Fedora Networking :: How To Forward A Port Using Iptables
May 7, 2009
I need to forward a port to use dtella. I'm using Fedora 10, using iptables for my firewall.
I'm currently trying to forward it from terminal with this command:
Code:
sudo iptables -t nat -A PREROUTING -p udp -i eth0 -d [ip address] --dport 11823 -j DNAT --to 192.168.0.2:80
this is what I get from iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED
[Code].....
View 9 Replies
ADVERTISEMENT
Apr 4, 2011
I'm trying to use iptables in order to forward all the incoming packets for port 5555 to port 5556 on the same server (192.168.2.101).
I wrote the following commands:
iptables -A PREROUTING -t nat -i any -p tcp --dport 5555 -j DNAT --to 192.168.2.101:5556
iptables -A FORWARD -p tcp -m state --state NEW -d 192.168.2.101 --dport 5556 -j ACCEPT
View 3 Replies
View Related
Feb 20, 2010
I'm using a Debian servers, as router/firwall.. I've two ethernet interfaces into the server, one for wan and one for lan. The i use SNAT so my LAN clients can access the internet throgh the debian router. That is working... Now i want to be able to access servers on the LAN site from the WAN site, and i wanna use port address translation (PAT). I have a FTP server running on a lan server, so i'm trying to portward port 21.
iptables -t nat -A PREROUTING -p tcp -i eth1 -d (WANIP) --dport 21 -j DNAT --to 192.168.1.2:21
When people try to access my FTP from the WAN site, they are redirected to the local FTP server, and they are promted for crendentials, but when the credentials are typed, and the local ftp server should answer the wan request, the connections dies.
The wan clients are being promted for credentials, so they are redirected to the local lan server, but after that the connections dies, so i think there is some kind of nat problem, when the local lan server is trying to respond to the wan request..
Here i my iptables script:
#flush table
iptables -F
#input regler
[code]....
View 6 Replies
View Related
Nov 15, 2010
Lets say i have two machines on public ips. If i get incoming traffic on machine #1 on port 55242 i would just like to forward it to machine #2 on port 35000.I would just like to use machine #1 same way as a dns server works. It just redirects the traffic and tells the client where to go.
View 6 Replies
View Related
Aug 5, 2009
If I forward port 80 to port 3128 for squid with an iptable rule, does port 3128 have to be open on the firewall or is this all routed behind the firewall?
View 4 Replies
View Related
May 4, 2010
I`m running a rather simple iptables script, but no matter what port i try to forward it wont open. Here are the basics:
Code:
ipt="/usr/sbin/iptables"
$ipt -F
[code]...
View 2 Replies
View Related
May 20, 2009
I'm using Fedora Core5.0 I have using Iptables for forward port 80 to port 3128(Squid) in the same of server.I need to forward using Iptables to use the other proxy server because this server i am use for vpn and mail tranfer.What a Commnand for i use?ase 1. Server 1 >Ip 192.168.0.4 SQUID WITH PORT(3128)2. Server 2 IP 192.168.0.254 PF SENSE (3128) I will use server 2 for using internet connect only.
View 1 Replies
View Related
Dec 24, 2008
So here is my issue in a nutshell. I need to take FTP requests that hit Server_A and forward them to Server_B. Server_B is not natted...Server_B is another public server in a completely different location in the world. One thing to note is that I only have one NIC hence why you will see both in and out being eth0. This is what I have in my iptables on SERVER_A:iptables -A FORWARD -p tcp -i eth0 --sport 21 -o eth0 -d SERVER_B --dport 21 -m state --state NEW -j ACCEPTiptables -A FORWARD -p tcp -i eth0 --sport 20 -o eth0 -d SERVER_B --dport 20 -m state --state NEW -j ACCEPTI've also tried both of the above without the --sport option. When I FTP to SERVER_A (where the above iptables rule are) it connects to SERVER_A instead of forwarding them to SERVER_B.
View 1 Replies
View Related
Apr 15, 2009
I have three machines on three networks192.x.x.x10.x.x.x172.x.x.xThe routers are set to forward communication between 192. network and 10. network, and between the 10. network and the 172. network.However, there's not routing between 192. and 172.I want to fix that by using a machine on the 10. network to forward communication between the other two networks.The machine has one etherent connection eth0 whose address is 10.1.1.11I set up an aliased ip address eth0:0 to be 10.1.1.12 using Quote:ifconfig eth0:0 10.1.1.12Then I tried to set forwarding rules the 10. machine such that 10.1.1.12 address will provide access to the machine 172.1.1.55 as followsQuote:# iptables -t nat -A PREROUTING -d 10.1.1.12 -j DNAT --to-destination 172.1.1.55The default policies for all chains is ACCEPT.I then try to access 10.1.1.12 from 192.1.1.20 expecting it to actually access 172.1.1.55 ; it does not work
View 3 Replies
View Related
Jun 3, 2011
iptables and multiple public-facing IP addresses. With the current setup I have a public-facing firewall with iptables which will then forward traffic to a LAN IP. I will hopefully be allotted 1 private IP per public IP, which I hope will make this much more simple. For example, I have server A with the LAN IP of 10.0.0.1 which I would like to have traffic forwarded from 5.0.0.1, the public IP. I also have server B with LAN IP of 10.0.0.2 which I would like to have forwarded from 5.0.0.2, the second public IP. From what I have read and understood, this should be a simple task, however I would just like to double check to make sure that it is in fact possible, and if so, how would it be recommended that I go about doing so. Essentially, I need to forward each public IP to a corresponding LAN IP with all ports.
View 3 Replies
View Related
Jul 18, 2011
The goal is to make connection calls (ssh, ping, ...) possible from one LAN (LAN-1) to a number of (at the moment two) separate smaller LANs.These smaller LANs (LAN-2a, LAN-2b, ...) have exact same specifications (same IP range, same number of nodes, ...)!The idea is to use a Fedora box (release 14 with 2.6.35.6-45.fc14.i686) and implement an appropriate iptables routing/forwarding.The Fedora box has three network interfaces:
- eth0 (aaa.bbb.ccc.m) on LAN-1 (aaa.bbb.ccc.0/24)
- eth1 (ddd.eee.fff.n) on LAN-2a (ddd.eee.fff.0/27)
- eth2 (ddd.eee.fff.p) on LAN-2b (ddd.eee.fff.0/27)
[code]....
View 10 Replies
View Related
Mar 25, 2010
I have a mail server on which I would like to block port 25 on my eth0 for everyone except our external spam filter. the problem is that I want our users to be able to connect via port 10025 which is forwarded to port 25, which then is blocked...
View 2 Replies
View Related
May 6, 2011
I just upgraded my fedora 13 to fedora 14. I changed the cpu and the motherboard so i had to install from scratch...but I saved my iptables.
The problem is that
I do all the suff
service iptables save
And apparently it works...
But everytime I reboot I have to re run the script to forward Internet...Everything else works just fine...I mean I can ssh, vnc, etc but wont forward intel :S dont know why?
View 2 Replies
View Related
Jul 27, 2011
Well I have been searching for more than a month now and I think I have read every single post related to this subject and finally decided to make a thread.
Now before I begin I am running Openvpn on my CentOS VPS. I have set static IP's for everyone.
Now what I am looking for is this lets say one of my clients wants port 60005 forwarded through my VPS to the internet what are the correct commands to run.
server-ip:60005 to loacl-ip:60005
Sever IP 24.xx.xx.xx
Client IP 192.168.1.2
View 3 Replies
View Related
Oct 25, 2009
What commands do you use to set the INPUT, OUTPUT, and FORWARD chains in iptables to ACCEPT?
View 5 Replies
View Related
Apr 1, 2010
I have a host and a client both running linux. Host has internet through eth2. Client needs to share that connection. The computers are connected directly using a crossover. I can ping from both fine. I figured I needed to port forward eth2 to eth0 to gain internet access in the client. How?
Code:
eth0 Link encap:Ethernet HWaddr 00:26:18:a6:fd:a3
inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::226:18ff:fea6:fda3/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]...
View 5 Replies
View Related
Sep 28, 2010
I can't port forward to ftp behind my firewall, I tried several attempts but none worked.
Can anyone help me solve this?
View 10 Replies
View Related
Nov 23, 2010
I have just set up the transmission bittorrent client on my server (using the web interface), and am trying to get the port forwarding right. After noticing low download speeds (and rare uploading), I decided to check if a port needed to be forwarded.
I found many conflicting sites, mentioning both the ranges 6881-6999 and the port 51413 (as well as TCP and UDP versus just TCP). My current configuration is to forward TCP and UDP port 51413 to my server.
View 2 Replies
View Related
Mar 18, 2011
iptables -A INPUT -p udp --dport -j ACCEPT
iptables -A INPUT -p tcp --dport -j ACCEPT
iptables -A FORWARD -p udp --dport -j ACCEPT
iptables -A FORWARD -p tcp --dport -j ACCEPT
and the rules are placed in iptables, i can see them when I do iptables -L. But when I do netstat -an | grep 161 I can see that port 161 (SNMP) is not listening. Why?
View 7 Replies
View Related
Jan 6, 2010
I'm running some vm's in FC12 with kvm-qemu and using virt machine manager. I'd like to have some ports automatically forward on startup and be able to add redirections on the fly. Redirection on the fly is talked about here, but I am getting lost on what should be basic instructions.[URL]
As far as startup, In the past I just ran qemu from the cli and manually specified redirection with redir. I can't figure out how to do it with The virt machine manager which I am using to start my VM's now. I do not want the guests to see the host. From cli startup without virt machine manager, it looked like this: qemu -m 256 -hda vm.img -redir tcp:5555::80 -redir tcp:5556::445 &
View 2 Replies
View Related
Jan 13, 2010
I am running a voip server on port 5060. I want to hide this to all the robots scanning the net permanently - I know this is not enough security - it is just to prevent them from wasting by bandwidth testing all usernames until fail2ban stops them !
I'd like to have port 5060 accepting requests only from 'trusted' hosts, while others (client with dynamic ip) use port 5065 - thus, port 5060 will only appear open for some trusted partners and the bots will skip to something else.
I have setup the iptables rules succesfully to accept only trusted hosts.
-A RH-Firewall-1-INPUT -s 93.x.y.z -p udp -m state --state NEW -m udp --dport 5060 -j ACCEPT
-A RH-Firewall-1-INPUT -p udp -m state --state NEW -m udp --dport 5060 -j DROP
I've added a PREROUTING NAT rule that change the port from 5065 to 5060 for others - but then, this gets caught in the INPUT rule as port 5060 -A PREROUTING -p udp -m udp --dport 5065 -j DNAT --to-destination 192.168.1.1:5060
This works so well that the packets coming on port 5065 are translated to port 5060 and get caught in the DROP rule...
View 1 Replies
View Related
Aug 14, 2010
I have a CentOS box which is Internet Facing. It has 3 LAN's connected to it which are for virtual machines.
I want to port forward port 445 to a machine on one of the LAN interfaces. I have tried various ways to get it done, but still cannot access that port from the interface. I definately know device hosting port 445 is live, as I can ping it from the CentOS box and use lynx to access it! (It's a web server)
iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport 445 -j DNAT --to-destination 192.168.0.2:445
View 6 Replies
View Related
Jun 7, 2010
I've been Googling about port forwarding iptables and even though there's result and I've applied it in my script, I can't make iptables forwading request to another machine so I decided to ask help.
eth0 is my Internet Interface (1.2.3.4 is the public ip)
eth1 is my Lan Interface
eth2 is my DMZ Interface
[code]....
View 14 Replies
View Related
Jun 17, 2010
There is this server where in I want to use port redirection using iptables. For port redirection I have used nat table with PREROUTING chain and REDIRECT option. Like:
Code:
iptables -t nat -A PREROUTING -p tcp --dport pop3 -j REDIRECT --to-port 8110
It just does not work. I have tried to redirect other ports as well but nothing works.
[code]....
View 15 Replies
View Related
May 6, 2011
I have a server running debian squeeze and kvm to virtualize a Windoze box. It's setup to use NAT. This is because of limits on the network by the admin and unfortunately, there isn't a way to get around this.
View 1 Replies
View Related
Sep 21, 2010
how do i enable or open port in the iptables
View 14 Replies
View Related
Jan 28, 2011
I've used iptables since it replace ipchains, and I've never had a problem like this.The problem is, as you can see by the title, that port forwarding simply does not work.
network topology:
Slackware Linux Server:
eth0 - LAN (192.168.0.0/25)
eth1 - DSL Static IP
eth2 - cable Static IP
eth1 is our standard office connection; it handles all of our default traffic (web browsing for the staff, email, etc). eth2 is our VPN connection, as well as use for all incoming connections (www, etc). Behind the linux box I have a series of Windows Server 2008 R2 boxes that are used to run our office software, website, etc - I don't care how nice they make their products these days, I simply don't trust any MS box open to the net.
Therefore, this leaves me with having to port forward port 80 from eth2 to the internal IP address of the web server.
My ruleset is as follows:
$WWW - ip address of the web server
iptables -A FORWARD -d $WWW -p tcp --dport 80 -j ACCEPT
iptables -t nat -A PREROUTING -i eth2 -p tcp --dport 80 -j DNAT --to $WWW
Running ip route shows that I have routing entries for all 3 networks, and I can ping, ssh, etc to any of the addresses without issue. OpenVPN connects across eth2 as well, and all 15 of my VPN tunnels work fine. However - and here's the kicker - if I delete the default route and replace it with the route for eth2, port forwarding works fine.
If we accept that my networks are as follows:
192.168.0.0/25 - eth0 net, gw .1
1.1.1.0/29 - eth1 net, gw .1, eth1 ip .2
2.2.2.0/30 - eth2 net, gw .1, eth2 ip .2
then ip route reveals the following:
2.2.2.0 via 2.2.2.1 dev eth2
2.2.2.0 dev eth2 scope link src 2.2.2.2
1.1.1.0 dev eth1 scope link src 1.1.1.2
[code]....
View 7 Replies
View Related
Aug 3, 2010
I have a linux server I'm intending to use as a firewall. The server has the following adapters
eth0 - Public IP (VLAN2)
eth0:1 - Public IP2 (VLAN2)
eth1 - 10.241.4.4 (VLAN4)
the Default gateway is my ISPs gateway. Additionally, I have the following route set: route add -net 10.0.0.0 netmask 255.0.0.0 gw 10.241.4.1
I have a server that exists on VLAN 208 at IP 10.241.209.67/21., its GW is 10.241.208.1 (first IP in /21 range)
as it is on the 10.0.0.0/8 network, traffic from the firewall is successfully routed from that server through my router to the FW and out to the Internet. The FW can ping, ssh, etc... the server and vice versa.
I want an iptables rule that will allow me to forward port 4401 on eth0:1 to 10.241.209.67:4401.
Is this possible since the IP is not on the same subnet as eth1, even though it is accessible?
I'm a bit better than a neophyte linux user. I have not made port forwards with it in the past without scripts to assist so I'm looking for not just "it is possible", but also the syntax of how to add it.
View 2 Replies
View Related
Feb 20, 2010
iam using arno iptables can give me command to ip forwarding cause my web server behind my router. my ip web server 192.168.0.11 and my ip router on eth 1 192.168.0.1 and eth0 i use to dial up my modem and i use pppoe for that.
View 2 Replies
View Related
Mar 23, 2010
I am playing around with transparent proxies, The current way I am doing things is the program makes a request to a computer on port 80, I use
Code:
iptables -t nat -A OUTPUT -p tcp --destination-port 80 -j REDIRECT --to-port 1234 to redirect to my proxy that I am playing with. the proxy will send out a request to port 81 (as all outbound port 80 are being fed back in to the proxy) so I want to do something like
Code:
iptables -t nat -A OUTPUT -p tcp --destination-port 81 -j DNAT --to-destination xxxx:80 The problem lies with the xxxx part. How do I change the destination port without changing changing the destination ip? Or am I doing this setup completely wrong,
View 2 Replies
View Related
