I got a PC (32 bit) from my friend that has Fedora & Ubuntu on single HDD. Now I need to install Suse on the same HDD without destroying other distros. What are the prerequisites for this? & how to do this step by step. I'm not sure how the before installation is done?? I'm not sure about grub editing/tweaking. At present installation of SUSE is very important.
Ubuntu 10.04
Fedora 13
OpenSuse 11.3
I am desperately looking for a how to : multiboot. Checked bodhi.zazen's thread, but its totally with reference to GRUB Legacy. I have karmic installed and also vista. wondering if there is a step-wise guide to multiboot with reference to Grub2. I want to add a SUSE, Fedora and Lubuntu, but have no clue as to how. I messed up my comp earlier trying to multiboot so now I just dual-boot Windows Vista and Karmic Koala.
View 9 Replies View RelatedI've got a multiboot system with Windozin the first drive and first partition like everyone recommends. I have several distro's and just let them install their bootloaders, but always on hd0 mbr. I installed Debian 5.0.1 this way and it wouldn't boot, so I got SGD to "fix" it, which it said was successful, but all I get is a partition doesn't exist when I try to boot. I put Debian on /dev/sdb3, I loaded Linux Rescueand mounted sdb3 and verified that its menu.lst had the right boot numbers (hd1,2). fdisk even showns /dev/sdb3 as boot as shown by the asterisk under the boot column. Should I do a complete reinstall of grub, maybe using one of the other distro's as the holder of grub? At one time they did all the grub launching as each addition was made
View 9 Replies View RelatedI was hoping that someone on this forum could help me to multiboot my USB drive with openSUSE 11.4 and Ubuntu 10.10. I would also like the changes I make to the files and settings on my operating systems which are located on my flash drive to be persistent. I am a bit of a Linux noob so I was hoping for some easy, basic, step-by-step instructions on how to do this. AlsoI do not mind using a terminal or other similar applications but I would prefer otherwise as I do not want to mess up.
View 9 Replies View RelatedI have a USB PenDrive (FAT32 file system) that has 2 boot options. Boot option 1 = runs a program that updates my BIOS. Boot option 2 = runs a program that executes a basic hardware test on the PC. I don't need to access any HDD or load any operative system. the pen drive is using a DOS bootstrap (like the one you obtain when you format a device using /s option under DOS).
Can I use an advanced graphical bootloader to accomplish the same thing? It would be nice to have a background bootsplash logo of the company, while the user selects one of the two boot options, using the cursor keys. Just like GRUB...
I just got a new netbook and want to install several distro's to play with so would appreciate any advice you have. I have a 160gb drive so was going to dedicate 10gb to each distro and to xpsp3 that is comes with and about 2-4 gb for meego. Here are the distro's i want to install if possible...I am in love with KDE again so starting with Kubuntu
the last 100gb I was wanting for mp3/movies/docs.i was planing on putting the 100gb in NTFS so it could be shared with each OS? Not sure if that is possible or if there is a better solution but i want to be able to access the files from each os - in linux you just mount that partition to access it? and then i would also be able to access it via windows. I am assuming windows cannot see the ext3 file system and/or it is easier to use NTFS?right now xpsp3 is installed so not sure if can back it up via usb or if i can just download a version and burn a cd as i have a key and use WinToFlash to put it on a flash drive or can i just make partitions leaving the xpsp3 install on the netboot?
Any opinions on filesystem / order of installs / how much drive space is ideal per distro / is it even possible for that many os's / which boot loader to use?
I am using Opensuse 11.2 for the last few days, and I absolutely love it!! I have a dual boot system at the moment, with OpenSuse 11.2 and Windows7. However, i want to make space for another Linux OS for testing purpose.
More precisely, I have 750 GB hdd space. Windows 7 in C Drive (40 gb ntfs) and OpenSuse has like 30 GB for itself. Rest of the partitions hold data. I want to use one of the empty partitions for another Linux distro. Presently for Linux Mint. This partition may be rotated with other distros later, but i intend to keep Opensuse permanently.
My Question is, if i install Mint now, will its grub configure Opensuse and Windows7 into the loader automatically or will i need to manually change something? I do not want to lose my OpenSuse installation, neither Win7.
Also, is it necessary to have a common /home partition, or can the 2 distros have their own /home partitions? I'll proceed with the install only after i get a go ahead from here (with instructions )
I want to multiboot several Distros for experimental purposes. My main distro is Ubuntu 10.04.Hard drive is partitioned like such: /dev/sda1, grup bios, size = 977 Kib/dev/sda2, file system ext4, size 1.8 Tib, this is mounted on / /dev/sda3 linux swap, 4.3Gib.My question is can I use Gparted to partition a second space out of sda2, and install another Distro? Do I mount it on / ? and will grub boot see both OS without destroying the kernel of my old distro? I am assuming to partition my hard drive I have to unmount it, but can I do this without using a live cd? So many questions and so little help, because apparently this is an easy thing to do.I am just worried just seems that what I just described is too easy and I will probably destroy everything and have to start over.
View 8 Replies View RelatedHave you ever heard of multibooting many distros from the same partition?
Do you need to find a way to install the new Ubuntu 10.04x LTS into an existing partition as another option to multiboot?
Simple, you don't need to download or install any scripts or executables. read on @
[URL]
I have Windows XP and OpenSuSE 11.1 installed on my laptop. I have recently removed the recovery partition provided by the laptop manufacturer (HP) to free up some space and ideally I would like to be able to add the free space to the existing Windows partition.The current partition set up is as follows:
Code:
Disk size 93Gb, P = Primary, L = Logical, U = Unallocated
P Windows XP 36Gb /dev/sda1 /windows
[code]...
I installed Gnome 3 on a free partition of my netbook but I lost the boot to my suse kde...(MBR). I launched a live CD on USB but cannot restore Grub; the only way is to reinstall the KDE. Then it boots but does not show Gnome 3. Why the installer does not take into account both OS?
View 8 Replies View RelatedI currently have 2 operating systems on my main hdd: Ubuntu and WinXP My current setup - [storage NTFS partition, solely data][17GB WinXP partition][{extended partion}Ubuntu + swap]: [URL] I have a second SATA hdd that I would like to install Arch Linux on to. It uses GRUB Legacy, and Ubuntu uses GRUB 2. I would like to know how I would go about booting this, and figure out where my current bootloader is installed to. i.e. /dev/sda or /dev/sda5 (the / ubuntu partiton)
View 3 Replies View RelatedI have a triple boot system with Windows XP, Debian Lenny, and Fedora in that order as far as the disk partitions, and Lenny's grub controlling the multiboot. This has worked well for yearsRecently the Debian got corrupted with someependency issues, and I want to install Squeeze inplace of the existing LennyI don't need to save anything from the Lenny). Is this possible, usinga startup install CD for on-line installation of Squeeze over the Lenny partitions, and also without disturbing the Windows and Fedora boots? If it is, are there any manual steps to be taken during
the installation?
I am trying to install Ubuntu10.04 on my machine which already has on it, Win XP. Lemme lay down the setup of my machine first of all.
I got a new 320GB HDD of which I have taken 20GB as the primary partition and installed Win XP on it. Took another 220GB as an extended partition for my data storage. Around 63GB was remaining which I left it as unallocated. Decided to try Ubuntu, but preferred to boot it from the windows bootloader. Downloaded and burned the Ubuntu-10.04-desktop-amd64.iso(have a AMD x3 425 machine) and tried an install on 30GB of the 63 left.
I did not try any partition scheme. I chose the manual partition option, made a 28GB ext4 partition, made it primary, mounted the /, took another 2GB for the swap and proceeded. Chose advanced option and installed grub on the 28GB(/dev/sda6) and completed the installation.
Since no grub was installed, Ubuntu was not available. So then, used the bootpart utility to point grub to the windows bootloader, but it did not work, was giving me error when I chose Ubuntu from the bootmenu modified by the bootpart.
So tried booting with the same install cd, chose Live Ubuntu this time and mounted the 28GB, copied the first 512bytes using dd if=/dev/sda6 of=ubuntu bs=512 count=1 to a usb drive. Rebooted into windows and copied the file to C: and added it to the boot.ini. Rebooted and tried choosing Ubuntu from the boot menu but it does not work. I get a blank screen with the cursor blinking.
The machine is new and BIOS is LBA enabled by auto.
I decided to install my 4th OS, centos. I had some problem and I want to share my experience in this case. After several install and a few kernel panic message, I could successfully dual booted with Ubuntu 10.04 and centos5.5.
First: Boot from DVD and I got kernel panic. A bios update solved my problem (MSI).
Second: When I installed centos without grub and after the install when I wanted to boot in I got something like this: Kernel panic - not syncing: VFS: unable to mount root fs on unknown-block(0,0)
After 4 days I found out this:
1. I installed every OS, Ubuntu was the last one.
2. I left an unpartitioned free place for centos
3. I installed centos at last. During centos installation, at partitioning, choose "create custom layout"
4. Choose the free place as / and on the next screen you can choose, do NOT install grub.
5. Reboot > in grub choose Ubuntu 10.04 (in my case centos5 already was listed there, but don't go there), because we need to edit the grub.cfg file in ubuntu
My original grub.cfg file, (centos part) was like this:
menuentry "CentOS release 5.5 (Final) (on /dev/sdb3)" {
insmod ext2
set root='(hd1,3)'
search --no-floppy --fs-uuid --set bc47e87e-88c6-4756-8f47-361298b23a16
linux /boot/vmlinuz-2.6.18-194.el5 root=/dev/sdb3 }
I changed it for this:
menuentry "CentOS release 5.5 (Final) (on /dev/sdb3)" {
insmod ext2
set root='(hd1,3)'
search --no-floppy --fs-uuid --set bc47e87e-88c6-4756-8f47-361298b23a16
linux /boot/vmlinuz-2.6.18-194.el5 root=UUID=bc47e87e-88c6-4756-8f47-361298b23a16
initrd /boot/initrd-2.6.18-194.el5.img }
Save, restart and this time I could boot in to centos. After Ubuntu kernel update, you need to edit grub.cfg again!
've been looking for the answer both on the web and this forum but I couldn't find it;How can I put Ubuntu, Encrypted Ubuntu (Luks + LVM), Backtrack and eventually WinXP on the same drive with a Grub2 as a bootloader?I'm a bit confused about partitioning; I suppose that I need only one /boot partition to store the kernel of the encrypted Ubuntu, while the other distros will have their /boot within each partition, like this:
1) 500 Mb; /boot for the encrypted Ubuntu on partition #2
2) 10Gb; Luks + LVM Ubuntu
3) 10Gb; clear Ubuntu (whose /boot is in same partition #3)
4) 2Gb; Backtrack
5) [Win..]
In this case, will the update-grub command find and recognize correctlyll the OSs or should I edit something in the "40_custom" file
Just migrating to linux but I don't want to give up linux just yet so I've stuck in a 2nd hard drive to install linux on which I've done, now I have windows on one hard drive and linux on the other but my computer boots straight onto linux. I need the option to choose which os to boot into on startup which I've heard GRUB is the best option but I have no idea how to go about setting this up.
View 3 Replies View RelatedI have a GRUB2 USB multiboot setup. Plus I have a multiboot setup on my computer with Ubuntu 9.10, PCLinuxOS, Windows XP, and Fedora 13. The issue I'm having is different but the same. On my USB multiboot, Fedora will hang up on certain devices. Things such as touchpad, bluetooth, etc. On my PC it hangs up on first the bluetooth, then I unplug, then the USB hub, then the mouse and finally the external hard drive. It detects the devices but it freezes on detection. I did get this error before the device detection began:
Quote:
dracut; dracut-005-3.fc13
dracut: FATAL: Don't know how to handle 'root=(0,4)'
dracut: Refusing to continue
dracut: FATAL: Don't know how to handle 'root=(0,4)'
dracut: Refusing to continue
this is on the PC and the problem with the USB is that it will hang up when detecting devices.
My drive was set as LVM during installation of FC3 and has worked fine, but now i need to upgrade to some newer distro and would like to "try before i buy" one, without losing my current data and functionality (email and browsing). Once i find something that i like, then i would want to use the new distro and still have access to my old data files.
My thoughts were that i needed to somehow create a non-LVM partition in which to download and install the newer distros, but that is scary at the thought of making a mistake and losing everything. And from the success story it appears that is possibly not necessary since he uses only LVM. i tried using WINE a while back and something in the windows program started reformatting/deleting my linux account in /home and i lost everything, so i'm not thinking highly of virtualizations, and i've reverted to "if it ain't broke don't fix it"...
But now all the multimedia requires newer flash, and new flash requires new browser, and new browser wants new kernel, etc... so the time has come to try the new stuff, even though the old stuff works fine. i have a /boot ext2, and the rest is / LVM. i would like to try ubuntu or debian, knoppix, FC?. Most of the info i've found for multiboot has been anti-LVM, so it has not been useful and i'm overwhelmed by all the information. Could someone who used LVM and loaded other distros give me some detailed pointers on how it works and maybe some successful example scripts or partition tables, etc.?
I have used Ubuntu 8.x before side by side with win XP with absolutely no problems, today I have a windows 7 working great, but it was not enough for me so I've installed winXP on another NTFS partition, and then installed the Ubuntu 8, but the problem is that grub didn't detect windows 7 only detected Ubuntu and win xp ( and win XP under the name "windows Vista" !!). I did rename the win XP thing, not big thing, but there still the main problem of windows seven, it's not detected yet. So what I have done is downloading Ubuntu 10.10 beta and repeated the same thing after deleting the previous partition that Ubuntu 8 was on and created new one and used it. But the problem stays the same.
I have 80 GB - all one partition - windows 7
and 1 TB - 359 GB -storage
-26 GB - windows XP
-26 GB - Ubuntu 10.10
- ~4 or 5 GB - swap
-443 GB - storage
I know it's not organized enough but I couldn't do better using win7 storage management tool So what should I do to make windows 7 detected by grab and bootable, and I really don't want to format any drive,specially win7.
I'd like to install xp, win7, fedora, ubuntu. I installed xp then I used gparted to create a partition before xp and installed w7 both can dual boot fine. I installed fedora 12 in grub I can see fedora and windows bootloader. I can get to win7 and login fine. When I go into grub, then win bootloader, then xp, I can get to the login screen, but I can't login. I enter my pw, it takes several seconds, seems to login, then quickly logs out. I see "closing network connections", then I'm back to the xp login screen again. I'm not sure why I can't login to the xp partition. Fedora and win7 work fine. Win7 & xp worked fine before fedora. Grub menu.lst looks ok. After fixing this, I'd like to next install ubuntu
hd0,0 - sda1 - w7
hd0,1 - sda2 - xp
hd0,2 - sda3 - extended
hd0,4 - sda5 - fat32 (data)
hd0,5 - sda6 - /boot fedora
hd0,6 - sda7 - / fedora
hd0,7 - sda8 - swap fedora
I have a laptop with 250 GB SATA HD that has the following:
Win7 Pro installed first with sda1=system reserved partition, sda2=C: drive, sda5=separate software application programs to differentiate from Windows' Program Files. Ubuntu 9.10 was installed next (sda6=common swap partition for all Linux distros, sda7=Ubuntu root, sda8=Ubuntu home). Then Opensuse 11.2 was installed with sda12=root and sda13=home. Finally FedoraCore11 was installed with sda9=boot, sda10=root and sda11=home. Ubuntu and Suse have grub loader in their own root partitions.
Suse's grub menu controls all OS's. From this grub menu I can select Windows or any other Linuxes. Suse uses legacy grub because it was installed right after Ubuntu 9.10 which uses (legacy) grub.
Here is opensuse's grub menu:
# Modified by YaST2. Last modification on Wed Mar 31 11:49:28 EST 2010
# THIS FILE WILL BE PARTIALLY OVERWRITTEN by perl-Bootloader
# Configure custom boot parameters for updated kernels in /etc/sysconfig/bootloader
default 1
[Code]....
Somehow I also messed up Windows' boot file and boot partition table. Now I am still trying to use Windows installation CD to repair Windows but it has taken several hours and am still waiting for screen response. I cannot boot into any Linux distro either.
I'm having an issue with GRUB, I have four OSes on my hard drive. Here they are in the order I installed them:
Windows 7 (Windows bootloader)
Ubuntu (GRUB 1.97)
YLMF OS (GRUB 2)
Debian (Some ancient bootloader)
(For those of you unfamiliar with it, YLMF OS is an Ubuntu-based distro re-skinned to look like Windows XP. Other than the theme and branding it's exactly the same as Ubuntu) Each time I installed another operating system, it replaced my original bootloader with its own. I made the mistake of installing Debian last, thus leaving me "stranded" with an old version of GRUB. Since at the time I was relatively inexperienced with Linux, I solved the problem by reinstalling Ubuntu, which then replaced the bootloader with GRUB 1.97.
I mainly use YLMF OS, and so when I wanted to change some GRUB menu settings (the default entry, timeout, etc.) I naturally changed the /etc/default/grub file in the YLMF OS partition, not the one in Ubuntu. Once I rebooted I realized that my changes weren't being applied for that reason. Thus my problem is that my computer is using the GRUB that Ubuntu installed, not the one YLMF OS came with. How do I change which version of GRUB is used when I boot up? Yes, I could just change the settings in the Ubuntu partition, but YLMF OS came with the newer/est version of GRUB, so I want to use that instead.
I want Truecrypt to ask for password for Windows XP as usual but with the standard [ESC] option, on selecting that, i.e via Escape key, I want it to find the grub for the (unencrypted) Ubuntu install. I've installed Windows XP on the 120Gb hard drive of a Toshiba NB100 netbook then partitioned to make room for Ubuntu 10.04 and installed that after the Windows XP install. When I encrypt Windows XP, Truecrypt will overwrite the grub entry in the master boot record (MBR), I believe (?) and I won't be able to choose between XP and Ubuntu anymore. So I need to restore it back.
My setup:
Partitions:
Windows XP, NTFS (to be encrypted with Truecrypt), 40Gb
/boot (Ext4, 1Gb)
Ubuntu swap, 4Gb
[code]....
The key area of the problem is how to instruct Truecrypt when escape key is pressed, and how the Grub/Ubuntu can be made visible to the truecrypt bootloader to find it, when the esc key is pressed. Also knowing as chaining.
I've just created a bootdisk (ssd) with multiples Squasfs images I can choose to boot at the Grub2 menu.No I tried to put the sqfs-images into a ramdisk. Therefore I edited the script '/usr/share/initramfstools/ scripts/ casper'. I used the 'dirty hacks'in the ubuntuforums.org/boottoram howto but I suited them for my needs.Now the Systems stops after the kernel and doesn't find a root system.
The sqfs-image without the modification of the 'casper'-script still boots but doesn't load into ram completely.
I used MultibootISOs.exe to create a multiboot USB consisting of the following apps. All their Live CDs work fine on my computer but a couple of them had trouble with the transition to USB booting.
Ophcrack Vista 2.3.1 - OK
Ophcrack XP 2.3.1 - OK
Partition Wizard 4.2 - OK
Puppy Linux 4.3.1 - OK
UBCD4Win 3.5 - OK
[Code]...
Usually when i am installing Ubuntu, including 10.10, the installer will recognize my windows partition and ask if I want to install side by side (not Wubi). When I try it now it only gives me the option to erase and use hole disk or advanced. Ubuntu installer usually does an awesome job of setting up dualboot all the way to adding windows to grub for me. Whats changed? And how to I change it back?
View 9 Replies View RelatedWell i see this forum and i found my answer but can't resolve my question. Anyway, I'm currently working on a solution for a network work and not sure if this is possible at all.in the fair post he doing a question about the pxe server and is my same question.How to install a multiboot server.
What i nedd is a Server that will offer multiple OS, so when the client pc turn on cant choose what OS like use Windows Linux, Ubuntu, Debian, Windows 2003 server
I installed opensuse in my laptop in which I already installed opensuse.Now the grub shows first, on boot up. I want to set windows bootloader in front. In order to do that, I did the following,
1. unmount all devices "umount /windows/*"
2. my hard disk partition:- see the link cfdisk /dev/sda | Flickr - Photo Sharing!
3. mount the C drive (where win 7 is installed)
"ntfs-3g /dev/sda3 /mnt/windows -o force "
4. dd if=/dev/sda8 of=/mnt/windows/suse.bin bs=512 count=1
5. kwrite /mnt/windows/boot.ini and write the following,
[boot loader]
timeout=15
default=multi(0)disk(0)rdisk(1)partition(1)c: suse.bin
[operating systems]
c: suse.bin="openSUSE"
6. change the boot to sda3 using "sudo /sbin/cfdisk /dev/sda"
Problem is,
now windows bootloader shows when boot up, showing two options,
windows
openSUSE
windows option works normally; but openSUSE option doesn't work.
I've been running windows xp and ubuntu 10.4 on a dual boot for a bit now and decided to add the intel version of osx to my multi boot. I created a partition and installed osx without any problems. The only problem is, now when I turn my pc on all it sees it windows xp and I don't no enough to know how to fix it. How can I sort this problem out? If I cant get it all working, I at least want to get xp and ubuntu back to normal.
View 6 Replies View Related