Fedora :: F13 - Cannot Login As NIS User By Using Gnome Or GUI
Sep 24, 2010
I have a problem concerning about NIS. I have set-up a NIS client, but I am not able to login as NIS-user by using GNOME or KDE login GUI. However, I was able to login as NIS-user by using a terminal that's open from a local account or root. Also the NFS seems working as well. This problem only occur on my new FC13 pc, and I don't have this problem on my FC10 pc. Both of my FC13 and FC10 PC have the same NFS and NIS setting.
View 8 Replies
ADVERTISEMENT
Aug 8, 2010
I have a network set up that has been working for around a year with no problems but has now developed a login problem. The system was set up with a main server with all users on it and another PC located elsewhere that people could log onto using there personal login and password that then gained access to the account on the main server. This remote PC has now got the problem. When you try to log onto an account it comes up with the message "your session has lasted less than 10 seconds. If you have not logged out yourself this could mean there is a installation problem or that you are out of disk space."
Error message says that no profile for the user can be found and it couldnt create per-user gnome configuration directory. I can log on as root onto the remote PC as it is obviously a local account but all the account on the main server are not accessible. From the root account I can see that the connection to the server is OK and I can actually log into the accounts on the server using the failsafe session so the physical network is OK.
I never built or designed this set up and to be honest I normally work with windows so its all a bit strange to me. Both PC's run Centos 5. I have checked the messages log and there doesnt seem to be any indication of a problem. Just that it stopped connecting from the remote PC. The accounts are all active on the main server itself and have no problems being accessed.
View 3 Replies
View Related
Oct 15, 2009
Does anyone know a secure method for starting a service after a user logs in to the desktop environment? There are a couple of issues that I'm trying to work around / troubleshoot and this would assist with doing that.
I'm running Fedora 11, not sure if that matters for this question.
View 14 Replies
View Related
Jan 16, 2010
I'm wondering if there is an option to not show specyfic user on login screen in my gnome desktop - so f.e. I've got 3 users: "a", "b" and "c" and I want only "a" and "b" to be shown in login window.
View 4 Replies
View Related
Mar 23, 2010
I am running FC12 64bit on my desktop and the problem is that after I enter my credentials at graphicall login screen (Gnome) the computer hungs i cannot moove the mouse, CTRL+ALT+DEL won't work the Caps and Scroll lock on my keboard are blinking. Nothing responds. I am absolutelly cluless. Untill yesterday i was using FC12 i686 and never had this problem, but i got 4GB ram so in order to get those fully i installed the 64bit version. On clean install of the 64bit ver everything went fine, but i updated the system and followed theese instroctions [LINK]http://www.howtoforge.com/the-perfect-desktop-fedora-12-i686-gnome[/LINK] and that's all
View 13 Replies
View Related
Mar 23, 2010
I am running FC12 64bit on my desktop and the problem is that after I enter my credentials at graphicall login screen (Gnome) the computer hungs i cannot moove the mouse, CTRL+ALT+DEL won't work the Caps and Scroll lock on my keboard are blinking. Nothing responds. I am absolutelly cluless. Untill yesterday i was using FC12 i686 and never had this problem, but i got 4GB ram so in order to get those fully i installed the 64bit version. On clean install of the 64bit ver everything went fine, but i updated the system and followed theese instroctions [URL] and that's all.
Before i atempt to login i can ssh to the machine.
View 7 Replies
View Related
Nov 18, 2010
Have been configuring fedora 14 to connect to a windows domain server and have been successful so far....am now on mapping network drives when the user logs in via the gnome gui.
If there is a better method of mapping network drives on login
After reading up on PAM_MOUNT and using that for mapping drives on login I have been able to successfully map them, but it doesn't do this automatically on gnome login.
Problem is as follows: It works when i connect / login using the terminal but requires me to enter the password once (even when i logged into the user account on gnome).
How I want it to work:I would like the mapping to occur when i login via gnome so that i dont have to open a terminal once logged in to gnome to map the network drives. I would like it to login without having to type the password again as the user is already logged in
Config Files:
#--- ~/.pam_mount.conf.xml ---#
<?xml version="1.0" encoding="utf-8" ?>
<pam_mount>
<volume fstype="cifs" server="GRA.GI" path="apps" mountpoint="/mnt/GRA.GI/apps"/>
</pam_mount>
[Code].....
View 2 Replies
View Related
Dec 14, 2010
I'm seeing really bad user login format under a standard installation and am wondering why ubuntu does this as default. I have noticed that the graphical login for gnome sizes itself to accommodate a user's exact password length. This indicates to me that somewhere on the unencrypted part of a standard installation with user encryption contains at least some indication of the content of the password length which seems a security flaw even if not a complete hole, it majorly reduces the number of attempts a cracker would have to cycle through.
And that's assuming that *only* the length is contained. Furthermore it seems that it would be MUCH better to simply display the number of characters entered into the pw field and allowing the gui to expand itself from an fixed size as the field is filled out so the the user still receives visual feedback for entering characters. Either a simple character count display should be entered into the field or a 10 dot to new line so that one can visually quickly count the number enter by multiplying from a 10base graphical observation.
View 9 Replies
View Related
May 2, 2011
I was eager to try GNOME 3 in Ubuntu 11.04 (because I wasn't very satisfied with Unity, like almost everybody around) so I installed it using this guide:http://news.softpedia.com/news/How-t...4-194085.shtmlAfter rebooting the system (to finish the installation), I've got an error message while trying to login:Quote:Could not update ICEauthority file /home/<username>/.ICEauthorityI've googled for some time and found different 'solutions', however none of them seems to be working.What can be done with a system like this? I'm not able to login, how can I downgrade the system?
View 8 Replies
View Related
Jun 17, 2011
I am using gnome-desktop , now I can't login to my user, which log I have to view ?
View 9 Replies
View Related
Apr 10, 2010
My gnome screen goes blank for a particular user,for the rest of the user i'm able to login in the gnome GUI,it's was working fine till now.
View 5 Replies
View Related
Oct 3, 2015
I've got to purge GNOME from Jessie old netbook of my mom at least think so. It just run out of free space on 8Gb SSD. After upgrade GNOME is not accessible. System is stuck on logon 'GDM' screen without possibility to login for any user including 'root'. Here [URL] .... are given instructions on how to purge GNOME from installed system and install 'xfce' instead. Is this the right way to do it? And do I have to reboot netbook into 'Recovery mode' for it? URL warns about possible system crash during changeover. That is highly unwanted!here [URL] ....
View 6 Replies
View Related
Feb 1, 2016
I have installed xfce with synaptic and when i rebooting, i can't log in with my normal user on gnome and xfce, but i can it with terminal (ctrl + alt + fX), but i can login in gnome with a new user.
I have uninstall xfce and remove gnome and reinstall it but i still cant...
dpkg-reconfigure gnome-shell i think didnt change nothing...
I haven't /etc/X11/ directory...
On terminal, if i do startx, works, but i cant login gnome anyway...
View 1 Replies
View Related
Nov 20, 2009
Last night I started my computer and loaded my CentOS 5.2 partition (Windows 7 on the other partition). I was able to login to my account, but was given a gnome error that the panel buttons (i.e. weather, cpu monitor etc) could not be loaded. I then went to restart the computer (probably not the smartest thing to do) and was given some file errors upon shutdown that were related to /dev/VolGroup00/LogVol00. After restart I was taken to a shell and ran fsck manually. It seemed to find a lot of bad blocks, so I repaired the /dev/VolGroup00 system and restarted. At this point CentOS seemed to boot normally, but upon loading of the login screen I get the error: Configuration not correct The configuration file contains an invalid command line for the login dialog, so running the default command. Please fix your configuration.
I cannot even log in as root. I get the error /usr/bin/gnome-session: error while loading shared libraries: libgnome-desktop-2.so.2: cannot open shared objects file: no such file or directory. I then went to a shell and ran: sudo yum install libgnome-desktop-2.so.2, but the package was already installed and up to date, so there was nothing to do. I am therefore stuck at this login screen with pull-down menus and tabs where I can change the configuration, add/remove users etc. So, my question is this: How do I restore my user profile so I can login....and if anyone has some insight, what caused this to happen in the first place? I should also mention, this all happened after plugging the computer into a new internet connection. No clue if that's even relevant.
View 11 Replies
View Related
May 2, 2011
Just for some testing on a test non-productive machine, how to allow Gnome login by root user on squeeze?
View 8 Replies
View Related
May 22, 2010
Is there a way to prevent ubuntu/gnome to show the user name(s) at the login screen?
Only asking "username" and not "login as"?
View 3 Replies
View Related
Jun 3, 2011
yesterday I updated my fedora 13 to fedora 14 (on laptop) and today i cannot log in on user. It just go blank for a sec and is back to login.
At text console (alt+ctr+f2/f3) i enter my username and pass it give this for a sec and resets (clean) console
username: Name
password:
last used: [date]
login: no shell permission denied
i used unetbootin (fedora 14 netinstall to update) and later i updated 1,5G before reboot (did update that fix, forgot its name tho :s)
I would most likely reinstall everything, but i have some work at laptop and as death-line is near, i would prefer to fix it if possible.
edited:
i have installed F13 on unused space, is there a way for me to access and fix it? or at least get some files from there?
View 1 Replies
View Related
Feb 7, 2010
When I am at the login manager and enter the password and user and select KDE then the login manager just reloads itself and nothing happens.But when I select gnome, then I can login and everything works.I can start kde while logged in in gnome with "startkde", but then i have both desktop environments running
View 10 Replies
View Related
Feb 7, 2010
I set my user as no login my accident, I am assuming, and now after a re-boot I can't login to the desktop and do anything... is there a way to override this?
View 5 Replies
View Related
Jul 17, 2010
I have a very peculiar issue - I can't log in to KDE as one particular user (andrew, which is my regular account) though all other users including root, mythtv & other family members can log in without any problem. When I try to login as andrew the X server appears to crash as the screen goes blank and I have to press Ctrl+Alt+BkSp to get back to the KDM login screen. The proximate cause seems to have been updating KDE to 4.4.5 using yum - I did this logged in as andrew in a terminal session using su - root, and the black screen problem arose next time I tried to log in.
I can log in OK as andrew using a different desktop manager e.g. Sugar. I am using radeonhd graphics driver; if I change to "vesa" in xorg.conf I can log in OK. If I change the home directory for andrew to that of another test user and change the file ownerships, I can log in OK. Therefore the problem must lie in a config file(s) somewhere in the andrew home directory tree, which is specific to KDE and also radeonhd. I have checked in all the obvious (and unobvious) places but can't find anything. There are no relevant SELinux errors or entries in syslog or Xorg.0.log. The .xsession-errors file from a failed login attempt is here [URL] it isn't significantly different from a normal one, and as the entries are not time-stamped I am not sure which ones arise during the login and which when I restart the X server. I am running F13 (kernel 2.6.33.6-147.fc13.x86_64) without any other significant issues.
View 3 Replies
View Related
Jun 17, 2011
Well I did something pretty stupid and now I can't log in with my user other than the root user. Basically, I wanted to change my username and so I when to the admin > user & accounts - and selected the account I wanted to change. Anyway I did that and then logged out. Since then all I get when I reseted is a spinning mouse ball and a black screen. I can get into the shell prompt - but I'm not sure how I'd go about fixing this issue I created. At the moment I'm logged in the shell with root, and if I type 'id' I can see my old username, but I think the links behind it are broken.
View 5 Replies
View Related
Feb 28, 2011
I installed Fedora 14 on a Windows 7 64 bit machine. I forgot my password to access the fedora operating system. Pls, is there a workaround?
View 1 Replies
View Related
Jan 24, 2010
Intermittently I seem to have no panels when I login to Gnome on my F12 install.I can fix it by "pkill -USR1 gnome-panel", but there's got to be a root cause for it.I've found loads of results on Google, but no solutions, mostly Ubuntu users (you never seem to get solutions from Ubuntu users!)
View 11 Replies
View Related
Dec 4, 2010
I've just installed F14 64bit on my desktop and I tried to run Open Office Writer. As a result, GNOME crashed and the rendering of the desktop was messed up. I had to force a reboot, and now everytime I login the Open Office recover dialog causes a crash again. I suppose it has something to do with the opensource nvdia drivers and OO.o's toolkit but I can't look at it with the crash-on-login thingy there (I suppose I can install the closed source drivers from a tty now that I am thinking it again....)
---------- Post added at 07:27 PM ---------- Previous post was at 07:24 PM ----------
Uh... actually I can't install the closed source drivers. Yum finds no mirrors for rpmfusion >(
...or the Fedora repos :
View 1 Replies
View Related
Jun 24, 2011
To get my external display working on my laptop I need to run these commands after logging into gnome. I've tried .xprofile, .xsession and .Xsession and none of them seem to run. I also tried putting it in /etc/X11/xinit/xinitrc.d/ however it didn't seem to respect the last command to set the external monitor as my primary output.
Code:
#!/bin/bash
xrandr --newmode "1440x900_60.00" 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync
xrandr --addmode VGA-1 1440x900_60.00
[code]....
View 5 Replies
View Related
Jun 13, 2009
is it possible to set up a user account for automatic login on fedora 11, and if so, how is it done?
View 3 Replies
View Related
Sep 8, 2009
I have a problem, I have installed Fedora 11. And i need to login as root user.
How to do so?
View 14 Replies
View Related
Oct 2, 2009
I wanted to do an installation from my user login so I typed
sudo make install
then it says
<my_user_loggin> is not in the sudoers file. This incident will be reported.
How to correct this matter...
View 4 Replies
View Related
Dec 18, 2009
I've recently upgraded my hardware. Now, the system boots perfectly fine, but I can't login to the tty as root or any other user. Infact yes, I can login, but as soon as it shows Last Login, it exits and then I'm back to a login prompt. I've successfully booted into single user mode, and changed all the passwords, but still it fails. X doesn't start, although I think it's due to the old xorg.conf having the wrong driver.
View 9 Replies
View Related
Jul 6, 2010
After upgrading FEdora 13, user ravi was added. Then after few days neel was added. Both of the users were already existing. So when attempting login to neel, we found that every file is owned by ravi. So we did$chown -R neel:neel But after that problem started and when we rebooted the machin, there were no list of users on login screen. (then I connected to that comp remotely, it worked, but somehow I was not able to switch to root) It says incorrect password (though I new it very well). So I went to maintenance mode and changed the root password, and rebooted. Still problem persists.Now I am not able to login as root (from anywhere, login screen , terminal, remote)No list of usernames on login screen ( but i can choose, other and type login-password)
View 5 Replies
View Related
