Fedora Hardware :: External HD I/O Error Renders Directory Unreadable?
Feb 13, 2009
So I'm trying to copy some media from my main hard drive to an external drive.In particular, I'm clicking folders (each containing O(15 GB) in files) and dragging them into a folder on my external HD. Fedora pops up an error message saying there was an I/O error for some of the files I'm trying to copy.So, now, some of the directories copied right, and one seems to have gone haywire. In particular if I navigate to /media/China Disk/TV/Battlestar/ and then run ll, I get the following output
Code:
ls: cannot access Battlestar.Galactica.S03: Input/output error
total 12
I want to share my /home/myname/Public/ directory with other users on my system. The problem I am having is that it seems impossible to do so. I can't use a hard link because it's a directory and I can't use a soft link because the target directory can't be found by anyone unable to read my home directory.
So far, the only solutions I can see are:
1) To move everything from my Public directory to one lower on the directory tree (something like /home/Public) and then symlink to that as /home/myname/Public and allow everyone else to do the same.
2) To use something like samba to share the folder, even if only locally.
is doable because /home and /home/myname are on the same volume but there are times on my system when that is not true (I have users with their home directories on thumbdrives and external HDDs for instance and keeping their public files on a separate volume really isn't an option).
I have a server with Fedora 13 with which I would like to get NFS working. I have looked up multiple howto's and tutorials, but I'm having a problem not addressed by any of them.Official how-to, another how-to, and another how-to.I have verified that nfs-utils, nfs-utils-lib, portmap, and system-config-nfs are installed and running. I have verified that I have, in fact, shared the directory that I want to share, and that the proper permissions are set.
I had to go through some gyrations to get the Belkin wireless N router to allow my server to have a static IP. However, I can ping the server from the nfs client (a toshiba satellite running mint 8), and vice versa. I have (for now) disabled firewalls on both computers. I think I have disabled SELinux on Fedora 13 (for now).When I attempt to connect to the server from the client, the output looks like this:Quote:
aragorn ~ # mount -v 192.168.2.101:/test /home/kelev/test/ mount: no type was given - I'll assume nfs because of the colon mount.nfs: timeout set for Sat Dec 18 12:21:09 2010
I've looked high and low but I haven't been able to find any example of what I'm currently experiencing with my hard disks.First off, I'm running CentOS as a Samba file server, on a Soltek SL-K8TPro-939 and AMD 64 3200+ (all the rage of five years ago). Here's my disk setup
Ok, so I get a notification in my system mail yesterday: The following warning/error was logged by the smartd daemon:
Device: /dev/sda, unable to open device
For details see host's SYSLOG (default: /var/log/messages).You can also use the smartctl utility for further investigation.No additional email messages about this problem will be sent.
I've right now installed Fedora 12 in my laptop, and when I try to acces my external USB Woxter HardDisk I get this error:
Error mounting: mount exited with exit code 12: Failed to read last sector (1953525103): Invalid argument HINTS: Either the volume is a RAID/LDM but it wasn't setup yet, or it was not setup correctly (e.g. by not using mdadm --build ...),
I've got two external drives that are using ext4 that for whatever reason, I just can't seem to write too. I've changed the permissions on the drives using chmod so the permissions are "drwxrwxrwx". I can even right click within the drive and click "Create New Folder" but then it tells me, "Error while copying to "sdc1". The destination is read-only." I thought the destination permissions were setup so anyone can read/write to the disk? I haven't been using linux that long and have only recently started to feel comfortable to move over all of my stuff to Fedora.
I did install FC 11 without problems. The only thing I don't understand is the following.
Viewing some messages, the character apostrophe'is not displayed.Charset is "iso-8859-1" which is the default in my Evolution as well...
Subject:
=?iso-8859-1?Q?SURCOUF_:_Votre_commande_N=B0__6323352_-_Mise_=E0_disposit?= =?iso-8859-1?Q?ion_de_facture?= Date: Fri, 23 Oct 2009 23:14:24 +0200
[code]....
Checking the source of the message I can read at some place :
Le Sp=E9cialiste de l=92 Informatique=0A=
what is displayed without apostrophe as =92 is shown as a blank square (not printable character) On the other side I see the following source in same message :
t=E9l=E9charger directement et gratuitement sur le site de l'=E9diteur =0A=
what is displayed with the apostrophe: I don't know why the character apostrophe is sent as =92 This did not happen within FC 10 or the earlier Evolution
my problem is inkscape-0.48.0-1.fc14.3.src.rpm in fedora 14 64 bittry rebuild --source inkscape-0.48.0-1.fc14.3.src.rpm and this my error:I think something wrong pkgconfig .
attributes.cpp:20:32: fatal error: glib.h: No such file or directory compilation terminated. arc-context.cpp:21:28: fatal error: gdk/gdkkeysyms.h: No such file or directory
I had a set of rather unusual problems on installing a new 500Gb hard drive on my F14 system, I've solved them, but they were that unusual that I thought I should share them in case anyone else gets the same thing! I'd been experiencing intermittent faults on one of my drives, (lock ups for no reason, occasional boot ups that failed due to ' disk unreadable errors' and other odd errors). I assumed that the drive was failing, but it always showed 'Heathy' on disk utility! This was the disk with the OS on, plus my main 'data' disk had some bad sectors, so I thought I'd buy a nice big 500Gb and reinstall the whole system.
I backed up all my data to an external 'USB' drive, opened the case, (a big old under the table 'desktop', why do they still call them 'desktops'?) shoved in the new SATA drive and rebooted, intending to format the new drive to EXT4 and partitioning it before installing F14 again! OOOOOOOOOW! Major drive failure, missing OS, whole list of SDB errors! Control D, to reboot, BIOS only sees one drive; SDA (I have three, two IDE and one SATA) plus the one I just put in makes four. I go into BIOS and discover that it not only cant see any of the other drives, but my two DVD drives are missing too!
Now I've been building my own systems and mucking about with computers since before you could buy them, and Ive never seen a problem like this one! At first I thought the new drive had screwed my system, for on removal, the problem persisted! Then I noticed that the IDE connector in drive SDB, (the long 40 pin job) was just slightly out of line with the back of the drive, pushed it firmly in and what do you know, everything works! We moved recently and I think the vibration was enough to loosen the connector to give intermittent faults, and pulling the cables about to get the new drive in, pulled it out further......
I am running Fedora 14 with the Gnome. The screen size defaulted to 1680 x 1240 mething like that.This was rather small for me so I went to the task bar and clicked on system.ound the app to change the resolution. I chose 1280 x 720. Now, I no longer have the task bar and the text is nearly unreadable.Without the task bar, I cannot find a way to go back to the original size. I also have not had any success finding any way to make the text look better. I tried changing the font and size but that did not have any beneficial affect. Can anyone tell me what will correct the situation?I found another post that mentioned Alt F2 and gnome-display-properties. That let me get back to nearly what I originally had; everything looks good at 1680 x 1050 but the fonts are not quite the same. However, I still have the need to reduce the resolution of the display and maintain readable text and the task bar.
Well, I am facing problem when doing lab questions.
I must use DLXLinux bundled in Bochs (bochs.sourceforge.net).
I am required to use the /usr/local directory.
In /usr directory, there is no directory named 'local' but there is one thing called 'local@'. So, when I try to use mkdir command to create 'local' directory in /usr , there are error "cannot make directory.....".
Code: mkdir: cannot create directory `/dev/cgroup/cpu/user/5900': No such file or directory bash: /dev/cgroup/cpu/user/5900/tasks: No such file or directory bash: /dev/cgroup/cpu/user/5900/notify_on_release: No such file or directory It seems like it's probably from this part of .bashrc:
[Code]...
What does this code do, why, and what's causing it to go wrong?
What is the magic that needs to be done to be able to record in audacity?
- Fedora 15 x86_64 2.6.35.12-88.fc14.x86_64 - SoundBlaster X-Fi card. -I have added rpmfusion to yum repos.
When I start audacity the following is printed to the concole:
Code:
Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started Expression 'stream->capture.pcm' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 3653
I just downloaded Fedora 10, burned the CD, installed the program, etc. Everything went just fine, but after rebooting the screen turns gibberish, totally unreadable. I now it's the video card, NVIDIA but how do I fix it? I installed Fedora 8 which worked just great, no issues. My machine is Intel Core 2 7300, Geforce 9600GT my other machine, is AMD-64 5000, Geforce 9500 GT, same problem happens when trying to install Centos 5.
After boot, Fedora 14 gives the following message, on my HP Pavilion dv2701tx laptop.
Starting udev: udevd-work[454]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/power/level} for writing: No such file or directory
I suspect it has something to do with my Authentec AES2501 fingerprint reader. I need it to work for my project, but it's not working, even though it works fine in the Windows 7 installed on my system.
I noticed (in my couple of days Debian experience) that most of my PDF files renders poorly in Evince. And poorly is gentle word to say, as they are unreadable: So I searched Software Center for some programs and installed XPDF, but this program does not belong in my time perception so I ditched it. Then googling, I found Foxit deb package, which shows fine: but I'd like to use something else if possible on Linux system I did not try to install Adobe Reader as I understand it's bloated and slow program, and I felt nostalgic towards SumatraPDF which I use on my Windows 7 OS. I guess there is no hope for such slick PDF viewer on Linux, as I googled as said, but knowing that SumatraPDF's PDF engine is MuPDF, I just feel sorry that developers prefer only Windows version I'm curious which program, experienced Debian users find appropriate for viewing PDF files
I am working on an application that will convert English text into equivalent Indian language text. Since Unicode is the standard, I will be using it. In most of the western languages each code-value directly refers to the glyph index and placing the code-values side by side will give the required display. This one to one mapping is not possible in Indian languages where rendering syllables is required rather than rendering just consonants and vowels. Many of the complex characters are made up by combining several unicode values.
My question here is: How Linux renders this Unicode text correctly? More specifically, what package is used? I believe in Windows they use Uniscribe for rendering.I believe there will be an operating system library for handling the text rendering. Or do I need to write my own rendering engine? How programs like Firefox, GEdit shows unicode text? Do they also have proprietary engines for correct rendering?
I wanted to give kupfer a try, though I had to build it from source as it doesn't appear to be in the repos. The building seemingly went fine and installed, but I get these error(s) when I try to run the program:
Code: $ kupfer Kupfer: A free software (GPLv3+) launcher Copyright � 2007--2010 Ulrik Sverdrup with others http://kaizer.se/wiki/kupfer/ Error [kupfer.plugin.websearch] OpenSearchSource: [Errno 2] No such file or directory: '/home/snakepc/.mozilla/firefox/z6orlu2l.default/searchplugins'
I am attempting to install Xemacs-21.4.22 on Centos 5.4 and get the following error message when I attempt to... make install
.......... xlwmenu.c:39:28: error: X11/bitmaps/gray: No such file or directory xlwmenu.c: In function 'XlwMenuInitialize': xlwmenu.c:3015: error: 'gray_bits' undeclared (first use in this function) xlwmenu.c:3015: error: (Each undeclared identifier is reported only once xlwmenu.c:3015: error: for each function it appears in.) xlwmenu.c:3016: error: 'gray_width' undeclared (first use in this function) xlwmenu.c:3016: error: 'gray_height' undeclared (first use in this function) make[1]: *** [xlwmenu.o] Error 1
I understand that there are some X11 bitmaps not included in Centos 5.4 however I have no idea how to install them.
I would like to be able to map on my laptop a directory of my Linux server.I try into Windows to map is using \MYIPdirectory name and Its not working.SAMBA is install and working as if my laptop is connected on my home network I can map it using my server name.But I would like to be able to also map it when i'm ouside. Is there any setting I have to add in my Linux server or any software I need to add ?
I have encountered the strangest bug, filled with so many inconsistencies that I am unable to comprehend why or how it is happening. It has only happened once and whilst it seems to resemble another bug that I found when looking for this one, it is fundamentally different. Here are the facts:1. I am using an Acer Aspire One netbook.2. This netbook is running Ubuntu 9.10.3. It has been running Ubuntu 9.10 since the first time it was released as stable.4. Yesterday, whilst I was engaging in an intellectually stimulating debate through the convenience of Pidgin, I encountered the said bug with the following attributes:The keyboard has the appearance of not working.
But if one applies a lot of pressure to each key, one is able to type.This bug is not resolved by a system reset.This bug does not affect my BIOS or even Ubuntu until I log into the particular account where it first happened.When I log out of the account and log into another one, my keyboard is perfectly responsive.When I log back into the "damaged account", the keyboard is once more unusable.The right click menus do work, in stark contrast to another, similar bug, the report of which I encountered in my search for this one.So, clearly, an undesirable workaround would be to migrate to a new user on my system. This, however, does not change the fact that I do not wish to do this another time if the bug repeats itself. Furthermore, if it is only active in a session of the "damaged account", it is likely that it is a configuration error of sorts, no? I have another strange configuration error on that account. The little icon that allows me to choose to which wireless network I wish to connect is random in when it chooses to appear or not, although the service is active (as I am greeted with a message directing me to click on the non-existing icon in order to select the network...). Yet again, this only happens when logged into a particular user, while other users seem completely unaffected.
What I conclude from this is that Ubuntu's configuration system is pretty erratic and it makes seemingly random yet seemingly irreversible changes to user configuration. I would not even know where to start when faced with reading through different configuration files. Furthermore, I would feel as though my PC were constantly working against me. It is a strange feeling, when I bought it with the intention that we might work together.
After doing the standard sequence to go from 10.4 to 10.10 beta, the system is now unusable.There are no icons and no thees. The GDM login shows a big question mark where a graphics would normally be.When I log into the session, I get nothing: no desktop, no panels. Alt+F2 does nothing, so I can't even launch a terminal that way.After starting a terminal from a virtual console, I can start looking at what's wrong. Metacity crashes right awaywith:metacity:ERROR:ui/ui.c:752:meta_ui_get_default_window_icon: assertion failed: (default_icon)Aborted (core dumped)
My mom's computer is no longer bootable. I was thinking of attempting to fix it later on this week and am thinking of doing a chroot and updating via a live CD hoping that an even newer update solves the problem but I have some doubts of success. Does anyone have any information about this issue so that I can be better prepared to fix it? Also, I thought I should mention that I tried the second newest kernel to see if that would make it work. It didn't. The error is something along the lines of having the /dev/diskuuid change. If I'm correct, Ubuntu changed the disk's name and is trying to boot the old name. It's dropping to an initramfs shell (not the regular terminal where you can work miracles ).
I am currently using slackware-current with fluxbox is my window manager. I aim to have a light weight environment. But xpdf renders pdf very slowly. Are there any one having this issue before. As alternative, i have to install wine and use Sumatra PDF.
