abit new to fedora 9, the installation went ok but now i cannot get access to my network.what happens is that i can click on the wireless icon on the desktop but then i'm not allow to click on my network. there is an edit function available but not sure how to use it.
View 1 RepliesI have a freshly installed ubuntu 9.10 but I can't connect wirelessly. When I click on the network icon, there are no wireless networks available. (Disabled?) And I've tried maybe activating it, but my Hardware Drivers come up empty. wireless adapter
[code]...
I am just trying Fedora from a USB flash drive on my Toshiba Portege t110 netbook. But it does not seem to detect any wireless networks (although I definitely have a few available -- when I boot up with Win7 it can detect them without issues). I don't know if something is wrong or there are some special steps I need to do to get wireless networks working in Fedora...
View 3 Replies View RelatedThis morning I installed Fedora 14 on my laptop. During the setup, I was able to configure the wireless connection and use it to install additional software from the FreshRPMs and Livna repos. When the install was completed, I was surprised to find the wireless not working. When I click on the NetworkManager icon at the bottom right corner, I see "Wireless Networks" Under that it says "device not ready" and it is greyed out so it cannot be click on.
Running lspci -vnn returned
07:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
Kernel driver in use: ath5k
Kernel modules: ath5k
Running lsmod confirmed that ath5k is in fact loaded.
Basically, I just installed Fedora in my desktop (use it on my laptop), and have a big problem, which is that Fedora (13), detects my wireless card (Edimax nMAX EW-7728IN), but when I try to connect to my wireless networks (WEP & WPA) it hangs and asks again for the password. I know the problem isn't from my routers,since I'm right now connected via Fedora 13 in my laptop.
View 4 Replies View Relateddoes it still support the madwifi driver. i have tried to compile madwifi 0.94 that i got from svn and from sourceforge and it was succes, but the problem is it doesnt work. when i compile the source from subversion, i get the ath0 on iwconfig command but i can't get any wireless network on list of network. if i use the one from sourceforge, the iwconfig list even doesnt contain any ath*
View 3 Replies View RelatedI have two wifi routers. If I stand next to the main one with my laptop I can connect and access the internet no problem. The other router is in my office, and the bridging is messed up, so while I see the essid and bssid using 'iwlist scanning' and nm-tool, I can't connect to it.
Now, my main router's signal still reaches to my office, just not as strong as the borked router in my office. I need to be able to choose which wifi network to connect to without wasting time walking between rooms. I added entries for both in network-manager, but it doesn't show them in the list when I left click the tray icon! How the do I connect to the network I want?
I could use Wireless network. I could see several different networks in my range. Then suddenly the network stoppedworking, and I can no longer see any networks under "Wireless networks".The Wired networks works fine.I tried upgrading ubuntu, but nothing changed. Just to confirm, I rebooted the computer in Windows Vista (Dual boot) andconfirmed that Wireless worked fine there. No hardware problem then.The suggestions I have found on this and other forums suggest looking at the output from iwconfig and ifconfig. But since I'm a n00b at Ubuntu I don't know what to make of it.
This is the output:
emil@emils:~$ iwconfig
lo no wireless extensions.
[code]...
I've been running Karmic since it was officially released on my Dell Studio 17 (specs are in my signature) with a Broadcom wireless half mini wireless card.hen I installed Karmic, it gave me the option to install proprietary drivers for my video card as well as 2 Broadcom drivers, STA and one of the BC43 drivers. I installed all of these, and the only problems I had were with the audio. I spent a few days troubleshooting the audio and finally got PulseAudio set up for my card.
Almost 3 months later, I was making use of my wireless network at home, as I had done plenty of times over the previous 3 months, when I closed the lid (thus putting the computer into sleep mode) and took it to the hospital to stay with my fiancé¥ after her surgery. When I got to the hospital, I couldn't get their network to show up. Network Manager didn't even recognize the network. We had also brought my fianc饧s laptop (same machine with a slightly less powerful CPU and only 4 GB of RAM). She is running Windows 7, which detected the hospital's network with no problems.After trying to ad-hoc the hospital network with no success, I finally just gave up and played Sudoku and toyed with some graphics stuff in GIMP until we came home. Upon returning home, however, I was shocked that my card didn't even detect our home network.
I have been unsuccessful for the past 3 days in getting Network Manager to identify our wireless network. The wired network connects without issue and I am able to make use of a USB Belkin adapter, which identifies all 7 of the various wireless networks in my neighborhood, including our home network.While I would be able to simply carry my Belkin adapter with me in order to make use of wireless networks, I would really like to solve this problem with my Broadcom adapter. I've gone through the Ubuntu Wireless Network Troubleshooting guide, but I still can't get it to workOutput of lshw -C network:
Code:
*-network
description: Wireless interface
[code]...
For some reason, ubuntu cannot find local wireless networks. In fact, the Broadcom wireless card Ralink RT5390 802.11b/g/n seems to be incompatible with ubuntu. I've tried numerous 'solutions' on the Internet, but none of them seem to work on my computer. Tutorials I've visited have recommended downloading the b43 drivers from the Synaptic package manager and also the bcmwl-kernal-source package. Nevertheless, the wireless never turns on and Additional Drivers never shows anything at all. After several exasperating hours of trying to get my wireless running I've decided to turn to the forum for help. I'm sure there's probably more information I should supply, but I'm honestly not sure what that would be.
View 2 Replies View RelatedI just switched from Ubuntu to Fedora 13 because I was unable to get Ubuntu to connect to wireless networks. I tried everything suggested in help and forums, and kept getting "Bad Password" with WICD and Network Manager. Now, with Fedora...I still can't connect.
Problem #1: The guide says to "...make sure that the relevant wireless interface (usually eth0 or eth1) is controlled by NetworkManager," and that I do this via: System>Administration>Network
However, there is no Network option under System>Administration.
Problem #2: I open Network Manager, which displays a list of networks. I click on mine, configure it with WPA and the right password, and it fails to connect: "The network connection has been disconnected."
I'm running fedora 13 but I'm having issues with the wireless connection, I can see all the networks in the area but when I try to connect it does not seem to accept the wep key.Its a Belkin receiver, could do with a little help as this is such a pain. I'm using a pc.---------- Post added at 05:24 AM GMT ---------- Previous post was at 04:59 AM GMT ----------This maybe some use but I don't know much about it.
[Barry@localhost ~]$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:18:8B:90:19:01
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]...
I have just installed openSuse 11.4 KDE 64-bit on a Dell M1330. When I click on my networking panel, it says WLAN interface is unavailable. I've followed the steps in the stickied post and found the WLAN hardware info, a screenshot of which is below:Uploaded with ImageShack.usNext it says to do this - you need to look at the logs, in particular the info in /var/log/boot.msg. To see this, you need YaST => Miscellaneous => System Logs and select boot.msg.In YaST there is no such option for system logs under miscellaneous, so I can't do that. The results of the sudo /usr/sbin/iwlist scan command produce the following:
root's password:
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
[code]....
I have an Acer Aspire 3000 and just installed a Netgear WGR614ver9.I installed FreeSpire and it works great.{well except} I am online with Eth0 now. It says the wlan0 is working but it does not see any wireless network. I tried it at a couple of places other than here where I thought it should detect a wireless network but it did not. How can I determine if it is FreeSpire or the Wireless card at fault?
View 1 Replies View RelatedI have been having trouble getting my network card to access networks. I currently am using a wired connection. A while ago when I first installed Linux on this same computer, I got it working by installing the driver. But since I reinstalled Linux, I tried the process again with no success. Can anyone give me explicit instructions on installing the network card driver so I can use it on Linux.
View 1 Replies View RelatedI have Ubuntu 9.10 on VirtualBox.How can i view my wireless networks via 2 ways ?
1)via Terminal(Shell)
2)via a suitable apps in GUI.
I'm dual-booting Ubuntu 9.10 (upgraded from 9.04) and Windows 7 on my Dell Inspiron 1525 laptop.Ubuntu doesn't recognize any wireless network (both in 9.04 and 9.10); my Windows OS works perfectly well with wireless, as does my wired Internet connection with Ubuntu and Windows.I've had this problem on previous installations of Ubuntu (I've removed and re-installed it several times) but I can't locate the solution anywhere. I've tried numerous fixes that I've found online, but none of them have worked.System>Administration>Hardware Drivers tells me that the Broadcom STA Wireless driver is activated and currently in use
View 4 Replies View RelatedI am using a Toshiba Laptop model P205D-S7802 with an atheros wireless card. Since I upgraded to 10.04 I am unable to connect to the internet unless I use an ethernet cable. I have been surfing the threads for a fix and have tried what has been posted but to no avail.
HTML Code:
eth0 Link encap:Ethernet HWaddr 00:1b:38:b6:cb:98
inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::21b:38ff:feb6:cb98/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]...
I'm running Ubuntu 10.04 64bit on a Thinkpad T61, and I keep running into some issues with the wireless networks. For a while, the connection works fine (sometimes several hours, sometimes 15 minutes or so--there doesn't appear to be an event associated with it). Eventually, though, the connection disappears; first, though the widgets say I'm connected, nothing will go through, and soon after, it realizes I'm not connected and, moreover, it can't find a single wireless network, despite the fact that it was just fine a couple of minutes beforehand (and other devices still have access to the WLAN, so I know that the router hasn't crapped out). I've tried using wicd, but the same thing happens.
View 2 Replies View RelatedI am quite new to Ubuntu, so please give me easy to follow steps.So, I have just installed Ubuntu 10.10 x64, but cant get my wireless to work. It detects my networks and tries to connect to them - infinitely, whithout success.I have tried it on an unprotected and on a WPA2-personal protected network with the same results.My card is a RaLink rt3090.
View 7 Replies View RelatedI have a pretty beat-up laptop, on which the inbuilt wireless doesn't work, and so I now have an ASUS WL-167g, which is acting up!It almost always connects to the required networks without an issue, but then once I'm connected it's REALLY slow on some of them! For example, while I'm at school, it works flawlessly! And at a couple of friends' houses, it works too! however, at home, and at a couple of other places, despite the fact that it connects, its so slow, that google takes like 5 mins to load and searching for anything on google leads it to time out!! This happens whether I'm right next to the router (full signal strength) or 2 floors up (at like 3 bars strength)!
It's getting pretty frustrating to have to swap my lan cable between my desktop and laptop constantly, and also to not be able to use my laptop away from my desk!Does anyone know what might be going on??Also, while i have you guys here! I have another problem -- with the inbuilt card.. Initially, it wouldn't work at all.. but more recently, it has started to function (it connects and works on my home network fine) the only problem is that about 10 mins after I turn the wireless switch on on my laptop, it hangs! (EVERYTIME) (if it's relevant, my laptop is a SONY VAIO VGN-S46GP). Again, any input would be appreciated!!
I installed Lubuntu yesterday on an older Dell laptop and the installation went fine. The only thing not working after the installation was the wireless. After hours of searching, I was finally about to get it to recognize the wireless card, see wireless networks, and connect successfully by running these commands.code...
View 3 Replies View RelatedI have ubuntu 10.10, and at my house I primarily used wired, and it works fine, and under windows earlier today I was able to locate networks, so my wireless card is working. I'm currently at my girlfriends house, and trying to connect to her wireless internet. When I try to connect, I can't find any networks. I've made sure her network has sharing and discovery enabled, however in my wirelss manager it comes up as blank. There's the option to add wireless manually, but do I really need to go through the trouble of finding the routers mac address and all that, it should just show up?I could switch back to windows to see if I can connect, but I'm almost positive it's just the linux wireless manager..
View 4 Replies View RelatedI arrived in the Central African Republic only to find that my wireless (on an HP Mini 5102) wasn't working -- it didn't detect any wireless networks. So I wiped off Windows and installed Ubuntu 10.10, Luckily, it did! (Partly.) At first, I still didn't get any wireless networks. I messed around with all the various things you have to do to get Broadcom wireless drivers working. Finally, following a forum suggestion, I installed Wicd -- and this did the trick. Not knowing any better, I kept Network Manager alongside Wicd, but Wicd is what works much better. (Is there a reason to un-install Network Manager?)
However, when I try to connect wirelessly to the network at this country's one cafe with wifi (which usually works really well, by CAR standards), the network doesn't appear. At the office, when I open Wicd, it includes a box with the message "<connection name>: obtaining IP address", and bit by bit it connects. But when I open Wicd at the cafe, this doesn't happen -- it just gives me a list of random signals from nearby offices (all secured and low-signal), none of which I can connect to. Any ideas how I could get the cafe network to show up?I'm at the office now, and so it's working. However, in order to get it working I had to restart three times -- Wicd only seems to work about half or 33% of the time. Sometimes I get the message: "Connection failed: unable to get IP address" and sometimes I get the message "No wireless networks detected." Then I try again and eventually it works. So far.
I've tried every fix i could find. I'm on a Dell Inspiron 1420 running Ubuntu 10.10 lucid lynx using a BCM4312 LP-PHYi've tried everything to get my wireless networks to connect but nothing works. I finally got my computer to recognize my wireless card but it doesn't detect or connect to networks. Before i was able to at least see the networks but not connect or stay connected once i disconnected the ethernet cable. i will post the output of ifconfig, iwconfig, iwlist scan
View 3 Replies View RelatedI'm having trouble detecting wireless networks in range.
View 1 Replies View RelatedFirst time ever switching from windows. Mainly doing this cause I though it would be fun to learn a new OS and see how it is.From watching a few videos it looked like all I have to do is click on the wifi logo at the top of the screen and I would get my router and a bunch of others (does this on windows) but when I click on it I dont get anything. I think it might be that im running this on a laptop. My wifi card is: Standard Dell Wireless 1501 802.11 g/nIts a new dell inspiron 5000 laptop i customized a little with more ram and a new video card.
Im guessing I will need to provide more info but as I said at the start Im new to this and not sure how or what info I would need to provide. Please just tell me how I can get any data you need and il get right on it. (I used Wubi to install this, went off without a hitch)
I've used this computer to connect to a wireless router before. I recently moved and for some reason it isn't working.I have a too long of an lspci output to type (I'm on a different computer).
View 1 Replies View RelatedI cannot see any wireless networks after waking the computer from suspend. Wireless works fine on boot. I've tried restarting the network service, but I still don't see any available wireless networks.
[code]...
I have installed Ubunu 10.04, and after that i have installed the wireless driver from Hardware Drivers.
The problem is that no wireless networks are showing up and i cannot connect to my wireless router. Tried rebooting, but still nothing.