In Fedora 12 when ever I log into my desktop Firefox and Evolution are in off line mode when I run them.
I do not use NetworkManager and this is turn off (both service and icon) as this machine has mutable nailed up connections. I am guessing this is what it is as I have laptop with F12 on that has NM turned on and I am not seeing this behaviour.
How to change this behaviour? I is a tad annoying F11 didn't do this.
Finally solved a problem of wireless not working on my laptop. Now I have a problem where Firefox (3.6.4) starts up in off-line mode on each instance. I have to go to files menu and uncheck the work offline button before trying to go to any site. When I close firefox and later open it again, the work offline button is still checked.
Why is the unchecking of work offline saved between instances? Other settings and preferences are saved correctly. I don't have this problem in openSUSE 11.2 & 11.3 (same version of FF).
Fedora 13
kernel 2.6.33.5-124.fc13_x64
KDE 4.4.4
Firefox 3.6.4
Dell Studio 1745
Intel Mobile Series 4 wireless 5100bg
I have a couple of backup scri ts. I use a rather cumbersome method to backup evolution. I finally realized I can backup evolution easily from its File Menu. Can I do this directly from the command line, so that I can use it in a script?
View 2 Replies View Relatedmy fedora 14 did an automatic update tonight and on reboot it hangs displaying the "f" before the login in menu. The "f" is how I now feel.I do "fn+f2" as it is booting and it displays the sequence of loading items which report all is "ok" until it gets to "jexec services" and then it hangs.I do not know how to access the machine in command line mode and I am not sure what to do from here. I beleive the "jexec service" is a Sun Java item but I am not sure.
View 2 Replies View RelatedHave been trying to resolve this problem for hours using;
However on-click email link I get;
I am at a loss to get this working. I used thunderbird before with no issues, but needed a microsoft-exchange email server for my work account, supported by evolution.
Kernel Info;
2.6.31.12-174.2.3.fc12.i686.PAE
KDE: 3.5.10-21.fc12 Fedora
I have installed RHEL5, solved the problems around it and started to set up the GRUB. I have set the menu.lst with simple
rootnoverify (hd1,0)
mkeactive
chainloader +1
and tried to boot the Win7 on that partition. NO LOADER came up and since that moment
Grub is only in "Minimal BASH-like line editing" mode. I have tried all of I have googled, nothing have worked. There is a problem with even finding /boot/grub/stage2, or anything else, grub won't let me mount any partition. When I try to find any file, it says file not found. It is important to say that all I did to cause this was change in menu.lst
rootnoverify (hd1,1) to rootnoverify (hd1,0)m nothing else! There is no logic in this....
On my friend's fedora 13 install, firefox was working, it seems, until the recent kernel update (kernel is now 2.6.33.6-147.fc13.i686).
After the upgrade, opening firefox would crash the system shortly after starting, so firefox was re-installed (once using rpm, once using yum).
After a re-install of firefox (using yum: firefox version is now 3.6.7) and Until a reboot, the repeated error report went something like this:
After checking to see if the flash plugin was still around and then doing a hard re-boot, however, just opening firefox immediately freezes the system.
Konqueror will run (albeit rather lamely)
In that I don't know the schedule for f13 kernel updates, if indeed the new kernel is causing this problem, does f13 save old kernels? How do I get the older kernel to start (with fc9 the option could be set in grub, or I could startx from a terminal but I have not been keeping up and am not sure how to do this.
I see there are many firefox issues lately...
The GUI for network configuration of Fedora is marvellous such that the configuration is almost fool-proof. But how can I make the connection by hand in the command line mode? It goes okay except the very last step. When I disconnect the eth0 interface from the right-hand side of the desktop GUI, I tested how to bring it back by command line but I failed. When disconnected, the ifconfig still shows the eth0 interface, with just the ip address portion changed.
I tried "ifconfig eth0 192.168.1.xx" to give it an ip address but the connection is still down even if the ifconfig shows an ip address for the eth0 interface. Then I tried "/etc/init.d/network restart" and "ifup eth0" and also "route add defaut gw 192.168.1.1" but none of these could accomplish the same work as a single click on the GUI to connect. I am very curious about how to do it in the terminal.
I'd like to have Firefox startup automatically in full screen after logging into gui mode.
I figured out log in automatically after searching this forum but cant figure out how to get apps to start up automatically.
I recently did a fresh install of 10.10 (previously I had 10.04). I could not do an upgrade because the package manager had a problem with unresolved dependencies resulting from the installation of a Nokia package for my CS-15 usb modem.Since it was a new install, I did fresh backups of everything I needed, including evolution. After the install I tried restoring my email from the backup. Then I noticed that the send/receive button was disabled and so was the option to work online in the file menu.
The version of evolution is 2.30.3.I thought this threadhad an answer to my problem but it appears to be something different. I tried posting to that thread but repeatedly got a database error message. A new thread is probably a better way to go anyhow.I tried deleting the .evolution folder in my home directory (as suggested in that other thread) and then re-installed evolution. That didn't work, however. I still have the same problem.Oddly enough all my account details are still there! I tried checking the supported authentication and that seems to work.I've trawled a number of forum posts in this and other forums but haven't seen this problem described anywhere.
I recently did a fresh install of 10.10 (previously I had 10.04). I could not do an upgrade because the package manager had a problem with unresolved dependencies resulting from the installation of a Nokia package for my CS-15 usb modem.
Since it was a new install, I did fresh backups of everything I needed, including evolution. After the install I tried restoring my email from the backup. Then I noticed that the send/receive button was disabled and so was the option to work online in the file menu.
The version of evolution is 2.30.3.
I thought this thread:
Had an answer to my problem but it appears to be something different. (still can't post URLs... not enough posts to date)
I tried deleting the .evolution folder in my home directory (as suggested in that other thread) and then re-installed evolution. That didn't work, however. I still have the same problem.
Oddly enough all my account details are still there! I tried checking the supported authentication and that seems to work.
I've trawled a number of forum posts in this and other forums but haven't seen this problem described anywhere.
How I can get my email to function again?
I have installed Claws Mail and can now access my mail without recourse to a web portal. However, this is a very unsatisfying work-around and I'd really like to get Evolution working again. One very strange thing: shortly after installing Claws I tried Evolution again and for that one session everything was OK. Now it is stuck in offline mode again.
I need to export Evolution from a hobbled system, whose gnome interface cannot run. Is there a way to do this from the command line?
View 2 Replies View RelatedSadly I am unable to login to a particular user via the GUI, but that is another thread [URL].
I know that you can create a single backup file of all your emails and settings when you have access to the GUI in Evolution. Since I am unable to login to gnome (or KDE) but I am able to login to the command line by su to the user I would like to create a that evolution backup file. I will be reinstalling Ubuntu.
I've been running the Evolution mail system under Fedora-15/KDE for about a month now, and it has some very serious problems. I just noticed that it is available for SUSE, and figured that since KDE is the principal desktop supported by KDE the SUSE version may be fixed. Before I go through the very tedious process of getting the SUSE version to compile on Fedora, I'd like to know whether anyone has seen these problems with the SUSE version of Evolution:It ignores font control from the KDE Settings->Applications Appearance window, both KDE font control and GTK+ font control, also its own internal font control window.
It has trouble sending messages to an SMTP server, sometimes taking a l-o-n-g time, sometimes timing out. This can be temporarily cured by restarting it It crashes when a filter attempts to refile an outgoing message. It often asks if I want to recover messages that have never been lost. It often locks up receiving mail from a remote POP3 server. I can live with these, except for items 1 and 2, since I have workarounds. If you are fairly sure that you have not seen these problems with the SUSE version of Evolution
I had configured the evolution to send/recive email. After it had been configured, it could receive emails. Suddendly it can't fetch email anymore. In the inbox of evolution, there were about 200 emails. There are maybe 5K emails in the server, I guessed. I'm not sure whether it's the problem that there's one email in the server too big, so the evolution can not fetch it. The error of evolution is: error while fetching email. Evolution version: Evolution 2.28.0. OS version: Linux xxx2.6.32.9-70.fc12.i686.PAE #1 SMP Wed Mar 3 04:57:21 UTC 2010 i686 i686 i386 GNU/Linux I'm sure my network is fine, I use pop3 to receive email.
nslookup result:
$ nslookup pop3.163.com
Server:221.6.96.178
Address:221.6.96.178#53
Non-authoritative answer:
pop3.163.comcanonical name = pop.163.com.
pop.163.comcanonical name = pop3.163.idns.yeah.net.
Name:pop3.163.idns.yeah.net
Address: 123.125.50.29
Anyone know the secred magic incantation is get Evolution to either stop doing line wrap while composing email, or at least extend the line size?
View 7 Replies View RelatedThis is the issue: when replying to someone, the cursor defaults to the beginning of the date line (on date this and this, that and that wrote:...), and I have to press enter twice, and then up-key twice, to bring it to a proper situation where I can start replying.
Today the issue is a bit better, since I am using GVIM for editing, so I can just press O (or make any other good mapping for my needs), but I am using GVIM only for English emails (since with Hebrew it is not really... hmm... useful, still), so the problem remains.
I know it is a very "little" issue - but come on, 9 years and no solution?!
In general, it would be nice to allow one to customize completely the "date line"; for example, to allow one to decide that his reply line will begin like this:
(two empty lines, after the cursor!)
=====
Am Sonntag, den 09.05.2010, 13:04 schrieb Asaf Chertkoff:
> ...
> ...
Upgraded from Karmic to Lucid today (called myself giving someone else an opportunity to find the bugs). anyway... Firefox 3.63 opens pinned to the upper left of the screen in restored configuration. The window will not maximize. There is no title bar. There is no close/maximize/minimize button bar. Additionally Evolution window can be moved, but will not resize/maximize. There is no title bar/close/maximize/minimize buttons on Evolution
View 4 Replies View RelatedI prefer chrome and now want to delete FF all together, under U software center there is no menu to delete FF. Is there another way to this without messing up?
I see Evolution on the menu that is installed by default. I don't use and want to delete, but only choice in the U software center is to "install". I sense this maybe a bug, is there a manual way without messing up?
EDIT: sudo /etc/init.d/gdm stop worked, not sure why it did not before. Sorry for the whining!
I need to boot Ubuntu into a non-x, command line mode. So I can install an nvidia driver for my new GeForce GTX 260 (I had a GeForce 7900 running on my Ubuntu system using the synaptic open source 185 driver for nvidia, but there is no driver except the one I downloaded just now from nvidia's site for the GTX 260 card). That requires there be no X session running, not even in a separate domain so to speak. There is no rescue mode in Grub2. Recover mode in Grub still boots an X session (Gnome). Alt+F1 appears to be a clean command line terminal but even that does not work because the nvidia driver installer script sees through that ruse and knows there is an active Gnome session. I tried sudo /etc/init.d/gdm stop and that did not work. I tried ctr+alt+backspace and that did nothing.
What can I do? I tell you some days linux is just too frustrating, about to just toss the baby with the bath water and go back to Winblows. Bought a new graphics card today, and here I am stuck not being able to even install the driver from a command line prompt, geesh.
I had installed Ubuntu 10.04 yesterday. When I see the network tab, it shows it is connected to the web via eth0. I could download all the packages for updates.But when I try to connect to internet via Firefox, or by evolution or other software,I am unable to connect.The configuration of the ethernet card is proper as I checked that via terminal window.It is a peculiar problem, where I can download update pakages but unable to connect via browser or email client.when I ping to ubuntu.com is shows it is healthy and successful.I have a Acer dual core laptop, and connect to internet via wired lan .
View 9 Replies View RelatedI have a weird issue about url-handling: When I have an url in any application, and click it, firefox opens up in a NEW window, but does NOT open the url, instead the ubuntu-startpage...
This is totally against my settings: firefox is the default browser, and is set to open url's in a new tab. So, I have checked stuff in about:config, and even tried making an entire new profile. Checked evolutions settings, but too bad, nothing there.
I installed Phatch today hoping to use it to reduce the file size of some picturesI took for work.I originally took the pics with 12 MP camera and now want to email them to a few peopleas smaller files.I found Phatch, but the docs under man phatch suck...Would anyone mind sharing an example of how to make the above changes to adirectory of pics. My guess is it starts: phatch -vkc --desktop [action] [path]
View 3 Replies View RelatedI am using ubuntu operating system, recently I am getting one problem when i am using the system . system is automatically going to command line mode it is asking user name and password. After entering user name and password I can able to use the system only in command line mode. Again when i restart I am getting gui as usual. Please help me to resolve the problem.
View 1 Replies View RelatedIs it possible to instruct Ubuntu to start up (GUI) Graphical User Interface mode from (CLI) Command Line Interface mode? In the old days, you can type "win" in DOS to get into Windows - something along that line. Is it possible for Ubuntu in this case?
Yes, you can reboot to switch between the modes, but shouldn't there be a command for this?
I just modified the grub file in 10.10 in order to see what the text line boot is like. Well now I want to go back, but when I try to gedit /etc/default/grub it gives an error that he couldn't display. How can I edit the file to go back to gnome??? I am on macbookpro 6.2 tripleboot Mac OS 10.6, Win7 and Ubuntu 10.10.
I just loaded up the Ubuntu 10.04 onto a newly scratch built computer. It went to the desktop after loading up and asking for my password. I then navigated to SYS>ADMIN>DRIVERS and preceded with download of recommended drivers for Nvadia G430 on-board display adapter. Restarted the computer to activate the new drivers and it's stuck in Command Line Mode. I tried Ctrl/Alt/F7 to escape, along with a bunch of other things but nothing will kick this puppy into the desktop.
View 4 Replies View RelatedI like running sql queries from the command line.
Code:
sqlite3 foo.db "select * from some table"
How can I specify
Code:
.mode column
at the command line?
Since I upgraded my browser to Firefox 3.6, I've been experiencing this problem: when I click on a link in an email, Firefox doesn't go to that link. Instead, a new instance of Firefox is started (even if I've already got an instance of Firefox running), and that instance just opens my homepage. Of course I can work around this problem by right-clicking on the link, selecting Copy Link Location, then manually pasting the URL into Firefox. But I'd prefer to use just one click rather than 6.I'm using the latest official Hardy version of Evolution (2.22.3.1), and I've got Firefox 3.6 set as preferred browser (or "default browser" or whatever it's called in Ubuntu).
View 5 Replies View RelatedHow to installing ubuntu 9.10 server in command line mode?
View 1 Replies View Related