Have recently entered the world of fedora.
I wanted to add my user in the sudoers group but when I give:
Tells me that I am not authorized.
I also tried to put before asking for the sudo password and then tells me that I am not part of the sudoers group ....
New install of Fedora 14, all updates applied. If a USB flash drive is plugged in, get a Not Authorized message when Nautilus tries to mount the drive. The drive does show up in Places in Nautilus. From a terminal window, if you 'su' to 'root', then:
mkdir /mnt/usb
fdisk -lu
mount -t vfat /dev/sdb1 /mnt/usb
WILL mount the device, can 'cd' into directories, 'ls' to list files, 'cat' the files -- all OK -- so the device itself is fine. But from a regular user account, it will not mount the drive. Did 'chown' on /mnt/usb and /dev/sdb1 so that the user owns everything. The same 'mount' command as above gives the message "mount: only root can do that". Disabled SELinux as a test -- same result. Searched around but only similar problem was in this thread (buried in the middle): [URL] That's where the sequence above was suggested, which does work as 'root'. Where else would permissions need to be set? And what changed? This worked automatically in previous versions of Fedora
A day ago I finally got around to upgrading the PackageKit installation that had been sitting for a week and a half, so I found a new upgrade for sudo available - the one that gives the sudoreplay command, I forget which version number it is exactly. When I try to use the sudo command I get this notice in my terminal:Code:Can't open /var/db/sudo/me/1: Permission deniedI didn't get it before. What do I have to do to make it open? I'm using SELinux in enforcing mode if that helps.
View 1 Replies View RelatedI have just completed install of Fedora 14 off the live CD and although I can download alright via Yumex if I download from the internet or Synaptic I get the message 'Not authorized' . I am at a loss because I have never had this message before, I am particularly trying to get the drivers for my Brother DCP385C printer but they will not install because of this message .
View 4 Replies View RelatedWhere is the SUDO file at, and remind me how do I add myself as a SUDO'er?
View 3 Replies View RelatedI am new to fedora (been using debian based distro's for the longest time). With the new release I decided to give FC13 (The kde 64 bit spin) a try. I told it to wipe my entire hdd and encrypt the partitions. The partition manager made a few LVM partitions which I assume are encrypted.
The problem I am having is that if I attempt to use an application that would normally need root access to run, I am not prompted to enter my root password. Instead, I am required to logout and log back in as root. Is there a way to make it so that FC13 will prompt me to enter in my root password so I do not need to log in and out? Or is there something Different I should have done during the install process? Also, what is the terminal equivalent of "sudo" in fedora, or is it still sudo/KDEsudo
I also have not used SE Linux before. Do I need to manually enforce the permissions for my applications and generate my own profiles for it, or is that done automatically?
I'm unable to change the setting of the actual printer on my system, cant even delete itthe system ask me the root password, after i enter it, i always get this message "There was an error during the CUPS operation:'client-error-not-authorized'."
View 8 Replies View RelatedFedora Core 13 updated just this morning and still having a problem when connecting drives to the system. I believe drives are supposed to be automatically mounted under /media/Vol-Name where Vol-Name is the label on the drive/partition. I, and everyone else logged in, get the following message: Is there some settings that controls this?
View 2 Replies View Relatedexplain the difference between these two commands. I'm currently reading about changing your mac address and both of these commands show up a lot. They sound like the same thing to me. Is one better than the other, or do you need to use both to change your mac address?
Code:
sudo ifconfig eth0 down
sudo /etc/init.d/networking stop
I have a problem when I want to use su I get this error:Code:su: pam_start: error 26I have googled it so I found this topic (http://www.linuxquestions.org/questi...r-26-a-615024/) but it didn't really help me. There was a reply on that topic and his question was what the output of this was:
Code:
ldd /usr/bin/passwd
and
[code]....
When I try to download certain packages through synaptic I get the message that the packages could not be authorized and it fails to download. While it can be circumvented through apt-get with a small confirmation message , I would like a way through it , so that I do not get the message in future.
View 1 Replies View RelatedSince upgrading to squeeze, when installing certain packages, I am getting a potential malicious software warning stating that some packages I am installing cannot be verified / authorised (sorry I cannot recall the exact terminology).
When I update my package information, I'm getting the following error so I don't know if the two could be linked?
W: GPG error: [URL] Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 07DC563D1F41B907
My sources list is as follows:
#
# deb cdrom:[Debian GNU/Linux testing _Squeeze_ - Official Snapshot i386 CD Binary-1 20100216-15$
[Code].....
I could mount/umount usb through pcmanfm. Recently I have upgraded my debian to wheezy. The pcman version is now 0.9.8 but now I can't mount/umount usb drive any more. It gives an error "Not Authorized" . I already have this at .xinitrcexec dbus-launch icewm-sessionbut no success. Even I have tried withexec ck-launch-session dbus-launch icewm-sessionIt also not helpful and additionally Trash stops working with this. Has anyone have any fix
View 4 Replies View RelatedWhen I input xhost
pt@pt-laptop:~$ xhost
access control enabled, only authorized clients can connect
SI:localusert
SI:localuser:gdm
SI:localuser:root
wWo is gdm? Is he a hacker?
That second 320GB HDD that I'm not authorized to mount is where my backups are. Now that I've reinstalled over the Lucid that I trashed on my first HDD I need those. The drive appears under "Places" in the side pane of Nautilus, but not sudo Nautilus. If I could see it under sudo Nautilus I think I could just right click and change permissions.
View 1 Replies View Relatedi used fedora14 system. "Unable to mount C 'Not authorized'"
this error appear at after i type a mistake command "chown my -R *" in path "/usr" by root account
and after i reboot laptop the mount doesn't work i tried to chown root -R , but it doesn't work. i have C/D/E NTFS partition in my win7
and i mkdir in /media/c
and when i use "mount /media/c /etc/sda1", it works
and i dont wanna use mount, i wanna in GHOME explorer direct click into C/D/E
I try use Rsync authorized by LDAP, but seem as this way is not available. Is that true?
View 2 Replies View RelatedKernel 2.6.21.5, Slackware 12.0
Code:
Code:
On the other hand
Code:
So, I do not understand why the notification "sudo: cd: command not found", considering cd is a bash built-in command.
I want to control Network manager from the command-line. This worked well enough in Ubuntu 10.04 (with cnetworkmanager, nmcli is another possible choice). Since the upgrade to Ubuntu 10.10 however, a D-Bus exception is raised when I attempt to activate a connection from within a SSH terminal:
org.freedesktop.NetworkManager.PermissionDenied:
Not authorized to control networking.
It may have to do with /etc/dbus-1/system.d/NetworkManager.conf; This issue occurs only when I am ssh'd into the machine; in a gnome session I don't get the same issue -- with the same (admin) user account in both cases.
Every time I try to mount usb drive a window pops up and says "unable to mount usb drive Not Authorized".
View 9 Replies View Relatedhave an installation froblem from .deb file.When i download any .deb file. run it and authorized it.then an error come like this.Screenshot.pngBut the no program run at the time.i try it after restarting computer but still this result come.
View 4 Replies View RelatedI've got a 10.04 server install, on which I installed a basic gnome desktop. But I've never been able to automount usb drives or DVD/CDs!?but seem for desktop. May relate to not having standard gnome install? I don't have users-admin to try that, and don't see install package.
View 6 Replies View RelatedFacing this issue where I need to ssh from a solaris server to Linux server.The flow is as below:
-Oracle Webserver on solaris server (oracle user) initiates a cgi script
-The CGI script then executes a shell on the solaris server that tries to ssh to linux server
Have already tried the below:
-Checked the permissions for the .ssh and related folder/files
-authorized keys updated correctly
-tried alternative ssh login from another user which works fine
Issue could be-
-I must try the first login manually, where I'll need to enter password and then the solaris server will get registered in the known_hosts of the linux server
-Cant do this because I donot have the oracle user access.
Please suggest a work-around to the issue that can be done from my end.
Or is it that I must simply ask the DBA to execute an ssh from their ends?
I want to control Network manager from the command-line. This worked well enough in Ubuntu 10.04 (with cnetworkmanager, nmcli is another possible choice). Since the upgrade to Ubuntu 10.10 however, a DBus exception is raised when I attempt to activate a connection from within a SSH terminal:
Code:
org.freedesktop.NetworkManager.PermissionDenied: Not authorized to control networking.
I have installed fedora-ds-1.0.4-1.FC6.x86_64.opt.rpm on RHEL 5 Enterprise, which I use for Oracle BIEE. Now I need to install the FDS in another RHEL 5 and mirror only the FDS.
configure the mirroring part for the Fedora Directory Server.
I have read a lot of questions from people wanting to take Debian (or some other distribution) and make its sudo command act more like the way Ubuntu's sudo does. I want to do the exact opposite, I want to make Ubuntu's sudo command act more like the sudo command from another distribution. ie I want there to be one root password
View 8 Replies View RelatedI create a shell file with different commands . I am able to execute it manually . Now I want to schedule this file hourly . For this where I place this file and where I configure for time .
View 6 Replies View Relatedwhere to customize the modules thing? I've always used Ubuntu and there was an asoundconf file where I could change these settings.Haven't been able to find the same sort of thing on Fedora. A lot of people say I should either edit the /etc/modprobe.conf file which is now deprecated and does not exist on my computer, or edit some alsa file under /etc/modprobe.d/ which i don't have either.I've installed all of the alsa packages through yum.
View 1 Replies View RelatedI am using Fedora 14 x86_64 (KDE 4.5.5) OS on my home desktop. I tried installing KVM (default virtual machine available in the anaconda installer). I find the performance of virtual machine too slow. For instance - installation of windows XP 32 bit took around 4 hours to complete and booting windows xp takes somewhere around 3 minutes. PCBSD installation took around 14 hours and booting PCBSD is taking around 5 minutes. The base operating system i.e.Fedora is blazingly fast. After spending some time in google search , I found few posts saying such sluggishness could be due to not enabling virtualization option in BIOS. I searched my BIOS menu, my level best, but could not find any such option available.I use intel E7400 core 2 duo processor with 4 GB DDR2 RAM. I use nvidia GEForce 7100/nForce 630i/PCI mother board and graphics card. I have installed nvidia proprietary video drivers from rpmfusion. Following is the output from hardware lister (lshw) for the CPU -
CPU
/0/4
product: Intel(R) Core(TM)2 CPU E7400 @ 2.80GHz
vendor: Intel Corp.
[code].....
I also tried visiting the BIOS manufacturers website, and found that there are no firmware upgrades available. So I wanted to know is there any way I can speed up my virtualisation or should try some other solution like virtualbox etc.
I was trying to configure squid 3.1 on fedora linux 13. It's working perfectly fine from the local host but unable to browse from local network even after configuring acl for local network.
Connectivity diagram is given below
Local Network (windowsXP clients) --> Squid Server --> Firewall--> Internet
(192.168.102.0/24) (192.168.102.25)
Linux server has only one network card which is configured with internal IP. Configured client browser with proxy address (192.168.102.24 and port 312.