Ubuntu :: Brother HL 3040CN - Cannot Print Using Network / USB
Oct 21, 2010
New 3040CN on 64-bit lucid. Test pages from console work fine. Cannot print using network or USB. Can http to printer on net, and system recognizes printer when USB attached. Downloaded and installed Brother's cups & driver files (despite being labeled as 64bit, they were i386) No 3040CN found in driver selection listings! system-config-printer thinks the driver should be for an Epson Stylus Photo 2200!
Tried various generic and foomatic PCL printers.
Tried attachment to lpd://10.10.10.20/binary_p1 and socket://10.10.10.20:9100. No results with lpd address, jobs are just lost. With socket address, get blank pages. Can't find an lpd file for this printer online.
View 7 Replies
ADVERTISEMENT
Jul 5, 2010
I have a recently purchased Brother HL-3040CN printer that I had been using under Windows XP. I'm hoping to use it on openSUSE 11.2 64-bit. Having consulted SDB:Installing a Printer - openSUSE I ran lpinfo -l -m | grep HL-3040CN as su... evidently this model is not supported.The Brother site Brother Solutions Center : Brother Driver for Linux Distributions seems to suggest maybe there is hope. I am relatively new to Linux.
View 3 Replies
View Related
Jan 1, 2010
I am running ubuntu 9.04 and am having trouble printing. My Brother DCP 330c printer is detected however I have to manually chose a printer driver all of which do not work with the printer. I have tried downloading a printer driver from the brother website and tried to install it.
View 2 Replies
View Related
May 29, 2010
I have just purchased a brand new Brother printer MFC-250C which includes a fax/copier/scanner but mostly its for printing photos however Ubunto 10.4 does not recognize this model! (it works perfectly over on my other partition with windows7 using the setup disk for Brother). I have installed everything related to Brother from Synaptic and searched the Brother web site for any drivers relating to this model and have even tried installing from Synaptic MFC-240C drivers in case they may work (no 250c available in synaptic) selecting PRINT for instance in Fspot my printer receives information for the photo but does not commence printing ..the same applies working in Gimp Gutenprint.
View 1 Replies
View Related
Dec 16, 2010
I'm having trouble printing on my Brother MFC-8640D printer. I've tried both Ubuntu 10.04 and 10.10, neither of which work reliably although a page will occasionally print. I can print just fine from my dual-booted Windows 7 installation. Thunderbird seems to always print OK, OpenOffice writer prints sometimes, other programs don't print at all or are inconsistent.
View 1 Replies
View Related
Jul 23, 2009
I believe I have installed my Brother HL 2040 printer on my Fedora 11 64 bit system. However, every time I click printer the printer goes through its warm up procedure but it does not print anything. There is paper in the tray and I know it was working when I was running Fedora 10. It is shown under the Printers heading under Administration.
View 4 Replies
View Related
Apr 17, 2011
I am unable to print on my Brother mcf 440cn printer. Every thing was working ok, today I finished some work in Open Office and could not print the saved file. I get an error unable to print msg. my printer is no longer recognized on the system. I reinstalled the driver no luck. I tested the printer with Windooze and every thing works fine
View 4 Replies
View Related
May 29, 2011
I have been attempting to get my Brother printer to read on my Ubuntu Maverick 64bit system with nothing but failure. I have downloaded all of the appropriate packages and I am now at the point where I am getting the following msg
sudo dpkg -i --force-all --force-architecture mfc6490cwlpr-1.1.2-2.i386.deb
dpkg: warning: overriding problem because --force enabled:
package architecture (i386) does not match system (amd64)
(Reading database ... 176291 files and directories currently installed.)
Preparing to replace mfc6490cwlpr 1.1.2-2 (using mfc6490cwlpr-1.1.2-2.i386.deb) ...
Unpacking replacement mfc6490cwlpr ...
start: Unknown job: lpd
dpkg: warning: subprocess old post-removal script returned error exit status 1
dpkg - trying script from the new package instead ...
start: Unknown job: lpd
dpkg: error processing mfc6490cwlpr-1.1.2-2.i386.deb (--install):
subprocess new post-removal script returned error exit status 1
start: Unknown job: lpd
dpkg: error while cleaning up:
subprocess new post-removal script returned error exit status 1
Errors were encountered while processing: mfc6490cwlpr-1.1.2-2.i386.deb
View 7 Replies
View Related
Jul 9, 2010
I am using debian Lenny and a Brother MFC-665CW printer. I am trying to print a PDF, but nothing happens. I'm not sure if I've ever printed in Lenny (recently upgraded from Etch). It worked fine in Etch. I "added" the printer again in KDE Print and it spat out a test page, but it does absolutely nothing if I send the document to print.
View 14 Replies
View Related
Oct 11, 2010
I just installed openSUSE 11.3 (Gnome GUI). All hardware functions pico bello (Agfa SnapScan e42), card reader ACR038, but ... I can't get my Brother HL-2030 to print.
It is not on the list of Brother printers to be chosen from, so I went to the Brother site in order to get the correct driver, where I can download, after having clicked on the Brother 2030 rpm, a file called cupswrapperHL2040-2.0.1-1.i386.rpm.
So, this is the first thing that surprised me : 2040 instead of 2030 ?
I then tried to install it by right-clicking on the item and then choosing Open with package installer but it returns this error :
nothing provides brhl2040lpr needed by cupswrapperHL2040-2.0.1-1.i386
I remember I had the same problem after installing openSUSE 11.1 but I was able to resolve it rather quickly. So, with openSUSE 11.1 I could print what I wanted.
View 3 Replies
View Related
Mar 6, 2010
I have been trying to get 5250DN brother printer to print envelopes correctly and Have tried installing the ppd and a host of other things and still within openoffice on karmic nothing works correctly I have also installed the brother package specifically from the repository via synaptic as well
View 2 Replies
View Related
Sep 12, 2009
I am having difficulty with my brother hl-2040 printer. Linux recognizes the printer and it's set as the default. The job shows up in the printer queue as completed, but nothing comes out of the printer.
View 5 Replies
View Related
May 24, 2011
I've recently installed F15 LXDE RC from the livecd and connected my USB Brother All-In-One MFC-5440cn printer. After following the Brother installation page, the Cups & LPR drivers are installed but when I'm in the cups page (http://localhost:631/admin), the printer will not print a test page or print from any application. The LCD panel on the printer does show 'receiving data' but nothing comes out. The last version of Fedora I had running was F13 and the same printer worked fine.
Are there any other printer drivers I need to install besides the Brothers? The printer does show up in the Print Manager but nothing prints. I did have this same type of issue with Mageia Beta 1 and ended up installing a2ps, which wasn't included in the original print drivers, and it is now printing. So I had to install a2ps with F15 but still no print output. Something must have changed with the recent distros causing this. After looking at the output of dmesg I see this:
Code:
WARNING! power/level is deprecated; use power/control instead
[14.867397] udev-configure-printer[587]: add /devices/pci0000:00/0000:00:13.2/usb1/1-3/1-3.2/1-3.2:1.0
[14.867991] udev-configure-printer[587]: parent devpath is /devices/pci0000:00/0000:00:13.2/usb1/1-3/1-3.2
[14.869115] udev-configure-printer[587]: Device vendor/product is 04F9:016D
[14.880470] udev-configure-printer[587]: MFG:Brother MDL:MFC-5440CN SERN:- serial:BROM5F412304
[14.880520] usbcore: registered new interface driver usblp
[15.902920] udev-configure-printer[587]: failed to connect to CUPS server; giving up .....
Any idea why it's failing to connect to Cups or any idea how to find out? Is it possible to have too many USB devices connected? I'm using a 4 port usb hub in use and also using a usb mouse/keyboard connected.
View 6 Replies
View Related
Apr 5, 2010
I am unable to get a Brother MFC-5460CN printer to print on a fully updated F12 system. Everything looks normal in Administration | Printing. All fields match the format shown on the Brother site. The printer status is updating correctly so there is communication to the printer. But jobs just queue and eventually show as printed but nothing is actually printed. There are no other printers. Here is the output in /var/log/messages from plugging in the printer and trying to print a document:
Code:
Apr 4 21:23:34 localhost kernel: usb 2-2: new full speed USB device using ohci_hcd and address 4
Apr 4 21:23:34 localhost kernel: usb 2-2: New USB device found, idVendor=04f9, idProduct=01b7
Apr 4 21:23:34 localhost kernel: usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=3
Apr 4 21:23:34 localhost kernel: usb 2-2: SerialNumber: BROJ6F904373
Apr 4 21:23:34 localhost kernel: usb 2-2: configuration #1 chosen from 1 choice .....
I followed the instructions on the Brother Linux drivers page and all the rpms loaded without error. But the log is showing some type of key problem.
View 12 Replies
View Related
Oct 16, 2009
It has worked in several releases 7.10 8.04 8.10 9.04 but stopped working in 9.04. I have tried everything (to long to list) need some bullet proof help!
View 1 Replies
View Related
Dec 14, 2009
I'm trying to install Brother DL-5250DN laser network printer. I have read the manual at [URL] and also I have searched the forum but I didn't find a solution yet. The problem is that I don't know what is the printer type that I have to select. None of the description really match for this printer. It is a printer which is directly connected to the network and *not* to a Linux or Windows machine. The only type that matches is AppSocket/HP JetDirect. I tried to cinfigure it with CUPS but it doesn't work. After I type the password nothing happens.
View 2 Replies
View Related
Aug 13, 2010
Can i setup both the hardwired network and wireless printer network options in slackware13.1 for Brother HL-2170W mono chrome laser with both wire& wireless network options? 3 Slackware13.1, 1 WinXP PCs, 1 mac and 1 windows7 Laptop. Roomie is buy and i am picking if this setup can be done. We have 2wire gateway Ethernet & wireless enabled
View 14 Replies
View Related
May 10, 2010
Total Newb here, sorry. I am pseudo-IT at work and have set up a desktop with Debian 5 (accidentally overwrote Windows in the process, but there you go). We are set up with network printers here (all Windows), and I was wondering how to go about being able to print to one of the network printers from my Linux desktop. Can I even connect to the Windows network with this desktop (it is hooked up)? Understand, I do NOT want to screw up anything on the network - they won't let me play anymore if I do. If I download the Linux driver, what do I do next?
View 2 Replies
View Related
Mar 27, 2010
I have a Canon MX860 network printer but I cannot get it to connect with my openSUSE 11.2 computer
View 9 Replies
View Related
Feb 21, 2010
I would like to print a document in Xubuntu, sending it through the network to my printer connected to my Ubuntu computer. Problem is, I don't know how. The printer works in Ubuntu, but I don't know how to set it up so I can print from Xubuntu.
View 2 Replies
View Related
Jun 4, 2010
I have a computer with ubuntu 10.04 and one with windows 7 and i want to be able to print from one computer to the other (both have printers) how am i to do this ?
View 5 Replies
View Related
Mar 15, 2010
I am trying to print to a network printer from my 9.10 install. The printer is Canon_MF4360-4390, when browsing for printers, cups finds it immediately. I found drivers for this printer online (driver is called UFR_II_Printer_Driver_for_Linux_V200_uk_EN). The drivers installed without any problems.
I can go through cups and add the printer successfully. I can even print a test page that shows up in the queue as completed. However, nothing comes out of the printer. Also, there is nothing in /var/log/cups/error_log to show that an error has occurred.[URL]..
View 3 Replies
View Related
Sep 6, 2010
The printer is connected to a networked XP machine that is accessible from Ubuntu.
I have set up the printer as instructed in this help file...
https://help.ubuntu.com/community/WindowsXPPrinter
SAMBA sees the printer on the network , verifies the printer and the driver loads.
Everything goes along just fine until "print test page" No go.
The printer shows up in the "Printing -local host" window.
Under "printer properties" the "Make and Model"are showing the correct device in the correct location.
The "Printer State" shows "idle - /usr/lib/cups/filter/foomatic-rip failed"
Is there something I might have missed in the set-up?
View 9 Replies
View Related
May 23, 2010
I recently installed 10.04 and unable to print to local or network printer?
When I go to System Admin/Printing to add my printers, screen says I am not connected to localhost and I am unable to use Add printer. When I used version 9.10, I added a network + a local printer by this method but I'm not sure what I have done wrong this time around.
View 1 Replies
View Related
Nov 30, 2010
I live in Japan and am trying to print to a network printer (Richo Ipsio C411 PS). Couldn't find the ppd in the foomatic database. At my previous school, I had no problems printing to the printers on the network once I found the ppd. A few months ago, I transfered to a new site. Unfortunately, when I send a print job on the network here, the printer just gives a Japanese message that says "command error." I've tried other printers on the network (all different models of the Ipsio).
I went to the Japanese Ricoh website and it recommended a generic printer ppd. I downloaded that, but it didn't work. Then I got the ppd off of the windows driver CD and tried that. Again, no success. I have no idea what I'm doing (obvious, but should be noted) or how to get this started. I also tried 2 versions of Ubuntu -- I'm running 8.04 and 10.04.
Attached are copies of the ppd files if it helps.
View 8 Replies
View Related
Feb 1, 2011
I have Linux SuSe 11.3 installed, the printer is Olivetti PR2, it's an old passbook printer, and the printer is connected VIA SERIAL port. When installing via CUPS, i have the option for serial port available, I am trying to use all possible drivers for the printer, e.g.:
- generic postscript drivers
- IBM Proprinter II drivers
- IBM Generic drivers
- any Olivetti drivers.
The printer is in READY status, printer seems installed in CUPS, when i try to print a test page, it creates a job, printer sets to status PROCESSING, but does nothing. No printing, no sounds from the printer self. How to check, if the printer is recognized as a device in linux, and if the data can be sent to printer at all ?
View 9 Replies
View Related
Feb 3, 2010
how do i combine these two lines to output all network interfaces on my machine?
View 1 Replies
View Related
Jan 12, 2010
I just came up with Linux/Xubuntu so I hope you I hope you'll excuse my "noobishness". I've Xubuntu 9.04 running on a laptop along with cups 1.3.9. I'd like to print on a toshiba 2820c which is connected to the local network. I tried to install it via localhost:631 what seemed to be working quite well since the toshiba is automatically detected and the driver (according to the printers manuel it's the same as for the 4520c) is already included. So I finish the installation and whenever I try to print something I am told that the job is sent and done but the printer doesn't even realise, that there was somebody trying to print something, at least there is nothing in the logs. I also tried to use the ppd-file from the toshiba-support but it failed again.
View 5 Replies
View Related
Jul 18, 2011
I have a Brother MFC-295CN network printer. Been having a heck of a time trying to get this thing working since I installed Ubuntu 11.04 yesterday. I've been away from Linux for some time and am new at using it. Downloaded and installed using the Software Center:
mfc295cnlpr-1.1.2.i386-1.deb
mfc295cncupswrapper-1.1.2-2.i386.deb
brscan3-0.2.11-4.i386.deb
brscan-skey-0.2.1-3.i386.deb
Was able to send a test print and it came out fine. But when I tried to send a print job - nothing. And, the scanner won't work either.
My computer is a Gateway GT5464. It's dual booted with Windows 7.
View 1 Replies
View Related
Jul 14, 2011
Fedora 15/Gnome3, latest updates as of 4pm EST 7/14/11.Trying to connect to a Canon inkjet printer, which is physically on a WindowsXP box via usb cable. Printer is made shared on the Windows machine.On the F15 machine, I can connect to all shared folders on the WinXP box via SMB.But trying to set up the printer connection from WinXP box to F15 is not working. I use Printing, then Network Printer, then enter the WinXP IP, then choose Find Network Printer. Note there's no CUPS or SMB printer choice - only AppSocket/JetDirect, IP, HTTPS/ and LPD. After a few minutes, I'm prompted to enter username and p/w for the WinXP machine, and the printer is located. Connection is verified.Connection is shown as Windows via SAMBA. I click OK and move to driver installation.
View 3 Replies
View Related
