I have installed Windows7 on a new machine. Before installing F12, I wonder if everyting is ok regarding boot process between Win7 and F12. Could someone confirm that I won't lose my Win7 install because of F12 installation?
View 4 Repliesi installed ubuntu after windows 7 but now i cant boot windows 7 i tried the start up repair and I've read through some questions answered on here and int figure out the problem i don't want to uninstall ubuntu unless it's my only option
View 9 Replies View Relatedi have ubuntu 10 and win 7 dual booting on one hdd, all of a sudden grub says error no such partition when i select windows at the boot menu. and i cant get to the win7 partition from ubuntu (to play music and stuff, this used to work, places, mount filesystem, 250 gigs whatever). i've tried the stuff in these links and nothing has worked so farpartition info
sudo fdisk -l /dev/sda
Device Boot Start End Blocks Id System
/dev/sda1 1 29094 233697523+ 7 HPFS/NTFS
/dev/sda2 * 29095 30401 10498477+ 83 Linux
I install Fedora 14 32bits the same way I install Ubuntu. First, make unallocated space for it (about 150Gb). During the installation setup, I select "use all continuous free pace" as partition option, coz it's fastest and easiest. /dev/sda/ is selected as location for boot loader, and leaves Fedora as default boot target. Installation process goes very smoothly, but when the system restarts. The computer boots up as if Fedora has never been installed, it goes straight to Windows7, No GRUB boot loader menu whatsoever.
troubleshooting attempt #1: at first I thought it maybe the GRUB compatibility issue between 32bits Fedora and 64bits Win7. So I tried out 64bits Fedora, doesn't work.troubleshooting attempt #2: then I tried to install the boot loader on the Linux partition (first boot sector of boot partition) and let Windows 7 controls the startup menu by using FreeBCD.
I have recently installed Fedora 15 KDE (with Dual Boot Win7) on my computer:Dell Optiplex 330, Intel Core2Duo- 2.53 GHz, 32 Bit, 2GB RamnVIDIA 8400 GSWhile going through the Guides mentioned here: for F15, I tried to install nVIDIA Drivers after updating the Kernel.suyum update kernel*rebootHowever it gave me some errors and then I did try the following method (as described in Missingbox studio guide)su -yum install akmod-nvidia xorg-x11-drv-nvidia-libs.i686 bootconf-gui kernel*develfollowed by Reboot.
I start my computer, I get the screen which shows that Fedora will boot in 3 seconds. This is followed by a black screen with a "Blue followed by white" Bar running towards right (where Fedora 15 is written)....It stays there for ever (I waited for 3 hours and then switched off my computer).Presently I am writing this post through Windows7.Is there any way I can repair Fedora through Win7 or by any other means.---------- Post added at 10:57 AM ---------- Previous post was at 10:51 AM ----------I remember the instructions (given by leigh123linux) that we should provide the following information
rpm -qa *vidia* *kernel*|sort;uname -r;lsmod |grep -e nvidia -e nouveau;cat /etc/X11/xorg.confI had it saved as a .txt file in my home folder.
I am a linux newbie, I have messed with it some (backtrack) but I don't know a whole lot. I am going to networking security and I am in a linux class now. We are using fedora. On my laptop, I want to triple boot. Right now I have just 1 partition, with windows 7 ultimate x64 installed. I want to triple boot windows 7, windows xp x64, and fedora 12 x64. I am getting ready to format my laptop now with xp installing first. Then I will do windows 7, and then lastly fedora. Do I need to do anything special while installing fedora last? I have a 300gb hard drive, and I plan on having 100 for xp, 150 for 7, and the remainder for fedora.
View 2 Replies View RelatedI installed fedora aside of windows 7 home premium 64 so I can choose which one to star. But its always fedora I set bios to boot from the cd drive and yes it ask me hit any key to boot from the cd so I can reinstall windows 7 but it's fedora again. It happens the same with the USB drive. I think I don't need to reinstall Win7, it's there in Hard Disk. I am new in Fedora (infact I installed Fedora today in the morning).
View 1 Replies View RelatedI had experience with earlier Red Hat Linux dual boot with Windows 98 and XP. I now have Fedora 9 and also a Compaq Presario CQ61 with Windows 7 Home edition. I have made it so that my Laptop now boots from its CD/DVD drive instead of the hard drive which it was. Only so far when I run Fedora's 9 Desktop Live CD everything seems OK until I get to a non graphics window for logging in and there I am stuck.how I am going to log in and go into Linux Fedora's windows view.
View 3 Replies View RelatedI am a major noob to FC12. I need to install Windows 7 Pro and FC12 dual boot. I first used the windows CD to create 1 250 Gig partition on my 500 Gig HD. Of course windows created the 100 MB system partition. I left the rest unpartitioned. Windows installed okay. I then booted to the KDE FC12 Live CD and installed FC12. I specified to use the Free Space remaining on the HD. The installation finished but now only boots into FC12 and does not prompt me for the OS I want to boot.
View 3 Replies View RelatedI'm a F11 user and I wanted to see the new Windows 7 and right now, the computer doesn't boot via grub.
View 2 Replies View RelatedI have read a number of threads relating to the bootmgr missing issue but I can't seem to apply the fixes to my specific situation, any assistance is most welcome; my details below. I have two HDDs
1 x IDE HDD running Fedora 12 which is allowing me to write this,
1 x SATA HDD which has win7 premium 64-bit, and up until the Fedora 12 instal, was the only OS.
Grub gives me two options for boot, they are: Fedora Other When I select 'Other' I get hte message :BOOTMGR MISSING My assumption is WIn7 located on my SATA HDD = Other what I might do to allow Win7 to boot.
[Code]....
I install Win7 firstthen I install Ubuntu in a separate partition it run ok with grublast i install fedora in a separate partition it run with 2 choice win7 and fedoraI use hiren boot cd to boot with mini linux and run grub 2.0 application on it.i set up and run i only use Win7 and booot linux error.
View 2 Replies View Relatedhow to dual boot XP, Win7 and F13? I ask this because I tried it a few weeks ago and I couldn't boot into XP. I installed XP, Win7 and Fedora in that order and when I tried to boot into XP from grub I got the message Code: Boot Mgr not found. Press Cntrl-Alt-Del to restart
View 5 Replies View RelatedI had a dual boot working fine with XP and F12 on two physical drives, all was well. Last night my friend helped upgrade my system, I now have 3 drives (20gig F12) (60gig XP) and (320gig Win7) now the PC only loads Win7 as I think my friend told bios to boot from 320gig. Has anybody here got experience with triple boot from 3 drives? Here is my guess, tell bios to boot from other drive and add Win7 to grub. Not sure how but that's my guess. Also what worries me is that win7 does not "see" the other two drives.
View 5 Replies View RelatedI installed Fedora13 to dualboot w/ my windows 7. I quickly found out that I don't care for fedora. I was referred to Ubuntu, and put Ubuntu 10.04 on in VirtualBox. Lo and behold, I like Ubuntu a WHOLE lot more! So, I promptly went to Disk Manager (in win7) and deleted the Fedora partitions (told you i'm a noob). Of course that was a poor choice, and I was only able to get my computer to boot again by reinstalling f13. neat.
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
SO what i was thinking is go back to Disk Manager, delete partitions sda 3,4, & 5 (the linux ones), then reboot from the Ubuntu live disk? But I don't know what the sdb1 partition is?
I just installed Fedora15 on my laptop. When the installation completed, the system rebooted and gave me a Grub Error 17. I logged in the rescue mode and got the following output from
Code:
fdisk -ls
Code:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0d8b0d8a .....
I had Windows Vista Business in my compaq presario CQ40-145 TU laptop, over which I installed Fedora 13, making the system dual boot. The Windows is set to be the default OS. Now I want to replace Vista with Windows 7 professional without affecting Fedora. As far as I understand, during boot up, the system enters Fedora's booting process and then gets redirected to Windows, and it is not directly windows even if the default OS is windows.
The reason behind not disturbing fedora is the updates, extra software and packages installed and the pain and time it took me to make my speakers, wlan and flash player work in it. I even don't remember the exact process of what I did. I don't have now so much time to search for it again. So I will take up only that way in which Fedora is not affected at all. And the second problem is my DVD drive is not working at all. So I'll like using USB stick for the same.
I have one computer with windows 7 (computername = windowspc) connected through a modem router to a computer running Ubuntu 10.10 (computername = linuxpc). Had Samba setup and working between them.
Decided to check out Fedora 14 (computername = linuxpc). so set up dual boot on the on the Ubuntu box and installed samba. When Fedora is running Win 7 only sees shares for Fedora. If Ubuntu is running win 7 cannot connect to any shares stating a bad file path. I understand that both linux oses use the same ip address and thats probably were Win7 must have problems.
Ran nbtstat r in windows and was able to swap the situation around i.e. win7 sees Ubuntu but not Fedora.
I would like to be able to set it up so that when logged on to either of the linux oses I would be able to see shares from both partitions in Win7. Or if thats not possible, to differentiate them in some way so that Win7 would recognise which os was running and display the shares accordingly.
Partition info:
sda2: Win7
sdb1: /boot
sdb2: LVM, containing , home, swap...
[code]....
I have searched and read threads about the Bitlocker, grub and TPM issues that might show up, but I can't draw any conclusions as some information contradict each other. To make sure I don't screw up my pc as thought I need to make a new post.
At work I'm supposed to run Windows 7 and encrypt the win-partition with Bitlocker. I have installed Windows, turned on the encryption and it ties into the TPM. But as I am moving over to the *nix department I want to run Ubuntu as dual boot to check everything rusn fine with all the systems I need. Before I installed Windows I partioned the disk:
1,5 GB for system/bitlocker requirement
147 GB for Windows, C:
85 GB which is empty where I intend to install Ubuntu (not formated yet)
I boot into Windows with my bitlocker/TPM key on an USB-stick. Without the usb-stick the pc won't boot. Now, before I try to install Ubuntu I want to make sure to do it the right so I don't mess up the Windows installation or won't be able to boot the pc at all.
There seem to be several "schools" to this. Some suggest I should have installed Ubuntu first, then Windows and then encrypt. Some say, no worries just fire away and install since you are not planning to read the windows-partition from Ubuntu. Or an alternative, install but make sure to deactive the encryption during installation. Some say, install but make sure grub is installed in (multiple choices) location.
I turn back to openSUSE and install it in my machine (win7 installed first),but i can't boot from win7. openSUSE doesn't boot from win7 (like ubuntu) and i can't see ntfs win7 partition from openSUSE. Why openSUSE is so complicated about dual booting
View 4 Replies View RelatedI'm trying to dual-boot Windows 7 with openSuSE 11.4, i was told that i should install SuSE after windows 7 as it takes care of the boot-loader and automatically detects my windows installation and not vice-versa,
But that is not true in my case.
So i had 2 hard disks one had windows 7 installed and one was empty so i decided that i should get openSuSE 11.4 on the empty hard disk and dual-boot it with windows 7 (that i already had installed). Downloaded the DVD, put it on a USB and installed SuSE on the other hard disk normally, it detected my windows installation on my main hard disk but i didn't touch that, only formatted my other hard disk to ext4
After the installation it booted automatically into SuSE, but now every time on a fresh restart the system boots automatically into windows. Methods i have already tried to resolve this and it didn't work:
1. Booted from the DVD and selected an "Upgrade" not "New Installation" so i could boot again into my SuSE installation which did work, checked my "Boot Loader" options from YaST and checked the "Boot from MBR" option instead of the "Boot from root partition" option, That Did NOT work.
2. Used the same method to Boot into SuSE with the "Upgrade" Option opened up the terminal and tried to install grub manually again using this link
[Code]...
So we install Windows 7 home premium. Then in goes the Ubuntu Disk. Ubuntu seems to think that the windows 7 partition is one big lump of unallocated space. Tried multiple re-installs of Windows 7, all concluding the same. A bit of googling told me that it has something to do with partition tables or something. I even tried to use Gdisk to delete Gpt from the windows disk, which - as I have absolutely no idea what any of it means, - resulted in me screwing up the entire Win7 partition hence win7 not being able to boot anymore.
i've seen on the internet include a lot of technical garble which I don't understand. I've been using Linux for a while, but as far as partitioning and dual booting is concerned, it's always gone smoothly for me up until now
I've installed Ubuntu 10.10 (64bit) next to my Windows 7, in SSD hard drive. I'm able to boot Ubuntu with no problem, but my problem is my Windows. When I try to enter windows 7, all I get is a black screen with one blink char, and from there it does nothing...
My PC:
cpu i5 760
4gb ram
mb gigabyte GA-P55A-UD3
gpu gainward nvidia gtx 460
I have the option of selecting between win7 and Ubuntu during start up, but when i select Ubuntu it goes to the first 2 lines of command and then restarts again. Windows 7 works fine. This is the second installation of ubuntu on this computer, the first attempt did the same thing (would not boot into ubuntu but win was fine) after i lost power. This time i shut the computer off for a full week while i was on vacation. I have switched between windows and ubuntu a couple of times and had no issue with this installation.
HP Pavilion
AMD AthalonII X4
8GB ram
1TB HD
AMD HD 4550
64-bit windows 7
wubi
Ubuntu 10.04LTS 64-bit
All stock and at cool temperatures.
I cannot boot into the Windows 7 partition, which I guess is /dev/sda1. I have Slackware installed on /dev/sda2 which boots fine, my /etc/lilo.conf looks like
Code:
/etc/# Start LILO global section compact
[code]....
I assumed this had to be a FAQ, but after hours of searching, how to do this on FC11, but that didn't work with the yum on FC10. I don't need a huge list, but at least the basics (ld-linux.so, and I imagine the C++ compatibility libs).
View 2 Replies View RelatedI wanted to know if matlab and solid works run well on linux and fedora especially.
View 3 Replies View Relatedi'm a web designer and I use adobe creative suite products for my work. I would like to know if Fidora is capable of running these applications with no problem at all as I am planning on installing a new operating system which is light and very secure. Please help me out on this one as I am really interested with Fidora's features.
View 5 Replies View RelatedTried to install Fedora 11 from CD Live, CD, DVD, USB. In all cases installation (actaully, the boot) hangs up with the screen suddenly frozen and getting into weird greenish-bluish-whitish colors (see screenshots attached). The laptop is Cameron Maxmedia with AMD PCS.
View 2 Replies View Related