Does anyone know how to install html-export plugin for Gedit ?
I took it from here: [url]
It is pretty old, was not updated for a long time.
When configuring I get:
Code:
Alternatively you may set the GEDIT_CFLAGS and GEDIT_LIBS environment variables to avoid the need to call pkg-config. See the pkg-config man page for more details.
I have installed gedit-devel but it did not help unfortunately.
I need some plugin for Gedit (or maybe other HTML-editor) which will make tags of words, like: I type "div", hit some hotkeys or anything else with keyboard and get "<div></div>". The same with all the words I type in. Do you guys know which piece of software can do such things?
View 2 Replies View RelatedI have a CSV file, which I created using an HTML export from a Check Point firewall policy. Each rule is represented as several lines, in some cases. That occurs when a rule has several address sources, destinations or services.
I need the output to have each rule described in only one line. It's easy to distinguish when each rule begins. In the first column, there's the rule ID, which is a number.
Here's an example. In green are marked the strings that should be moved:
See example. The strings that should be moved are in bold:
NO.;NAME;SOURCE;DESTINATION;SERVICE;ACTION;
1;;fwgcluster;mcast_vrrp;vrrp;accept;
;;;;igmp;;
2;Testing;fwgcluster;fwgcluster;FireWall;accept;
;;fwmgmpe;fwmgmpe;ssh;;
;;fwmgm;fwmgm;;;
What I need ,explained in pseudo code, is this:
Read the first column of the next line. If there's a number:
Evaluate the first column of the next line. If there's no number there, concatenate (separating with a comma) the strings in the columns of this line with the last one and eliminate the text in the current one
The output should be something like this. The strings in bold are the ones that were moved:
NO.;NAME;SOURCE;DESTINATION;SERVICE;ACTION;
1;;fwgcluster;mcast_vrrp;vrrp-igmp;accept;
;;;;;;
2;Testing;fwgcluster-fwmgmpe-fwmgm;fwgcluster-fwmgmpe-fwmgm;FireWall-ssh;accept;
;;;;;;
The empty lines are there only to be more clear, I don't actually need them.
I have installed gedit latex pugin but I am not able to compile the tex file from the gedit.Ihave rubber installed as well
View 2 Replies View RelatedI want to install the LaTeX plugin for gedit. There is a Ubuntu package for this, but it seems to want to install an entire TeX system in addition to the plugin. I keep my LaTeX current from the texlive distribution, and Ubuntu tends to a year behind in its LaTeX distribution. Question: Will the package installer detect that I have a current LaTeX system and not install an older version?
View 2 Replies View RelatedI'm trying to view a movie in totem but an error occurs saying missin plugin text/html totem can't find im when it asks to search for. what can i do to solve this error
View 5 Replies View RelatedZen-coding is a great gedit plugin for html & css development.I download the files and unpack them into ~/.gnome2/gedit/plugins/.After open gedit I can't find zencoding in the Gedit Preference.
View 9 Replies View RelatedAfter a month or so on a WUBI install (Lucid Lynx 64bit) I decided to pass to a clean install to a dedicated partition and here I am, almost happy. I have installed 5* ( uninstalled & installed) gedit-plugins package by every means I know of (apt-get from terminal, ubuntu software center, synaptics) and I also have downloaded and unzipped the package to ~/.gnome2/gedit/plugins folder. But none of the plugins is working.
I don't know if it is relevant, but i noticed the following: on my wubi installation i had installed gedit-plugins with apt-get and it had installed in the ~/.gnome2/gedit/plugins folder. Now I find the contents of the package in /usr/lib/gedit-2/plugins and /usr/lib64/gedit-2/plugins. I don't know if it has anything to do with anything.
We All know Gedit Autocomplete plugin (nagaozen / gedit-plugin-autocomplete 0.10.1). It has a cool feature where it reads words from a "Library". How to Edit that library?
View 2 Replies View RelatedI'm trying to install extra tags into the taglist plugin for gedit.
Since upgrading to Lucid I've been unable to make this work.
I've tried putting them in both the following locations without joy:
I've also tried putting the tags in there in both compressed and non-compressed format:
ive installed the classbrowser plugin for gedit, and installed it the correct manner, by copying all the contents of the download to the .gnome2/gedit/plugins folder. The side pane shows up when i enable the plugin but it doesnt seem to do anything (the pane is just blank). Do i need to do anything else to get it to work?
View 3 Replies View RelatedI followed the instructions here:
[URL]
But the checkbox to enable it in gedit becomes grayed out once I click it and it doesn't enable. (note that I used "pip install ElasticTabstops" instead of "easy_install ElasticTabstops", because that's what Arch uses)
I have just added a local radio station to the list in Rhythmbox but when I double click on the link to listen to the radio station i get a message stating: Search for suitable plugins? I click on Search and i am finally informed that: No packages with the requested plugins found. The requested plugins are:
text/html decoder
Where I can get hold of the text/html decoder
Is there any gedit plugin, which expands folders of file browser side pane and shows currently editing file, while user switches between tabs?
View 1 Replies View Relatedseahorse export menu is always disabled. I need to export the passwords to restore it after formatting my machine.
View 1 Replies View RelatedI',m having trouble running the zotero openoffice integration plugin in F13 under the openjdk plugin.It's known top be not working as per The problem lies in some permissions as reported here -fedora-linux/However i want to know if there's any progress on it, since i dont have privilege to install it in my lab computer. Also i found this old bug reportwhich seems to have something done.If anypone has any idea please post, else i think i need to file a new bug report.EDIT: I'd be glad even if someone can guide me to write local policy (.java.policy) to enable the plugin
View 1 Replies View RelatedI set-up my Sudo it works but when I use Gedit I get the following message
Jean-Luc@localhost:~> sudo gedit /etc/fstab
(gedit:7137): Gtk-WARNING **: cannot open display:
samething with /etc/sudoers
If I use vi it's ok, I can modify and save. In Fedora it run ok, but with opensuse?
I am trying to make wine work for explorer. I followed some instructions on this link [URL] To follow this link, I am supposed to
cd ~/ies4linux/ie6
cp user.reg ~/user.reg.old
gedit user.reg
1st and 2nd line went well 3rd line when I try to execute the command gedit user.reg (gedit:2573): Gtk-WARNING ** cannot open display I then /ies4linux/ie6# ls dosdevices(in blue) drive_c(in blue) system.reg(in white) userdef.reg(in green) user.reg
When scrolling down in nano with keyboard (holding "down" key), nano scrolls several lines at once each time. Is there any possibility to configure it so it will scroll one line each time like gedit does when scrolling in gedit?
View 3 Replies View RelatedI used wget -r to get all the web pages that were linked from index.html. The pages listed in index.html are all chapters. After using wget -r, all the chapters are now in the same folder on my local hard drive. Is there a way to build the chapters in their proper order into a "long"/"full" web page, rather than simply having each chapter as a link/next link on a previous page?
View 9 Replies View Relatedwhat is the best way (i.e standard way that is supported on all browsers and probably as well followed by web crawlers).... to include an html file either locally or externally in another ? Of course , i've done the research and i also know that there are server side includes (php , asp ...you name it) at the moment , i'm using this:
Quote:
<script type="text/javascript" src="path to file/include-file.js"> </script>
however, i've been warned that this method may not show up in some browsers as some tend to ignore this tag and that crawlers like your favorite search engine wouldn't bother reading this. so , what is the best and safest way to do the job? and btw , the reason why i've ousted SSI's from the start is because of among other things:
1) the fact that the included file is static html and because the text is included pretty much everywhere
2) hoping to reduce load time as the code (if successfully recognized) would hopefully be treated like any other embedded external file (e.x like an image) , therefore it would be cached without the need to downloaded it over and over again for each new page on the site.
So I've always added an export line in the /etc/profile that has the proxy server for our organization. Now there is a warning in that file that I should use a custom .sh in the profile.d folder. Can I just create a myproxy.sh with the export http_proxy="insert my proxy" line in it and call it a day or do I have to do some crazy shell script?
View 2 Replies View RelatedI'm trying to get experience in creation of virtual Fedora 9 x64 cluster using Ubuntu 9.04/Virtual Box 2.2.2. I have a head node with 1 G of RAM and two slave nodes with 512 M each. There's internal networking in Virtual Box with DHCP, so my nodes have addresses:
192.168.15.100/24 (Slave0.localdomain), 192.168.15.101/24 (Slave1.localdomain), 192.168.15.102/24 (Head.localdomain). Ping is OK. I've added the following string to /etc/exports file: /usr/share 192.168.15.0/24(rw) And then used /usr/sbin/exportfs -a But showmount -e 192.168.15.102 entered at slave node shows nothing. What's wrong? May be I have to somehow start nfsserver, but how?
I used to have all my mp3s, photos, etc. on a Seagate "Freeagent" removable USB drive and share it over a Windows network. We've gone all Linux in the house and I tried to export the same drive over NFS (got the NTFS support installed, ntfs-3g) but get this error:
Code:
Starting NFS services: exportfs: Warning: /media/FreeAgent Drive does not support NFS export.
how to model using blender(2.48) on fedora 9, and I'm having one small problem. I have been modeling on Tremulous on and off, but I have been having a recurring problem with vert counts that I have decided to address. I had planned to add plugin scripts to blender that will let me import/export md3 files. I was able to download the plugins in a zip file and I know where the blender scripts are located, but this is where I'm having problems. When I try to move the extracted plugins into the folder, I get a warning about me not having permission. I know I can get around the problem by using my root login command. What I don't know the command I need to use to move the plugins where they need to go.
View 5 Replies View RelatedJust did a fresh install of fedora 14 (laughlin). I want to run gedit as root ... that's my prefered way for creating and adjusting system config files. Now I'm very stuck ... can't even access yum.conf to set keepcache. I get:
Code: (gedit:2598): EggSMClient-WARNING **: Failed to connect to the session manager: None of the authentication protocols specified are supported ** GLib-GIO:ERROR:gdbusconnection.c:2270:initable_init: assertion failed: (connection->initialization_error == NULL)
I'm trying to use gedit as root to edit some config files, but everytime I try to open it, I get this mess. I had a similar issue with debian, and someone solved it by telling my to run gksu nautilus. I tried to run gksu gedit, but apparently that doesn't work on Fedora. I really like Fedora, and I want to stick with it, but if I can't edit these files, I'm going to have issues.
Code:
[kevin@senbonsakura ~]$ su
Password:
[root@senbonsakura kevin]# gedit
[Code]....
Is there an easy to make an entry in /etc/exports to export a directory for every entry in /etc/hosts?
View 2 Replies View RelatedI am curious if yum can be used to export a list of packages from machine 'A' then I can take it to machine 'B' and import/install the list so my machines all have the same software.
View 4 Replies View RelatedI use Fedora 11, and have an external HD (USB) which has 4 partitions of 500GB each.
/dev/sdb1 is an NTFS partition that is exported to my windows machine using samba.
However, only 75GB is visible in windows (via rt.click properties).
Anyways, below is output from fdisk -l. why does windows see only 75GB of a partition that is 500GB in linux?
fdisk -l
Disk /dev/sda: 80.0 GB, 80000000000 bytes
255 heads, 63 sectors/track, 9726 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000ac734
[Code]....
