I'v installed conky (from the repo) on my Fedora 12 x64 box, and i'm very pleased with it. However I can't get it to start at login.I'v tried shell scripts that include a delay (i tried delays of up to 30 secconds), and there is no change.
View 5 RepliesI have conky installed and set up as a startup application, however everytime I log out and back in conky creates itself as a new window:
How can I get conky to start normally without having to do a manual restart everytime I login?
I use Opensuse 11 with fvwm. How can I get conky start automatically when I start fvwm?
I setup the conky under fvwm session for my Opensuse 11 but it won't start automatically. I am wondering how to write some kind of scripts to force it to start automatically and with a delay about 10 seconds after fvwm starts.
As the title implies, I have fluxbox and conky running in Karmic. The problem is getting conky to start at startup. Below is my ~/.fluxbox/startup file. I have searched and tried everything I have found to get it to work. Conky works beautifully when I run it manually. Anyway, here is my startup file:
Code:
#!/bin/sh
xmodmap "/home/doug/.Xmodmap"
unclutter -idle 2 &
conky &
exec fluxbox -log "/home/doug/.fluxbox/log"
Lines added before and after the conky line run perfectly. Unclutter runs, but no conky.
I just installed conky. What is the best way to get it to start when X loads? I am using KDE.
View 3 Replies View RelatedIs there a way to tell conky on which display to start. I have dual twin monitor setup and its starting on my secondary monitor.
View 10 Replies View Relatedhow do I make conky wait to start? I have read the post how to do it but when I try it says file not found.
View 9 Replies View RelatedConky does not start during start up.I used this script, It has execute permission also!But it did not start! What is the problem!It works manually when i run that script!
Note: It is not working in the background also at startup as i checked it -When is run killall conky it showed No such process
I recently upgraded from 9.04 to 9.10 and I have noticed an increase in loading time when logging in.What use to take less then 1 sec is now taking 3-4. It sometimes is able to start conky but most of the time it doesn't. When I manual run it after login in it has no problems starting.When I start a session with 9.04 I noticed it would go straight to fluxbox it would then take a few seconds to load conky and pidgin. When starting a session with 9.10 the loading seems to happen before the login manager passes control to fluxbox. When the login manager is finished pidgin is signed and ready, there is no more loading to be done.
Would removing the login manager and starting a session from the terminal be advisable? I only use fluxbox.
I have been wanting conky to run at start up... fortunately I got that part done (I am very new) but after that, even though my conky was not configured to stand on top of my applications it would, and I didn't want that so I added some more code, and now it disappears if I click over it, it is still running, just not visible.
Here is my code...
my Conky needed the Coretemp, and a friend of LQ told me to run modprobe, and it works greate! no every time I start my system, I need to run the modprobe to add the module to Kernel. How can I put the coretemp to start every startup? (I think there is somenthing to do with a file on the rc.module at /etc/rc.d/, but I'm afraid to do something stupid...) I want to make the conky running after start of the system. How can I do this?
View 2 Replies View RelatedSaid that all the config i find put all the info in one place of the screen, in this example on the right side:
url
or like conky colors where you can put in either side, or other complex examples that use folders with images..that at least i need one day to study all the variables it has...
What i want is something simple, in my black background i dont want images and effects, only white simple text.
My problem is: i want for instance my specs above, my log info in the middle, my music info bellow (above my clock) and in conky config i'm hitting my head in the wall....
For instance if i use my facebook script to appear in the midle how the hell can i put my music info bellow without ruined the facebook in the midle...do i need 2 conky configs?
when I type "conky" in terminal it returns with Conky: invalid configuration file '/home/user/.conkyrc' Conky: missing text block in configuration; exiting ***** Imlib2 Developer Warning ***** : This program is calling the Imlib call: imlib_context_free(); With the parameter: context being NULL. Please fix your program. I've tried completely uninstalling, rebooting, then reinstalling, still same error?
View 3 Replies View RelatedI have a problem with conky. It draws a black background instead of using pseudo-transparency. I ofc tried to achieve this with feh but to no avail. All the instructions here failed: Conky Hardcore! Conky transparency with KDE (3 and 4)
[Code]...
How to install conky forecast on fedora 14?
View 4 Replies View RelatedI have been trying to get conky up and going. I found a tutorial here: http://forums.fedoraforum.org/showth...stalling+conky
Now, I installed it with yum, however, I cannot open it with Ctrl+F2, and when I follow some of the steps in that tutorial, I had a couple issues:
[mcauley@laptop ~]$ chmod a+x ~/.conkyscript.sh
chmod: cannot access `/home/mcauley/.conkyscript.sh': No such file or directory
[mcauley@laptop ~]$ !/bin/bash[code]......
I use: Fedora12 x86_64 and
Code:
conky --version
Conky 1.7.2 compiled Tue Aug 25 10:34:53 EDT 2009 for Linux 2.6.18-128.4.1.el5xen
[code]...
Is there a way to get conky to show only eth0 or wlan0? My configuration only shows the wireless bit when wifi is switched on but shows eth0 all the time.
Temperature: I have nvidia card with drivers from rpm fusion, can conky give me the temperature of the card and the cpu?
I'm trying to set up conky so that it displays my Google Calendar, but for some reason, absolutely nothing visible shows up on my desktop when I run conky. Here's .conkyrc:
[Code]..
I would like to run Conky on my Gnome desktop, I've configured a .conkyrc and it works quite nicely if I launch it in a terminal. However .... if I set it to run as a startup application (by using /usr/bin/conky &), 2 unexpected things happen.1. Conky doesn't load2. My gnome-panel doesn't appearHowever, gnome-panel is running, as I am unable to launch another one.
View 3 Replies View Relatedconky draws the root background for sudo transparency, not the desktop image, so solve by using real transparency, but this means any desktop icon blinks or just vanishes, what to do,looked around for a while. but no further along, anyone else had this problem, anyone else solved this problem?
View 4 Replies View RelatedThe application is Conky running under Fedora 12 Alpha. This application is set to start upon logging in to the desktop and it does just that. It appears for a second or two and then disappears from view. Although I don't see it, top tells me it is in fact running. As a result of this unexpected behavior I kill the process and restart the application using the ALT/F2 run application tool. When I do this Conky appears on the desktop and stays in view.
View 7 Replies View RelatedI'm running F14 on an Intel i5 processor with a NVidia GT340 graphics card. Installation works great. Compiz Fusion runs too. At this point, the panels are a little unpredictable, in the sense that some items on the panels disappear and appear as they please; changes only come during startup. The userswitcher is usually absent (but not always). The show desktop icon is sometimes absent, and on a very rare occasion, the desktop switcher is invisible. For all of these items, space is reserved in the panel, and when manually added to the panels, that space is left blank; I can not move anything into that space. It remains reserved for the item that isn't shown.
Then I install conky. First installation works fine, shows all things that are called upon in the .conkyrc file nicely. It works fine until I click anything - even on blank space - on the desktop. Conky then disappears. The process continues to run, but it's no longer displayed. Upon reboot, all of my panels disappear, and I have no idea how to get them back. When I uninstall conky everything works again as before (the userswitcher being the least predictable item on my panels). When I reinstall conky, and add it to my startup items, it shows for a couple of seconds after log-in after which it disappears. I assume - but don't know how to check as I have no panels left so how can I run the system monitor - that the process keeps running, but it isn't displayed.
Recently came across this system monitor for the desktop (in PartedMagic).I liked it,thought it would be fun to play with. It bills itself as being for Ubuntu, but it appears to be available through the Fedora repo.I'm just wondering if anyone is/has run it on their Fedora install? The Conky site doesn't appear to have any Fedora related documentation. Note, I'm not looking for instructions, just wondering if any Fedora users are actually running it.
View 9 Replies View RelatedI'm trying to find how to schedule a process to start at a specific time (not on start up). How would I schedule a process/application to start at a specific time (if it matters, it will be a background process). For instance, have process abc start every weekday at 5am. I've done this for windows many times though have only been using linux regularly for a few months and haven't figured out the best way of doing this.
So far the best solution I have is to create a program that will start on boot and have it check the time and sleep until the required time and then start the required process(es) at the required time(s). But this seems more of a hack since I'd expect there to be a proper way of doing this.
I want to monitor my work on the terminal.I know we can use script command.But every time when I start the terminal, I have to type script to start it.I want to automate it. So where should I include this command so that it will start as soon as I start the terminal ?
MY WORK TILL NOW: I have put this "script" command in the .profile.The when I start the terminal, it became an INFINITE LOOP.I am able to "echo".Thats coming only once.....but if I write a "script" command then it is becoming an INFINITE LOOP.
I just installed TuxGuitar - very cool - and to get the sound to work I had to install Timidity++ as well. Before I start TuxGuitar I have to execute:timidity -iA -Osin a terminal window first, which is kind of a pain to do every time I run TuxGuitar.How do I get this line to execute on startup such that timidity is running when I start up? I tried adding that line to rc.local
View 13 Replies View Relatedwhen i start the computer i will have 3 seconds to choose windows xp or else it will go on linux but someone told me that by changing the grub.cfg when i start my computer i will have 3 seconds to start linux or else it will be xp is this true ? and if it is can someone explain me how to do it because i would like that
View 3 Replies View RelatedThe difference between: service httpd start & /etc/init.d/httpd start.
View 3 Replies View RelatedI've tried other solutions, but none work for me.Here is my .conkyrc
Code:
######################
# - Conky settings - #
[code]....