Ubuntu Installation :: Can't Boot 9.10 - Whole Screen Is Blinking And Can't Type Any Command
Feb 25, 2010
I can't boot Ubuntu 9.10 on this computer (on my other computer it works fine). When I try to run it from the CD or USB I see a screen full of colored lines, and when I try to use safe graphics I get to the shell but the whole screen is blinking and I can't type any command. Anyone knows how to solve it? My graphics card is GeForce 7300 LE and on my other computer (the one that can run Ubuntu find) has an on-board graphics card.
View 2 Replies
ADVERTISEMENT
Aug 26, 2015
After an aptitude safe-update my laptop doesn't boot any more.
I recorded the following video of the boot process: [URL] ....
The disk is fine (I ran fsck), GRUB in OK. Could it be X?
I can boot in safe-mode and also have internet connection, so not everything is lost ...
View 10 Replies
View Related
Aug 9, 2011
After installing Fedora 15 from LiveUSB and rebooting it just hangs on a black screen with a blinking cursor (underscore) in the top left of the screen. If it's reached grub, it isn't responding to any commands, and mashing several key combinations (such as ctrl-alt-f1) will produce a beep usually emitted only by the BIOS (hinting that it may never be making its way to grub).
The only particularly interesting thing about the install is that by default it wanted to boot itself from the MBR on my primary-master (Windows) disk. Instead I selected the option to boot from "the first partition in sdb1", which is my primary-slave (Linux) disk, (the first partition being /boot). This way I can change which OS boots by changing the boot order in my BIOS, and so avoiding bootloader wars.
View 5 Replies
View Related
Oct 14, 2010
I've got two laptops running Ubuntu. Both have had Lucid installed from the live cd. I have upgraded one of them to Maverick. Both distributions are running great after they boot up, but I haven't experienced any faster boot times with either distibution. Both boot to Bios and then the screen goes black with a blinking cursor in upper left corner of the screen. The black screen remains for 30 to 45 seconds and then I get the Ubuntu splash screen for maybe 5 seconds, and then desktop. Why am I not seeing faster boot times? I realize 45 to 60 seconds is good compared to other os's, but I anticipated much faster boot times. Shut down on the other hand is quite fast at maybe 5 to 10 seconds. Does anyone else get this black screen on boot? Seems like wasted time cause I can't tell what's going on during the time there is a black screen. This is not a real big deal breaker, as I don't reboot very often, but I just wonder why bootup isn't faster.
View 7 Replies
View Related
Jun 4, 2011
I built my computer and having trouble booting Ubuntu, here are my system specifications.
System Specifications:
CPU: AMD Athlon II X4 3.0GHz Quad-Core
GPU: ATI Radeon HD 5750 1GB 128-bit GDDR5
Motherboard: ASUS M4A88TD-V EVO/USB3
Memory: 4G G.SKILL Ripjaws DDR3 1600
PSU: Cooler Master GX Series 750w
HDD: 500GB Samsung 7200 RPM
I have Ubuntu on a DVD and have tried both my DVD drives, AND an external DVD drive and have no luck. I have tried different versions of Ubuntu and get the same problem. So I boot it fine and it gets the the Ubuntu splash screen and I select "Install Ubuntu" it loads for a few seconds then goes to a black screen with a blinking cursor in the top left corner. It sits here forever. I tested on my friends computer with very similar processor and it blinks for about 3 seconds then an Ubuntu splash screen appears with dots under it and it loads and works fine.
So I am 100% positive the DVD is fine and should work for my processor also. I do have Windows 7 currently installed. And I made a 100 GB partition via Windows 7 using Easeus Partition Manager. If it matters, I did test Ubuntu on my computer by installing it from VirtualBox and it worked fine...but I'd rather do a dualboot because I don't like running an OS in another OS and its performance isn't so great when emulating an Operating System...
View 9 Replies
View Related
May 3, 2010
I dual-boot Windows 7 and Ubuntu. Sometime between 4/18 and a few days ago, something happened with Windows booting up. Ubuntu boots fine, but whenever I try to boot Windows, it just goes to a black screen with a blinking cursor (the command line kind, not a pointer). At first I thought it was Windows, but I have run the repair CD and executed chkdsk /f and chkdsk /r on all partition related to windows. No effect.
I ran a system check designed for issues with booting up, and it found no errors. I have looked at my GRUB files, and they all look fine. I am not sure if it is GRUB or Windows. I tried reinstalling the Windows boot-loader, and it had the same effect, the only difference is that it bypassed GRUB. The reason I think it may be GRUB is that the error happened around the same time as me upgrading from Karmic to the Lucid RC. I have posted this on a Windows 7 forum.
View 9 Replies
View Related
Mar 8, 2011
I have a problem with booting from a USB flash drive. I have Acer TimelineX 3820TG. I have Windows 7 Home from Acer and I installed Mandriva OS from USB(from USB because this Acer doen't have a DVD drive). It was OK, but I want reinstall Windows 7 and so I did. Now I have Windows 7 Professional and it wrote over Mandriva's GRUB. It wasn't a big problem. For a while I was just using Windows 7 but now I am thinking that I need some OS with Linux and I am thinking about Ubuntu. But when I tried to boot from USB with Ubuntu I get a black screen with a blinking cursor after the BIOS POST.
I was trying many applications to create a bootable USB drive and many versions of Ubuntu (and other Linux distributions), but nothing worked. I tried to Google for answers but I found many problems where all booting goes to black screen but in my problem Windows 7 boots fine from disc but from USB doesn't work.
View 1 Replies
View Related
Jun 24, 2010
Problem-PC automatically boots into a black screen with blinking cursor. No message or nothing
I have 4 HD. Primary drive has Windows Vista, Secondary no OS installed. Sata1 HD Ubuntu 10.04, Sata2 Windows 7. Prior to installing windows 7 all was perfect but once I did it, grub got all screwed up. The only way I can boot into grub is if I manually select my Sata1 which has Ubuntu on it and only then it allows me to select Linux or Windows OS. How can I change that so it can boot up normally as before? I'm assuming that grub was installed in the primary drive which has vista on it, but once I installed windows 7 it got deleted and when I tried reinstalling Ubuntu, the grub was not installed in the primary drive.
View 9 Replies
View Related
May 9, 2010
I just installed 10.04 and for some reason once the grub screen loads and I can pick what I want to launch (regular kernel, or rescue mode), it attempts to load and then I just get a blinking cursor. I've found that I can't load the live CD either unless I use the nomodeset flag. I read in another post that this problem should be fixed by editing the /etc/default/grub file to add the nomodeset flag, which I did via nano. However, the file also says you must run update-grub after you edit the file. I tried this and it said something like it can't find / (is /dev mounted?) The hard drive itself is mounted, so I don't know why /dev wouldn't be mounted. How can I get this problem solved so I can boot to 10.04 successfully from the hard drive? (I'm typing this from the live CD right now).
View 9 Replies
View Related
Jun 4, 2010
I have installed today Ubuntu 10.4 LTS ..after installation the OS does not boot and just shows blank screen with cursor blinking ...any idea ..I have searched the forum a lot but cannot understand why this is happening ..re-installed twice ..This is AMD64 bit but I am installing the 32 bit ubuntu 10.4 LTS.
View 9 Replies
View Related
Nov 7, 2010
I am trying to run Ubuntu from a live USB, everything seems to be great until I get to the part where the GUI should come up. Then I get this screen. It's a little hard to see, but it's basically a white bar at the top and black underneath. The black is flickering a lot and the flickering can stay for a short while (30-120 seconds) even after I have rebooted into windows. Sometimes the bar at the top is another solid color (purple,blue, orange, usually white though), I think it is putting my monitor in a strange version of it's self test.
When it is unplugged the monitor while cycle through full screens of different colors. I have tried Ubuntu 10.10 Desktop AMD64, 10.10 i386, and the latest Fedora to see if another distro had different results. I have also tried 2 other USB drives. I am using Universal USB Installer 1.8.0.8 to make the drives. My own searches have found some problems with graphic drivers for the GeForce 8800 GTX, but they a bit dated. I have tried adding vga=vesa to the boot arguments, I am not sure if I did it right or not, but it resulted in a black screen with a blinking line instead and no flickering.
System specs:
AMD Phenom II 740BE (unlocked to Quad Core @ 3.4Ghz)
ASRock Extreme3 870
WD Caviar Black 640GB 7200RPM 6.0Gb/s
GSkill 4GB PC1600
GeForce 8800 GTX
Dell 3007WFP
View 1 Replies
View Related
Mar 21, 2010
Neomagic 256ZX(I think) video card, 256 MB RAM Well, after the upgrade went fine, I rebooted and was greeted by a purple 10.4 screen, after which I was greeted with a blank screen with 6 blinking dots. I don't know if this is a new video driver failure (its a pretty old laptop, theres no need for new drivers) or if its a grub problem. Since I can't get to a grub it goes BIOS>Purple 10.4>nothing and I don't get a terminal login, the laptop is now considered bricked. However I was okay with the install and was wondering if theres a way to fix it.
View 1 Replies
View Related
Sep 23, 2010
I have installed it from usb as the cd installation failed at the point where you decide which type of installation you want (lamp or samba, etc)the installation completed but when booting nothing happens, only a black screen with a blinking cursor. pressing the shift key or any other keys doesn't work.strangely when i boot from the usb flash drive again (and not from the hard drive) the server does boot and asks for the user name and password!i have chosen the guided lvm partition with 20% reserved for system files.my machine is an athlon xp 2GHz (32bit), 1GB, SATA hard drive, nvidia 6600 graphicsmy guess is that its a problem with grub and lvm.
View 9 Replies
View Related
Dec 16, 2010
I have an Acer Aspire One AOA110 that came with Windows XP.
I created a usb flash drive install for Ubuntu 10.10 netbook edition and went through the install process (wiped disk clean, not a dual boot with WINXP).
Before install, I was able to run Ubunut from the usb key with no problems.
At the end of the install, it told me I needed to restart, so I clicked the "restart" button and the removed the usb drive. Nothing happened and it never restarted and just completley hung for about 20 minutes. I manually shut down the computer by holding the power for 10 seconds and then rebooted the machine. Now all I get after the "acer bios" screen is a black screen with a blinking cursor. If I press any buttons, the computer beeps at me.
View 9 Replies
View Related
Feb 10, 2011
I have rebuild my system, with an Asus motherboard M4A88TD-V EVO/USB3 with radeon 4250 integrated 8 Gb memory
Athlon II 4x 640 2 x 1 TB sata3 WD Harddisks I installed 10.10 64bit, and ran through the whole install with the alternate CD without problems, Installed grub in the MBR on the 120 Gb partition for 10.10, it even recognised my 2 3ware pci raidcontroler on which 8.04 is installed.
When I start I get grub, when I choose for 10.10 I get a black screen with a cursor blinking in the left uppercorner. Luckily I can start into 8.04. I have no idea how to continu. for now I will burn a knoppix cd so I can read the ext4 partition with 10.10 and hope to find something to solve this.
View 6 Replies
View Related
Nov 28, 2008
I'm a fairly new linux user and I seem to have a problem with ubuntu 8.10 after installing it.To make sure everything was working fine before i could do a dual installation, i ran the live cd and it worked like a charm.Everything works fine in the live cd....the internet, sound, graphic drivers (even the special effects seemed to be work fine)I thought wow...after having a bitter experience with Ubuntu 8.04 and 7.10 (I couldnt install those at all coz of driver issues and stuff) I thought this is it!So I used the wubi installer to install ubuntu in my D drive (I didnt wanna use C just to be safe as the primary OS is installed there). Gave it a healthy space of 15 gb. Finished the installation and the rebooted.I went inside Ubuntu which started doing its installation and copying of files and stuff. So far so good.....
And then once it finished its installation and copying of files (100 %), the screen went blank and i see a cursor blinking. I thought maybe its restarting and thats why it must be doing this.I wait for nearly 10 mins and nothings happening except for the cursor blinking on the black screen. I press the caps lock key to see if anything is processing. Nope. So i manually shut it down and then load ubuntu.It loads like 20-30%....rests for a while....and then it loads a bit (not completley)....after that it takes me to a command line asking me for my password and username.I enter those correctly. But it doesnt get me into the main GUI screen yet.
It shows me a lot of the this error msg:
-bash: /dev/null:Permission denied
I'm still in command line (or terminal to be precise). So i use 'startx' (something which i learned from my csci labs ) to start a new session. It showed signs of starting a new session (i can see the mouse pointer and stuff) and then poof....back to the command line again.So I shut it down and load it again in recovery mode. It shows signs of the same symptoms in the splash screen (going very slow after 20-30 % ) and then this time, before i'm asked for my username and password in the command line, it shows a lot of warnings: fake daemon running (or something like that) and i cant even use startx!So i didnt know what to do, uninstalled ubuntu and did a fresh installation (wubi and in the same D drive). Reboot. Install and copy files 100% and then a blank screen again with the dreaded cursor blinking. I still wait for about 10 mins and nothing yet happens. So I manually shut it down (again) and then load ubuntu and unsurprisingly i have the same problem as what i described before....doesnt load properly and i'm not able to come out of the terminal.
View 2 Replies
View Related
Feb 5, 2010
I was going to set up an ubuntu server, but ran into some issues. When I try to install ubuntu server 9.10, it immediately goes to a black screen with a blinking cursor as soon as I press enter on the menu. I've tried pressing F6 and editing options - noapic, nolapic, irqpoll, vga=[something...] and nothing worked. I then downloaded a standard ubuntu desktop cd, and the livecd works, and I can successfully start the install!
I've heard that I should probably use the server install if I want to use this as a server (which I do; webserver for a group of people, website, ftp, ssh.) I've also heard that it's possible to just install everything needed overtop of an ubuntu desktop base. What should I do? Are there other things I should try to make the server install work? Or is it not worth the effort, and I should just go with a desktop install and then work from there? tasksel? (It's a Dell XPS, the graphics card is NVIDIA Geforce 9800 GT).
View 1 Replies
View Related
Mar 11, 2011
1) Burned Ubuntu 10.10 to a disk, When tried to install (Select Install Ubuntu) screen goes blank with dim backlight and a blinking cursor on top. Same thing happens with Try Ubuntu without installing.. 2) Tried on Lenovo T410 and Dell 1330. issue exactly remains the same.3) Tried it on a VM Worksation 6.0, "This kernel requires an x86-64 cpu but only detected an i686 error is popping up". So thought its a Ubuntu x32 an compatibility, hence downloading the 64 bit now. Will burn and check it later.
Brand: Lenovo T410
Intel(R) Core(TM) i5 CPU M520 @2.40Ghz
BIOS: A1674IMS Ver 1.0L
[code]...
View 1 Replies
View Related
Aug 4, 2011
Just curious if there is any sort of issues with Ubuntu and JBOD assignments. I had my 2 500GB hdd's as JBOD through my mobo BIOS/RAID Config and it didn't like it. It installed just fine and showed the hard drives separately. I really didn't think anything of it so I continued on.After the install completed successfully, and I rebooted the system, it came to a blank screen with a blinking cursor and wouldn't continue on. So I tried restarting a few times, no luck. Finally I was like "okay screw this, going to install with no RAID setup or JBOD setup." (had RAID issues last night. rabble rabble) Removed RAID configurations and BAM started right up..S. Semi-new to Linux/Ubuntu. Know the basics and what not, just not some of the more advanced stuff.Edit: Okay, so I restarted my computer and removed my USB drive (which I had installed Ubuntu from) and it didn't boot. So it was NOT an issue with JBOD. Guess I'll look for a resolution for that, though.
View 2 Replies
View Related
Feb 10, 2011
I am attempting to install Ubuntu 64Bit Server 10.04 on a new server.
Server Specs:
Xeon E5620
12GB RAM
2X 160GB 7200 RPM in RAID1 (Onboard Software RAID)
Super Micro X8DTI-8
I am doing a typical install with no special functions on a RAID1 onboard Intel array. I know the array works because I tested it by installing Windows Server 2003 which works fine. The RAID also shows as healthy in the BIOS.
This problem is very difficult to remedy because everything seems to install fine with Ubuntu but when you reboot after the install you get a blinking cursor _ and nothing else. It appears that something happened when loading the OS but it's impossible to get past the blinking cursor because you can't type anything or escape out of it. The only thing that it will register is Ctrl+Alt+Del which will restart the server.
The funny thing is it does not display the typical Sigkill and show processes shutting down. The screen goes black and it restarts only to return to the blinking cursor. I am on my 6th attempt at an install with ubuntu and I am seriously considering switching over to windows unless.
I am almost certain this is a RAID issue because I can load the Ubuntu on 1 drive without any issues but I always get the blinking cursor in the RAID.
View 1 Replies
View Related
Jun 5, 2011
I've tried to install Ubuntu 11.04 for the whole afternoon and I'm stuck.Reason why I use the alternate cd is that I want to use an encrypted logical volume (full system, not just home folder). I did not create the partitions myself, I simply used the installer option for "guided LVM with encryption".But now I have the problem that I finished the installation without error, but when I boot my laptop nothing happens. I do only get a blinking cursor, but no GRUB, which I installed too (because there is a nother hdd with win 7).
View 8 Replies
View Related
Nov 17, 2010
I downloaded the OS I wished to use, loaded it onto a clean 4.0GB drive, everything went as planned. But then I rebooted, and it never booted the file off of the USB. So, I changed the boot options, and tried it again. Now, every time I boot with the drive in, it goes normally and then opens a blank page with only one line of text detailing the date of copyright, something about Linux, etc... And a blinking cursor. Is this normal and I just have to wait for it to load, or is something not being processed? Any information you guys need I can obtain, I'm not new to computers but I am new to changing OS's.
View 1 Replies
View Related
Dec 27, 2010
Six months ago I installed Ubuntu 10.04 to my otherwise Win XP work laptop. I decided to continue to use Windows' boot loader as primary: I told the Ubuntu installer to put grub2 onto a separate partition, then used dd to copy the first 512 bytes into a file in my Windows C partition, then edited boot.ini to link to it - its a common technique that is described in many support forums and blogs. This worked fine, and continued to work until a few weeks ago. One day I chose the Ubuntu option at the Windows boot loader and got a blinking cursor at top left of screen and no grub2 menu. I was able to use SuperGrub2Disk to discover and boot from my grub2 install - so that didn't appear to be broken. I finally fixed it by dd'ing a fresh copy of the first 512 bytes of my /boot partition over to the Windows C partition. So somehow the Windows boot loader decided it no longer liked my original dd'ed file.
The only things I can think of that might have changed and caused this to happen are (on Ubuntu) an update to security packages using the graphical update manager that pops up (I rarely do a command line apt-get upgrade/dist-upgrade and certainly not in this time frame) and (on Windows) a Windows Update - as it is a work laptop I tend to take whatever essential updates it suggests. As you can see I managed to fix the problem. However does anybody have any similar experience or any explanation why this may have happened? Could an over-zealous Windows Update have caused it?
View 4 Replies
View Related
Feb 1, 2011
I tried to upgrade to Maverick (server version) usingsudo do-release-upgradeAll went well, but on the first reboot after the installation the PC hangs with grub prompt:error: the symbol grub_xputs not foundI guess it has something to do with my RAID1 setup:sda1/sdb1..RAID1, bootable (system partition, 20 GB)sdc1 ....swap partition sda2/sdb2/sdc2 ... RAID5 (data partition, 3 TB)I made a bootable (using UNetbootin) USB pen drive with 10.10 desktop on it and booted into this desktop version. Aftermdadm --assemble --scanI could successfully access (and mount) my RAID1 and RAID5 drives. However, the system itself does not boot.
after only having mounted /dev/md0 and browsed in the contents, the boot behavior has changed: now the PC does not end up in the grub prompt "the symbol grub_xputs not found", but instead a blank black screen with a blinking cursor left top is shown. Keyboard: no reaction (I tried Enter, Esc, any keys ... no reaction, just a blinking cursor).Then, I tried:
boot into USB pen drive 10.10 desktop
mdadm --assemble --scan ... result: /dev/md0 is available (the RAID1 of sda1 and sdb1)
mount /dev/md0 /mnt/md0
[code]...
View 8 Replies
View Related
May 25, 2010
Similar problems to mine have popped up elsewhere, but none of the fixes seem to work (or I'm just too stupid). I tried to see what the people at Canonical and elsewhere came up with for Ubuntu 10.4 and, after the live USB checked out fine, I rather foolishly installed the OS on my Acer Aspire One D250 (1GB RAM), to run alongside Windows XP.
It booted up once, I think, and then no more. I believe the problem MIGHT be the Broadcom WiFi stuff, but I'm not sure. Anyway, booting Ubuntu leads to a blank screen with a blinking cursor... which doesn't appear to go away. Recovery mode worked once or twice (had to use ACPI=OFF at least once), then no more. It leads to the same thing: that perpetually blinking cursor.
What I would like is either a fix to get Ubuntu 10.4 launched, or some way to remove the OS and restore my netbook back to what it was. Unfortunately, the MBR fixes that are posted all over cyberspace are useless, as my hidden partition doesn't contain the rtmbr.bin file it needs to work (don't ask me why--I've already posted that question at the AAO user forum). So it seems a fix to launch Ubuntu is the only solution, so that I can at least set grub to launch Windows XP rather than Ubuntu.
View 2 Replies
View Related
Nov 29, 2009
Although I managed fairly quickly to get 3D enabled on the GF 7600GS of my desktop, it took me longer to get 3D up on the GF 9650M GT of my Asus laptop M70Vn. Although I made extensive use of the numerous procedures outlined here, none of them worked and booting my laptop always ended up with me facing a jet-black screen and a completely inexpressive blinking white cursor. My solution was simple: I did not blacklist Nouveau and problems mysteriously disappeared.
View 2 Replies
View Related
Jan 22, 2010
I have an old laptop, and am a basic linux user, but this install is crazy. I know that I have to have acpi=off to work, and got Linux Mint 7 installed from the live cd but want Xubuntu. The Xubuntu 9.1 live CD works fine as long as I put the acpi=off parameters in the boot string, and I check the additional options just to be sure. But after install I cannot even get into the grub, it says grub loading for a split second then blinking cursor
View 2 Replies
View Related
Jun 8, 2011
I was running an update on my computer (running Ubuntu 10.04 Lucid) and something must have been transferred incorrectly as every time I open synaptic, I get an error message that tells me to type a command into the terminal:
Code:
sudo dpkg --configure -a
After doing that, it displays this:
[code]....
View 7 Replies
View Related
May 2, 2010
I installed Xubuntu 10.04 on my Dell laptop earlier, and all went well until I tried to finally login. A dull black screen is presented (I don't know if that's normal; I expected a pleasant splash screen haha). As a windows user, I can only explain it as looking like a command prompt. The first line asks me for my login (which is my first name). I type it in, press enter, and then it asks me for my password. The problem is, no matter what I press, nothing happens after that.
View 6 Replies
View Related
May 26, 2010
Since upgrading ubuntu boots to a prompt rather than logging into gnome. has anyone run into this? what can I do to fix this?
I recently upgraded from Ubuntu 9.10 to Ubuntu 10.4.
does anyone know the command to start gnome from the prompt?
View 4 Replies
View Related
