Use 2.6.32.11-99.fc12.i686 kernel,
A package needs same kernel source to build.
Add/Remove Software show only: 2.6.32.12-115.fc12... & 2.6.31.5-127.fc12...
How to get kernel-devel-2.6.32.11-99.fc12.i686?
I can't seem to find the kernel source for 2.6.31.12-174.2.22.fc12.i686. This should be a simple task, what am I missing?
View 5 Replies View RelatedForgive me if I have posted this in the wrong forum, first time poster with Fedora. I have been using Linux for some time now, mostly Mint, but Fedora 12 @ work. Anyway, I receive the following error in my /var/log/boot.log:
Code:
nvidia.ko for kernel 2.6.32.9-70.fc12.i686 was not found
and the driver does not load (My xorg.conf file is not loaded), but once I am at a
[code]...
I'd like to have a shot at building FBReader 12.1 from source for use within F12 (kernel 2.6.31.9-174.fc12.i686.PAE) but am having problems locating the following .rpm files:
libz and libbz2 -- libraries for zip and bzip2 (de)compression
libfribidi -- for bidirectional text support
lincurl, version >= 7.17 -- for network libraries integration
I had fedora 12 installed on a Macbook pro Intel first generation with ATI Radeon graphics card (see the attachment). Compiz crash when trying to watch *.wmv movie codified with wmvvc1dmo on kernel-PAE-2.6.32.9-67.fc12.i686. I want to convert the film to *.mpg, then I download the mplayer codecs in order to see the film, I can do it without problems with the on kernel-PAE-2.6.31.12-174.2.22.fc12.i686. But I updated my system last Saturday and when I was trying to see the movie again the computer began to respond really slow, then I began to close applications and when I tried to restart I got the message: "compiz is not responding".
I tried again but the same problem. Other thing that I noticed is that when the computer go to sleep, when I wake up it, the display show horizontal black spikes, it is like it doesn't have the appropriate refreshing rate. I think that the problem is related with the acceleration on graphic card. Yesterday, I booted on kernel-PAE-2.6.31.12-174.2.22.fc12.i686, and I watched the film, and the wake up was without problems. That is the reason I call it a regression.
[Code]...
when ever i try to install updates i get shown an error & the updates stop the error i get says "librpmio.so.0 is needed by package abrt-1.0.3-1.fc12.i686 (updates) librpm.so.0 is needed by package abrt-1.0.3-1.fc12.i686 (updates)"
View 12 Replies View Relatedi tried running (yum update, also yum install vlc) and i get these error
Code:
Error: Package: abrt-1.0.7-1.fc12.i686 (updates-testing)
Requires: librpm.so.0
Removing: rpm-libs-4.7.1-6.fc12.i686 (@anaconda-InstallationRepo-200911081854.i386)
[code]....
I have a tricky problem which I could soIve with a c program. I wrote one and found I didnt have gcc so I tried to install it. I was told I needed to install packages. I acknowledged and an error was generated gcc-4.4.2-7.fc12.i686 requires libgomp = 4.4.2-7.fc12 I try to install libgomp and go round again.
View 2 Replies View RelatedI'm working on a Fedora 13 server trying to intal some soft following the same steps I did with some other server with Fedora 12 ( not 13, like the new one ).First problem that I found was with 'yum install kernel-devel'
Response: Nothing to do !
Then I tryed 'yum -v info kernel devel'
Response:
Installed Packages
Name : kernel-devel
Arch : x86_64
code....
Second problem that is stopping me is 'yum install gcc' Some dpendency problem that can not be solved. Tryed --skeep-broken but nothing is installed.I don't have gcc on my sistem.
This is a clean FC12 install but I did add a few repos to support chromium and adobe - pretty much as described here:
[URL]
This is what happens - I tried all the cleanup suggestinons with no effect. Anyone got any ideas please? Thanks...
[eric@zeppelin ~]# yum repolist
Loaded plugins: presto, refresh-packagekit
repo id repo name status
[code]....
I've updated software and want to run :
jabberd-2.2.8-5.fc12 (i686)
I installed Fedora 12 onto my PC today and I've tried installing a set of updates and get the following
A package could not be found that allows the action to complete.
librpmio.so.0 is needed by package abrt-1.0.8-2.fc12.i686
librpm.so.0 is needed by package abrt-1.0.8-2.fc12.i686 : librpmio.so.0 is needed by package abrt-1.0.8-2.fc12.i686
librpm.so.0 is needed by package abrt-1.0.8-2.fc12.i686
It isn't in Yum, where do I find it?
I had the rt3070sta running fine (built from a makefile) with the previous kernel. Since the startup with the kernel referenced above '2.6.32.12-115.fc12.i686', this driver no longer works. BTW, 2.6.32.12-115.fc12.i686 came with a new rt3070sta driver.
View 1 Replies View RelatedIve also tried downloading RPMs to a usb stick and it said it was the wrong ones for my machine.
How do i find out if my machine is x32 x64 x86?
Anyway im trying to install kernel headers and devel from the fedora installation disk but i dont know how to get to the cdrom thru terminal as i cant copy the RPMs to desktop by drag n drop or using software installer.
I dont have an internet connection to the pc so i cant use yum (which would make things so much easier) so can anyone tell me how how to install these packages thru terminal?
After upgrade FC14 -> FC15
Quote:
Originally Posted by yum check
Loaded plugins: presto, refresh-packagekit
libpanelappletmm-2.26.0-2.fc12.i686 has missing requires of libpanel-applet-2.so.0
Error: check all.
I'm currently using FC 9 - 2.6.27 x86_64. (In my Hp - nx6320 laptop with- Intel centrino Duo processor). I have downloaded linux-2.6.30.2. How do I install this with i386/i686 configuration set. All that I want is a 32 bit - linux-2.6.30, because NCTUns 5.0 works only with the 32-bit kernel. I have tried following:
Code:
make ARCH=i386 menuconfig
After this, I see the architecture set to "X86_32 = Y" in the .config file. But later, after I run
Code:
make bzImage
The configuration restarts asking to select Y/N for various packages and modules. I have no much idea on what to select and what not to, in order to retain X86_32 set. I end up with the new .config file with contents as below after the make bzImage command.
Code:
#X86_32 is not set
X86_64 = y
Again it is going to be built as a X86_64 bit kernel.
How to install the kernel as 32-bit along with the existing FC-9 64 bit kernel.
I am running Fedora 13 in VMWare. I tried doing a software update and I get this error message when tring to install the updated kernel:
Test Transaction Errors: installing package kernel-PAE-2.6.33.6-147.fc13.i686 needs 6MB on the /boot filesystem
how to increase the memory space required for installation.
I just upgraded to Fedora 12 x86_64 via yum upgrade. However I have problems with booting. The new FC12 kernel won't boot. Boot output is something like
Code:
ERROR: sil: RAID type 253 not supported
ERROR: adding /dev/sda to RAID set "sil_ajabaccaaidg
ERROR: sil: RAID type 253 not supported
ERROR: adding /dev/sdb to RAID set "sil_ajabaccaaihe
No root device found Boot has failed
I resized boot partition to 400MB, formatted it as ext4 and recopied all files, modified fstab to update boot partition's UUID. Tried to set a boot flag on boot, still, I can only boot with the old kernel from Fedora 11. Is it a Fedora 12 kernel's bug or something wrong with my setup? I don't use any RAID, and the sil error is present with Fedora 11 kernel also.
I have some programs, that will only install on i586 architecture (opposed to x86_64). My CPU is 64-bit architecture. Can I install FC12/11 with i586 kernel on the hardware? How? Any disadvantages except the fact that I'm supposedly not able to use the 64-bit feature of the CPU?
View 3 Replies View RelatedI used Backtrack 5 and Fedora, basically I'm trying to install my wireless card but I don't have these installed to make && sudo. I burned the iso images for backtrack and fedora and booted my computer from them but can't figure out how to install kernel-devel on backtrack for example. I dled yum onto my flash drive but can't figure out how to install it.
View 14 Replies View RelatedI have a fedora 11 with kernel package: kernel-PAE-2.6.29.6-217.2.3.fc11.i686
I would like to install the devel package for this kernel version, but I can't find it, because in the fedora repo there is only the original kernel (2.6.29.4....) and in the updates repo there is only the newest kernel package (2.6.30....)
Where can I find the packages which are between the fedora and update repos' versions?
I had FC10 working nicely but decided to move to FC12 to be able to use the latest and greatest... Turning out to be nightmare!
My HDD is partitioned into three:
(hd0, 0) 100MB : used to be original /boot for FC 10
(hd0, 1) 120GB : /home
(hd0, 2) 30GB : /
> First thing tried: preupgrade
Using this preupgrade setup happend and asked to reboot. However, upton reboot got locked in stage2. So this option was abondoned.
> Second thing tried: installation CDs
Using this method formatted (hd0,2) and installed FC12 on (hd0,2). However, did not change anything on (hd0,0). This still held all the upgrade information from the previous trial. Now, when I rebooted after the install there was a kernel panic with error "kernel panic not syncing vfs". Thinking it might due to the (hd0,0) partition and errors in my install, I abandoned this.
> Third thing tried: installation CDs
Using this method I formatted both (hd0,0) and (hd0,2). The install was similar to above but now (hd0,0) was also formatted and after install was empty. But upton reboot I still got the "kernel panic not syncing vfs" message. I dug through google and saw references to problems in grub.conf and lo behold there were problems with my grub.conf. I don't see the initrd line at all nor do I see the initrd*.img file in my disk. The grub.conf is:
---
default=0
timeout=0
splashimage=(hd0,2)/boot/grub/splash.xpm.gz
hiddenmenu
[Code].....
from what I understand kernel-devel does not bring in ALL the header files for install modules. so what i would like to know is how to install true headers instead of using kernel-devel. I found one tutorial, but it was way out of date.
View 3 Replies View Relatedmy problem is on installing nvidia driver on fc12 32bit but, first of all, as i understood the pae kernel requires more than 4gb of ram,i have a 2.2 ghz cpu with 2 gb ram,but when i run command:uname -r it answers: 2.6.31.5-127.PAE [i have fc12 32 bit] when we try to download linux we have a 32bit edition or 64bit edition,do we have an edition which is only for pae? or when we install for example the 32bit edition on a computer with more than 4gb of ram then the kernel automatically will change to be a pae kernel??
View 10 Replies View Relatedi got an error this kernel requires an x86-64 CPU,but only detected an i686 CPU� while installing fedora12 in virtual machine..........
View 2 Replies View RelatedI tried installing the VBOX additions. But after running the VBoxLinuxAdditions.run file, building of the kernel modules failed. It gave following message: The headers of the currently running kernel were not found. If the current compilation fails then probably this could be the reason. The missing package can be probably installed with yum install kernel-devel-2.6.40.4-5.fc15.i686.
But when I tried installing the above kernel headers and devel package, it says no such package were found.kernel is 2.6.40.4-5.fc15.i686 but the kernel headers are not available for this version. They are available for previous versions i.e 2.6.40.3-0.fc15.i686.should I downgrade my kernel version (if it's possible) or is there any way things can work out. I have enabled 3D accelaration and given the memory of 128 MB for display. The memory for Virtual Box is 1 GB and hard Disk is 8 GB. The host system is windows 7.
I just upgraded my box to ubuntu 10.4 from 8.04, as usual fast and without complications.I want to use the i386 kernel instead of the i686 (2.6.32-24) with aptitude and synaptics I have downloaded and installed but when I restart it jumps directly to gdm, no grub to choose, I also try to unistall the i686 version trough synaptics, as I did in previous versions , but I couldnt find any linux-i686 entry
View 3 Replies View RelatedI have a problem to install the VMware Server (VMware-server-2.0.2-203138.x86_64.rpm) on "Fedora 13 Desktop Edition 64-bit".I traied all tips I found, but nothing was OK.Please look my linux configuration and the error messages:
(VMware installation)
[root@localhost BKP]# rpm -Uvh VMware-server-2.0.2-203138.x86_64.rpm
Preparing... ########################################### [100%]
1:VMware-server ########################################### [100%]
The installation of VMware Server 2.0.2 for Linux completed successfully.Before running VMware Server for the first time, you need to configure it for your running kernel by invoking the following command: "/usr/bin/vmware-config.pl".
code....
Where do I obtain this? I have the i586 kernel and I need the i686 kernel to run VMware. I beleive this may be the pottential reason virtualbox wasn't working too.
View 13 Replies View RelatedI'm attempting to install the driver for my atheros AR8131 PCI-E Gigabit Ethernet adapter (in my Lenovo laptop) on my newly installed RHEL5 system (it's not currently being recognized).
I tried using: 'make install' but hit an error "Makefile:61: *** Linux kernel source not found."
After this, I tried: 'sudo yum install kernel-devel kernel-headers'
To rectify this, but hit this error "No package kernel-devel available" (and the same for the headers). What should I do?
