Fedora Installation :: Can't Type Linux Askmethod At Boot Prompt
Aug 25, 2010
It disappears too fast! I'm using the netinstall spin of the Fedora 13 x64 disk. As far as I know, I still need to tell it to load Anaconda from the network. Is that correct? Anaconda loads from the CD, but I would prefer to use the downloaded image. Should I just let Anaconda go through its paces then tell it where I downloaded the image to on my network?
The documentation is woefully inadequate when it comes to using the netinst spin (yes, I am already thinking about providing help on the install docs based upon my experiences).
I have downloaded the i386-DVD.iso image and have burned it on a DVD using Nero Express 6, when it boots from the DVD, it give me an error message "Could not find kernel image: Linux" and the boot: prompt after that. I have burned another DVD using Infra Recorder with minimum write speed but with the same problem. I have Ubuntu already installed on the computer.
Since upgrading ubuntu boots to a prompt rather than logging into gnome. has anyone run into this? what can I do to fix this? I recently upgraded from Ubuntu 9.10 to Ubuntu 10.4. does anyone know the command to start gnome from the prompt?
I'm trying to install F11 in my new laptop [URL] and I'm unfortunately about to give up, but I want to give this option. What I want to do is use the live cd (on a usb stick) to boot on a text-only session. Supposedly the way to do that is type "linux text" on the boot prompt but the problem is that I can't even get there. After booting I get the grub menu with two options: boot, and verify and boot. Hitting esc doesn't bring me to the boot prompt. I can get to the grub menu, but I'm not sure what to do from there. And I can edit the boot and kernel options, but I'm not sure whether that will allow me to log in a text-only session.
i could manage to install fedora 12 on my laptop (asus f6a) using the iommu=off option, but when i try to boot it i just reboot without even seeing the fedora logo, i just see the the prompt for 5 seconds and then it reboots.
building an install cd or dvd media that will automatically install the Linux software on a client pc. There is no network connectivity so the client can only be loaded with Linux from CD or DVD media. The crux of the matter is that I can not automatically install the Linux software on client WITHOUT typing linux ks=cdrom:/ks.cfg at the boot prompt.
I want to avoid any user prompts and just have the software install with the RPMS that I need for this client pc at the boot prompt. Actually, when the boot prompt commences, I would like the software install to start with no user intervention. I've tried several different methods in isolinux.cfg, but the OS always wants boot prompt for the cdrom. Can the boot prompt information be read automatically from the isolinux.cfg with out user intervention? I'm looking for the same behavior as a LIVE CD that kicks off with no boot prompts after a few seconds. Here's a copy of my isolinux.cfg
default linux prompt 1 timeout 600 display boot.msg F1 boot.msg F2 options.msg F3 general.msg F4 param.msg [Code]....
When I try and connect to a VNC session from KRDC; and I am prompted for a password, the keyboard just decides to stop working. I can't type anything into the password prompt... Then the keyboard stops working for all other open applications (Firefox etc.). If I close KRDC, it starts working again... Is this a bug? Has anyone else seen this?
GNU bash 3.1.17. I say there must be, in bash, a keystroke combination that does this: I type say, two words at the prompt. Then I press HOME. And now, holding down some control key, I press a key that erases from current cursor position up to the first blank (the space between the two words). If I am right, which is the key combination? You could as well refer me to the bash manual section where the different combinations, one of them a control key are listed.
I just made a live USB of 10.04 Lucid using the Startup Disk Creator; but when I boot it gives the "boot:" prompt. Typing anything in like "help" or hitting enter just gives an error that it can't find the kernel image.
Two days ago I decided to migrate from Fedora to Ubuntu 10.04. On the Ubuntu install I chose to format the entire disk as I do not want a dual boot system. I have three disks and have set the bios to boot from dvd, then main disk, then 2nd disk, then any other bootable drive and coming from a working Fedora I know I have my "slaves" and "Master" pin positions on the disks set correctly.
When I try to boot the fresh install of Ubuntu I do not see any menu options, no boot image nothing, I get taken immediately to a grub command window and I dont know how to fix things from there. I have tried to fix things by booting into the "try before you 'buy'" thing on the installation cd and I can see that Ubuntu has been installed on the main disk, but all in all Im stuck.
So I had Ubuntu Server installed and I decided to make some new partitions using gparted via a live usb of Ubuntu desktop. And so I think messed up pretty badly. Ubuntu Server won't boot and I get the following error followed by a grub rescue promt:
Code:Diskette drive 0 seek failure error: file not found grub rescue > To me, it seems like some boot files may be missing if not the whole system. After I made the partitions, the live USB of Ubuntu was still working fine until I rebooted.So here is the bigger issue, I figured I would just reinstall everything all over again, but instead I can't.
upgrading my Karmic 9.10 to Lucid 10.4 I can't boot anymore to Linux only to Windows.My installation is a WUBI installation and I installed it on the only harddisk I have in the folder c:ubuntuNow when I boot I get a grub prompt and when I do LS I see hd0,msdos01 as partition.Now's I've tried to manual boot it by using the following commands from the ubuntu manual
set root=(loop0) linux /vmlinuz root=/dev/sda1 loop=/ubuntu/disks/root.disk ro after this command I get an error
I'm running Ubuntu within VMWare on a Macbook. I followed these steps [URL]... Recommended) to upgrade form 10.04 to 11.04, which actually upgraded to 10.10 first, and then a graphical upgrade brought me to the 11.04 upgrade, but then i ran into the problem where a grub> prompt appears when i start up the machine... nothing else happens. I found this thread [URL] which seemed similar to my problem, but the suggestions didn't work.
Code: grub> ls (hd0) (hd0,5) (hd0,1) (fd0) grub> boot error: no loaded kernel. grub> linux error: no kernel specified.
that's what I see. any way to resolve this without having to download the CD and start from scratch? It's grub 1.98, if that's important to know.
I have installed BackTrack 5 and I have set GRUB up:
Code: root (hd1,4) setup (hd1)
However, the GRUB prompt appears at boot instead of the GRUB menu. However, when I boot from the Live USB, the GRUB menu works fine. Here are the contents of the grub.cfg:
Code: # # DO NOT EDIT THIS FILE # # It is automatically generated by /usr/sbin/grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # .....
The reason I want the GRUB menu to show up of because I would like to dual-boot BackTrack 5 with Windows 7.
Ive always had luck doing any kind of updates to my system. I let it auto install the security updates lastnight. Today when I rebooted the machine it just hangs. I would like to attempt to boot only to a command prompt so that I can atleast use vi to edit files and fix the system. Do I have to edit grub to do this or is there keys I can press during boot up?
My FC12 laptop won't boot. During the attempted boot, after blue/white progress bars finish displaying on the bottom of screen, nothing more seems to happen. The screen isn't totally blank in that I seem to have a text cursor and keyboard input is displayed. But, no prompt, no login prompt, X isn't running, etc. If I hit ESCduring boot, it displays the boot messages and the boot sequence stops after "Starting atd". I'm not sure if it's related, but I had previously experimented with creating a new xorg.conf file by running "Xorg -configure' and was testing the new file with "X -?? /etc/x11/xorg.conf.new" (I forget what the -?? option was). I assumed that this would not overwrite the /etc/x11/xorg.conf file and that if I ran into problems, that the original xorg.conf would be in place. how I can get this miserable thing to boot?
I had 250gb hard disk with dual boot, xp and ubuntu 10.10.Yesterday, i tried to upgarde my ubuntu 10 to 11 from a live cd....b4 doing so, i used a win software EasyBCD to fix the mbr but it didn't work properly..and i ignored it(my biggest mistake)and deleted the ubuntu partion from the windows device manager. It just displays "Booting from Live CD" for few minutes and again displyas the same above error.What should i do now?Its ok if i m not able to recover my data back...i hv sycnd my docs on the internet.
First, I know there are numerous threads on grub errors but I have tried all possible solutions and that's why I'm here. My issue is that I'm not able to boot from the grub prompt as described for installing grub from a LiveCD https://help.ubuntu.com/community/Gr...0from%20LiveCD. I can see grub is installed but is missing the kernal and other files. code...
I ran the boot_info script and the output is attached. From what I can tell it cannot even detect an OS being installed, but I've kept everything up to date and never had any issues. Everything was fine yesterday and now this. Also, I tried the Boot Repair CD and that did not work.
I upgraded from 10.10 to 11.04. on boot up I sometimes get only the purple screen freeze and sometimes I actually get to the grub menu. I select the generic kernel and get the black screen freeze. same if I do the recovery mode. but if I get lucky on a reboot and can get the grub menu up again, I select previous linux version and then select 2.6.35 generic and it will boot into 11.04 with Unity. So, how can I get this thing to boot normal with the correct kernel version? I am fairly new to this linux world and don't want to have to go back to windows if I can help it.
I can't boot Ubuntu 9.10 on this computer (on my other computer it works fine). When I try to run it from the CD or USB I see a screen full of colored lines, and when I try to use safe graphics I get to the shell but the whole screen is blinking and I can't type any command. Anyone knows how to solve it? My graphics card is GeForce 7300 LE and on my other computer (the one that can run Ubuntu find) has an on-board graphics card.
I had Ubuntu installed, i installed Debian and there was no dual boot. So i formated all the hard disk to install only Debian. It installed but at boot i get error: no such device and the grub rescue> prompt. i googled for a solution and nothing worked:
- i tryed reinstalling grub, not worked - i did the windows cd fixmbr trick, not worked - reinstalled debian with fixmbr the first step and nothing - tryed deleting with dd the mbr, not worked - reinstalled grub from debian rescue, not worked
what should i do? i can't access my computer? please tell me how should i fix it? the google guys will kill me because i put their servers on fire
I have Windows 10 and Deb 8 dual boot, and I need to re-install Windows but want to avoid (or at least plan for) losing Grub/Linux boot.
Last time I re-installed Windows after Linux I ended up having to re-install Linux again afterwards as well, because I couldn't recover it (seemingly due to complications from encryption). So this time I'm wanting to plan and avoid that.
CURRENT DISK PARTITIONS:
Code: Select allsda1 | 550M | EFI System sda2 | 128M | Microsoft reserved sda3 | 175.8G | Microsoft basic data sda4 | 286M | Linux filesystem (Boot) sda5 | 28.2G | Linux filesystem (Root) sda6 | 91.3G | Linux filesystem (Home) sda7 | 1.9G | Linux swap
[Code] ....
As there is a "Microsoft Reserved" partition and a separate Microsoft directory within the EFI partition, if I just go ahead and reinstall Windows will it install it's boot loader/image to one of it's own partitions? And NOT affect anything else like Grub and other Linux things?
Logic tells me yes, but there seems to be many issues on the internet about installing Windows after Linux.
My primary concern is whatever happens with Windows or anything to do with dual loading etc, is that Linux will still just boot, or I can get it working again without much hassle.
Why is there a reserved Microsoft partition AND a Microsoft directory in the EFI partition? Which one boots Windows?
Why is there a separate Linux Boot partition AND a Linux directory in the EFI partition? Which one boots Linux? Where is Grub invoked from, is one redundant, etc?
How these work. It is possible I've set them up wrong, or with redundant partitions, but both systems have been booting ok for months.
I am thinking about installing Ubuntu dualboot with Windows 7. However, I feel that it'd be a pain to select Windows 7 constantly as it is my main OS for work and school. Ubuntu would be for offtime tinkering and as such probably booted once or twice a week at most. I intend to use the system to use the OS not to use it for serious work. Before I install would it be possible to install it in Dualboot while maintaining the ability to boot W7 by default unless pressing a special key to come to the Grub bootloader or something like that.
I just got an Acer netbook Aspire One. I put the Ubuntu remix on it successfully, and was using it for several days without problems. Now all of a sudden when I turn on my computer I get a grub error message with a command prompt. I've tried following the direction to restore grub but I'm getting stuck right away on the command to mount my ubuntu partition. After I type "sudo mount /dev/sda4 /mnt", I keep getting the error message "mount: you must specify the filesystem type."
I have presently a (working) boot dedicated partition, where grub stuff resides, but I want to change it to a common "/boot" folder in the root partition (in a different hdd). For some reason I can't do it. The first thing I did was to copy all the things that are in the boot partition to a boot folder on the root partition. After that, I tried: grub-install /dev/hdc1 (which is odd but it's where the root partition actually is)
When I did it from the linux I have installed on my hdd, it actually did something, I don't remember all the output (except that there was something about it not being able to access hda, which is oddly the dvdrom), but it didn't work. From a live CD, the same command (grub-install /dev/hdc1) is answered with: Could not find device for /boot: Not found or not a block device. From grub's own prompt, the things are more or less the same. First of all, it does not find stage1, even though I did copy the content from the boot partition to a boot folder in the root partition.
I tried to proceed, anyway, with root (hd1,0) and setup (hd1,0) (which is /dev/hdc1, according with the "geometry" info given by grub). "Root" is accepted, but "setup" is answered with: Checking if "/boot/grub/stage1" exists... no Checking if "/grub/stage1" exists... no Error 2: Bad file or directory type But the files are there. I can't "cat" the menu.lst from grub though, unlike with the actual working boot partition. The same error message. From the terminal, however, it's all there. I tried with /dev/hdc1 both mounted and unmounted, the same message. So, basically I have two questions, I guess:
1 - can I really do this sort of thing running a linux installed on a hdd, rather than a live cd, or is the live cd preferable for some reason?
2 - what am I missing?
(A note that may worth making is that I'm using the soon-to-be deprecated grub version, 0.9 or something, not grub2. I think it shouldn't be a problem since I've installed the system with the old version to begin with, but that may be irrelevant, I don't really know)
i am trying to compile kernel 2.6.23 on Fedora 12 After fixing a few bugs (getline error, %dil ,etc) i was able to compile the kernel made initramfs img using dracut updated grub and then booted up the new kernel 2.6.23 but it fails to boot with following error mount: unknown filesystem type 'ext4'
I decided to upgrade my FC installation to the latest version - FC itself offered the upgrade when I turned the machine on, so it appeared that it was nicely packaged to make the upgrade easy.After a long download of packages, the machine rebooted and then started taking me through configuration options (timezone, disks to use for the installation etc) but then it crashed trying to write to disk and now leaves me at a grub prompt whenever I boot.Is there any way to "get at" the installation files and get back into trying to install or do I now need to download an ISO and burn a DVD and start all over again?
