Fedora :: Can't Login / Sort It?
Apr 27, 2010I'm new to fedora, and I used "chmod 766 usr" command,
then I got an message and suddenly changed usr folder like a file.
then i reboot the machine but then I couldn't login to the computer.
I'm new to fedora, and I used "chmod 766 usr" command,
then I got an message and suddenly changed usr folder like a file.
then i reboot the machine but then I couldn't login to the computer.
I've been using fedora now for a while without major problems - since yesterday. Last night i rebooted my computer and to my surprise, this is what happened:
The Fedora screen takes a little bit longer to load and after that, instead of showing the login screen, i get a black screen with a prompt blinking. I can log in on text mode pressing alt+f2 alright. Tried "startx", but that did nothing for me, i only get a backtrack list and a "fatal server error: Caught signal 11 (Segmentation fault). Server aborting. There's also something about checking the log file at "/var/log/Xorg.0.log" but when i try to open it i get a Permission denied message.
I have recently upgraded to ubuntu 10.04 on a machine which I installed the kubuntu-desktop package onto. After the installation I tried to login to a KDE session and my password is accepted. The login screen disappears before the loading splash screen for KDE appears, however this only stays on the screen for a few seconds before the login screen appears again and the drumbeat sound is played (as if you had just turned it on).
Note that GRUB works fine.
UPD (17:48:10 4/06/2010) I have re-installed plasma-desktop, kubuntu-desktop and kdemain packages and this has only caused a longer delay before the login screen is displayed again.
Please could somebody send me in the right direction to get this fixed. I have attached kdm.log.1 as a txt file as this may help diagnose some errors.
I am unable to login as normal user. I am sure that my password is correct. What are the possible reasons behind this and also the solutions. My /etc/password and /etc/shadow files are good and my login haven't set to /etc/nologin.
Actually this a question asked to me by a Novell(Suse Enterprise Linux) Regional manager.
I had a perfectly well running CentOS 5 system but with an old crappy monitor. I replaced the monitor by a bigger one, i did a monitor detect to make sure that CentOS would recognize the highest possible resolution. Then changed the display rsolution for the current user.
Now when i login as root just a black screen appears with a white mouse pointer and then nothing. I already deleted all the contents in the home directory /root but no improvement.
When i login as a new user X is starting perfectly.
Anyone have a clue what i need to do or delete to get X working again? I can nuke the whole box and do a reinstall but i'd rather not.
I installed goblin by run GoblinUI.ymp and logged out.
After I logged out, I chose meego as session type and tried to login again.
I entered correct password, but when I press enter after type password , display change to black and got some message and backed to login session again.
On the other hand, I succeed in running MeeGo Live CD(1.0.1 build 1.4).
I wrote MeeGo Live CD image on USB Flash Driver by using Win32 Disk Imager, and boot that one successfully, although it has some flaw.
Network Settings Window is stuck in workspace and can't move or close, so it cover other appication's window. Internet on toolbar is broken, so I have to run FireFox in application toolbar to use internet.
I'm using Netbook based on Atom CPU and GMA.OpenSUSE installed in my netbook is installed by KDE Live CD image.
Should I Use Gnome to use Goblin, because MeeGo is using Gnome? Or.... what is problem make Goblin doesn't work?
I'm still pretty new to the linux scene but kubuntu has been a great alternative to ubuntu (unity, ugh) until now.
It only started happening since i started messing around with play on linux but i dont think their related. I dont think its a driver issue either as ive switched between proprietary and default to no avail.
Basically after i log in, it takes over 3-6 minutes getting slower and slower before finally getting back to regular speed. So after a few occurences i decided that immediately after startup i went to system monitor and sure enough;
There is a process title "akonadi_contact" that is slowly growing in memory. There are also multiple occurences of it (usually between 6 and 9). they keep growing usually to the 500000k mark in memory usage before turning gray (swap storage??) and then eventualy the end.
What is "akonadi_contact"
How do i stop this from happening.
Is this a memory leak?
What options should I use when I'm using the sort command to sort the top 5 CPU processes (ps -eo user,pid,ppid,%cpu,%mem,fname | sort ??? | head -5) showing max to min usage?
View 2 Replies View RelatedWe switched from unix to linux and we have an old report that extracted data from a database, output to an ascii file and then sorted the results in the file based on different arguments. The report now blows up when it runs,and I can only guess it is because the options for sort on linux differ slightly from unix.For example, here is one of the commands issued from within the report app that ran on the old unix box:
if sort-sequence = "descending" then
'sort -t~" -f +3.0f -4.0 +5.0r -6.0 -f '
else
'sort -t~" +3.0f -4.0 +1.0f -2.0 -f'
I will eventually rewrite the report to store the data in a local table, but I can simply adjust the options to suit the requirments of linux. Basically, I need to know if this can be a quick fix for the short term.
I tried a number of times to install dual boot with Win2k. I keep getting errors at the stage of setting up the partition for the install. When I try to choose ext4 it says Fedora cannot be installed on a bootable drive, fix the problem. I don't see how to fix it...it does not say what to do or change.
I have had other linux installed in the same partition without a problem. What gives?
150GB drive for both OS's Separate drive for data, not involved in the install.
| 72GB NTFS Win2K | 76 GB free for ext3 and swap |
LBA support on in Bios.
I just installed Fedora 12 on a laptop. I changed the default shell on the root account to /bin/tcsh and changed the runlevel to 3 and then rebooted. Now I can't login into the root account: it returns me immediately to the login prompt and I can't see any error message (the screen is cleared).Why is this happening?Can I boot into some sort of safe mode so I can undo my changes to the /etc/inittab and /etc/passwd file?I tried booting with a Live CD with the intention of mounting the filesystem and making the changes, but the new filesystem is a LVM and it won't let me mount it (or I don't know how to mount a Logical Volume).
View 3 Replies View RelatedMy computer was working this morning and both hard drives were working fine, then all of a sudden for about two hours I was stuck with this "problem", then after fumbling and moving and stablizing things, then Windows works? See below for details. I've finally reinstalled both hard drives, but the one with the Linux partition doesn't work: it says nothing is discovered on the disk. I can't login at the LUKS login after grub starts, therefore I can't get into Linux, but Windows works?! I used to be able to go directly into Grub when the computer starts, I forgot how to do that but it doesn't matter. If you need details I'd be glad to provide them. I just wondered why Linux doesn't work, but Windows does. I have Linux & Windows on two different separate hard drives
View 5 Replies View Relatedyesterday I updated my fedora 13 to fedora 14 (on laptop) and today i cannot log in on user. It just go blank for a sec and is back to login.
At text console (alt+ctr+f2/f3) i enter my username and pass it give this for a sec and resets (clean) console
username: Name
password:
last used: [date]
login: no shell permission denied
i used unetbootin (fedora 14 netinstall to update) and later i updated 1,5G before reboot (did update that fix, forgot its name tho :s)
I would most likely reinstall everything, but i have some work at laptop and as death-line is near, i would prefer to fix it if possible.
edited:
i have installed F13 on unused space, is there a way for me to access and fix it? or at least get some files from there?
Whenever i am trying to update my newly installed Fedora 12 it is giving the following problem
code..
What to do?
I recently installed GTK-Recordmydesktop to record my desktop, and it doesn't play correctly in Totem. So I installed VLC. It won't open at all no matter how many times I click it. I tried in a Terminal, I got this code...
View 1 Replies View RelatedI've just come around to KDE4, and I'm still getting used to it. I still don't like the new Kickoff menu, so I switched to the classic style.How the fartmonkey do I tell K to always sort the entries in the launcher menu alphabetically? Right now they seem to be in some random order that I can't even decipher. This is going to keep driving me mad until I figure out how to sort the stupid menus!
View 1 Replies View RelatedI am a beginner in linux and i have installed fedora 14
i have problem in mounting the cdrom
blank cds are not mounted
tried a fedora live cd, its mounted
because of this i am unable to burn cds.
I have fedora 10 and vista in my system. however,all was working fine ,but suddenly today when i tried to boot into fedora , i found that the avahi demon was not starting , and when the systemn booted , a message was shown that thre wasn't enough memeory space , and a blacjk scereen was shown , then i booted into vista and tried t acess the linux partiotion by Explore 2f software... At first it showed not enough memory space , but on rescanning the partition,it is showing the /boot folder.So how do i delete some data in fedora ?
View 1 Replies View RelatedCant see all my memory in fedora 11 I think I need to update my kernel but I don't know how.
View 5 Replies View RelatedI was lucky enough yesterday to get some help finally getting flashplayer installed
but now almost any page I try to load is crashing and I don't know why?
Now I have upgraded to FC12, but:KDE doesn't start : kstartconfig4 does not exist or fails. Error code is 127
X-Chat doesn't start and
may be others as well.
I was looking for a way to download the pictures from my camera (preferably with detecting pictures already downloaded) and then sort them in sub-directories with names YYYY_MM_DD by taken date.
View 2 Replies View RelatedI just installed F12 on my machine. Installation worked fine, system boots and then the trouble begins. There are many programs that fail to start, all of them have the same error-message when I start them from my terminal code...
Do you have any idea what might be wrong with my system?
My fedora 12 laptop will no longer boot properly. i get my bios screen, then the fedora intro screen (with the f / infinity symbol on a blue background) after a brief blank screen, then i get a blank screen with a blinking cursor. i can type things but nothing happens when i do, and the computer never exits out of that screen.
is there anything i can do to correct this problem short of a reinstall? i really hate to lose some of the drivers i went to a lot of trouble to find and install as well as some software and some user files.
p.s.: the last thing i did before the problem was to use yum to install quite a few fonts (xorg-...) but it ran after that and i think even went through one reboot with no problems.
I'm using fedora 13 on my acer 532 when i installed pidgin it installed i saw its icon on the top of the page by the clock, then when i shut down and restart it does not appear in the Internet folder nor is there a icon what should i do to install pidgin to the Internet folder? show it appears and it is installed.
View 5 Replies View RelatedI read that Gnome 3 has a simple screencasting feature: pressing CTRL+SHIFT+ALT+r will start/stop screencast. Anyway on my new fresh f15 machine this feature is not available...it's a missing feature in Fedora or something is wrong with my machine?
View 1 Replies View RelatedOk, so i just got fedora 12 all set up in Virtual Box and got the guest additions and stuff so i can have max screen res. I went to set up compiz following this site (google Using Compiz on Fedora 12 as Linux Guest in VirtualBox) installed dkms, rebooted and now after it loads the bar at the bottom that says fedora 12, it gives a blank black screen with a solid white line at the top like a c prompt curser. Whats the deal here? did dkms break my install or something? Its on a vm so no big loss but id still like to know.
View 9 Replies View RelatedMy fedora system crashed but i can log into rescue mode
I'm trying to mount a usb drive but can't
i can see my usb by running fdisk -l
but when i run 'mount /dev/sdb1 /mnt/sdb1'
it never mounts the usb drive
Who has successfully upgraded going from F7 x86_64 to F9 x86_64 using the yum approach? I have had about 0% success getting everything to work correctly doing a fresh install of F9. Everything works correctly in F7( sound, firefox/flash, networking, samba, etc ), so I figure that starting with something know to work and upgrading to F9 might be a better approach that starting with F9 and having it guess.
View 7 Replies View RelatedI installed netatalk for Linux in Fedora 10. I managed to get the service starting correctly at every boot and from Linux side everything looks good. I even manged to tweak avahi-daemon to advertise my server on the network so would show in Finder sidebar (with a snazy tux icon). But when I try to connect to the server it asks me for username and password (as it should), but my password doesn't work. I changed my password, I even gave it a simple one to rule out possibility of "fat-finger"-ing. No success.
I tried many options in my afpd.conf file. Here is the latest code...