manager doesn't work.Is there a way to make sure that everything uses the VPN, so when for some reason the VPN is disconnected the applications will wait for the VPN to reconnect itself instead of switching to the regular network ?Also since it's pptp VPN I tried to disable Ipv6 but I don't know how to check if I successfully did it, can you guys give me the command line to check that ?
View 2 Replies
View Related
Feb 2, 2011
I have loaded Fedora 10 in my PC and have configured the network (wired and wireless [Netgear Wifi Adapter] both). But I am able to make the hostname resolution work. configure the system?. I have unsuccessfully tried a lot of things.
View 4 Replies
View Related
Jun 14, 2009
need help in configuring open vpn on fedora 7. plz send me good how tos for configuring openvpn on fedora 7.
View 1 Replies
View Related
Jun 15, 2009
Fresh install of FC11. Had to install libwvstreams-4.5.1-5.fc11.i586.rpm and wvdial-1.60-8.fc11.i586.rpm
Now get following error -
View 6 Replies
View Related
Nov 24, 2009
The problem is that he did not specify exactly where in /etc/profile. I am trying to make a custom spin of F12 but I cannot do it behind the proxy as it is now.
View 4 Replies
View Related
