Fedora Installation :: F11 Wont Boot On Dell C610 / What To Do?
Sep 25, 2009
After installing Fedora 11 from the dvd I booted.
I was first shown a blank blue screen with a mouse pointer then back to a text login.
At the login prompt it would not accept my keystrokes. Ctrl and backspace showed as a 2 character combination but alphanumeric keystrokes did not show.
I'm using a Dell C610 laptop with 1G of memory and 20G harddrive.
I need my computer working so since I didn't have enough disk space for a dual boot I've had to reinstall Windows.
I'm keen to switch to Linux and since I payed for Fedora 11 dvd I'd like to try and get that working before I try another distro.
View 1 Replies
ADVERTISEMENT
Nov 24, 2009
I tried to install fedora 12 in my old dell laptop LATITUDE D800. In first boot I get the black screen with
localhost login:
I see several discussions regarding this issues, but I could not resolve the problem. For example, I cannot find system-config-display. This is a fresh installation and there are no other OS in my hard disc.
View 6 Replies
View Related
Mar 18, 2011
Now, all of a sudden, after I restarted after a system update, My dell desktop inspiron hangs on boot. The kernel is: 2.6.34.8-68.fc13.i686. Not only that, but the system won't boot for any of the remaining previous kernels.
View 6 Replies
View Related
Aug 24, 2011
Partition limit is 4 on my Inspiron 1525 so even with the space available I cannot create a Fedora partition because:
50MB for Dell Diagnostics
**GB main vista partition
10GB recovery partition
2.5GB MediaDirect partition
I'm trying to dual boot vista/fedora. I know I can delete the MediaDirect partition but that causes boot problems if the button is pressed while the power is off. I'm not sure which of the 3 Dell Partitions to remove.
View 2 Replies
View Related
Sep 4, 2009
I'm running into this issue after installing Fedora Core 11 off DVD. Anaconda install the first part of the installation, then after reboot it goes into run level 3 (I think, where you have to login as root) I noticed that it said xserver failed to load before it actually boots Anaconda.
Maybe I should pull a graphic's card? I have logged in as root after the base install and did a lspci, and you can see the two Nvidia Quadro FX1700's and you can tell it is an intel board with the Intel Corp 6311ESB/6321ESB PCI Express ports. Also you can navigate through the linux directories via ls \. I tried YUM to find/install the graphics drivers but it says something about metadata not being configured. I checked the IP address with ifconfig and had to manually assign an ip.
View 14 Replies
View Related
Jan 11, 2010
I'm trying to boot my Dell Mini 12 from a USB boot disk with the ubuntu-9.10-alternate-lpia.iso image installed (I've also tried ubuntu-9.10-netbook-remix-i386.iso). I turn the machine on, press F12 to get to the boot menu, then select the USB disk. After this I just get a blinking cursor at the top left of the screen and nothing else happens.
View 9 Replies
View Related
Aug 13, 2010
The disc is fine I have installed using the CD on an Acer Laptop without any trouble what so ever. However now I need to install it on a Dell Latitude D505.It was detected and started the disc and show Ubuntu with the five dots loading screen. And then it goes black, with the laptop on. The menu with options like Install, defect test etc. can't be seen.In response to this I installed it inside Windows and that seemed to be ok, so I restarted the laptop and selected Ubuntu from the boot menu and does the dot loading screen and then black.I have searched Google and it is just threads that end up dead.
View 9 Replies
View Related
Jul 1, 2010
I have daul boot systems on Dell computers. Dell includes a Utility partition on /dev/sda1 which you are supposed to be able to boot by pressing F12 when booting. I've tried various ways to boot into it. Most recently I put
title Dell Utility
rootnoverify (hd0,0)
chainloader +1
[code]....
View 5 Replies
View Related
May 7, 2011
I have a Dimension 3000 with 2GB RAM, a 500 GB disk with two, 250 GB partitions, one for XP and one for Linux. The machine has a 1 GB Ethernet expansion card to replace the 10/100 MB integrated Ethernet card. The BIOS was upgraded to A03, the latest version. My initial attempt to boot the Live CD of Kubuntu 10.04.2 32-bit desktop left me with a blank screen, the CD-ROM drive stopped and the hard disk light on. I used the power button reset to re-gain control of the machine. On the next try, I removed the "quiet splash --" from the end of the boot options, and the machine got much further, but did much complaining about sr0 which I believe is a reference to a software RAM drive.
I went through the BIOS setup screen (hit F2 on boot to access) and under "Integrated devices:Network Interface controller" I turned off the built in network interface since the machine is using the plug-in card mentioned above. I also put the floppy disk drive at the end of the "Boot sequence" parameter. I rebooted again with the same deletion of the "quiet splash --" from the end of the boot options and the boot took me to the desktop!
Alas, when I tried to install 10.04.2 from the desktop, the installation died at the 15% point with "[Errno 5] Input/output error". The included explanation pointed at problems with either the hard drive (brand new in my case) or the CD-ROM drive or the CD itself. I'm too tired right now to pursue this further, but I will try burning a new CD at a lower speed as suggested by the error's help information.
I'm also still concerned about the earlier complaints about sr0. It is conceivable that the problem with copying the files to the hard disk could relate to problems with a RAM buffer that is used in the copying process. I mention this to remind myself to pursue that as a possible culprit if re-burning the CD doesn't help.
View 9 Replies
View Related
Nov 20, 2015
I just installed Debian jessie on my Dell Latitude E6410 using the UEFI install. No everything went well during the install, but after the install the first boot i ran into an issue that the laptop will not boot.
When I go in to the boot menu of the Dell Latitude E6410, I see that debian has created a uefi name (Debian)
When I select this, it boots without any issues. After again a reboot again, no luck still a black screen during the boot.
Seems that the only option to get my laptop booting is by pressing F12 and select Debian in the UEFI boot of the laptop.
Is there any way i can get my laptop to boot Debian directly from UEFI, without having to press F12?? (Also disabled all legacy devices to start up but no luck)...
- Debian Jessie X64 (Using 32/64 network install, via USB)
- Dell Latitude E6410 i5 (1280x800 intel graphics) latest bios A16
- SSD drive (Samsung 470 series)
- Debian is the only OS installed
View 1 Replies
View Related
Jan 17, 2010
I've never tried installing any other operating system on my desktop so I'm not sure if it's a 9.10 bug (probably not), but whenever I choose any of the options after the ubuntu cd has been loaded at startup it goes to a black screen with the underscore at the top, and promptly reboots. At this point in time I can just boot back into windows or get to the same selection screen off of the cd.I've tried burning 3 seperate cd's and at the moment and trying to boot them on my laptop (but not working... hrm). I'm thinking about redownloading the iso in a couple minutes.
View 2 Replies
View Related
Jan 9, 2011
I have 5 dell Latitude C400's that I have been trying to install ubuntu 10.10 or Linux mint 10. I cannot seem to get anywhere. Linux mint 10 and ubuntu 10.10 live cd boots a black screen and locks up.
nomodeset and i915.modeset=0 take me to a $ prompt. I have also tried xforcevesa to no avil.
when I try startx from $ prompt i get
(EE) VESA (0): no valid modes
(EE) Screen(s) found, bout none have a usable configuration
Fatal server error: no screens found
I have seen forums that state editing xorg.conf. But I cannot boot to the os to get it installed so I can edit the file.
View 9 Replies
View Related
Feb 1, 2010
My Mini13 came with hardy preloaded, and it's got pretty messed up since, so I'd like to restore factory OS via a grub entry that looks like this:
title System Restore
root (hd0,2)
chainloader +1
boot
This points to a partition which, when mounted, has this stuff in it:
bootfs.img initrd0.img install.sh logo.png syslinux.cfg vmlinuz
boot.msg install.cfg ldlinux.sys rootfs.img vesamenu.c32
I'm not a computer, but that looks pretty good to me but when I select this grub option it just says:
Boot Error
Is there a log or something that might give me more info about the error?
View 5 Replies
View Related
Jan 23, 2010
Dell PowerEdge 1600SC Server won't boot from Fedora 12 DVD in the drive because it only supports CDs as I found out after the fact. I'm a complete novice @ servers, so if you need more detail, let me know, and I'll try to provide it. This server is around 4-6 years old. it has "PXE" boot, not sure what that means? This particular server has 3 RAID hard drives. As far as I know, they have all been wiped. I looked up the service tag on Dell, and it has: Compact Disk Drive, 650M, I Internal, Half Height, 48X, BlackHitachi LG Data Storage as its CD drive. Thus, the CD drive does not support DVDs, so installation will have to be via a live CD. However, I'm trying to put Amahi Home Server (http://www.amahi.org/), and Live CD/USB stick installs are not recommended unless one is an expert Linux user.
View 3 Replies
View Related
Jun 4, 2009
I got a Dell Studio 1555 preinstalled with Vista and it already had 3 Primary Partitions. I needed to install Fedora Core 9 on this machine and to organize my HDD(500 GB)
I had two options:
1) Either to create a fourth primary partition
2) Create an extended partition with a number of logical partitions
I chose the option 2. I want to know if i make some free space by deleting one of the logical partitions, can that free space be used for installing Fedora ?
Also how to proceed with the installation?
View 4 Replies
View Related
Jan 22, 2010
I have an old laptop, and am a basic linux user, but this install is crazy. I know that I have to have acpi=off to work, and got Linux Mint 7 installed from the live cd but want Xubuntu. The Xubuntu 9.1 live CD works fine as long as I put the acpi=off parameters in the boot string, and I check the additional options just to be sure. But after install I cannot even get into the grub, it says grub loading for a split second then blinking cursor
View 2 Replies
View Related
May 20, 2010
Has anyone got Ubuntu 10.04 working on their Dell Inspiron 1100? Most of the time, the screen goes black a short time after boot. Sometimes it goes black right after the splash screen, sometimes I get to log in and then it goes black a little later. Same results when trying to boot into "safe graphics" mode. Ubuntu 7.10 works fine on this machine (although I had to do some special configuration in xorg.conf to get it to work way back when I installed it.) However, it does not appear to be possible to manually configure X in 10.04. I tried disabling the splash screen in grub based on suggestions I found for other Ubuntu versions, but that had no effect on the problem.
Is it possible to replace X with the most recent version that could still be manually configured? Would anyone know how to go about doing that?
Alternatively, if it's impossible to get this old machine to run new versions of Ubuntu, has anyone had success with (relatively) new versions of other distros on it?
View 9 Replies
View Related
Dec 10, 2010
I have Dell Vostro laptop with Core2 processor 1.8 GHz, 2 GB RAM. I want to install Fedora. I tried to install it with Fedora_14_ 32 bit and Fedora_14_ 64 bit. After booting by DVD or USB, I get initial blue screen in which I select Install and it starts for few seconds and freezes there, it does not move ahead. I got Fedora 32 bit DVD from Fedora so it should have come with checksum checked. So IMO DVD is ok, it is something else with regard to hardware detection, stopping installation to go ahead. I tried 3 times, but do not go ahead.
View 4 Replies
View Related
Dec 23, 2009
I am using a dell laptop which has Dell 1397 802.11B/G Wireless Mini Card. I not able to connect to internet and was not able to detect what actual problem is weather card is not supported (i.e. drivers are not available) .
Also, if any one can point to exact process to connect to wireless Lan using fedora12.
View 10 Replies
View Related
Feb 7, 2009
I have a Fedora 6 in DELL Optiplex 755. When I installed Fedora 8, I got the following error message:
"An unhandled exception has occurred. This is most likely a bug. Please
save a copy of the detailed exception and file a bug report against
anaconda at http://bugzilla.redhat.com"
This error message is from action of screen: "Installation requires
partitioning of your hard drive. By default, a partitioning layout is
chosen which is reasonable for most users. You can either choose to use
this or create your own."
I chose: "Remove Linux partitions on selected drives and create default
layout" or
I chose other options, but I still got same error message.
Then I switched to a new HHD, but I still got the same error message.
View 2 Replies
View Related
Jul 20, 2009
New to Fedora. I am trying to install Fedora 11 onto Dell Workstation 670. would you please kindly let me know
1) which install media could i use?2) could I maintain both Fedora 11 and Windows on my workstation?
View 1 Replies
View Related
Jun 3, 2011
I just got a new dell 15z and it hangs on the install "Waiting for hardware to initialize"of the 64bit fedora. I have tried both the nomodeset and noprobe and still to no avail. I have also tried installing ubuntu and the installer will not run so im at a loss. Any ideas from the fedora community.Is there any way I can debug anaconda so I can see where it is hanging?
View 2 Replies
View Related
Mar 11, 2009
Recently installed Fedora 10 on a DELL XPS M1330 Laptop. JUST CANT GET WI-FI TO WORK!
I first installed the ndiswrapper using this command : # yum install kmod-ndiswrapper and that was fined.
Went to dell web-site and downloaded the driver for broadcom using the command: $ wget [url]
unzip followed by saving it to home dir...
Type the following command: cd /home/username/broadcom/
Type in this command and am not really sure what they do but i think it helps to configure the wi-fi dell driver.
Rebooted the computer and checked if the driver was installed using # ndiswrapper -l and came up with bcmwl5 : invalid driver!
Just haven't a clue of what to do, so i automatically re-install ndiswrapper and started again with the same error bcmwl5 : invalid driver! Tried other Dell broadcom driver and without any luck.
View 1 Replies
View Related
Jul 4, 2009
I've tried to upgrade with prepupgrade and also to boot from F11 DVD, but just after anaconda starts, it hangs. (Just about when X starts) Maybe my hardware isn't supported yet or something but I can't find out. I don't find any anaconda log-file or anything to give me a clue what goes wrong.
description: Desktop Computer
product: Dimension E521
vendor: Dell Inc
serial: 709KZ2J
[code].....
View 2 Replies
View Related
Nov 21, 2009
i am trying to get F12 running on my Dell D600 laptop and am having some SERIOUS networking issues.
i had F11 running, but the upgrade process was FUBAR'd and doesn't work so i had to do a clean installation. upon finishing that, i now have no network connectivity.
i try connecting an ethernet cable to eth0 (LAN connection), no connection. i try connecting to my wireless network using wlan0, no connection
i turn off network manager, try adding them manually same thing.
how the frick do i get this thing to connect to the world?
Edit: p.s. the only connection that i've been able to get so far is some halfway connection to my wireless, but it puts me on the 10.x.x.x subnet, and my entire internal network is on 192.168.1.x.
Edit: one other thing, every time i make changes and reboot it tells me to log into system-config-network as root and make further changes
View 1 Replies
View Related
Feb 14, 2010
I have tried both the i386 (worked) and x86 64 dvd iso installations. Both sha1sum results don't match. I got a torrent copy and it's sha1sum doesn't match either.
The problem is with the x86 64 iso dvd. It boots but takes a long time(2-3 minutes)to load ata_piix driver when the title bar says Loading SCSI driver. After it finishes loading that driver, when prompted for the installation method, if I select CD/DVD, I'm prompted to select a driver or install disk for driver. I've tried several different generic ata drivers from the list and end up with a strange memory map interwoven with a multi color(red, white and blue)
copied output as best I can.
[0x4222fd]
[0x40f40f]
[0x519b09]
[0x4001e9]
======= Memory map: ========
[Code].....
View 6 Replies
View Related
Jun 12, 2010
I have recently bought a Dell Inspiron N5010 Laptop....and I am facing a lot of problems as most of the hardware seems to have no driver installed.... I am a not an expert, so the problems seem overwhelming to me. I have looked around for solutions on the Internet...but there seems to be no collective solution to my problem. The information regarding the problems I can provide is as follows.....
[Code].....
View 11 Replies
View Related
Jul 18, 2011
I've just been given my new dell E5520 laptop. I stuck in the f15 DVD and booted. After selecting install I get the usual boot screen then it stops with trace errors. I have heard of some issue with linux and new latops but cant find where I got this from.
I would copy them onto here but have no idea how to get the info of the laptop. If there are any specific items needed let me know and I will type them in. This is going to be very annoying and I dont what to use the windows 7 thats on it.
Just for info I have just booted linux mint 11 and that booted and loaded ok. I will try and take a pic of the fedora error
View 8 Replies
View Related
Sep 8, 2011
I just got my brand new shiny Dell XPS L502X laptop today and planned to do a dual-boot installation between Win 7 and F15. Win 7 went great but I can't even get the 64-bit Live DVD of F15 to load. The splash screen always hangs while the bar loads, but if I push ESC so I can see what's going on in the background, I get a whole lot of different error messages and the last message is "fixing recursive fault but reboot is needed." What I get is nearly identical to what I found in this post. I've already tried the usual kernel options that have always worked for me in the past, such as noapic, noacpi, and nomodeset. However, the Live DVD still won't boot. There's got to be a way to install this. Any ideas?
View 1 Replies
View Related
Jun 8, 2009
I have a dell inspiron 530 desktop with core 2 quad and 4GB memory, running 32bit vista and 64 bit fedora 10. I searched on the web with "can I install 8GB memory on dell inspiron 530", and got couple of articles that says I only needed a bios upgrade.I downloaded bios version 1.0.18 from dell and run that in Windows to replace bios 1.0.12.After it said upgrade successful and asked me whether I wanted to reboot to have the new bios taking effect, and I said yes. And it shutdown the computer, and never came up Now, when power up, I see nothing, not even the "F2 to setup, F12 to boot menu" message, much less the grub selection. Is there a way to revive the computer?
View 4 Replies
View Related