I'm getting 403 Forbidden error when I hit [URL] I disabled SELinux after trying some options. I still get the forbidden error. I've tried [URL] and [URL] as well, with same results.
[Code]....
the hard drive on my web server died so I replaced it and installed Fedora 15. I have been installing the OS on a small drive and then mounting other drive(s) for storage and did the same thing here. The problem is that I cannot get Apache to follow symlinks. Apache is partially working, it will serve my index.html page in the web page root directory and I made another directory called webtest and put some files in, and that worked fine. I made a symlink from the root directory to a folder on the mounted drive but when I try to access it, it gives me the old 403 Forbidden error. I also made a similar link in the webtest directory, I can view the other files in that directory but it does not show the link - also, trying to force it by typing the full path in the browser gives the same 403 error.
I have checked the permissions and SELinux types (using ls -Z) and they seem to be fine and I cannot find any .htaccess files. All the files on the mounted drive are owned by www:www but I also tried setting the user and group to www in httpd.conf and it still gave the same issue, so I changed them back to apache. I've been reading posts and sites on this for hours now and I'm still lost. I can post results of log files if they are of any use, I just wasn't sure what to post because it is somewhat working.
I am installing Big Brother on a CentOS 5.2 running the default Apache 2.2.3. When I try to access any web page I get the following error: Forbidden You don't have permission to access /bb/ on this server. Apache/2.2.3 (CentOS) Server at fmsubbnix Port 80 So far I have:
1) Set the Directory options to FollowSymLinks
2) Verified all directory and file permissions are at 755
3) Set permissions temporarily to 777 and received same error so I am assuming the issue is in a config file somewhere
4) in hhtpd.conf verified <Files ~ "^.ht"> is correct
5) verified the "default" directory is correct (/var/www/html)
I have read and tried several ideas in posts listed on the web but to no avail and am at a loss as to what to look for next..
this costed me a whole day of trying and retrying. I set up a small home server with apache, php, and mysql.
System infos:
Linux 2.6.31-22-generic-pae
Ubuntu 9.10 Karmic Server edition
Apache/2.2.12 (Ubuntu)
Until now, it served happily a couple of sites, with no problems. But now, I wanted to set up my ftp server to point to the same directory as one of the sites, for me to be able to upload and manage files via ftp. As a server I normally use proftpd. With my usual config, proftpd runs with its own user and simulates the user ftpuser:ftpgroup when creating files. So I just changed all the files to be owned by this user and group. Permissions set to 770.
Everything works fine, and I'm able to access the data via ftp. BUT, when I try to browse my site the usual way (i.e. point firefox to its address) a 403 forbidden error is issued. Of course, you will say: you didn't allow access to apache. Well, I remembered that right away, and added the user www-data to the ftpgroup user. Now I espect apache to be able to read and serve the files.
Still same problem. 403. The apache error log is full with "permission denied" errors. After many attempts, I logged in as the user www-data, and tested access to the files. This way I'm able to cd into the directory, and read-write the files with nano. As a test, I tryed the other way around. Setting www-data:www-data as the owner of the files, and adding the ftpuser to the www-data group. This way apache works, but proftpd does not. Most probably it has something to do with a misunderstanding of groups permissions or the way this two deamons access the files.
I am trying to get an internal webserver running and I am having issues with php. When I make a file (index.php) it runs perfectly. I can use PHP superglobals for the most part but the minute I use 'name' (ex: 'index.php?name=someone') I get a 403 forbidden. I thought for a while that it was something with all superglobals but if i change the code to use another variable it works fine.
works: ('index.php?person=fedora')
Code:
<?php
echo 'Hello ' . $_GET['person'] . '!';
?>
403 forbidden: ('index.php?name=fedora')
[Code]...
I have no idea if this is a apache issue, a php issue or something else random. I disabled SElinix in attempts to fix this, changed the owner and group to me and root and nothing seemed to have any effect. I also checked the document permissions in the httpd.conf and they all look correct.
I have searched the forum high and low for the solution with no success, so I will now post this problem, with all known facts. Linux (and Fedora) is brand new to me so I'm somewhat illiterate with the language and recommendations from reading other threads. Please bare with me. I'm reading the book Beginning PHP and MySQL from Novice to Professional by Cristian Darie.The book has you create an Alias directory for creating the tshirtshop web-based application.
The book uses the directory /home/username/tshirtshop. However, I did not want this in the /home directory, so I created a new directory from the root directory /workspace/tshirtshop. Below are the areas of interest in the file httpd.conf (I restarted the httpd service each time I edited this file):
Code:
DocumentRoot "/var/www/html"
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
[Code]....
I have apache working,i have users set under admin group in /home/admin/username/html that is with an html publicfolder at the end, now permissions are set right, /html is set to mode 777, and the contents also inside them. But everytime i do a 10.0.11.25/~les i get a damn forbidden error code, its got me so pissed off and i dont' know whats the problem. This is the error i get: Forbidden 403 You don't have permission to access /~les on this server.
Code:
[Tue May 05 19:37:48 2009] [notice] Apache/2.2.11 (Unix) DAV/2 PHP/5.2.6 configured -- resuming normal operations
[Tue May 05 20:44:30 2009] [error] [client 10.3.0.254] (13)Permission denied: access to /~les denied
[code]....
I am using the Desktop Version of Ubuntu Lucid Lynx, but I am posting here because I think all of you server guru's can help me. I am setting up my desktop as a mobile development server. I am hoping to eventually have it work with an intranet. Anyways I am trying to configure this and I hit a snag.
I have a 403 forbidden error. I've read around and I thought it might have something to do with SELinux
Here is my Virtualhost file
Code:
<VirtualHost *:80>
ServerAdmin webmaster@localhost
ServerName starace
DocumentRoot /home/chris/public_html
[Code]...
Since I upgraded to 11.04 on my Server edition I have been experiencing some problems with my FTP-server and Apache. Apache just says that the page is "forbidden" if I'm not logged in on the server, which means I need to go to the server and physically log in or I can do it trough ssh but then when I close my ssh client on my work computer the page is "forbidden" again. And I cant seem to reach the FTP-server from an external address so I need to be in the network to access it.
It says something like:
Code:
An error occurred opening that folder on the FTP Server. Make sure you have permission to access that folder.
200 Switching to ASCII mode.
227 Entering Passive Mode (192,168,0,194,233,166)
I'm lost I can't get past the 403 forbidden errorI have a directory /home/russ/public_html with a single index.html file
HTML Code:
<html>
<body>
[code]...
When I installed Fedora GNOME I could use my printer fine (But I had to change the recommended driver) Now, I switched to KDE and I plug-in my printer, It automaticly adds it, Now I have to delete it and re-add to fix the small bug... Except when I press "Remove Printer" I get "There was an error during the CUPS operation: 'client-error-forbidden'."
View 1 Replies View RelatedI am on mac os x and whenever I make aliases in my apache config file to point to folders outside of main web document root folder, I get access forbidden. I have chmod -R 777 the whole destination directory (to test it) and still no go. Access forbidden. I have also tried pointing directly to [URL].
View 1 Replies View Relatedi wanted to auto-start apache and mysql each time the server is turn-on so i read some document on the net that explaining how to do that - and it's good - the services are loading when the OS start.(as i said in the subject - i switched the runlevel 5 of httpd service to ON mode instead of the default - OFF)
BUT! the problem is that after i did it - for all of my apache's virtual-hosts i'm getting 403 - Forbidden notice.
when i doing it manually, mean, the server is load and then I'm logging-in with root user and do: 'httpd -k start', it's running perfectly.
i have hard filling that this 'runlevel 5' setting run the apache under user without permissions to those virtual-host folders (they're under 755 mode).
the mysqld service running ok with the runlevel 5 configuration! (2) - i'm using Fedora 12
I've installed webdav on my server and I can access it fine through cadaver. However, when I try to access it via nautilus, I get Forbidden. It is NOT secured (SSL). When I try to access it via firefox, I get an error since I DO NOT have "Options Indexes" in my apache config file. If I add this option in, then I can browse the root direction and webdav folder via firefox, but still not from nautilus. what other information you need. I've googled and searched the forums for awhile, but not "solutions" I found have worked for me. I want the webdav folder to just be a single folder within the direction, so this is how I have my config file setup:
[Code]....
As a side-note...when I included "Option Indexes", it allowed me to view the passwd.dav file from firefox!That doesn't seem very good...
I have the following message with apache:
Quote:
Forbidden
You don't have permission to access /site/home.html on this server.Apache/2.2.12 (Ubuntu) Server at localhost Port 80
home.html isn't in /var/www but in my /home/myname/site/ How can visualize my site in my local directory?
I am trying to use yum command to install mysql and php but I get the following error
yum install php Loading "installonlyn" plugin Setting up Install Process Setting up repositories Could not retrieve mirrorlist [URL]...[Errno 14] HTTP Error 403: Forbidden Error: Cannot find a valid baseurl for repo: base
[code]...
I am trying to browse in /var/www/directory and it giving me a following error. Forbidden You don't have permission to access /directory/ on this server. Apache/2.2.14 (Ubuntu)Server at localhost Port 80 I have just copied that directory to /var/www. What might be wrong.
View 14 Replies View Relatedrunning Ubuntu 10.10 and mozilla and seamonkey... Tried to access a website: [URL] and got the error: The page cannot be displayed You have attempted to execute a CGI, ISAPI, or other executable program from a directory that does not allow programs to be executed. Please try the following: Contact the Web site administrator if you believe this directory should allow execute access. HTTP Error 403.1 - Forbidden: Execute access is denied. Internet Information Services (IIS)
View 1 Replies View RelatedI am still a newbie at Linux, but have managed to get about 6 different Kubuntu systems up and all running a localhost test web server. I always start out with a server .iso and after installing I add a kubuntu desktop GUI. I have an old laptop that was running 8.04 server w/xubuntu desktop gui and it was running my test web pages through localhost. I got a wild hair and thought it was about time to upgrade to 10.04 server. I always do a complete install and this time I tried lubuntu desktop GUI. I really like lubuntu but for some reason can not get localhost to run. I get a 402 forbidden error. same error with 127.0.0.1 Here is what I get when I run this command
[Code]...
I am trying to download all the Heroes graphic novels off the nbc site. Originally I was downloading them via the provided links but with ~170 pdfs to download it was going to take a while I used wget to start downloading them a bit faster, I tried the command
$wget -N -r -l inf -p -np -k -A '.pdf' url
in an attempt to download all the pdfs at once, I got an error message
--2011-04-01 13:17:14-- url
Resolving url... 92.122.49.98, 92.122.49.235
Connecting to url|92.122.49.98|:80... connected.
HTTP request sent, awaiting response... 403 Forbidden
2011-04-01 13:17:15 ERROR 403: Forbidden.
Is this something I've done wring or something nbc have done to stop the use of wget?
I get "403 Forbidden You don't have permission to access" after attempting an installation of phpmyadmin.
CentOS 5.4
Permissions for directory set to 755 recursively (chomd -R 755 <directory name>)
Directory is in /var/www/html/
I have other test pages in the /var/www/html/ directory that I can access ... I know this seems like a permission issue and in fact the error log states this is a permission issue, but I cannot figure what is the problem here.
I have a web application that runs on PHP and MySQL on opensuse 11.4 (web server) and opensuse 11.1 (database server).The web application uses a .htaccess file that causes my site to error with error "403 forbidden". If I add "+FollowSymLinks" at the top, it loads the application just fine.But problem is that I have an issue with the application, and they believe that my .htaccess file is at fault since it's custom. I hightly doubt it but wanted to eliminate that as a concern.
View 1 Replies View Relatedinstallation moodle on Ubuntu 10.04.1 LTS.at localhost show message It works!at localhost/moodle show message Forbidden You don't have permission to access /moodle on this server.
View 1 Replies View RelatedI moved from F12 to F14, I've installed using yum Apache, MySql, php, phpMyAdmin. That all works fine, I've made index.php with phpinfo() function and if it is in /var/www/html/ it opens in web browser. I extracted daloradius-0.9-8 in /var/www/hmtl/daloradius folder changed ownership to apache:apache set alias to myradius. When I point web browser to localhost/myradius I get error 403, forbidden. I moved index.php with phpinfo() to daloradius (overwriting old index.php) and same stuff happens. Error 403. What am I doing wrong?
View 4 Replies View RelatedTwo days back I installed had setup subversion for my laptop from the following link HOWTO: Setting Up Your Own SVN Server (Using Apache and mod_dav_svn) - Mark S. Kolich
I don't know where I messed up the apache server. Now I am unable to start the apache server. I get the following error message:
I have al ready Fedora 11 [Leonidas], and when i did copy my old website to /var/www/html/wiki i had this problem trying [URL] : Forbidden You don't have permission to access /wiki/ on this server... i had to type this commands:
[Code]...
before i using fedora 14, i was used fedora 8.... no problem in setting web server, all client (windows XP) can access my resources in var/www/html/index.html but after upgrade to fedora 14.... this is a problem
"forbidden you don't have permission to access.... apache/2.2.16 (Fedora) server at 192.168.1.1 port 80" i had disable firewall also set SELinux to permissive
I have a web server set up, and for a while I just let it show the default "test" page, but now I am wanting to actually show something of my own.
I downloaded a couple templates from the internet (free ones), and copied the first one to the /var/www/html folder (including subfolders for ./images and such), and it used an index.php file, but when viewing in my browser, it showed the actual text of the file, not the graphics and images and stuff.
So I deleted those files and "installed" the second template, which uses an index.html file instead.
I am once again getting the default "Apache is running but not configured" page again, even though I have verified multiple times that the index.html file is located in /var/www/html
if I include the index.html file in the path to my website, I get a 403 Forbidden, so I'm thinking it has to do with file ownership or permissions.
I placed the files there as "root", and have tried several combinations of possible permissions (root:root is the owner:group) without any luck.
But after it updated and I restarted the service, it's reporting 2.2.0 on any error page. Yet through yum it's reporting 2.2.13-1. Is that normal? I've only ever used 2.2.x, starting with 2.2.6ish.
View 3 Replies View RelatedWhen I want to change my docroot in /home/Vincent/www or /home/Vincent/www/ it gaves me an.
:Syntax error on line 278 of /etc/httpd/conf/httpd.conf:
DocumentRoot must be a directory
I googled it already and they sad that you have to type in:
chcon -R -h -t httpd_sys_content_t /home/Vincent/www << doesn't work so I tried also chcon -R -h -t httpd_sys_content_t /home/Vincent/www/ But nothing seems to work?