Fedora Hardware :: ATI Radeon HD 5770 - Distro Not Compatible
Oct 12, 2010
I'm a new Fedora convert. I installed core 13 x86_64 and everything seems to be working fine. The default drivers auto-detected my dual monitors and set up an extended desktop, with the correct resolution. I do not, however, have 3D support, and the proprietary driver from ATI's website will not build. I have the ATI Radeon HD 5770. It says that my distro isn't compatible. Is this true? Do I have no 3D support options.
View 3 Replies
ADVERTISEMENT
Sep 4, 2010
I've been trying to get my Sound set to 5.1 surround for two weeks now and for some reason Ubuntu only shows Digital Stereo.
ATI Radeon 5770
Ubuntu 64bit
When I go to System > Preferences > Sound the Output tab only gives me the option of Digital Stereo.
Code:
View 4 Replies
View Related
May 19, 2010
Does anyone know of a similar easy to use interface for over-clocking with ATI cards?
I found this one that works with nvidia but haven't had much luck finding any others:
http://www.econowics.com/linux/298/t...-ubuntu-linux/
View 6 Replies
View Related
Jun 15, 2010
The following is my system:
AMD Athlon II x4 620 2.6Ghz
4GB DDR2-800 DC
Radeon HD 5770 1gb
Ubuntu 10.4 LTS, latest proprietary drivers.
On GLXGears, I only get 12k fps. This seems very low, especially considering the fact that my Acer Aspire One laptop gets 1-5k scores on a POS Intel GMA 950.
View 1 Replies
View Related
Mar 20, 2010
I just installed OpenSUSE 11.2 x86_64 on a new computer with ATI Radeon HD 5770 graphics card. I have included ati in the update repositories. I saw that x11-video-fglrxG02 and ati-fglrxG02-kmp-desktop are NOT checked, so, I selected both in YAST2, then, OpenSUSE started to download the required files. but, in the middle of downloading, I got a "wrong digest", said that ati-fglrxG02-kmp-desktop has wrong checksum.
View 4 Replies
View Related
May 27, 2011
I'm trying to install radeon 5770 drivers but it fails with this message.... same message when I use sgfxi
Code:
# vim /usr/share/ati/fglrx-install.log
1
2 Creating symlink /var/lib/dkms/fglrx/8.85/source ->
[Code]....
View 3 Replies
View Related
May 24, 2009
I been searching for months on how to get the s-video to work on my pci VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] card. I found a site with instructions.
This is how I got it to work.
I install Debian 5.0 Lenny Desktop
added the Driver "radeon" to my /etc/X11/xorg.conf file
This work and I was able to use my tv as a monitor however when I try to play a video file from totem or vlc all I could get was audio with no video; These files work and played fine in the CRT monitor.
View 2 Replies
View Related
Mar 2, 2011
I just upgraded my rig from a 4770 to a 5770 video card.
My 4770 had basic 3d support out of the box with the open source radeon driver. My 5770 doesn't seem to (basic rendering only with no compositing), although this page suggests it does:
[URL]
Is there anyone out there who is running a 5770 or knows how I can upgrade to a newer version of the open source driver? I'd rather not use catalyst (Id don't game with ubuntu) and I found the open source driver to be quite nice.
View 2 Replies
View Related
Apr 4, 2010
I replaced an ATI Radeon 9550 with a Radeon X1300/X1550, in hopes of better performance.
My System: P4@3GHz, 1.5Gb RAM, Fedora 12, kernel 2.6.32.10-90.fc12.
Faults: Screen refresh is extremely low. Glxgears outputs 25 FPS. Dragging windows around is sometimes really slow.
What I did so far, in hope of fixing it:
1. Installed 'system-config-display', for providing an xorg.conf
2. Did: yum --enablerepo=rawhide update mesa-dri-drivers-experimental mesa*, fixing this, but to no avail...
I cannot find any errors in the log...I don't know what to do...
I am posting my Xorg.conf, Xorg.0.log and Glxinfo through links to pastebin.com
POST UPDATE:
When running GlxGears, I get a bit of motion, and then the gears freeze for 1 second. And this goes on and on. But...if I move the mouse around, I get 1100FPS!
Now I messed a bit with xorg.conf and the "SWCursor" Option, but the above happens when this option is on "true". On "false" there is no 1100FPS, only the freezing loop...
View 1 Replies
View Related
Jul 31, 2010
how can I check if my graphics card's driver is installed. And if not, how can I install it and where can I download it?
View 3 Replies
View Related
May 9, 2010
It seemed to upgrade the first round and looks like it booted back into Ubuntu (I had Purple background) and asked for updates and I installed them and on reboot I lose video when entering desktop. I see the initial purple Ubuntu loading screen, but when it goes away I lose video completely and my monitor says it's unplugged.
I tried the grub nomodeset without luck. I am at the desktop in safe mode. If someone can tell me how to edit a file to enable the graphics again, I'd be forever grateful. Sorry if this was answered, but search only gave me help with the Intel 850 graphics problems and not what I was seeking.
View 1 Replies
View Related
Sep 5, 2010
Does anyone know how to install the video driver for a ATI HD5770 video card in 10.04? It was working, some recent update screwed it up, now I cannot reinstall it. What do you have to delete in order to fully get rid of the remnants of the old driver?
What packages have to be installed before or after though Synaptic? Are you supposed to install it by downloading the driver from ATI and SHing it? Or are you supposed to go though System->Hardware Drivers?
View 9 Replies
View Related
Aug 30, 2010
New machine with an ATI 5770, with a fresh install of Ubuntu 10.04 (lucid, 64-bit). What a mess! As reported elsewhere, the initial install sometimes came up with a black screen, or corrupted displays, different each time. After several retries, I had a display that was corrupted but barely readable. The installed Ubuntu booted, but also had a corrupted display, just barely readable. I was just able to make out the hint that I should use the proprietary drivers, so I booted into safe mode and enabled them. Afterward, the display came up correctly.
This is ok for me, as a long-time Ubuntu user. But it really is like a trip back to the bad-old-days of Linux: you really cannot expect anyone but a geek to get through this. And the is the LTS version of Ubuntu? I use two monitors, to provide a double-wide single desktop. When I log in, the second monitor displays random noise, and is entirely unusable. I have to use System-Preferences-Monitors to switch the second display off, then switch it back on, and then everything works fine.
View 5 Replies
View Related
Jan 11, 2011
Last night I was playing around with my system trying to install newer ATI drivers for my ATI HD 5770 on Ubuntu 10.10 x64. In my ignorance I downloaded the latest package from the ATI website and installed them directly over the drivers already running (...which were installed through the restricted software application). This caused a noticeable graphical slow down.
To correct my bad driver install I removed the downloaded package using the uninstall .sh found within ATI's wiki. However, the video performance did not improve. I then also removed the fglrx install through the repository, thinking this would revert me back to open source drivers upon reboot; Similar to how Windows reverts back to the OS driver when all 3rd party drivers have been removed.
However, this did not work as planned. On reboot I was presented with a 'no signal found' error with my monitor after viewing the Ubuntu splash screen (which does still display, oddly). After which I rebooted and attempted attempted a low graphical boot through the recovery menu, with the same result. Returning to the recovery console, I attempted to simply reinstall the fglrx driver
[Code]..
I am at wits end. Is there anyway for a newbie such as myself to recover from this double driver install/purge/etc? If not, is there a way to re-install the Ubuntu O/S files, but leave my installed programs/config files in place? While I know I can boot to a live CD to backup my content and reformat, it does take a very long time to move 500Gb of data between two drives.
View 1 Replies
View Related
May 14, 2010
I upgraded from 9.10 to 10.4 and I get the black border around my desktop. I can't find the scaling option and tried installing the proprietary drivers within Ubuntu and still nothing.
View 4 Replies
View Related
Apr 24, 2011
I need to know what is compatible version of Fedora I need to install for build program thats can be run on RH 5.5 or 5.6 without upgrades. I know that RH6.0 built from FC12-13. So can I take FC10 and will be insured that it is right choose?
View 6 Replies
View Related
Sep 17, 2009
Ok so was looking through a guide and stumbled on this: ppc --> 32-bit, compatible with all Macintosh computers (excluding Intel Macs) and the PlayStation 3. Does this mean that if I have some old Macs (G3s) to be precise I could put Fedora on it? Does this involve a whole lot of hacking or not?
View 3 Replies
View Related
May 23, 2011
setup amd64bit created a live DVD of the 11.4 64 bit burn pope inside went to install put selected the second option because putting it on a 60G vertex ocz super fast drive. used the entire drive for ubuntu. have mirror dual monitor installed the proprietary drivers from amd.go to Ubuntu software center type additional drives install and install the proprietary drivers from ati you should be able to figure that out then lauch the ati catalyst control and setup your 1 and 2 monitors so that they are correct.
ok now install Wine ubuntu software thingy tip wine don't do the beta right now im stuck on installing starcraft and mounting the other hard drives will get back to you and make a better guide on this.oh by the way if your Internet isn't connecting automatically you might need to set your IPV4 setting manually this is because you have set your router with DHCP disabled. Code needed for install:
nautilus $HOME
PLAY ON LINUX is working for SC2 Sois crashes though and during install sont font was missing neede to guesse correct button to install.
More useful code
To mount the drive ro (read only):Make a mount point.mount First open a terminal.Then type these commands (assuming the partition is /dev/hdb1):
Code:
sudo mkdir /mnt/music
sudo mount /dev/hdb1 /mnt/music -t ntfs
Note: if the partition is not /dev/hdb1 you will need to adjuxt accordingly.To make the mount automatic at boot you need to edit fstab:
Code:
sudo gedit /etc/fstab
Add this line:
Quote:
/dev/hdb1 /mnt/music ntfs auto,users,ro 0 0
Again, adjust your partition accordingly if needed. Copy and paste the contents of /etc/fstab (in your next post) and type in a terminal "sudo fdisk -l" (w/o quotes) and copy and paste the output.
[code]....
View 3 Replies
View Related
Dec 19, 2009
There's a new version of ATI driver (9.12) Is it compatible with Fedora 12?
View 14 Replies
View Related
Feb 23, 2010
Is there anyone who knows any free registrars compatible with linphone?
View 1 Replies
View Related
Jul 13, 2010
I'm trying to compile ink but with no luck. Here are the terminal output,
Code:
[trumpet@Trumpet-PC ink-0.5.1]$ ./configure
checking for a BSD-compatible install... /usr/bin/install -c
[code]...
View 6 Replies
View Related
Sep 6, 2010
If I were to get a new graphics card for my computer so it is fully compatible with linux. My budget is not over 170 dollars. These are the details of my computer....
Hewlett Packard company
Compaq Presario
AMD Athlon 64 Processor 3500+
2.20 GHz, 2.00 GB of Ram
Motherboard Info. [URL]
Video Card- for more info [URL]
Radeon X700 series
Radeon X700 series secondary
View 6 Replies
View Related
Dec 5, 2010
I just want to know if Fedora 14 is compatible with AMD M880G graphics card.Fedora 13 did not work.
View 2 Replies
View Related
Feb 28, 2011
Are there any maintenance programs I should download and run on Fedora ? Example ccleaner and defraggler for windows?
View 11 Replies
View Related
Jan 9, 2010
nominate a disastrous distro from past or present that was simply AWFUL and what exactly was so bad about it?
View 14 Replies
View Related
Sep 6, 2010
I have a linux box set up as a multi-purpose server for my home with three Windows client PC's. The linux box is based on a slightly modified Slackware 9.0 distribution using Linux 2.4.20 and an unfortinately old, slow AMD processor with a miserable 512Kb RAM. The linux box serves the CIFS file system to the Windows boxes, runs the SQUID HTTP proxy, the Apache web server, a print server, does masquerading, mail serving and a very effective firewall using iptables.
This system, although slow, has run perfectly for several years.Let me say that again - This system works perfectly.I had decided that now is the time to upgrade the hardware, so I bought a Gigabyte LGA775 motherboard which has two 1Gb network interfaces on it, an ASUS 256Mb PCI-E display card, 2Gb of DDR3 RAM, an Intel Core2-Quad processor and a bunch of 500Gb SATA drives to set up a RAID5 array (but I intend that the system boot off one of several 40Gb PATA drives I have).I set up the processor, motherboard, display card, RAM, a SATA DVD Drive and a 40Gb PATA hard disk in a "breadboard" layout and installed distro 13.1, being careful to set up the static IP for the local network, dhcpcd to get an IP address from the cable modem (my internet connection) and to enable ip_forward in the network configuration.
Then I installed a script invoked by /etc/rc.d/rc.local which installed all the SAME iptables rules as my old Linux box. There was one minor glitch when I had to change 8 occurrences of "-d ! $LOCAL_NET to" "! --destination $LOCAL_NET" but that was no problem. I also set up /etc/resolv.conf, /etc/hosts , the BIND server files etc. etc. exactly as in the old box.
I am able to ping mirror.aarnet.edu.au (this is at the heart of Australia's internet hub network - if it's down the whole bloody thing is down) and have the system find the correct IP from the designated nameservers and contact that server with a return trip time of 35ms. I am able to run a telnet session from one of the Windows boxes and edit files on the Linux server. So both network interfaces work and I've got them the right way around.I am able to run FTP on one of the Windows boxes and connect through to mirror.aarnet.edu.au, although it seems to hang when I try a DIR (but then so does the old linux system).
View 83 Replies
View Related
May 11, 2009
I'm facing this problem since a month on Fedora 10. I have some 45 packages for upgrade through KPackageKit which belong to KDE.
While I give it to upgrade, it gives me a strange message which says
Multiple packages exist that are not compatible with each other.
This is usually due to mixing packages from different software sources.
When I press the details button, I get these details.
ERROR with rpm_check_debug vs depsolve:
libkwalletbackend.so.4 is needed by kdebase-runtime-4.2.0-7.fc10.i386
Please report this error at [URL]
I get this message only for the KDE packages. I have libkwalletbackend.so.4 in my /usr/lib directory.
View 1 Replies
View Related
Dec 14, 2009
After yum -y update I get this at the end of the process. What should I do, have no idea...is it mandatory to erstart with right kernel for each package?
Running rpm_check_debug
ERROR with rpm_check_debug vs depsolve:
kernel-uname-r = 2.6.27.21-170.2.56.fc10.i686 is needed by (installed) kmod-ndiswrapper-2.6.27.21-170.2.56.fc10.i686-1.53-5.fc10.17.i686
kernel-uname-r = 2.6.27.21-170.2.56.fc10.i686 is needed by (installed) kmod-wl-2.6.27.21-170.2.56.fc10.i686-5.10.79.10-2.fc10.i686
[code]....
View 7 Replies
View Related
Mar 24, 2010
I have a Dell PowerEdge 840 that has no sound card. I would like to install a completely compatible sound card. I have not been able to find any recommendations for compatible sound cards on these forums, but I have learned that the C-Media chipset is supposed to be well-supported by Linux. There are C-Media sound cards on e-bay for under $10. I was considering a 6ch c-media 5.1 surround sound 3D PCI sound card. I believe the chipset is CM8738. Does anyone know whether this card is supported in F12? Or does anyone care to share any recommendations for sound cards that are known to be compatible with Fedora 12?
My intention is to be able to install a decent, inexpensive, commodity sound card that is known to be compatible with Fedora 12. I would prefer to purchase and install one that I know works rather than guessing and then fiddling with it forever and asking a lot of questions that could have been avoided.
Surprisingly, this information has been very hard for me to find. I understand that there is no Fedora hardware compatibility list, but it seems that a very brief list of hardware that is know to be compatible with the most recent release or two of Fedora could save a lot of time and resources. The purpose of such a brief list wouldn't necessarily be to see if a certain piece of hardware is compatible, but to find a component that is know to be compatible, so as to easily be able to get a completely functional system up and running.
View 5 Replies
View Related
Jan 20, 2011
I have been searching for a while for a program to convert .flac files I rip off of cd's with my laptop (running Fedora 11) to a usable iTunes format for my desktop (running Win XP). The cd drive on my desktop is currently broken, so my fix of ripping on my desktop, then using Rhythmbox on my laptop is temporarily unavailable.
Any suggestions? I've tried audiokonverter, soundconverter, audio-convert-mod and each come up with errors or wouldn't install.
View 8 Replies
View Related
