Hardware :: Downgrade The Ram Or Upgrade The Motherboard?
Jan 12, 2011
I got my purple fans today and realized that there was spots on the motherboard that looked like the smaller plugs on the fans. (Yes I'm still a n00b). Google led me to a page that told me about my motherboard. I found out that my motherboard only takes DDR2 ram. And I have DDR3 in there right now. I think this solves my issue as to why my computer crashes when I try to put 8GB of ram in it.... So do I upgrade the motherboard or downgrade the ram? (It doesn't want to let me post this URL to the motherboard specs) Asus P5BV-C
View 1 Replies
ADVERTISEMENT
Dec 28, 2009
I have a problem with my system. Fedora 12 64bit I was tinkering with enabling rawhide and upgrade firefox(3.6 / namoroka) and pidgin. Then I disabled repo. downgrade pidgin again with its dependencies (glib2 or was it glibc2). Long story short, the next time i boot up, there are a lot of error / FAILED. Boot into run level 3 is fine. But i cannot use yum and it give error regarding libglib.so or something and phython need it. Locate found those item, so it might be because the version is wrong because of those upgrade / downgrade process. Sorry if the problem isn't clear, but can anyone give direction what should i provide.
View 3 Replies
View Related
Nov 12, 2009
I recently installed Fedora 10, having chosen that version in order to be able to use the packages created by the Planet CCRMA group for doing audio recording (they don't have F11 packages ready yet, AFAIK). Last weekend I got a prompt to upgrade my system, and I naively accepted it, not even realizing that it was an upgrade to F11.
The upgrade didn't work, for reasons that I still don't know (probably a video driver issue), but since I know the F10 installation worked, and Planet CCRMA is not up to F11 yet, I'd just like to downgrade myself back to F10.
Can I just re-install Fedora 10 from the DVD I used before, or will the F11 installation cause problems? I haven't really done any work that I mind losing, so I'm not too concerned about overwriting my previous installation.
View 2 Replies
View Related
Jun 14, 2010
I have a similar problem. My eth0 also disappeared after an upgrade to Ubuntu 10.04, and didn't come back after downgrading back to 9.10. The LEDs on my ethernet port are *not* flashing. Does this mean my network card is dead, or is there any hope I can get back online?
View 9 Replies
View Related
Sep 2, 2010
I have a home server running Ubuntu 10.04. I want to replace the motherboard and CPU without reinstalling the OS. I read a long time ago that this would sort of work on Windows XP, but with stability issues. However, I have a hunch that on a modern Linux there shouldn't be any problems.
View 5 Replies
View Related
Mar 26, 2010
I am planning to upgrade my system's motherboard tonight. I am going from a Via chipset and ATI graphics to Intel G41 chipset with onboard graphics. What do I need to do to Ubuntu in order to handle the upgrade? I'm running an updated version of 9.10.
View 9 Replies
View Related
Mar 6, 2010
I upgaded my system last weekend with a Gigabyte GZ-X58A-UD5 motherboard, i7 processor, ASUS EAH5770 video card, and 12 GB RAM. Sound has been erratic since then. It generally works for a short time after a reboot, but after awhile (within a few hours) it stops working properly or even completely. I've tried several different settings in /etc/modprobe.d/alsa-base.conf, but nothing I've tried helps.
I am running Kubuntu 9.10 64-bit.
Here is the output of aplay -l code...
I don't have anything connected to the HDMI connection on the ATI video card, and only inputs on the M Audio Delta 44 card.
View 8 Replies
View Related
Jul 18, 2009
I need to downgrade glibc due to a broken kernel after a libc6 upgrade attempt. See:[URL]..Especially with the reduced capabilities I have right now (few if any programs are working), how might I go about downgrading glibc to 2.6?
View 1 Replies
View Related
Dec 12, 2010
I reinstalled XP to do a dualboot with 10.10 yesterday. All was fine. Today I went through and installed everything windows needed, and everything seemed fine. Then I upgraded the BIOS on my motherboard, and suddenly everything isn't fine. I can boot to Ubuntu just fine. But when I select Windows from the GRUB menu, it just sits there with a cursor on the screen now.
View 1 Replies
View Related
Dec 2, 2010
For my project they asked me to install Fedora 11 and unfortunately I installed Fedora 13, is there any way you can downgrade to Fedora 11?
View 2 Replies
View Related
Sep 15, 2010
I'm using openSUSE 11.3 and yesterday I upgraded to KDE 4.5 from the KDE 4.5 stable repo. But after upgrading I faced some freeze/lock-up glitches which weren't there before. For example whenever I change the color scheme or style and press apply, the screen freezes although the mouse still moves around. I have to forcefully shut down to recover. So, I am thinking of downgrading to KDE 4.4. How do I go about doing that?
Here are the repos I'm currently using:
Code:
# | Alias | Name | Enabled | Refresh
---+---------------------------------------+-----------------------------------------+---------+--------
1 | KDE:45 | KDE:45
[Code]....
View 9 Replies
View Related
Jan 5, 2010
I recently installed updates for my laptop (its very old) and upgraded it form Ubuntu 8.04 to 9.10. This has caused a major decrease in permormance and I was wondering if there is any way of removing these upgrades.
View 6 Replies
View Related
Feb 5, 2010
I am having problems with 9.10 (first and foremost it won't boot properly, opens in low graphics mode only) and wishing I'd stuck with 9.04! Only find threads that didn't get answered or closed threads (including one about 'partial upgrades', which I did after booting in low graphics mode the first time. I am new to, or at least pretty green about Ubuntu and pretty much always install any updates offered - don't shoot me) Anyhow, I am hoping to avoid a full re-installation, but is there any way of going back, downgrading to 9.04?
View 9 Replies
View Related
Jul 24, 2010
I have used the 64 bit version of Ubuntu 10.04 for a while and am satisfied with it. The problem is when I watch video (Bloomberg) and listen to radio at the same time, it uses up a lot of memory (My PC has 3 GB of Ram). It degrades the performance of the PC. I also read that the only reason to use a 64 bit version is when a PC has 4 GB of Ram. Therefore, I wonder if it is possible to downgrade my current 64 bit version of Ubuntu 10.04 to a 32 bit version.
View 9 Replies
View Related
Sep 23, 2010
I want to downgrade rpm-4.7.2 to rpm-4.0.4
how should i do?
View 1 Replies
View Related
Feb 27, 2011
Last night I upgraded to Natty 11.04 and did not like it. I downgraded to 10.10.
I'm having a problem booting to a stable kernel. 11.04 uses 2.6.38. When I downgraded to 10.10, 2.6.38 was still at the top of Grub's list. When I boot there is a big black screen with a login and password. I was able to get to Ubuntu by holding down the shift key when rebooting and booted to 2.6.35-25-generic. I would rather not have to do this every time I turn on my computer. I went to Synaptic to delete 2.6.38, and did not see the version listed. I've read a lot (but I'm not a programmer). There isn't anything obvious (from this pea brain's perspective) to fix my problem.
View 1 Replies
View Related
Sep 9, 2009
I'm a CentOS 5.3 user at work. We need to run an application which needs CentOS 5.2 and it's technical support doesn't have a solution but change the version of the OS. Does anyone know how make a downgrade from version 5.3 to 5.2? Is that even possible?
View 6 Replies
View Related
May 14, 2010
I'm unable to compile ruby 1.9.X and I found out it was related to openssl, although it seems there's a patch available for ruby I don't know how to apply it so I was thinking on downgrading to openssl 0.9.8n
I'm using F13 btw, I'm still posting it here as openssl 1.0.0 was first introduced on F12, the other major distros are still using openssl 0.9.8k so there's no much information on the problem
View 2 Replies
View Related
Jun 30, 2010
As I have not been able to resolve the problems with BackupPC after the upgrade (see post [URL]) it seems that my best option is to restore my system to the state when it was working OK and then do an upgrade to F13. I did a clean install when I upgraded to F12 and took the opportunity to reconfigure the disks to include some new drives into the RAID and LVM.
This means that the disks and partitions are not the same as when I was last running F10. I have the dumps taken at that time so I propose to install F10 from the DVD into the new structure and then restore the partitions from the dumps under single user. The new partitions are formatted ext4 and previously they were ext3, not sure if F10 supported ext4.
I know that there will be some directories and files which I must not overwrite:
/etc/fstab
/dev
some parts of /boot
I can do this with restore -i.
View 1 Replies
View Related
Aug 22, 2010
I am using Fedora12 and I'm running the radeon graphics driver, my card is ATi 8500 Radeon and I can't play hardly any games or use applications that require 3D Acceleration. The catalyst driver that I need for my ATi is too old to support Fedora 12 Xorg.is there a way to downgrade Xorg so I can install my cards drivers?
If there is how can I do this. If I run a 3D game of any kind It either works for a while and locks up the system where I can't even telnet into it to shut it down, or it won't start the game or App. I know I have some acceleration due to my glx gears, I could get into great detail of what I can and can't do.
Bottom line is since the video card is too old, not even the generic radeon driver allows me full freedom so there must be a way to install the other X.org without breakage
Code:
GL_RENDERER = Mesa DRI R200 (R200 514C) 20090101 AGP 4x TCL
GL_VERSION = 1.3 Mesa 7.7.1-DEVEL
GL_VENDOR = Tungsten Graphics, Inc.
[code]....
The R200 Radeon driver for my ATi in Fedora12 is not fully compatible with my video card, I was told this on an IRC channel a while ago, I think it stopped at Radeon 9600 ATi.
View 3 Replies
View Related
Feb 15, 2011
How to use gcc compiler with matlab. Matlab can only take advantage of gcc 4.3.4, whereas in fedora 14 we use 4.5.1. Unfortunately I could not find an older version of gcc in repositories. Is there a way to downgrade gcc without creting problems to the overall function of my fedora machine?
View 9 Replies
View Related
Jul 21, 2011
How to downgrade Linux kernel Now I am using 2.6.32, and I want to downgrade to 2.6.12
View 5 Replies
View Related
Sep 9, 2010
I'm not sure if I am posting this in the right place, if not im sorry. I want to downgrade the kernel to 2.6.32 or a little older. I see the if I add the 11.2 repo I can install 2.6.31. Will that work though? Id rather not tank my system. I need to the older kernel for better support in a app I regularly use.
View 8 Replies
View Related
Jul 25, 2010
11.3 has broken my Samsung mfp color laser. According to an Ubuntu forum, the problem is that the Samsung driver is incompatible with glibc 2.11. Since just about everything seems to be dependent on glibc, the only way I can envision fixing my problem is going back to 11.2 and waiting until someone comes up with a fix to the Samsung driver problem. Other than doing a clean install of 11.2, is there a simple way to downgrade back to 11.2, or at least the parts of it dependent on glibc?
Since I was able to use the update option to move from 11.2 to 11.3, can I insert the 11.2 DVD and choose update? Or, perhaps, is there a particular set of 11.2 repositories that I can add to my 11.3 repositories, choose the 2.10 version of glibc and have the dependencies work out properly? I tried adding the download.opensuse.org/distribution/11.2/repo/oss/ repository, but Yast seemed to want to change my whole KDE installation from x86_64 to i586. Is there a group of other repositories that would make the repository route work?
View 9 Replies
View Related
Nov 30, 2010
Is there any way to downgrade 10.10 to 10.04 without reinstalling linux?
View 2 Replies
View Related
Mar 7, 2010
It looks like the latest kernel update has borked the sound on my Macbook Pro 5 4. Is it possible to downgrade to the previous version (which i believe is -19) where my sound worked? If so, how do I go about this?
View 2 Replies
View Related
May 1, 2010
Aafter installing 10.04 loads of problems have arised accumulating to no GUI. I doubt this is possible unlike windows. I haven't made any backups but could i restore it to 9.10 or copy my home dir to an external drive in text only (cant use live cd, its encrypted) and reinstall?
View 2 Replies
View Related
May 8, 2010
How do I downgrade the 10.04 theme to 9.10 or 9.04 human? I Find the newer theme interesting but its too dark on my eyes and it does not seem as crisp as it was with 9.10 on my LCD screen.
View 5 Replies
View Related
May 26, 2010
and i have an Intel graphic chipset
Code:
lspci -nn | grep VGA
00:02.0 VGA compatible controller [0300]: Intel Corporation 82845G/GL[Brookdale-G]/GE
[code]...
View 8 Replies
View Related
Jun 17, 2010
I have currently the LATEST version of Kubuntu 10.04 and I just DO NOT LIKE kde 4.. There are things I liked better in 3 than I did 4. I hate the desktop containers I hate when you turn them off and put your icons on the desktop they pop back to where they were before I just found it to have more JUNKWARE than I wanted. I just want simple KDE 3 back.
I had KUBUNTU 8.10 and thinking I was getting KDE 3 it gave me KDE 4.0.0 ( the one where the taskbar was black )
Is there a way to find to get I guess 8.04 to get KDE 3.5 back?
View 2 Replies
View Related
