Fedora Installation :: Downgrade F11 To F10 After Failed Upgrade?
Nov 12, 2009
I recently installed Fedora 10, having chosen that version in order to be able to use the packages created by the Planet CCRMA group for doing audio recording (they don't have F11 packages ready yet, AFAIK). Last weekend I got a prompt to upgrade my system, and I naively accepted it, not even realizing that it was an upgrade to F11.
The upgrade didn't work, for reasons that I still don't know (probably a video driver issue), but since I know the F10 installation worked, and Planet CCRMA is not up to F11 yet, I'd just like to downgrade myself back to F10.
Can I just re-install Fedora 10 from the DVD I used before, or will the F11 installation cause problems? I haven't really done any work that I mind losing, so I'm not too concerned about overwriting my previous installation.
View 2 Replies
ADVERTISEMENT
Dec 28, 2009
I have a problem with my system. Fedora 12 64bit I was tinkering with enabling rawhide and upgrade firefox(3.6 / namoroka) and pidgin. Then I disabled repo. downgrade pidgin again with its dependencies (glib2 or was it glibc2). Long story short, the next time i boot up, there are a lot of error / FAILED. Boot into run level 3 is fine. But i cannot use yum and it give error regarding libglib.so or something and phython need it. Locate found those item, so it might be because the version is wrong because of those upgrade / downgrade process. Sorry if the problem isn't clear, but can anyone give direction what should i provide.
View 3 Replies
View Related
Jul 16, 2011
Today I ran preupgrade and chose Fedora 14 instead of Fedora 15 to be safe to upgrade from 13 . After lengthy upgrade, I wan able to login but after that whenever I try to open terminal and enter su to login as root, it suddenly hangs or sometimes it hangs by itself or even hangs after reboot. So I have totally corrupted upgrade.
I read somewhere and found I can go to GRUB menu at reboot and I can choose fedora 13 from there and was glad at least I can go back to old Fedora 13 but I do have to go to GRUB menu to choose Fedora 13 every i have to reboot. Is this OK? Now in Fedora 13 I have entered command as root: preupgrade and this time I chose Fedora 15. Is this OK? I am hoping the upgrade from 13 to 15 would work.
View 2 Replies
View Related
Jun 23, 2009
I had F10. Today the system suggested to upgrade to F11. In the middle of upgrade (during the installation of files) my computer had frozen for a 10-15 min. I rebooted it. Nothing is working now. I can not boot F10 and upgrade F11 does not want to continue.
View 2 Replies
View Related
Nov 21, 2009
Quote:
I've upgraded to fedora12 from fedora11 using preupgrade.
The process was successfull till the first boot, where I got above error message.
View 1 Replies
View Related
Sep 19, 2010
I have just upgraded my FC12 installation to FC13. The initial boot failed (just blank screen). Second time I received 'selinux targeted policy relabel is required'. I let that run, but still the boot did not suceed.
I then went in to verbose boot and saw that the boot would hang at libvirtd. So I disabled libvirtd for anything above run level 1. Next boot failed at atd, disabled atd. Next boot failed at 'monthly Smolt checkin'.
At that point and booted in to single user mode and dissabled SELinux, thinking that was the cause of all the problems. That did not help.
The update process has also removed my previous kernels, so I can't test a different kernel
View 5 Replies
View Related
May 16, 2010
I tried to upgrade ubuntu from 9.10 to 10.04. It is almost complete downloading packages,but i get this error:Failed to fetch http://archive.ubuntu.com/ubuntu/poo...untu2_i386.deb The HTTP server sent an invalid Content-Range header [IP: 91.189.88.30 80]I tried to change from main server to US server, but I still get this error.
View 1 Replies
View Related
Jun 11, 2011
I recently upgraded my laptop from Fedora 14 to 15 and would like to go back to 14. What is the simplest way to do this?
View 2 Replies
View Related
Dec 23, 2009
how can i downgrade php from php5 to php4 on FC11 ?
View 3 Replies
View Related
May 25, 2011
I've been excited about F15 being the first distro with GNOME 3 as default, and so I used preupgrade to download all the things necessary to upgrade my system (Fedora 14 atm) to 15. When I boot into Anaconda however, I get an error message that root doesn't have enough space for installation. Even after I removed KDE from my system, I apparently still didn't have enough. Is there a tool similar to Ubuntu's "autoclean" that can remove orphaned dependencies and the like so I can clean up root? I really want to try 15!
EDIT: I suspect that preupgrade might be dragging KDE stuff back onto my system even after I pretty much purged KDE from my system. Anything I can do to stop this?
View 1 Replies
View Related
Jan 12, 2011
I got my purple fans today and realized that there was spots on the motherboard that looked like the smaller plugs on the fans. (Yes I'm still a n00b). Google led me to a page that told me about my motherboard. I found out that my motherboard only takes DDR2 ram. And I have DDR3 in there right now. I think this solves my issue as to why my computer crashes when I try to put 8GB of ram in it.... So do I upgrade the motherboard or downgrade the ram? (It doesn't want to let me post this URL to the motherboard specs) Asus P5BV-C
View 1 Replies
View Related
May 20, 2010
I've been using Ubuntu since 6.04, not a linux guru by any means but can usually get myself out of trouble.
So, the issue... I installed 8.04 on my mother's laptop some time back as she was having trouble keeping Win 2000 running (she has a low spec no-name generic laptop btw). I live in Autsralia and she in England, i thought i could better support her if she was running Ubuntu... All has been well with 8.04 but with the new LTS release (10.04) i thought i'd talk her through the upgrade... Did the online upgrade via Update Manager, all seemed to go OK but when she went to log on after restart she got an error saying 'authentication failed' even though we are 100% sure we have the user name and password correct... Tried to do a ctrl+alt+F1 to by pass the GUI log on but couldn't get the terminal session to open up, just got a black screen - no command prompt.
So... thought OK re-install... downloaded the ISO, burned and sent her a CD in the post... talked her through the re-install, all seemed to go well (again) - BUT, after restart, couldn't log in "authentication failed" again...
So, remember i'm trying to talk a novice through all this... any thoughts!?!
If i can get her to log in i can then support her via some kind of remote sesion or other screen share... and it wont cost me a small fortune in international calls!!! But if i can't get a log in, i'm dead in the water!?
View 1 Replies
View Related
Jun 14, 2010
I have a similar problem. My eth0 also disappeared after an upgrade to Ubuntu 10.04, and didn't come back after downgrading back to 9.10. The LEDs on my ethernet port are *not* flashing. Does this mean my network card is dead, or is there any hope I can get back online?
View 9 Replies
View Related
Jul 18, 2009
I need to downgrade glibc due to a broken kernel after a libc6 upgrade attempt. See:[URL]..Especially with the reduced capabilities I have right now (few if any programs are working), how might I go about downgrading glibc to 2.6?
View 1 Replies
View Related
Jul 8, 2010
I recently tried to upgrade to 10.04 and it failed somewhere on the installation process. I managed to get the machine to boot and go into gnome but now very few programs will actually launch (terminal, nautilus and firefox is about it) and the install/update software reports al sorts of dependency issues
[Code]...
View 2 Replies
View Related
Aug 22, 2010
I had installed Ubuntu 8.04 and partitioned my drive to share 500gB with Windows XP. All was good. When I saw that Ubuntu 10.01 was available I downloaded it to update the 8.04. Ididn't want to have to redo all my configurations so told installer not to update config files. No entry in GRUB no boot. Tried to re-install 8.04 to replace 10.01 and get back to intial state. Current state Ubuntu won;t boot, XP still OK but don't know how to clean up my mess. I've attached a copy of a boot info script I ran.
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 0.97 is installed in the MBR of /dev/sda and looks on the same drive in partition #6 for /boot/grub/stage2 and /boot/grub/menu.lst.
[Code].....
View 4 Replies
View Related
May 5, 2011
I ran the software manager upgrade/update install of 11.04. When I reboot almost immediately a quick error flashes on screen that says something like "missing prefix" then it goes to an unfamiliar menu with kernel choices that are very old and look nothing like my desktop. I think it may be some old install or something I dont know. I have an eee pc. I originally installed with WUBI but have done other kernel upgrades with no issues.
View 2 Replies
View Related
Jun 27, 2010
I have configured the remote installation of Fedora 13 with kickstart with nfs installation method. All work ok until I boot the Fedora 13 client system.
Fed13 client system receives the IP address from dhcp, receives the loader, loads vmlinuz and initrd.img from tftp, load anaconda, configures the network and dev eth0, mounts nfs server to load kickstart file, loads kickstart file (language...) but when it tries to mount nfs server to install from Fedora 13 installation tree it fails.
First, I thought that I had an error on my NFS configuration but I was wrong. I opened tty with ALT+F4 on the Fedora 13 client and I sew this error:
Code:
Is this a bug or can I modify anything to correct this error? How?
View 3 Replies
View Related
Apr 22, 2010
I am going to try out the new release but when I try to upgrade I get
Failed to fetch [URL] 404 Not Found
and
Failed to fetch [URL] 404 Not Found
View 5 Replies
View Related
May 6, 2010
--Began with an up-to-date Ubuntu 8.04.3--64 LTS install; tar-copied everything from sda2 to sda3 and booted SDA3 so I wouldn't fry my main install:
[[ ' fdisk -l /dev/sda /dev/sdb '
Disk /dev/sda: 320.0 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x86dae77a
[Code]...
Will attach any logs requested; but I'm about to scrap the failed install and start over, 'cuz I want to test 10.04 LTS and the new Vmware Workstation 7.1--64 beta. The only thing I can think of is that I did not boot into the new kernel ( apt-get upgrade ) before doing the dist-upgrade. I've done a few of these dist-upgrades in the past this way; 6.06-LTS to 8.04, 8.04 to 9.x, etc
View 3 Replies
View Related
May 15, 2010
I had a failed attempt at an upgrade to 10.04 but I know the error of my ways however before I go through it again does 10.04 still have the tools available for a dial-up connection, wvdial & gnome ppp?
View 4 Replies
View Related
May 31, 2010
I have an Proliant DL380 that I use as a home server/router that I attempted to upgrade to Lucid. The gui upgrader first attempted to upgrade to 9.10 (as expected.)
I believe grub was incorrectly installed/updated. Not quite sure if grub2 was installed. The machine boots to a maintenance prompt. The partitions seem to be mounted read-only because of errors. The grub menu only shows an 8.04 kernel choice, even though all 9.10 packages were downloaded and, I believe, installed. The gui upgrader did fail with an error right before the "cleaning-up" stage. After "messing around" with it, the upgrader said I needed to reboot. So, I did and my problems started.
I tried booting the 9.10 Kubuntu cdrom and also a Knoppix 6 CD, but neither one would boot properly (gave me a BusyBox prompt.) So, I guess they don't like the Smart Array 6.
what I could try to fix and upgrade to 10.04? I really don't want to lose my configuration files (dhcp, firestarter rules, apache, squirrelmail, NFS, etc.)
View 3 Replies
View Related
Oct 11, 2010
Fail to fetch 2 ppa.launchpad.net addresses and another cause the upgrade to terminate. The error messages suggest some type of network error. Should I wait a week and try the upgrade again?
View 1 Replies
View Related
Mar 26, 2011
i am an ubuntu nooby, out of curiosity i installed ubuntu 11.04 alpha3 last night. Yes, i will definitely never install an alpha version unless i wish to test it! Frankly said, i first installed 386 version on a notebook which runs just fine. So I thought why not install the 64 bit version on my pc.
Unfortunately, the system did not finish the first reboot in order to complete the installation. First it always stopped at "checking battery state". There, I read that this bug is already fixed: [URL]... I came across this thread: [URL]... So I pressed Alt +F2 in order to log in and performed sudo apt-get update followed by sudo apt-get upgrade. Everytime there was a new update I hoped, that this will fix the issue. But when I shutdown the system with sudo shutdown now -h and restart again there is no progress.The only thing that changed is that the system no stops at "Stopping userspace bootsplash", whatever that means?
View 4 Replies
View Related
Apr 28, 2011
I used Kubuntus kpackagekit to upgrade to natty. The process started well, it downloaded everything and started to install 11.04. But then all of a sudden during Installing stage I got this error message:
"Distribution upgrade process exited with code 1"
and
"Your system might be unusable".
And it sure is unusable because after reboot I can only see Kubuntu 10.10 loading screen and
"The disk drive for / is not ready yet or not present".
There also are options for either skip mounting or manually mount hard disks. I don't have a clue how to manually mount... I get same message if I try to boot to safe mode. Does this mean I have to go to clean install? I really don't want to do that because last time it took a couple of months to get ubuntu to co-operate well enough with my laptop.
View 9 Replies
View Related
Apr 29, 2011
Got a Netbook. No CD drive so mounted image to USB stick and booted into installer from there. Chose the option to upgrade from 10.04 LTS to 11.04 and the installer hung on removing conflicting operating system files. In the end, I was forced to restart as nothing else could be done. Now, it just boots to this:
Quote: error: no argument specified.
mount: mounting /dev on /root/dev failed: No such file or directory
mount: mounting /sys on /root/sys failed: No such file or directory
mount: mounting /proc on /root/proc failed: No such file or directory
Target filesystem doesn't have /sbin/init.
No init found. Try passing init= bootarg.
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash)Enter 'help' for a list of built-in commands.
I booted to the Live CD and reinstalled Grub which now brings up a list of all the kernels and Memtest but, aside from Memtest, they still all boot to this. I don't have the passphrase for the Home folder (don't even remember encrupting it!) so I tried the ecryptfs method from the live CD to get the passphrase and backup the Home folder and do a new install but there is no trace of .ecryptfs or .Private folder and pretty much everything in the Home folder is locked. Tried an fsck on the hard drive, but nothing. I do remember thinking the hard drive was referred to as hda1, but the live CD shows it as sda1. Don't know if this affects anything. I have a feeling the installer regarded the USB stick as first hard drive and got confused.
View 8 Replies
View Related
May 7, 2011
Problem with my upgrade from 10.10 to 11.04. I got the update manager to show the upgrade to 11.04 button - proceeded. It downloaded 1300 files or there abouts then did a failed to fetch http://76.73.4.58/ubuntu/pool/main/g/. I took a screen shot which left the rest out - also did a select all - copy - no paste occurred. - re-obtained. So I'm thinking that the missing files are missing on this server and my current thought is that I will go to another server and try downloading from that one. BTW did the same upgrade from 10.04 to 10.10 to be able to upgrade to 11.04 that one worked well I didn't know there was a 10.10 upgrade since I got here; there are a few problems that went away.. This upgrade only showed after changing my status to normal from long term.
List obtained
Failed to fetch [URL] 404 Not Found
Failed to fetch [URL] 404 Not Found
Failed to fetch [URL] 404 Not Found
Failed to fetch [URL] 404 Not Found
Failed to fetch [URL] 404 Not Found .....
View 1 Replies
View Related
Jun 1, 2011
I recently tried to upgrade Ubuntu with some new updates but I get this Also if I can't fix this then is there a system restore type function for Ubuntu?
View 1 Replies
View Related
Feb 3, 2010
I have tried several times--unscuccessfully-- to upgrade to the testing branch. I change my apt sources to "squeeze". I get either "err" or "ign" on a lot of the sources when updating. I have seen several methods as to how to upgrade from stable to testing and none have worked so far. I have tried "apt-get update && apt-get dist-upgrade" as well as using aptitude to do the same similar commands. What I find is the following:
* My kernel never gets upgraded at all.
* udev is broken and mice and keyboard do not work.
* Many packages are held back and not upgraded.
I do have a debian 5 image to re-install and try again but I am not finding it to be as easy as many debian people claim. Also, I did a fresh install of squeeze using the net-install image. When the install finished and I rebooted, the computer hung on boot up. It never seemed to read where the kernel was. It would boot up, the system would beep and then reboot never finding the kernel or boot block apparently. how to get squeeze on my box? It is a 1.2 Ghz computer with 512mb ram with the intel i810 southbridge chipset I believe.
View 14 Replies
View Related
May 4, 2010
I've just reported a launchpad bug report about my desktop system being unbootable after upgrade to lucid lynx. [URL]... I opened this thread to ask if someone else experienced a similar problem and for collecting information and workarounds (none yet) about this quite serius problem. The system has an nvidia graphic card and proprietary drivers were installed before the upgrade. However I'm not sure the problem is related to this. FYI, the system booted regularly from a usb stick with ubuntu lucid lynx. SO the problem is in the upgrade path.
View 9 Replies
View Related
