I just install Fedora 15 directly to an internal drive. I've installed a few programs using Autoplus, but when I try to run a software update, I get the following error when I try to install the updates:
'could not add package update for fedora-release-rawhide-15-3(noarch)updates: fedora-release-rawhide-15-3.noarch'
I keep getting the updates icon popping up asking me to install software that is either already installed (Adobe Flash Player 10.1) or something that fails when I actually try to install is but I am sure it is also already installed (RPM Fusion Repository Config -free and nonfree). When I try to install the RPM Fusion packages it asked me for a Software Signature and then fails with the following message: failed to install signature: Traceback
[code]...
I have the flash player installed already and I am sure I already installed RPM Fusion. how can I resolve this and stop it from constantly asking me to install these packages?
I've just installed 11.2 Gnome 64 bit and after applying the updates and when it gets to finding server it says all are too slow and I get this Error 5:Connection too slow... no server available, aborting. I hit ok and it disappears.
View 1 Replies View Relatedfglrx error - Can't install new updates
View 2 Replies View Relatedi have fedora 15 that i updated from fedora 14. i get notification that updates are 73 updates available , i click install i get this error libtool-2.4-4.fc15.x86_64 requires gcc = 4.6.0 : Protected multilib versions: flash-plugin-10.3.183.7-release.i386 != flash-plugin-10.3.162.29-1.x86_64 Protected multilib versions: libgomp-4.6.0-10.fc15.i686 != libgomp- .6.1-8.fc15.x86_64
View 8 Replies View RelatedSince yesterday my computer behaves really strange. I fear it's a hardware issue. At most I did some minor updates, but no big software or OS change.
When I turn it on it goes immediately to [url]
I guess it reads
Code:
Chasis intruded
Fatal Error... System Halted.
So this happens before the boot manager... When I press the reboot button it goes to the boot manager and works seemingly fine - all I noticed that it doesn't remember the time, or better remembered the time form the last usage but doesn't count it forward. While using the time seems to pass in a normal speed.
What could this be? Some chip on the mainboard broken? Some BIOS virus (does something like that exist?) Or maybe just a cable which got lose?
I don't know which other informations could be helpful. I built it myself some years ago and the parts are pretty random (back then I didn't even know about linux compatibility nor used it at all). I have a dual boot with openSUSE 11.2 and windows xp, but the network card is deactived in xp for a year at least already.
i'm a newbie to Fedora 12. While d/l the updates and installing I got this error. Where do I start?PS...I'm weening myself off MS so be gentle.
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module>
[code]....
I need to installing updates on fedora in my computer.
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module>
main()
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main
backend.dispatcher(sys.argv[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 710, in dispatcher
self.dispatch_command(args[0], args[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 657, in dispatch_command
self.update_packages(only_trusted, package_ids)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1948, in update_packages
signed = self._is_package_repo_signed(pkg)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1437, in _is_package_repo_signed
repo = self.yumbase.repos.getRepo(pkg.repoid)
File : /usr/lib/python2.6/site-packages/yum/repos.py, line 121, in getRepo
'Error getting repository data for $s, repository not found' $ (repoid)
Code:
# yum update
Loaded plugins: presto, refresh-packagekit
Setting up Update Process
Resolving Dependencies
--> Running transaction check
---> Package evolution.i686 0:2.30.2-1.fc13 set to be updated
--> Processing Dependency: libedataserver-1.2.so.11 for package: nautilus-sendto-2.28.4-1.fc13.i686
[Code]...
Error: Package: empathy-2.30.1.1-1.fc13.i686 (@updates) Requires: libedataserver-1.2.so.11
Removing: evolution-data-server-2.30.1-2.fc13.i686 (@fedora)Error: Package: gnome-panel-2.30.0-1.fc13.i686 (@fedora) Requires: libedataserver-1.2.so.11 Removing: evolution-data-server-2.30.1-2.fc13.i686 (@fedora)Error: Package: nautilus-sendto-2.28.4-1.fc13.i686 (@fedora) Requires: libedataserver-1.2.so.11 Removing: evolution-data-server-2.30.1-2.fc13.i686 (@fedora) You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest
I was trying to update my system few minutes ago, and I got this error:
Code:
Error: Package: coreutils-8.4-8.fc13.i686 (@updates)
Requires: coreutils-libs = 8.4-8.fc13
Removing: coreutils-libs-8.4-8.fc13.i686 (@updates)
coreutils-libs = 8.4-8.fc13
[code]...
For some reason Update Manager is not installing updates as of yesterday.I have it set to check daily and notify if updates are available. It has been working without issues for well over a year now.
Update Manager tells me updates are available and presents the list of security, recommended, and other updates. All are selected to update, but when I select Install Updates in Update Manager it returns with a Reading Package Information window overlaid on the main Update Manager window - building dependency tree then reading state information and dumps me back to the main Update Manager window without performing any update actions.
I keep getting the following error when trying to install anything:
Could not retrieve mirrorlist http://mirrors.rpmfusion.org/mirrorl...d-11&arch=i386 error was
[Errno 14] HTTP Error 404: Not Found
Error: Cannot find a valid baseurl for repo: rpmfusion-free-updates
So this tells me the servers are down however if i put the link in FF I don't get 404.I am installing on a new box and I can't get the stuff I need.
i tried running (yum update, also yum install vlc) and i get these error
Code:
Error: Package: abrt-1.0.7-1.fc12.i686 (updates-testing)
Requires: librpm.so.0
Removing: rpm-libs-4.7.1-6.fc12.i686 (@anaconda-InstallationRepo-200911081854.i386)
[code]....
I have recently decided to rebuild my fedora install and have had several problems installing the updates to the system. I am receiving the following error:
libcdio.so.12 is needed by package gstreamer-plugins-ugly-0.10.14-1.fc13.i686 (rpmfusion-free-rawhide)
libcdio.so.12(CDIO_12) is needed by package gstreamer-plugins-ugly-0.10.14-1.fc13.i686 (rpmfusion-free-rawhide)
[code]....
I am more familiar with using sources.list in debian style distros but I am unsure how to proceed with /etc/yum/repos.d. I am currently attempting to either install them from the CLI or to download the binaries, but I do not think that will fix the problem in my repository lists.
I have two laptops at home and they are both running fedora 13. Now the problem that i am facing is that the internet over here is a bit expensive and downloading the same updates for both laptops becomes bandwith intensive. Can i update one laptop and update the other laptop from the first one? Do i have to install some server that would act as a repo?
View 10 Replies View Relatedi just finished a fresh install of F14 and ran yum update, but it comes back with no updates? In the past, i've always had tons of updates after an install. Did the updates happen during installation so that I have a fully updated version?
View 2 Replies View RelatedI have just installed F 12 - clean install- but when I go to get updates today (Dec 2nd) no updates appear.I have done yum clean and yum makecache but still no updates available in software updates
View 8 Replies View RelatedI'm having a problem downloading and installing any updates. It compiles a list of updates, then tells me I need to install further updates and generates a list of those. Then it provides me with an error message. Info on which is in the code quote below. I'm very new to Linux, so I can't say I know how to go about sorting this issue. It's a PC with the following processor
Intel Pentium (R) Dual CPU E2180 @ 2.00Ghz
Code:
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module>
main() .....
I get this message when trying to install software updates in Fedora 12:-Quote:
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module>
[code]...
I am recently installed Fedora User (From a Live USB) I tried to install the updates that are detected here in my computer, but because a missing repository it don't installs.
View 8 Replies View RelatedI am running Fedora 12 on a system with Intel Core2 Duo CPU, Linux Kernel 2.6.32.14-127.fc12.x86_64, and Gnome 2.28.2. I have two questions about Software Update:
1. Software Update tells me there are two updates available:
openssl-1.0.0a-1.fc12(i686) and
openssl-1.0.0a-1.fc12(x86-64)
If I try to download and install openssl-1.0.0a-1.fc12(i686), I get the following errors:
Test Transaction Errors: file /usr/share/man/man1/asn1parse.1ssl.gz from install of openssl-1.0.0a-1.fc12.i686 conflicts with file from package openssl-1.0.0-4.fc12.x86_64
file /usr/share/man/man1/ca.1ssl.gz from install of openssl-1.0.0a-1.fc12.i686 conflicts with file from package openssl-
[code]....
I tried the --skip-broken option, resulting in: Packages skipped because of dependency problems:
openssl-1.0.0a-1.fc12.i686 from updates
openssl-1.0.0a-1.fc12.x86_64 from updates
The Software Update "Help" pages refer to a software log viewer which should be located at Applications-->System Tools-->Software Log Viewer, but it isn't there.
I installed Fedora 10 x86_64 from DVD this weekend. Once the install was completed and I booted into the new install, I ran the Software Update expecting to find and download security updates. However, to my surprise no updates were found! The install DVD was downloaded and burnt to DVD about two weeks ago. Did the installer fetch and install the F10 updates? Or did I mess up my install and/or configuration of F10? I remember when I installed F9 there were a lot of updates found right after the install.
View 14 Replies View RelatedI recently intalled Fedora 12. After installing, I tried to install update, i received an error message as follow:
Loaded plugins: presto, refresh-packagekit
Error: Cannot retrieve repository metadata (repomd.xml) for repository: fedora. Please verify its path and try again.
I enabled RPM fusion free and non-free.
I have 2 PCs, one of them is updated with latest updates.
For sure the 2 PCs have the same OS Fedora 14. How to install or catch those updates in order for me to install them offline on the other PC ?
when ever i try to install updates i get shown an error & the updates stop the error i get says "librpmio.so.0 is needed by package abrt-1.0.3-1.fc12.i686 (updates) librpm.so.0 is needed by package abrt-1.0.3-1.fc12.i686 (updates)"
View 12 Replies View RelatedThe little red popup window (packagekit) from the lower right showed yum updates
I did a yum update and no updates!
I tried again this morning and no updates
I'm not sure if this is the right place to post this, but...well, I just installed Fedora after using Ubuntu for a while, and everything has been going good, except for installing upgrades. When I open the Update Manager, it says there is 399 updates. When I click install, after about ten seconds this pops up:Code:An internal system error has occuredA problem we were not expected has occured. Please report this bug in your distribution bugtracker wth the error description.
More details:
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
[code]....
I have updated the gdm file to be able to log in as root in Fedora 10.Nevertheless after I had selected package updates to be installed logged in as root I still get an error message that I do not have enough privileges.The terminal installation method is a bit of a problem since I do not think it will search for dependencies and therefore it can be excessively long to figure out what is missing for a package installation. In simple cases it works OK, but in more difficult cases it is a bear.
View 8 Replies View RelatedI don't understand this error nor do I know how to solve the issue that is causing the error. Anyone care to comment?
Quote:
Error: Caching enabled but no local cache of //var/cache/yum/updates-newkey/filelists.sqlite.bz2 from updates-newkey
I know JohnVV. "Install a supported version of Fedora, like Fedora 11". This is on a box that has all 11 releases of Fedora installed. It's a toy and I like to play around with it.
When I try to run the Online Updates to the system through Yast I get the following errors for each package:
[QUOTE]
Subprocess failed. Error: RPM failed: warning: /var/cache/zypp/packages/Packman Repository/Multimedia/i586/libaudcore1-2.4.4-1.pm.1.1.i586.rpm: Header V3 DSA/SHA1 Signature, key ID 9a795806: NOKEY
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
[Code]...