I'm a new user of fedora, and with installing the system, I don't get samba working.
I have make a smb.conf file :
[global]
workgroup = WORKGROUP
security = SHARE
usershare owner only = false
[magazijn]
comment = Alle Directories
path = /
valid users = marco
admin users = marco
write list = marco
read only = No
preserve case = Yes
locking = No
share modes = No .....
I have a small network at my home. I have two laptop with Linux , one with MAC and a Desktop with Windows and Linux. Also have a Network printer and a printer that is connected to the Desktop PC. I have to work with files that are on the Windows PC as also with the printer (because of colour). For what I have heard , Samba is the answer, but when I click on Samba or on Windows Network, I received a message telling there isn't anything there and I have 5 shared folders as well the printer.
View 4 Replies View Related I set up Samba using command line terminal, and my network does not work. I have Samba username and keyring passwords all set, then I go to gui system-config-samba, and my samba user profile password is incorrect. In the past, I have used a 10 letter password, however, every time I boot the computer, I have to go back in and re-enter the password.I wonder if samba is truncating the password because it only accepts an 8 character password? I have deleted the user, and added a new username, and it is still doing it.
If I go into the gui and re-enter the password, usually I can get the network back up with my windows machine. All of the parameters are correct, I use the network to transfer files from my Windows to my Fedora drive all of the time when it works.
I want to use samba for file sharing like on a Windows home network. Actually they are all Linux machines but nfs is too complicated. On my host machine I installed samba and system-config-samba. I created a new share for /home, check marked writable and visible and put access to everybody. For preferences-->server settings--> security the "authentication mode" is set to user, encrypt passwords is no, and guest account is no guest account. Under preferences-->samba users I added myself as a user with the same windows user name as my Linux user name and the same password.
My client is a virtualbox fedora (used for testing purposes but actual clients will be real computers on my home network). I entered the address smb://192.168.1.184. When asked for the user name and password I put my regular user name and password since that was what I set in samba users. However, the password dialog keeps coming up and won't let met into my own computer. If I quit it says something like access is denied. How can I get my home network back? I liked this feature when my home computers ran XP but I switched them to Fedora 12.
Just installed the new version of Ubuntu and having problems. My Dell Vostro works fine and the he Internet also works fine after giving the machine the router pass-phrase however the Windows 7 network showing but I cannot open it. the 2 daemons for Samba are running ok and I am just na bit stumped with this one.
View 1 Replies View RelatedI made a Ubuntu server and it is pretty cool. I had a windows computer that I could copy and paste files to and from over the network. What you did is just find it in My Network and the files were available there. How do I make Ubuntu or Samba act like that?
View 2 Replies View RelatedFirst off I would like to install a GUI for samba. After that I want to set up my network so that router stays as the server for the network I have four windows computers already hanging off of the router. This machine which has Slackware on it is hardwired, directly connected, to the router via cat-5 cables. I have samba installed already and I just need to configure it correctly.
View 4 Replies View RelatedI'm having some trouble getting samba to work properly. I'm following this tutorial [URL] when I run
Code: sudo smbclient -L localhost I receive the following: Code: Enter root's password: Anonymous login successful Domain=[SAMBA] OS=[Unix] Server=[Samba 3.4.7]
tree connect failed: NT_STATUS_END_OF_FILE I'm lost!
How do I make ntlmv2 and 128 bit encryption work with Samba. i.e. I have a Win 2008/Win7/Vista box with standard settings i.e. forced using ntlmv2 and 128 bit encryption that I want to connect to a Linux server running Samba (RHEL6 in this case). Now if you google you it says Samba should support ntlmv2 with settings like this:
lanman auth = no
ntlm auth = no
client lanman auth = no
client ntlmv2 auth = yes
However even with 128 bit encryption turned off on the Win box it still doesn't work. We use "security = server". Is it maybe a requirement that we need to use security domain instead for ntlmv2 to work? Reading further in man smb.conf.5 "client ntlmv2 auth = yes" is "This parameter determines whether or not smbclient will attempt to authenticate itself to servers using the NTLMv2 encrypted password response." so clearly it's not affecting our samba server.
Reading even further in man smb.conf.5 it says "If this option (lanman auth), and ntlm auth are both disabled, then only NTLMv2 logins will be permited". Why is it then that you need to force NTLM auth in Win2008?
NTLMv2 is only compatible with "security=domain". This means that even if you set "lanman auth=no", and "ntlm auth=no" it will still only auth with NTLM... Here is the Q from Andrew Bartlett * "Use 'security=domain'. NTLM2 session security is not compatible with 'security=server'."
In order to use "security=domain" you need to use the net command to join the windows domain and for that you will need the AD administrator account password which you will most likely not have. However the question still reminds if you would to join the domain would the NTLMv2 work over 128 bit encystations or would you need to disable that one still?
I am fairly new to Fedora or rather use it only for some school exercises I get. I have to setup a Samba server with some basic settings and it doesn't want to work. I first tried it on the Fedora VM I got from school (version 11). It somehow worked, but extremely bad ... the Windows client had to wait for over a minute to get either access or an errormessage, that the server was not found (but when entered the ip in the adressfield on top it worked (with a minute or more to wait)). I tried updating the VM - no improvement. So I decided to download Fedora 12, installed it and the Windows client gains instant access on first glance. But when I try to get access to a specific share, it only tells me, that I am not allowed to access it Oo.
Here is my config:
Code:
I even turned off iptables and Windows firewall.
The funny thing is: I tried exactly the same config on my homeserver (copy and paste), which runs Arch, and it works with no problem. But on Fedora I cant access it from nowhere. Not from WinXP, Win7 or any Linux. Simply won't work.
I dont have any gui on Fedora
In Windows, I'm used to just anyone being able to access my Network Places, and I just deny read/write access by allowing users to change my files. In Samba, I don't want to have users, I don't want prompts coming up asking for credentials. I just want to be able to share some folders allowing only list/read permissions, and other folders allowing read/write/insert/delete permissions.
So I'm guessing the way I want to do this in linux-talk is: Create a user Give them access to folders x y and z chmod folder x, y, and z appropriately Give them no user name and chroot them to some folder, and create symlinks to the folders I want them in.
Possibly making the samba server look as a UPnP device (since it can find my router as one, strangely enough) EDIT: Super-weird. So I uninstalled Samba and reinstalled it using the software centre, and when I looked to see if I can run samba via command line, it said it wasn't installed. So I'm apt-get installing samba4 now.
We recently upgraded our Samba server from Fedora 10 to Fedora 12. After the upgrade, when users connect to a Samba share from their Windows PCs, they can no longer see the symlinks in the share like they used to under Fedora 10.We are using the same smb.conf file as under Fedora 10, so I'm not sure what has changed.
View 2 Replies View RelatedI have update my linux server from mandriva 9 to mandriva 2010
I was working using samba 2.2.8 and now I have samba 3.5.3.I have transfer all passwd and smbpasswd to new linux.I have convert smbpasswd to tdbsam
when i am using win xp to logon on samba domain the windows XP does not load profiles from samba. I think that the problem is NTUSER.DAT storing in /home/user/profile
The same profile is working using samba 2.2.8 but not working in samba 3.5.3..
i want to configure samba on fedora 10. here are my settings in smb.conf
[global]
workgroup = MARVELSERVICES
server string = Samba Server Version %v
interfaces = eth0
[Code].....
I recently have just started using linux and downloaded Fedora 10 and I'm trying to figure out how to fileshare and print share with my windows vista machine.I edited the registry file on my Vista machine HKEY_ LOCAL_ MACHINESystemCurrentControlSetContro lLsaLMCompatibilityLevel and changed the level from 3 to 1.I've also gone through a lot of tutorials on editing the smb.conf file and set my workgroup name, netbios, and changed permissions on my linux machine (a Lenovo netbook) etc but thats about as far as I can get. This may sound like a dumb question but I can't even get samba to connect on my linux machine so how do I do that?
I was wondering if any of you guys can provide a solution as to how to connect or direct me to a good howto for setting up and using Samba seeing how I'm a noob.I've been on Samba.org already and I'm more confused than ever.
I just installed FC13.It wiped out everything from the previous (FC11) installation. I cannot connect to the existing windows network that was working before. I don't see SAMBA so I downloaded and installed the RPM. I still don't see it on any of the menus. I am trying to connect to the existing Windows network
View 6 Replies View Relatedi did yum install system-config-samba and it worked and installed when ever i click on it. it says it is starting up and then just crashes.
View 1 Replies View RelatedHas anyone written a GUI for SAMBA?
View 1 Replies View RelatedI've got a problem with samba and the nmb service. My system boots in Gnome
Ive set up Samba and it works ok, untill I reboot, then I have to go into services and restart Nmb service. the services bit says its dead after a reboot, its running on run levels 2345 I had a few hicups setting it up took me a couple of days to figure out the fire wall and SElinus were blocking things, so I ticked all the samba things - and it works a whole lot better.
I have to admit its a whole lot more polished than last time I tried linux - Red Hat 5. I like the Yum installer it takes a lot of guess work out for us novices, one thing I would like is to be able to edit and open things as root in Gnome or just log into it as root so that you can set things up, but I'll save that question for another day.
IM completly new to fedora but decided to give it a try after using ubuntu for a while,I have everything setup apart from sharing and im been fiddling for a while now.
View 1 Replies View RelatedI used samba on FedoraCore2 before...and now i cannot config the same on FC10. I cannot start the service smb ( /etc/init.d/smb restart or service smb restart ) those commands dont work. How can i do to config samba service.
View 11 Replies View Relatedsetting up samba! I am a frequent user of FreeBSD and Ubuntu. Those two automatically display the workgroups in my workplace when I use them after installing with no configuration at all. They just work out of the box! How can I configure samba in the same way in Fedora 12 so that I can access the workgroup shares at work? Fedora 12 works like a charm on my laptop. Ubuntu crashes every so often! That's why I am sticking to Fedora 12. My Workplace computers run FreeBSD
View 12 Replies View RelatedSo what kind of speed are you getting with Samba over your local network? What speeds should I be seeing? I'm currently transferring a large amount of files from one computer to another. I'm taking everything off of a desktop drive on computer A and putting it on an IDE disk on computer B. Transfers are running at around 600-700 KB/Sec. I've seen moments, mostly when the transfer starts, where speeds were at 1000KB/Sec, but that lasts a very short while and then starts to "degrade" until it reaches 600+ KB/Sec. It then seems to level off there. Is this acceptable? Is this all I can expect to get out of a 10/100 home network? The current transfer is 2.5GB. Looks like it will take 1 hour+ to complete. Transferred 12GB last night. Was looking at 4-5 hours to complete so I left it running while I was sleeping. Personally, I think this is slow. I think it could be exponentially faster.
While I'm running these transfers I'm looking at some documentation on Samba speed tweaks. I've been adding little tidbits here and there to both smb.conf files. Some of it seems to help. Sometimes there is a noticeable difference in speed. Sometimes the changes actually cause degradation in speed. If you have a speed tweak that you would like to share the information will be gratefully accepted. Samba gurus welcome to reply. How do you set up Samba in an office environment? How do you set Samba up in an environment where performance is critical?
Maybe I should forget about Samba and try using a different transfer protocol? Am I expecting too much from Samba?I should stop before I really start to ramble. Anyhow, networking beats the heck out of the sneakernet, at any speed!As a side note, or maybe quite importantly, there is a router and a network switch (not a hub) involved here. Maybe something to consider?
I was able to connect to my XP home machine from downstairs F12 machine with gnome. I also have laptop with F12 but with xfce windows manager, following the same instruction, (wireless work fine) I don't see the network icon in the file manager. Can someone let me know how to trouble shoot?
View 12 Replies View RelatedI can browse, add and delete files on my fc13-64 machine from windows xp or vista. But not from the fc13-64 machine to or from any of the windows machines. I have installed samba, smb and nmb are running (reliably) selinux is disabled and the firewall is on; although i have noticed with it off I can't browse in either direction. Can't browse windows with samba but can browse samba with windows, is a problem I overcame with fc-12 but I can't remember how.
# Samba config file created using SWAT
# from UNKNOWN (127.0.0.1)
# Date: 2010/06/13 11:16:24
[global]
workgroup = OFFICE
server string = Samba Server Version %v
log file = /var/log/samba/log.%m
max log size = 50
cups options = raw
[printers]
comment = All Printers
path = /var/spool/samba
printable = Yes
browseable = No
[Public]
comment = George's Public Folder!
path = /home/george/Public
read only = No
guest ok = Yes
[Downloads]
comment = Downloads in George's folder
path = /home/george/Downloads
read only = No
guest ok = Yes
I can't get the samba server to work on a Fedora 13 system. First of all, I've activated the "smb" service. After this, since I couldn't find any samba configuration tool in Gnome, I switched to KDE and launched Menu - Computer - System Settings - Advanced - Samba. I typed in my workgroup and netbios name and added a share (2nd tab). Then I added my user name to the blank list "samba users" (4th tab), which wasn't very effective, because this list is blank again when I leave (OK) and reopen this config tool.
From a windows machine, I can't access this Fedora system. Netbios doesn't work (ping netbios name - ...could not find name...) and trying \IP in the explorer shows an error message "Windows cannot find...".
Btw firewall and Selinux are both deactivated.
When I open Dolphin on the Fedora locally and type "smb://localhost" it *does* show a logn window, but no matter what I type in there, it just shows this login windows again after clicking OK.
I've got F14 up and running on a remote WiFi machine. I need Samba to set up a network printer. Is there a Samba GUI someone can point me to to get started on this?.
View 9 Replies View RelatedI've got a problem while sharing file through samba.
My smb.conf is here:
Then i restart my smb service, and i found the 'shared' folder on windows, but I can't access it.
I created a LINUX user account called "test1" and set the password.I installed samba, edited the /etc/samba/smb.conf file with the following
[share]
path = /home/test1
valid users = test1
[code]....
Start>Run>\192.168.0.1storage gives me "The specified network password is not correct." It lists my domain as "ANTEC" which is the name of my computer, though I've changed the workgroup to WELLS. I've run:
setsebool -P samba_domain_controller on
Trying to connect to samba locally gives me this:
Code:
[tedward@hp-firegate ~]$ smbclient //192.168.0.1/storage -Utedafur
Password:
session setup failed: NT_STATUS_LOGON_FAILURE
[code]....