Whenever I try going into "Desktop effects" it says:
Accelerated 3D graphics is not available
Desktop effects require hardware 3D support.
I'm guessing this is a driver issue? I tried installing a driver for it, I think it was Catalyst but it didn't really work.
I recently bought a HIS HD 4670 IceQ card but can't get it to work in openSUSE 11.2 Under Windows the card works fine, so I assume there is no hardware problem. I tried this card in two computers with different mainboards, but it does not work. Several times I reinstalled openSUSE completely from scratch (tried both 32bit and 64bit versions) but no luck. The problem: Right after the installation it uses the radeonhd driver. This basically works, but without 3D (no Tuxracer...) and even 2D is slow (dragging around windows on the desktop is slow, page scrolling in firefox also).
Then I tried to install the ati proprietary driver, both from rpm (the rpm's from the "official" ati repository have a checksum error, as already mentioned in another thread!), and by downloading the driver from AMD and running the install script. The install script seems to work successfully. The kernel module is compiled and loaded. "aticonfig --initial" makes a rudimentary xorg.conf. But then, when starting X, it does not work:
- on one of the 2 tested systems, even kdm does not start, the screen simply stays black with a frozen cursor top left, even CTRL+ALT+backspace doesn't do anything - on the other system, kdm starts and shows the login screen, but when trying to start KDE kwin crashes, and the windows have no title bar (when I googled for this symptome I found lots of people also having this problem...) - trying to configure the system using sax2 didn't help, even sax2 doesn't display properly I have now spent 4 days trying to get this to work and now I'm really tired of those buggy graphics drivers, be it proprietary or open source...
Can anyone recommend me a graphics card that is approximately as powerful as the radeon 4670 (I bought this card because it is said to be the most economical card (both in price and energy consumption) that allows to play Anno 1404 reasonably well on windows), but is known to work in openSUSE 11.2, even in 3D mode (tuxracer...)?
The 3D acceleration of my Radeon 4670 doesn't work and I want to fix it. I have installed the drivers like in the sticky explained and also tried it one time with disabled AIXGL and Composite. I use Fedora 13.
Here are my "xorg.conf", the "LIBGL_DEBUG=verbose glxinfo" and my "Xorg.log"
xorg.conf:
# Xorg configuration created by livna-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection .....
Xorg.log:
But it seems like it can't be opened...
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 30.323] (EE) fglrx(0): Cannot shmat() low memory
[ 30.323] (EE) fglrx(0): em) error: Permission denied
[ 31.984] (EE) AIGLX error: dlopen of fglrx_dri.so failed
[ 31.984] (EE) AIGLX: reverting to software rendering
I tried this: [URL] to install my Radeon HD 4670's graphical drivers but it actually didn't work. I rebooted my computer and it says that the driver is not found and it makes the OS run on low graphics mode. I'm pretty new at Linux and running Ubuntu 10.04 Lucid Lynx. I'd like to know either how I could make my thing use the default driver for my card (with which I was able to put the extra visual effects...) or how could I install the thing properly...
View 6 Replies View RelatedI just updated my box to 11.3. And now when it starts, it goes to runlevel 3 which means the X server is not working. I'm using Radeon HD 4670. How do I configure X from runlevel 3?
View 9 Replies View RelatedI want to get Debian stable working on an iMac 11,2 (previous model):
1/ Same problem as this one, but I solved it by installing the fglrx-driver
2/ New problem: magic mouse and wireless keyboard don't work - solution: install .38-kernel from backports
3/ New problem: fglrx for .38 requires linux-headers.38 requires linux-kbuild.38...
So again stuck with the vesa-driver. I'm quite happy with the wireless mouse and keyboard working, so I'd rather stay with linux-image.38.
Two possibilities:
1/ I get the radeon-driver working
2/ I get the fglrx-driver working
I'd prefer the first method, but as you can see in the log (infra), there's a version mismatch between the kernel and the radeon-module. Any ideas how to get around this?
Using the radeon-driver gives me the following EE's in xorg.0.log.old:
(EE) RADEON(0): [dri] RADEONDRIGetVersion failed because of a version mismatch.
(EE) RADEON(0): Acceleration initialization failed
(EE) RADEON(0): clock recovery failed
(EE) RADEON(0): channel eq failed
(EE) GLX error: Can not get required symbols.
The las error is also shown as the only error when I use the VESA-driver; so clearly that is not the problem. I have tried without an xorg.conf, and the following xorg.conf won't work either:
Section "Module"
Load "glx"
Load "dri"
EndSection .....
I also tried the radeonhd-driver, but that doesn't change anything.
I tried to install the driver using the easy and hard way, but unfortunately I couldn't install it. When the file manager opens up through terminal after I type in the command using super user mode, I select the downloaded file and it opens it up in kwrite.
View 9 Replies View RelatedI bought this Radeon 4670 [URL] to improve my video. Although the description on ATI-AMD webpage [URL] specifies that this card can output up to 7.1 audio through HDMI, Sound Controls only shows the stereo and off option. ATI Catalyst does not have any controls for audio. Is there a way to get 5.1 audio enabled? Using 10.04.
View 8 Replies View RelatedIt has ATI Radeon HD 3000 Graphics. Will that work with Fedora 14? Will I need to install a driver to get it to work? If so, where would I download that driver?
View 4 Replies View RelatedI am thinking about buying a new computer. It has ATI Radeon HD 3000 Graphics. Does Fedora 14 support ATI Radeon HD 3000 Graphicst? Will I have to install a driver and if so where would I download the driver?
View 4 Replies View RelatedI am trying to use an ATI Radeon x300 graphics card with my current system setup with fedora 12 but i am having an openGL issue. I am trying to create a 3D model using comsol and i get an error like:
Failed to initialize 3D graphics. OpenGL not fully supported.
This is a hardware/software issue with the graphics card... not the program COMSOL. How could i enable openGL support to correct this issue?
I had a problem with OpenGL on my computer (I run Ubuntu), and so I created a thread here: [url] but it turned out that the problem was with my graphics card, so I made a new thread at the Ubuntu forum at [ubuntu] Problem with OpenGL in Ubuntu - Ubuntu
View 4 Replies View RelatedI can't install my graphics card Radeon HD 3200, I use the same driver as I always do. But this time it did not work, it boots with an X error and I can't get into gnome.
Here is the Xorg log.
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.29-dsa-ia32 i686 Debian
[Code].....
I've recently managed to install 11.4 with both Gnome 2.32 and KDE 4.6, moving from 11.3. However, there seems to be a significant speed degradation in terms of opening applications, switching windows, clicking on links etc. I have installed the Radeon graphics drivers from YaST, without much success. IMHO, Gnome seems slightly faster than KDE; however, it's still not great.
My machine worked well with 11.3 and seemed to be going pretty well; however, I wanted new and shiny, so. The PC has an AMD dual-core chip (can't remember the exact spec). Alternatively, is there good benchmarking software I could try to see if I can get an idea of my real speed?
we are considering to purchase a laptop that comes with the ATI Mobility Radeon� HD 5430 Graphics Card with 512 MB Ram but unable to get a test with a live cd know /using this card and can confirm that it is working okay with linux?
View 4 Replies View RelatedI've upgraded (reinstalled) from Slackware 13.1 to 13.37 on an old iMac and have problems with slow graphics.
lspci says this about the graphics card:
Code:
With Slackware 13.1 I had no KMS enabled and graphics speed was okay. It wasn't very good, but okay for everyday work. Now with 13.37 it's extremely slow. glxgears runs with only around 38 fps, no matter what I do. And every now and then when logging off, I get a black screen and no new kdm-login. But I can ssh into that machine and restart X by issuing 'init 3;init 4'.
KMS is enabled (I've also tried disabling it, but then KDE crashes right after logging in) and it's a fresh installation of 13.37 with a 2.6.37.6 kernel.
What can I do?
I have to admin I don't know this video and X stuff very well and I used to have machines with NVIDIA cards.
If there's anything else than the usual Xorg.0.log needed.
To me the log doesn't look like there's any problem whatsoever:
Code:
I have an Acer Aspire TimelineX 4820TG. I'm running Wheezy and I can't seem to get switcheroo working correctly. I was running Squeeze, then upgraded to Wheezy because it had a kernel over 2.6.33 with switcheroo built in. Below is the layout of my build...
(~)$ uname -a
Linux skipjack-debian 2.6.38-2-686 #1 SMP Thu Apr 7 05:24:21 UTC 2011 i686 GNU/Linux
(~)$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
01:00.0 VGA compatible controller: ATI Technologies Inc Redwood [Radeon HD 5600 Series]
[code]....
I'm having some graphics driver trouble on my Lenovo Thinkpad T500. I tried getting the ATI Proprietary driver to work (fglrx) but everytime I boot my X just crashes. Now I'm trying to use the open source driver, but i dont think its working becaues a) It doesn't detect that an external monitor is plugged in (for dual-view) and b) when i run glxinfo i get a "Error of failed request: BadRequest" message.
View 3 Replies View Relatedfind the manuel download for my radeon 7500 graphics card. I'm having a hard time finding it. Also, please look, at this other thread, I'm having a big problem: [URL]...
View 1 Replies View RelatedI just got a free Ubuntu 9.04 desktop cd in the mail today, but I'm already having a problem.
I'm using Ubuntu 9.04 Desktop 32 bit. I need graphics drivers for playing video games such as Nexuiz. My graphics hardware is in ATI Radeon X1200 series. The fglrx driver I downloaded from ATI does not install.
When I use code...
I'm having a few problems with XOrg freezing while playing World of Goo (not the worlds most intense game for graphics, but seemingly too much for my rig). I initially posted on the developer's forums, but they said a full X freeze wouldn't be the game. Testing with BZFlag got me a full Xorg freeze even quicker than with WoG. Later I even tried glxgears to see how well it ran and even that froze the system! My only way of recovering is SysReq-REISUB.
Specs/system details:
2.4GHz Core 2 Duo (E6600)
2GB RAM
Radeon X1950XTX using the open source drivers
openSUSE 11.2 (64-bit - patched up to date and without an xorg.conf)
[code].....
So, is there a fix for the huge instability with 3D graphics, or am I stuck between a rock and a hard place with the options of outdated official drivers that may not work with the latest kernels (and would need manually rebuilding even if they did) or flakey open drivers that are guaranteed to freeze at some point, it is just a matter of when?
I'm using openSUSE 11.4 on a HP Pavilion laptop, and it was working fine until last week or so. A zypper update seems to have upgraded to a package with a nasty bug though: it now boots into a black screen, instead of showing kdm.And the only option after that is to forcefully shut down the machine;ither Ctrl+Alt+F1 nor Ctrl+Backspace nor Ctrl+Alt+Del does anything. Not sure if this means the kernel hangs,or just that X blocks all keyboard input as well.The issue with powering off with the hardware button is that I don't get full log files (especially kdm.log) so it's a bit hard to investigate...I have tried many things, here are the results:
* Default radeon driver + kdm = black screen
* nomodeset + radeonhd driver + kdm = black screen [driver doesn't support HD4200 anyway]
* nomodeset + radeon driver explicitely requested + kdm = black screen
[code]...
I have an ATI Radeon 9000 Graphics card that Ubuntu 9.10 doesn't seem to recognize no matter what I do. Knowing that its an older card and that ATI stopped support for it a while ago, I was wondering if anyone knows if I would have better luck on Ubuntu 8.04. I can't get 3d or opengl to work, or install the correct ATI Driver.
View 2 Replies View RelatedSo Ubuntu had been working great in Lucid, and when I upgraded to Maverick the support for my graphics card stopped. It has the proper driver ("ATI/AMD Proprietary FGLRX graphics driver") active and fglrx, fglrx-amdccle and fglrx-modaliases are all at 2:8.780-0ubuntu2. I also have the xorg radeon package installed. Yet, whenever I try to enable desktop effects (to get compiz to work) it says that Desktop effects could not be enabled.
View 4 Replies View RelatedInstalled Ubuntu 10.10 on fresh HP dm4-1050so laptop and encountered problems, this is one of them. Noticed that ATI card is heating heavely with default installation and I would like disable it and switch to use Intel's GMA. Also tested ATI proprietary fglrx driver through Administration->Additional Drivers, after booting got empty screen so I switched back. Afterwards read from documentation that 5450 is not supported, so no wonder. So what is the simplest way of disabling ATI and using only Intel's gma? Here's what I got with lspci -v:
Code:
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device 1469
Flags: bus master, fast devsel, latency 0, IRQ 45
Memory at c0000000 (64-bit, non-prefetchable) [size=4M]
[Code]...
I'm having problems with my graphics. I have ATI mobility radeon hd 3650 and I get an issue with desktop effects. They can't be enabled even though the card is supported. I had some trouble with installation and used this thread's instructions: http://ubuntuforums.org/showthread.php?p=9133906. I finally seem to have it installed and configured but I still can't use desktop effects. Also this whole process started because I couldn't get minecraft working getting the GLX13 error.
View 1 Replies View RelatedI've found that whenever I play a 3D game on Ubuntu, the graphics go crazy and make the game unplayable. I've found this an various games such as SuperTuxKart and Alien Arena.By the way, I'm running an ATi Radeon Xpress 200 (integrated graphics) with the default Ubuntu drivers.
View 3 Replies View RelatedI am running Squeeze on an older Compaq EVO laptop with radeon graphics.
A few months ago, after an upgrade, suspend and hibernate stopped working. The suspend or hibernate worked fine, but the resume just hung with a black screen. I finally got around to looking into it and found a workaround.
The workaround is to disable Kernel Mode Setting for the radeon. This can be done by adding the boot parameter "radeon.modeset=0" or by editing /etc/modprobe.d/radeon-kms.conf so that it includes the line "options radeon modeset=0".
If you are interested in the details, you can search for problem reports related to radeon kernel mode setting.
I've set up this new PC, the graphic card I picked is the ATI R7 260X, pretty good card with lots of core processors, high clock and 2GB memory. I'm now currently using the 14.4 catalyst drive, it works actually alright, though, there are some mishaps with this driver:
First my hdmi screen had scale down, leaving black borders around, even though the catalyst control said the correct native resolution, this turned out to be a underscan that fglrx does and I've finally managed to fix it. Other caveat is that the screen simply won't suspend or turn off( via software), DPMS actually works, forcing it turns the screen blank for some seconds but something does not allow the screen to sleep.
Performance wise it seems pretty good though, everything is pretty smooth, being able to play games maxed out on resolution and ultra settings, though, I still haven't tested out that many games.
The open-source radeon on the other hand, well its open-source, fully xorg and linux compatible, which is a major plus point. It seem it has come a long way, supporting lot of features and providing better performance in some cases.
Before installing Catalyst I had issues with mesa and steam, steam would complain about not finding the 32bit libraries, this is however a steam runtime issue, maybe it could already be fixed.
I just lost my weekend trying to install Xubuntu 10.04 on my pc I made the ps a while back - its built on a ASUS P4S800D-E motherboard and it has an ATI Radeon 9200 LE graphics card. It has a PS/2 keyboard and mouse, 1Gb of memory and a 160Gb PATA/IDE hard drive (I unplugged the SATA drives) Every time I installed or made a tweak to the config it failed in the same way. It showed its failure by continually repeating the first character typed. Regardless of whether this was the password screen for synaptic or just the first character typed into a terminal. Until the first character was typed the mouse seemed to work ok but then it would stall too
I've tried most things, running Xorg with/without an xorg.conf file, loading the ppa kernel and tweaking loads of bios and grub boot parameters all to no avail. So I think I want a more linux friendly graphics card and I fear I may need a new motherboard. Can someone recommend a replacement graphics card for this motherboard? Can anyone reassure me that my motherboard is ok with linux?