I am using ubuntu operating system, recently I am getting one problem when i am using the system . system is automatically going to command line mode it is asking user name and password. After entering user name and password I can able to use the system only in command line mode. Again when i restart I am getting gui as usual. Please help me to resolve the problem.
View 1 Replies
EDIT: sudo /etc/init.d/gdm stop worked, not sure why it did not before. Sorry for the whining!
I need to boot Ubuntu into a non-x, command line mode. So I can install an nvidia driver for my new GeForce GTX 260 (I had a GeForce 7900 running on my Ubuntu system using the synaptic open source 185 driver for nvidia, but there is no driver except the one I downloaded just now from nvidia's site for the GTX 260 card). That requires there be no X session running, not even in a separate domain so to speak. There is no rescue mode in Grub2. Recover mode in Grub still boots an X session (Gnome). Alt+F1 appears to be a clean command line terminal but even that does not work because the nvidia driver installer script sees through that ruse and knows there is an active Gnome session. I tried sudo /etc/init.d/gdm stop and that did not work. I tried ctr+alt+backspace and that did nothing.
What can I do? I tell you some days linux is just too frustrating, about to just toss the baby with the bath water and go back to Winblows. Bought a new graphics card today, and here I am stuck not being able to even install the driver from a command line prompt, geesh.
I installed Phatch today hoping to use it to reduce the file size of some picturesI took for work.I originally took the pics with 12 MP camera and now want to email them to a few peopleas smaller files.I found Phatch, but the docs under man phatch suck...Would anyone mind sharing an example of how to make the above changes to adirectory of pics. My guess is it starts: phatch -vkc --desktop [action] [path]
View 3 Replies View RelatedIs it possible to instruct Ubuntu to start up (GUI) Graphical User Interface mode from (CLI) Command Line Interface mode? In the old days, you can type "win" in DOS to get into Windows - something along that line. Is it possible for Ubuntu in this case?
Yes, you can reboot to switch between the modes, but shouldn't there be a command for this?
I just loaded up the Ubuntu 10.04 onto a newly scratch built computer. It went to the desktop after loading up and asking for my password. I then navigated to SYS>ADMIN>DRIVERS and preceded with download of recommended drivers for Nvadia G430 on-board display adapter. Restarted the computer to activate the new drivers and it's stuck in Command Line Mode. I tried Ctrl/Alt/F7 to escape, along with a bunch of other things but nothing will kick this puppy into the desktop.
View 4 Replies View RelatedHow to installing ubuntu 9.10 server in command line mode?
View 1 Replies View RelatedHow can I send gpg encrypted mail automatically from the linux command line?
I'm a little stumped on this one, I've tried using mutt but it doesn't encrypt mail unless it's used interactively.
Does anyone know if you can use the build in mail command to do this some how?
my fedora 14 did an automatic update tonight and on reboot it hangs displaying the "f" before the login in menu. The "f" is how I now feel.I do "fn+f2" as it is booting and it displays the sequence of loading items which report all is "ok" until it gets to "jexec services" and then it hangs.I do not know how to access the machine in command line mode and I am not sure what to do from here. I beleive the "jexec service" is a Sun Java item but I am not sure.
View 2 Replies View RelatedI like running sql queries from the command line.
Code:
sqlite3 foo.db "select * from some table"
How can I specify
Code:
.mode column
at the command line?
So, in finishing my nFlux slack current edition.I have set it up for users to do certain things in console
and one of the things I want is a way to view slackbook-2.0 in runlevel 3 console.I cant find a pdf reader that works in command line mode and I cant figure out how to either convert slackbook 2.0 pdf into html/text Or find a slackbook download that is html or text?I tried converting it using pdftotext, which didnt work very well So, I need a command line pdf viewer or a converter that works good?
Just in case someone can reply a silly question, I've quite forgot the vi/vim command to bring the cursor to the 1st char in the current line. I do remember that for bringing it to EOL is '$'.
View 14 Replies View RelatedIn order to avoid switching user, is it possible to open dolphin in root mode. If yes, what is the command, and the keyboard shortcut to enter it.
View 3 Replies View RelatedI need to execute evince from command line or from a shell script and open it directly in full screen, or start some program for presentation.
I mean:
$ evince (this opens evince)
$ evince /dir1/dir2/file.toview (this opens evince and the file.toview but not in full screen)
$ evince /dir1/dir2/file.toview 'in mode presentation'
The GUI for network configuration of Fedora is marvellous such that the configuration is almost fool-proof. But how can I make the connection by hand in the command line mode? It goes okay except the very last step. When I disconnect the eth0 interface from the right-hand side of the desktop GUI, I tested how to bring it back by command line but I failed. When disconnected, the ifconfig still shows the eth0 interface, with just the ip address portion changed.
I tried "ifconfig eth0 192.168.1.xx" to give it an ip address but the connection is still down even if the ifconfig shows an ip address for the eth0 interface. Then I tried "/etc/init.d/network restart" and "ifup eth0" and also "route add defaut gw 192.168.1.1" but none of these could accomplish the same work as a single click on the GUI to connect. I am very curious about how to do it in the terminal.
How do I install Broadcom Wi-Fi on Arch Linux in command line mode on an Acer eMachines EM350?
I assume that Broadcom STA should be the driver used and my USB key the way to install it with the help of another PC, assuming that I can't use a RJ45 ethernet connection on LAN.
How can I identify my system's motherboard from the command line?
View 5 Replies View RelatedI just booted into Linux and the Update Manager prompted me to restart. After the restart the GRUB interface I expect to see is no longer there and now it is just a command line that says press tab for more options. I have not got a clue with shell language as I have had no time to learn it as of yet. Do I need to uninstall and reinstall Linux or is there a command that can be typed that boots up the operating system. Even better if there is something I can do is there also another command that can bring back that interface I was used to.
View 3 Replies View RelatedI built Ubuntu desktop up from a server install. I'm using Gnome. I want to change the system's language, and I have no menu option to enter System>Preferences>Language Support. I need to either:1.) Install whatever will place that option in the menu.2.) Affect the change via the command line (preferable).I just can't figure out what to install and Google only produces GUI tutorials. =/
View 2 Replies View RelatedAfter installing the 10.10 Maverick Meerkat, I decided to have a new partition and install Windows 7 on it for development purposes. So this is the method I worked with:
Partitioned the hard disk with gparted
Formatted the drive in NTFS
Installed Windows
Booted into Ubuntu 10.10 Live CD and re-installed grub on the MBR Now after restarting the system a grub command line boots up. I was able to boot into ubuntu with the following commands:
Code:
find /vmlinuz
kernel /vmlinuz root=/dev/hda1 (or its equivalent)
initrd /initrd
boot
Is there any way how to load up the grub GUI with the options to boot up Ubuntu or Windows 7 respectively?
My computer is a netbook with no optical drive. I had a friend bring over an external CD drive to burn the live CD, but I don't have that now. Since then, I've messed up my install beyond easy repair, so I was wondering if there was a simple (or perhaps not so simple) command that would reinstall every package from the software repositories (I do have access to the Internet, just no GUI). I'm talking about a clean install here.
View 3 Replies View RelatedI love Ubuntu Linux - especially the commmand line. But I have to admit that, at least for now, Windows is more user-friendly - there's more software for it, more drivers, and more stuff just works.
Knowing that Mac is built on Unix makes me wonder if it's the sweet spot between them. But I wonder: how similar is the Mac command line to Linux's bash? Could I pick right up with using vim and bash scripting and git, etc? Would common commands like changing directories be different? Does anybody know an online "compare and contrast" resource?
Is there a something similar to DTerm available for Linux?
View 2 Replies View RelatedI'm a Linux newbie and don't know how to do a lot of things. Five months ago, I asked a friend at FreeGeek Columbus to delete the extaneous operating systems from my computer just leaving the one I used, and he accidentally deleted them all. No problem, I'll just reinstall when I get home. But everytime I try to reinstall K/Ubuntu, I get an error message saying
Installation Failed. The installer encountered an error copying files to the hard disk:
[errno 5] Input/output error.
That happens with four Ubuntu installation Cds, three live Ubuntu Cds, one Kubuntu live CD, and one Fedora live CD. I suppose there's a problem with my DVD rom. PCLinuxOS and openSUSE, however, do install, so those are what I've been using (I've only recently ceased with openSUSE, for the time being). Today, however, I got lucky trying out something different. I used an Ubuntu 9.04 alternative CD (not live as they abort when they come to the input/output error message) to install the base system and grub with lvm.
It allows me skip over software installation which is where the input/output error message happens. It boots to a command line. I don't know what commands to use to get the software to install from a mirror, or how to install repositories from the command line. I've never had Kubuntu, per se (only Ubuntu with the KDE desktop); so since PCLinuxOS GNOME 2010 (a rolling distro) is more stable and polished than Ubuntu 9.10, I'd like to fill my base system out with Kubuntu software.
I just started using ubuntu after being a long time windows user.
what i find really interesting is that in command line, i can type many programs and commands, eg firefox can be run via command line from anywhere. In windows cmd prompt, im used to having to run the .exe file by first navigating to it, then being able to run the .exe.
what i wanna know is how does linux know all the programs at the command line?
i've gotten my fedora 12 to the point where i can run python3 scripts from command line and can call up python 2.6.2 idle with the command 'idle' from command line. what command will call up python3 (3.1.2 to be exact) idle?
View 5 Replies View RelatedHow to create cron tab when DSL line down set automatically restart the network service while DSL line up?
View 3 Replies View RelatedHow would I find out what servers are running on my local system from the command line? I cannot find out how to accomplish this anywhere?
View 3 Replies View RelatedPossible Duplicate:
Version of Linux with a command prompt?
Which software of Linux to use for command line running? Since I am using MySQL to run from Linux and want to run Linux, which software to download in Linux? There are multiple ones. Can I run .sh scripts and learn how to operate on Linux using the command line? Also use MySQL as backend on Linux?
I have a Debian Linux desktop. I want to change the screen's brightness without pressing the brightness button of my monitor. How can I do this? is this possible in command line or is there an application to be installed?
View 3 Replies View RelatedI want to know the command, so that i can move back two days i.e. all the changes i made during the two day is rolled back .
View 5 Replies View Related
