I just upgraded my fedora 13 to fedora 14. I changed the cpu and the motherboard so i had to install from scratch...but I saved my iptables.
The problem is that
I do all the suff
service iptables save
And apparently it works...
But everytime I reboot I have to re run the script to forward Internet...Everything else works just fine...I mean I can ssh, vnc, etc but wont forward intel :S dont know why?
I need to forward a port to use dtella. I'm using Fedora 10, using iptables for my firewall.
I'm currently trying to forward it from terminal with this command:
Code:
sudo iptables -t nat -A PREROUTING -p udp -i eth0 -d [ip address] --dport 11823 -j DNAT --to 192.168.0.2:80
this is what I get from iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED
[Code].....
What commands do you use to set the INPUT, OUTPUT, and FORWARD chains in iptables to ACCEPT?
View 5 Replies View RelatedI'm using Fedora Core5.0 I have using Iptables for forward port 80 to port 3128(Squid) in the same of server.I need to forward using Iptables to use the other proxy server because this server i am use for vpn and mail tranfer.What a Commnand for i use?ase 1. Server 1 >Ip 192.168.0.4 SQUID WITH PORT(3128)2. Server 2 IP 192.168.0.254 PF SENSE (3128) I will use server 2 for using internet connect only.
View 1 Replies View RelatedWhat I am trying to do: bridge 2 NICs in my linux box eth0 connects to linsys router (which in turn connects to internet) eth1 connects to Xbox 360
What I did:
Code:
ifconfig eth0 0.0.0.0
ifconfig eth1 0.0.0.0
brctl addbr br0
brctl addif eth0
brctl addif eth1
[Code]...
I'm sure this is a bridging issue and there is just some option I'm not setting correctly. Also, the reason I'm connecting the Xbox 360 directly to the linux box and not to the router is for traffic monitoring purposes. Note that all connections and functionality work perfectly when the Xbox IS connected through the router.
I am trying to do a NAT forward in iptables but get the following error:Quote:[root@server88-xxx-xxx-198 openvpn]# iptables -t nat -I POSTROUTING -i tun0 -o eiptables v1.3.5: Can't use -i with POSTROUTINGAny ideas on what to do?I have an OpenVON server running and I need the client to use the ports on the OpenVPN server
View 8 Replies View RelatedSo here is my issue in a nutshell. I need to take FTP requests that hit Server_A and forward them to Server_B. Server_B is not natted...Server_B is another public server in a completely different location in the world. One thing to note is that I only have one NIC hence why you will see both in and out being eth0. This is what I have in my iptables on SERVER_A:iptables -A FORWARD -p tcp -i eth0 --sport 21 -o eth0 -d SERVER_B --dport 21 -m state --state NEW -j ACCEPTiptables -A FORWARD -p tcp -i eth0 --sport 20 -o eth0 -d SERVER_B --dport 20 -m state --state NEW -j ACCEPTI've also tried both of the above without the --sport option. When I FTP to SERVER_A (where the above iptables rule are) it connects to SERVER_A instead of forwarding them to SERVER_B.
View 1 Replies View Relatedmy company is a small company!and it only have one public ip,but my company have a lot of websites to access!now i use Reverse Proxy Server -- apahce to solve temporary!it is not convenience for me !So i think out whether iptables can not be used to forward according to the domain!!it is the test as follows:
public ip :10.0.0.1
privite ip1 :192.168.1.1
matching website domain:www1.test.com
privite ip2:192.168.1.2
matching website domain:www2.test.com
and if someone access [URL] the iptables will know they want to access 192.168.1.1 and it will forward to the server 192.168.1.1!!
I`m running a rather simple iptables script, but no matter what port i try to forward it wont open. Here are the basics:
Code:
ipt="/usr/sbin/iptables"
$ipt -F
[code]...
I have a little bit of a prediciment with my Mobile Broadband dongle, even though I know I'm in a 3G area (Dongle Supports 3G connection) my internet still loads at the normal GPRS speeds max of 5kb/s. Is there anyway to change the speed of it or do I have to keep with GPRS at the moment?
View 2 Replies View RelatedI have three machines on three networks192.x.x.x10.x.x.x172.x.x.xThe routers are set to forward communication between 192. network and 10. network, and between the 10. network and the 172. network.However, there's not routing between 192. and 172.I want to fix that by using a machine on the 10. network to forward communication between the other two networks.The machine has one etherent connection eth0 whose address is 10.1.1.11I set up an aliased ip address eth0:0 to be 10.1.1.12 using Quote:ifconfig eth0:0 10.1.1.12Then I tried to set forwarding rules the 10. machine such that 10.1.1.12 address will provide access to the machine 172.1.1.55 as followsQuote:# iptables -t nat -A PREROUTING -d 10.1.1.12 -j DNAT --to-destination 172.1.1.55The default policies for all chains is ACCEPT.I then try to access 10.1.1.12 from 192.1.1.20 expecting it to actually access 172.1.1.55 ; it does not work
View 3 Replies View RelatedLets say i have two machines on public ips. If i get incoming traffic on machine #1 on port 55242 i would just like to forward it to machine #2 on port 35000.I would just like to use machine #1 same way as a dns server works. It just redirects the traffic and tells the client where to go.
View 6 Replies View Relatediptables and multiple public-facing IP addresses. With the current setup I have a public-facing firewall with iptables which will then forward traffic to a LAN IP. I will hopefully be allotted 1 private IP per public IP, which I hope will make this much more simple. For example, I have server A with the LAN IP of 10.0.0.1 which I would like to have traffic forwarded from 5.0.0.1, the public IP. I also have server B with LAN IP of 10.0.0.2 which I would like to have forwarded from 5.0.0.2, the second public IP. From what I have read and understood, this should be a simple task, however I would just like to double check to make sure that it is in fact possible, and if so, how would it be recommended that I go about doing so. Essentially, I need to forward each public IP to a corresponding LAN IP with all ports.
View 3 Replies View RelatedThe goal is to make connection calls (ssh, ping, ...) possible from one LAN (LAN-1) to a number of (at the moment two) separate smaller LANs.These smaller LANs (LAN-2a, LAN-2b, ...) have exact same specifications (same IP range, same number of nodes, ...)!The idea is to use a Fedora box (release 14 with 2.6.35.6-45.fc14.i686) and implement an appropriate iptables routing/forwarding.The Fedora box has three network interfaces:
- eth0 (aaa.bbb.ccc.m) on LAN-1 (aaa.bbb.ccc.0/24)
- eth1 (ddd.eee.fff.n) on LAN-2a (ddd.eee.fff.0/27)
- eth2 (ddd.eee.fff.p) on LAN-2b (ddd.eee.fff.0/27)
[code]....
I'm intending to replace my current router (486DX2 w/16MB running FREESCO which has been faithfully working 24/7 for well over a decade) with a debian box with a bit more grunt and newer features. I'm currently setting up my iptables ruleset and am after a bit of advice re the FORWARD policy. A few example rulesets I have found set the default policy to DROP and the have two lines for each port forward, one to allow the traffic and one to direct the incoming packets to the correct machine.
iptables -t nat -A PREROUTING -i eth1 -p tcp --dport 25 -j DNAT --to-destination 10.0.100.10:25
iptables -A FORWARD -i eth1 -p tcp --dport 25 -o eth0 -d 10.0.100.10 -m conntrack --ctstate NEW -j ACCEPT
I'm thinking of setting the default policy to ACCEPT to cut down on typing as my default INPUT policy is DROP and unless there is a valid FORWARD rule for a particular port, the packets aren't going anywhere anyway. Or have I misunderstood something. My googling returned heaps of example scripts & not much intelligent commentary. Alternatively, what do you all use to configure & maintain your debian gateways; hand rolled iptables rules, or any toolset recommendations?
Can we enable IP tables to forward multicast or broadcast messages?
View 1 Replies View RelatedHow can I drop or forward a incoming connection from a part of a host like *.alicedsl.de
For example:
The user is connection from *.alicedsl.de on port 12345
So how can I drop this connection or forward to google.com on port 80
I'm trying to use iptables in order to forward all the incoming packets for port 5555 to port 5556 on the same server (192.168.2.101).
I wrote the following commands:
iptables -A PREROUTING -t nat -i any -p tcp --dport 5555 -j DNAT --to 192.168.2.101:5556
iptables -A FORWARD -p tcp -m state --state NEW -d 192.168.2.101 --dport 5556 -j ACCEPT
I'm using a Debian servers, as router/firwall.. I've two ethernet interfaces into the server, one for wan and one for lan. The i use SNAT so my LAN clients can access the internet throgh the debian router. That is working... Now i want to be able to access servers on the LAN site from the WAN site, and i wanna use port address translation (PAT). I have a FTP server running on a lan server, so i'm trying to portward port 21.
iptables -t nat -A PREROUTING -p tcp -i eth1 -d (WANIP) --dport 21 -j DNAT --to 192.168.1.2:21
When people try to access my FTP from the WAN site, they are redirected to the local FTP server, and they are promted for crendentials, but when the credentials are typed, and the local ftp server should answer the wan request, the connections dies.
The wan clients are being promted for credentials, so they are redirected to the local lan server, but after that the connections dies, so i think there is some kind of nat problem, when the local lan server is trying to respond to the wan request..
Here i my iptables script:
#flush table
iptables -F
#input regler
[code]....
If I forward port 80 to port 3128 for squid with an iptable rule, does port 3128 have to be open on the firewall or is this all routed behind the firewall?
View 4 Replies View RelatedSet up Evolution by using the procedures. it then indicates no Internet connection?I do not see a way to load Debian's email.
View 4 Replies View RelatedI'm interested in installing Privoxy on CentOS. I have two nics and would like to setup this on my network. One nic will be inside and all computers will use the inside address to get to the proxy. The other nic will connect to my FW and forward traffic to the internet.
I understand I need to change config file for the listening ip "inside ip:8118", but how do I forward out the the outiside interface to get to the internet? Does Privoxy just pass the DNS request like web traffic?
While I have Transmission running, whether it be up/downloading or just open with one thing unpaused and no activity, all other computer functions that need internet access are unusable. Transmission says my port is closed in its preferences.
1. How do I find and open port?
2. Will finding an open port solve the problem of all things internet not working while Transmission is?
3. Do I need to create a static ip in order to forward a port through my router?
4. Will creating a static ip and forwarding that port solve my problem of only being able to use the internet while Transmission is on?
I have a computer who has a wireless card I use for my local network and Internet. I have a second network card on this computer (onboard lan card), that I would like to use to forward an Internet connection to a older-generation laptop computer.
Main Computer Connection to Internet:
Internet > Wireless Router > Computer A
Laptop Computer:
Computer A > Laptop (via cat5 cable connecting my main computer to the laptop)
I am making a content filter for a school. I have a computer with Ubuntu Server and the SOCKS proxy, a DD-WRT router, and a switch. how I could forward all requests through the SOCKS proxy before sending it to the Internet.
View 1 Replies View RelatedI am unable to restore my iptables from iptables-save after upgrading Fedora. I cannot get iptables-restore to work, and I have resorted to entering rules manually using the GUI.
View 2 Replies View RelatedIPtables creates an error during startup as well as when I try to restart it: Here's the output of:
[Code]....
I typed this into the command line:sudo iptables -A INPUT -p tcp --dport 80 -m time --timestart 12:00:00 --timestop 23:59:59 --days Sat, Sun -j ACCEPTI get this error:iptables v1.4.4: unknown option '--days'How do I do something similar above in which I allow the internet to start at 12 o clock on Saturdays and Sundays
View 4 Replies View RelatedI do $ sudo iptables -A INPUT -p TCP -i eht0 --destination-port 80 -j ACCEPT
and then $ sudo ufw enable but I still get no internet traffic. What is wrong? Shouldn't opening port 80 to TCP allow the packets though my firewall?
I am going to start studying IPTABLES for Linux Firewall. Can any one suggest me the best Book for IPTABLES contains everything of iptables.
View 2 Replies View Related