Fedora :: Audio In - Audio Out Passthrough - Manage The Volume ?
May 18, 2011
The workstation is running FC14.
I have the audio out of the media machine passed into the line in on my workstation. It's just handly to have the audio pass in this way so that i can manage the volume or headphones or whatever from one machine.
This worked, and worked well, for a very long time. I recently reinstalled the workstion, FC14 still. After the reinstall, my passthrough doesn't work.
If i start up some media on the media machine, and then open up the volume control on the workstation, i can see the volume meter moving along with the audio, but nothing plays out of my speakers.
View 1 Replies
ADVERTISEMENT
Sep 2, 2009
First of all, this is not a rhythmbox issue, but a pulseaudio one. Everytime I click on next song (in rhythmbox or amarok), the master volume drops about 25 percent. Once the volume goes to 0, the volume cannot be modified without going into sound preferences and unmuting the volume for the application. This is *very* annoying. Basically, it means that everytime I click on next song, I need to follow that with 2 or 3 hits of up volume.
View 4 Replies
View Related
Feb 26, 2011
I used Gpodder to manage my podcast downloads and it works well for my needs. Currently I have been using Rhythmbox to manage the handling of my podcasts in terms of storing and playing. Because I don't have access to radio (I'm in India) I only ever listen to podcasts and I play them randomly throughout the day. My needs are quite simple yet there are a couple of frustrations with Rhythmbox that I'm still looking to improve, so is there an alternative? I've tried Banshee, which isn't much of an improvement on Rhythmbox, and I use Quod Libet for music, so that one is out of the question as I want to keep that exclusively for music, not podcasts. Here are my problems:
- Rhythmbox does not remember whether a track has been played after turning the computer off (or maybe after library has been rescanned). As a consequence I end up hearing the same podcasts. Why does it do this? This is illogical.
- I can't stop Rhythmbox from playing a track that has already been played. This is available in Banshee ('Repeat Off' feature).
- When I remove a track from my library in Rhythmbox (right-hand mouseclick and select 'remove') it is only removed in that session. It comes back when I reboot the computer or rescan the library. Then...
- When I delete a track from my library, it deletes the actual file from my computer. In Foobar I was able to permanently delete the track from my library but not from my computer. Is there a compromise between this issue and the one above?
- In Banshee I cannot change the display of the Browser. It seems to be showing 'Artist' in one window and then 'Album Art', Album. Artist in the window underneath. This is a pointless display for me. Because of the way podcasts are generally labeled the most useful tag to view by is Album.
- In Rhythmbox my favourite display is where the browser displays Album (I can't change it from Artist and Album but I can live with that), and where the library displays Title | Album | Play Count | Date Added. However I can't drag columns like I can in Banshee.
To sum up - I want to permanently delete from the library tracks that have already been played; only play a track once; have the media player remember my preferences after reboot; give priority to Album in the browser; have flexibility in the library to display any column how/where I want. I have tried Banshee and Rhythmbox and need a mix of features that both offer. I'm hoping I've just over-looked some features in either player.
View 1 Replies
View Related
Nov 18, 2009
I am having trouble getting the pulse audio server to find the hw0 with the common m-audio 24/96 audiophile. This card worked with previous versions of all forms of pulse but seems to bork on the HW0 function for audio out...which is a stereo analogue simple output. Audacity sees the HW functions but pulse does not! Here is a screen shot of the pulse crap. And another screen shot of what the real card at "alsamixer -c 0" sees. There is no dac or adc detected or configured with pulse. This does not make any sense as alsa and alsamixer has all the correct device controls available to any other software that uses the ice1712 driver.
I am using Fedora 12 amd 64 as a live usb on a 16 gig stick and want to be able to record and mix audio on to HD with my reliable high end m-audio pci sound card without having to mess with the pulse crap or having to install a full HD option. BTW in the pulse sound configuration gui dropdown list there is no indication of HW0 and the only devices that are available in pulse are digital outs.....go figure, so essentially I can see all the correct connections and use programs that access alsa directly eg: audacity but have no sound through the crappy and ever borked pulse audio server! Any suggestions as to how to remove all the pulse stuff that comes with most distros that use gnome? I have done this deed before with Ubuntu but do no know how to do the deed with an rpm based system. If I install a non pulse version of xmms and let it use jackd then I should have reliable sound for cd audio etc and should be able to configure VLC, Ardour and Nted well without pulse getting in on the action and screwing up my sound.
View 1 Replies
View Related
Apr 3, 2010
Right after I installed F12 on my desktop (using KDE), System Settings showed 4-5 audio devices.
At the beginning, sound wasn't working, so I promoted the Intel audio device to the top of the list and then I got audio.
Next login, the system complained that there were unmanaged audio devices and I chose to keep the configuration (or something like that...).
However, now only the "Internal Audio Analog Stereo" device is listed and I have no sound again
I also tried to promote the GStreamer backend over Xine, without luck.
Here are some specs:
View 2 Replies
View Related
Feb 16, 2010
I have a dual boot and my windows plays audio fine.My ubuntu plays audio fine as well however when I click on the Volume Control icon on the panel it gives me this error:No volume control GStreamer plugins and/or devices found.and I am still unable to control volume. I have alsamixer installed and it can control my system sound fine but all this time I've been able to use the controls on my HP Pavilion dv5250ca laptop's keyboard controls to control the volume and I'd like to be able to continue doing that- I haven't been able to for the last 2 days.
View 7 Replies
View Related
Apr 25, 2011
When I go into Sound Preferences I can crank up the output volume above 100%, making it audible from my monitor's built in speakers.
(this is for a kiosk that doesn't have room for extra powered speakers) Every time I reboot it resets output volume to 100%. Is there a way to change the volume back to 125% or whatever max is so the general public can hear the video that is played after a reboot? (this is to be a permanent installation that won't even have a keyboard or mouse attached, so automating this is a must)
View 2 Replies
View Related
Jun 13, 2011
Some of my movies have low audio - is there a way to have the final output sound maximized before output (independent of media player software)?
View 1 Replies
View Related
Mar 17, 2010
I'm having a problem with sound. No audio from speakers (multi boot system, audio works on other os). Plug in logitech headset, and very low audio volume (skype is not usable). Pandora is no output. lspci gives me 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
View 6 Replies
View Related
Jun 26, 2010
When I hit the Pulse Audio Device Chooser icon and then click on 'Volume Control' the volume control GUI flashes on for long enough for me to realise it has flashed on and then is gone again! If I run the chooser as root from a terminal (sudo padevchooser) I get this response when I hit the error:
Code:
**
** ERROR:(pavucontrol.cc:339):void StreamWidget::setVolume(const pa_cvolume&, bool): assertion failed: (v.channels == channelMap.channels)
Strange thing is, I have spent a lot of time working on my wife's laptop and Pulse Audio was working great (after many brain twisting, hair ripping hours of working on it) and indeed is still working despite the lack of GUI. This is all good except I want to change the output device for ringing in Skype and this is where I need to 'Move Stream ...' and can't get to it.
View 1 Replies
View Related
Jul 8, 2010
I achieved to create a stream of the audio output of my sound card. ices2 and icecast2. I receive it with an internet radio device (NOXON). Works alright, but the volume is far too low.
View 3 Replies
View Related
Jul 13, 2011
basically I was having some problems with the audio in skype, and as per the instructions on this page, I ran
Code:
sudo apt-get purge pulseaudio && sudo apt-get install esound
(note: using apt-get not aptitude). The only effect this had was to remove the volume indicator/menu from unity's top panel and didn't fix the sound in skype. So I did
Code:
sudo apt-get purge esound
sudo apt-get install pulseaudio
and the volume indicator is still missing. And the audio still doesn't work in skype.
View 3 Replies
View Related
Oct 25, 2010
I have a Dell laptop and have multi-media buttons, some of which control the audio volume. But once a game is running like Sauerbraten, I cannot control the volume. The controls within the game are relative to the master volume, so if the volume is too low, I have to exit the game to adjust it.
View 1 Replies
View Related
Nov 13, 2010
how can I adjust the volume level while recording audio playback and microphone at the same time? I managed to increase the audio playback volume with PulseAudio Volume Control (Input devices -> Monitor of Internal Audio Analog Stereo -> pressing green button "Set as fallback"), but once I click on that green button, no no microphone sound is recorded.
Details:
- using Ubuntu 10.04 LTS
- recording audio with Sound Recorder
- installed PulseAudio Device Choooser and PulseAudio Volume Control
- Input devices -> Internal Audio Analog Stereo --> shows the sound from microphone
[code]...
- how to adjust volume of audioplayback and microphone recording and record both as a mix together? Thanks!
PS: I checked out this thread, but haven't figured out how to adjust the volumes.
View 3 Replies
View Related
Feb 9, 2010
I am running Linux Mint 8. I try playing a video file.t plays but there is no audio and the ,movie player acts as if there was. How can I correct this
View 2 Replies
View Related
Dec 12, 2010
I am concerned about my tweeters in relation to signal coming from the computer. I have machine LINE OUT fed into my preamplifier (hardware audio component) all the time. The max levels of tuner, tape recorder, turntable, etcetera are all "equalized". That is, they all more or less deliver the same output level to the preamp. The difference between a CDDA level and that of another one is always minimal. The same goes for vinyls (not "so minimal"). As to radio broadcasts, one may be xmiting with great power and make differences larger, but still no harm for the tweeters, relatively speaking. Mine are 50w four-way loudspeaker systems (forgive the word, I used to call them baffles).
The power amplifier is 30w per channel so, theoretically, it cannot damage the speakers. But the preamp (Yamaha C-2) can deliver a very large signal. When this signal is unduly large, the woofer and mid-range speakers won't suffer. But the enormous resultant distortion can damage the tweeters. Some audio files have the signal recorded at very high levels. And I could launch aplayer, play or mplayer, or any GUI player, or I could receive an email audible notification when amixer's output controls are near the top and put my tweeters in danger. I think the core of the problem is the huge variation in level between different audio files.
View 14 Replies
View Related
Aug 7, 2009
I have behringer UCA202 usb card, after plug to usb, it just works , I have only small problem with alsamixer, which still shows by default my integrated HDA Intel, I could switch it by F6 or by alsamixer -c 1no problem, but I expect that default card is now plugged "USB audio", so why alsamixer recognize default audio device as HDA intel and not a USB Audio ?anyone who has two or more sound cards with the same issue ?
View 3 Replies
View Related
Oct 17, 2010
I'm thinking of installing openSUSE-11.1 Gnome on a Fujitsu-Siemens Amilo 7400M laptop because the wireless in Gnome is much more user friendly than KDE3/KDE4 in openSUSE-11.1. The idea is to give this laptop to my 84-year old mother and things need to 'just work' for her (she currently has a desktop running openSUSE-11.1 KDE3 that uses a WIRED interface to the web).
I refuse to update this laptop to openSUSE-11.2 nor 11.3 (nor other recent distributions) because every kernel update after the 2.6.27 kernel has broken the Intel i855GM graphics drivers for that laptop. There are many bug reports and none have fixed the problem for this Fujitsu-Siemens implementation of the i855GM graphics.
Hence I am looking at Gnome.
I booted the laptop to a Gnome openSUSE-11.1 liveCD and wireless is easy and works great. But audio is very very VERY bad. It is incredibly user unfriendly and it does NOT work well. I assume that is because pulse audio in openSUSE-11.1 was very immature.
I note these updated packages in the openSUSE-11.1 update repository:
Code:
So my question is, did the updates to pulse audio (in the openSUSE-11.1 update repository) fix the pulse audio situation? Are there ANY helpful views on this?
Currently my wife is using this laptop with KDE-4.4.4 (and openSUSE-11.1) so I can't just install Gnome and play with it without taking the laptop away from her for a while (note the hard drive is too small for a dual boot of KDE/Gnome).
View 6 Replies
View Related
Jan 10, 2011
How I would capture on-screen audio AND my webcam audio at the same time.(My webcam seems to rely on pulse).
View 1 Replies
View Related
Jan 30, 2011
I want to listen to this audio file: [URL] but my real player 11.0.0.4028 gold desn play it, it says that there is a codec 28_8 missing, I go to relaplayer page, download the last release available for linux systems, but the message is the same : audio codec missing and doesn't play the audio.
I havev tried to play the audio with smplayer (not luck), vlc can play the audio but the pause button doesn't work so I have to listen the entire audio all the time I stop it playing. Is there any audio player capable od reproducing in the proper way this audio in ubuntu? No one of my video players totem, smplayer, realplayer or vlc are capable of playing this video: [URL]
View 9 Replies
View Related
May 10, 2011
I have been using windows operating system for a long time now, but I am not well familiar with linux. Whenever I used to install Windows, I used to install the corresponding audio drivers(in order to listen to the music). The problem I am facing is that I do not know how to install the audio drivers(if they really exist in linux Mint 10 operating system). As a result I am not able to listen to any audio file due to lack of corresponding audio driver programs. make proper configurations settings so that I can listen to audio files in Linux Mint version 10.
View 4 Replies
View Related
Jun 7, 2011
to start off, i'll post the specs of the machine:
dell inspiron e1505
3.2 gb ram
1.86 ghz intel core duo
ati x1400 gfx
opensuse 11.4 kde 32 bit.
okay, here are the details: can't play any audio with amarok when desktop effects are enabled because the minute a window is moved, it will distort the audio. even when disabling desktop effects, some applications still cause this. can't play videos videos even with desktop effects disabled because of the same reason.
i just switched from ubuntu and when i ran version 11.04, i had to disable kms to do anything. i tried on opensuse 11.4 and the audio was flawless but the gfx went all to hell.
View 3 Replies
View Related
Jun 20, 2015
I'm using Mate on Jessie. The problem is that mate-volume-control kinda sucks as an audio control. It doesn't have nearly enough options for a proper volume control program. Pulse is much better for my needs. It or Alsa. Is it possible to remove mate-volume-control, or at least make Pulse the default volume control?
View 5 Replies
View Related
Jun 12, 2010
I'm still working on ubuntu 9.10 with an acer aspire 1810tz. To use my microphone I found out that I have to change my microphone settings because it's mono and the default setting is thinking it's stereo: With the Volume Controller I setup one chancel to 5 and the other to 90 and the mic is working fine. Starting Skype and using it I see that the setting is reducing the volume for the mic below 20, so nobody can hear me. I tried closing first Volume Controller and then starting Skype, no matter the volume of the mic is reduced. How do I stop this behavior?
View 2 Replies
View Related
Sep 20, 2010
I am fed up of listening to my (Windows XP) gaming computer through headphones so I want to get it hooked to the stereo.
Rather than use a heck of a lot of wire, I can sit my Ubuntu 9.10 netbook on top of the stereo and stream the audio across WiFi.
So, ideally what I am after is something to capture the outgoing audio on the Windows computer, stream it across the wifi to the Ubuntu netbook and finally play it through the speakers.
View 2 Replies
View Related
Feb 7, 2010
on my PC I have 2 sound drivers, one from the mainboard (AC97) and one PCI card (ES1969). Because the mainboard sound path did not recording, I installed the PCI sound card and with 11.1, I managed it to play and record all audio data. With 11.2 the PCI sound path plays the system sounds (suse start-up or shut-down sounds) but not the streaming audio data (skype, flash player). But these are played by the mainboard audio instead. The audio-tests from yast->hardware->sound work for both paths. How should I configure the system to redirect the audio streams to the desired (PCI) audio path? The PCI audio is set as primary sound card and is not muted.
View 2 Replies
View Related
Aug 23, 2010
Say I have 2 speakers connected to 2 different sound cards. Under Windows, is it possible to have some sort of virtual device that would forward an audio stream to both sound cards? If this can't be easily done under Windows, a solution for Linux is also fine. lternatively, if the 2 speakers are connected to different channels of a sound card, is there any vendor-independent way to duplicate audio to both channels?
View 1 Replies
View Related
Apr 9, 2011
What is available for ripping audio CDs besides Rhythymbox and Audio CD Extractor?
View 6 Replies
View Related
Oct 29, 2010
i have opensuse 11.3 (64-bit) installed. kde version. my sound card is a creative labs sound blaster x-fi xtreme audio, pcie interface. i am able to listen to cd music without any problems but i am unable to get streaming audio when i visit any internet radio site, videos, yahoo!tv, etc. etc. for instance, when i visit videos, the video part is ok but i cannot hear anything through the speakers. something similar happens when for instance i go to [url] and select any of the music channels. a new window pops up but the music never even starts to stream.
i know for a fact that both sound card and speakers work fine because i've tested them with windows xp. so there must be some setting in opensuse that i've missed. the weird part is that i can listen to music cds without any problems...
View 5 Replies
View Related
Sep 2, 2010
I'm brand new to debian and quite new to unix based systems in general.
I just switched to debian from ubuntu in search of something different and I want to find a system that works for me before I settle down.
I DO NOT HAVE A SECONDARY OS
just two problems I have with debian:
No sound
Error message: No volume control GStreamer plugins and/or devices found.
When I try to open sound from the speaker icon at top right.
I think it's a driver issue but Its not as easy as ubuntu was lspci:
My trackpad also does not work so I have to open documents manually if I don't bring my mouse to class.
View 3 Replies
View Related
