This ess creates a custom bootable thumbdrive with the latest available Fedora 14 software. In addition, the rpmfusion repositories are preconfigured, and the list of software packages on the currently running system is used as the basis for the thumbdrive image
View 2 RepliesI have installed Centos 5.4 and then on top of that i have been installing many softwares over the time ( like pbx system , web console , billing etc.) and now it has come to a quite stable stage. the problem is i have to move this installation to another machine with different config etc. even have to install it on multiple systems. the idea is to create a bootable linux iso of the current machine with all the softwares so i can simply put it in a different machine and make it install and run without much fuss. is creating a linux appliance the only solution ? or is there any way to backup the current machine in an iso format and then install it on another machine? also i would like to make this completely hardware independent.
View 9 Replies View RelatedI'm looking for an app for Linux that creates bootable images. Back when I used windows, I used Imgburn. Now, I need an app like that for Linux. Wherever I looked online, I saw either one (or both) of these ideas.
1. Run Imgburn under wine
2. Get k3b
I don't like using wine because the programs run very slow. I'm not sure exactly how to get k3b to produce a bootable image. So that's where I'm stuck.
When I plug in a usb thumbdrive, it doesn't show up under "Places" (FC#14). The thumbdrive has a light on it showing activity, it looks like it flashes when I plug it in as if it's being read, then a steady light as if it's ready to do whatever I want to with it. lsusb shoes it, it just
View 3 Replies View RelatedJust spent three whole days barking up the wrong tree, solving Fedora 11 and Fedora 12 boot failures because the correct hypothesis was illogical: installation did not update/modify the initrd.
The first couple of times I installed Fedora 11 on the HighPoint Technologies RocketRaid 2640x4, the installation inserted my "custom" driver module (rr26xx) into the initrd, permanently, so that the system booted off the controller card for which the custom driver was inserted. (I yelled about this success in this thread: [url]
My most recent installs of BOTH F11 and F12 on the RocketRaid failed to properly set up the boot. It turns out that the "rr2640" module I "slipstreamed" into the installation process was *NOT* permanently added to the initrd by anaconda. (F12 gave me "no root device found boot has failed, sleeping forever", on boot; F11 hung also, without such error, I presume, during the init script execution). Because of limited resources and time, I only know for sure the module was missing from the F11 initrd, and am ASSUMING the same was the case with F12.
The only difference between the successful installs and the ones with failed boot is that the successful installs were made on a single-drive (JBOD) mode on the controller; whereas, the failed ones were placed on RAID 5. But, AFAIK, the created logical device for the card is "/dev/sda", in both cases, and the kernel can not distinguish between the two cases (or can it?). Thus, the inconsistency cost me a lot of time, and is still inexplicable to me.
Question: What is the best way to deal with custom drivers, today? There are custom spins, and many tools, like isomaster. Stupid question: Is there a way to modify the initrd inside an installer ISO -- be it for CD/DVD/USBboot drive -- beefing the init RAM disk with whatever modules you'd like, for the boot process (using, say, isomaster)?
And what makes anaconda understand that a module must be added to the initrd ? How can one force anaconda to do so?
How does moving to dracut as the initrd tool affect any/all of the above?
I have made a startup USB from an Ubuntu LiveCD already, but I was wondering how I might take a high-capacity thumb drive and install a number of different boot disks on it, from an Ubuntu LiveCD to a bootable floppy, and choose one at startup of the disk, kind of like Grub?
View 2 Replies View Relatedset up incremental backups with crontab. I just discovered that tar is not actually incrementing the tar files. I first created the tar files, then in crontab I have:
Code:
cd /; tar -cpf --incremental --exclude-from=/root/ExcludeFromTar.txt mnt/PATRIOT/bkp/home.tar home
I only just discovered that this creates a file whose filename is "/--incremental". I also tried using tar's -G switch instead of --incremental:
[Code]....
I have just got my Openldap server up and running howerver, I admit I'm a little confused about authenticating a client mechine to the server. When I create an account on the ldap server, does this mean that the server creates a user account in the /etc/passwd, or somewhere else on the server?
View 2 Replies View RelatedMy computer will not boot up and I have no boot disc. I believe the hdd may have failed. I am able to connect to the internet using my Playstation 3 but it will only let me download files directly to a thumbdrive. Everything I've seen so far needs a computer to extract the files to the thumbdrive which I can't do. Is there any place that I can download a linux distro directly to my usb drive without any intermediate steps?
View 2 Replies View Relatedwhen i try to delete, it says can not move to trash,so, how do I delete it permanently?In windows is shift+del
View 2 Replies View RelatedI'm using 11.4 KDE x86-64 on my Dell Laitude D620 laptop,I plug in my Corsair Voyager thumbdrive,it show the pop-up notice that an usb drive has plugged in,and showing option,but when I open it,it doesn't open,said that 'cannot open this usb device'.This thumbdrive is formatted into NTFS under Ubuntu 10.10 Disk Utilities,works well under Ubuntu,Debian & Windows OS,but not in 11.4.
Output of lsusb when the drive is plugged in :
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code].....
Now that I have system-config-display installed I tried to create a new xorg.conf so I can have 3D acceleration, etc using the correct driver. But the xorg.conf file generated does not work. It locks up the laptop (Toshiba Satellite A45-S250). I don't understand why this happens because the Fedora 12 Live CD (for i686) works find on boot.
I tried looking for the xorg.conf file after booting the live CD but it doesn't exist. I don't understand what is happening here. Also, when I used an older version of Fedora (8 I think) the X driver was i810 which worked fine. It gave me all the 3D acceleration, etc. When I installed F11 it gave me a dumbed down install using the VESA driver. What happened to the i810 driver? Why does the intel driver not work? Why does the Live CD work great but an installed system not?
Necessary info: Toshiba Satellite A45-S25 Fedora 12 (preupgraded from F11)
I've tried to do the installs using Unetbootin, LiveUSBcreator, and Startup Disk creator and the Install program from within the distros themselves, regardless of installation method the same problem returns. So I do not think the problem is related to method of installation.
Maybe it's hardware? I've tried a total of four different motherboards, (an MSI, 2 Gigabyte and an Asus) all with updated BIOS, all 4 of which work perfectly fine with normal Linux installations to the HD. I have no troubles running any of the above distros when installed to a hard drive.
The problem comes when I install to a thumb drive. Which thumb drive? Take your pick. I've used Sony, SanDisk, Kingston and a handful of cheaper brands in sizes from 2G up to 16G. The problem always returns regardless of the hardware involved. Therefore I do not think the problem is related to hardware.
I want a fully functioning installation of Linux on a thumbdrive. (I do not simply want a Live CD copied to a thumbdrive.) This will allow me to make changes to the software/settings and have those changes remain after rebooting. I'm able to do this just fine, and everything works perfectly until the third, fourth, or fifth reboot. At this point I enter my password and my password is no longer accepted. Sometimes the screen flickers a little, sometimes it just reloads the prompt. But it doesn't let me in. At this point it's Game Over. All the hard work installing and tailoring the install is down the drain. Yes, I've searched and found threads of this similar problem. Many of them go back to 2005 or 2006. The vast majority of them are people begging for help, receiving a few suggestions, finding no resolution and then the thread just dies. Honestly I've spent many, many hours following outdated advice that has, on occasion, worked, but only temporarily. The problem always returns. Something is seriously screwed up and I can't be alone.
So here I sit with a brand new 4Gb Sandisk that up until last night had a beautifully running Ubuntu 10.10 installation. And yet, voila, my password is now no longer good enough. It simply will not let me log on. I enter it, hit enter, and the log-in screen simply reloads itself.
if an admin decides this is security feel free to move, at the moment I can't decide where so posted here...On my laptop (msi-u100) my bluetooth stack creates rfcomm0 but is not applying the correct context label to it so selinux is bitching.
View 2 Replies View Relatedcreating a bootable floppy from a bootable floppy image on a NON Linux machine I am trying to install dsl (damnsmallLinux) on one of my old Compaq 2000 Deskpro machine having 256RAM and 2 GB hardisk. (which I hope to increase to 8 or 10 GB ...can I use a larger disk capacity??) I have downloaded the floppy bootable image from the website using a machine a fedora OS machine that does not have a floppy drive. I have even converted the image file to an iso file. I can copy this image file or iso file to the Compaq machine but how do I use it as a bootable floppy? OR how do I create a bootable floppy disk from this image?
View 6 Replies View RelatedI have a cdrom (bootable) that I want to copy over to a usb stick, and have THAT boot the system (Adding other files to it before hand) I know it's easy, but how? I've already made a iso of the cdrom.
View 2 Replies View RelatedHow can i copy my G4L bootable CD into a partition, so thar i can boot from it, and not use the CD anymore?The idea is based in the fact that i am so lazy ... that opening/closing the CD is getting on my nerves
View 5 Replies View RelatedIf I dd copy a bootable usb drive to an iso will the iso be bootable?
I haven't tried it yet, but i'm going to. Heres the situation and tell me if I'm crazy.
I have several bootable CDs I use at work to do different things, so I went ahead and made a multi-boot usb stick with the isos on them and everything is golden. When i need something else, I am able to slap the ISO on the usb stick, edit the menu.lst and I'm good to go.
The problem is, for some of our equipment I have a bootable USB stick that I have to use. I tried copying the files on the bootable USB to my multi-boot usb and setup grub to boot it (which admittedly I'm no expert at), but have had no luck.
So now I'm thinking, I'll use dd to copy the bootable USB stick to an iso (using bs=2048) and then do my normal setup with an ISO and maybe it will work.
I have slackware on a bootable flash drive, and the pc onto which I want to install slack won't boot from a flash drive. So how do I burn a bootable set of CDs from my flash drive?
View 2 Replies View RelatedIPtables creates an error during startup as well as when I try to restart it: Here's the output of:
[Code]....
The thumbdrive is disk /dev/sdc. Why am I seeing disk /dev/sdc1 with partitions like /dev/sdc1p1?
Code:
===> fdisk -l
Disk /dev/sdc: 15.4 GB, 15402532352 bytes
[code]....
I own a legit Windows XP Home CD, with time its getting more scratches so I want to make an ISO backup. I tried Brasero but the ISO it creates doesn't seem to be bootable. I don't mind using GUI programs, but I'd prefer to know the command line programs to learn more .
View 9 Replies View RelatedI have a cd iso that is bootable. I don't have any cd's in the house but I do have blank dvd's. How do I convert the CD iso to a DVD iso? I've tried using k3b but I can't do it in that.
View 10 Replies View RelatedI have a iMac G5 and an eeepc 1000 netbook, and I would like install Fedora 12/13 on it. I have downloaded the Fedora-12-DVD.iso, now that .iso is on my Mac, and I would like to create a bootable usb(8GB) on Mac using the iso file. I did find a few instructions on how to do this in Mac OS X [URL] however, they were concerned with .img files. If I am to expand the iso file I can see several .img files in the img folder and a few in other folder, which do I choose? The obvious choice seemed to be install.iso but it was only 166MB so I thought the whole system could not, possibly be fitted into such a file.
View 4 Replies View Relatedmy computer can't boot from DVD, there's a way to create a bootable CD to boot a DVD?
View 4 Replies View RelatedTried to make a bootable usb from dvd 64 bit iso (Fedora 15).
I get the following message.
I've recent begun to want to create a spin of Fedora for my high school to offer as an alternative to Mac OS X and Windows. My first attempt with any distro was to try and use Suse Studio, however nothing with packages that I downloaded myself would successfully compile. I then thought that I might try and use some sort of local program do create it with and tried Revisor, however when I made Live Media, Xorg wouldn't start and when I made DVD Install Media the kernel would kernel panic every time on boot.
Is there anyway to solve the problem with Revisor or are there any alternatives?
I have also tried using Ubuntu with the Ubuntu Customization Kit however that didn't work either considering I have to have it in a virtual machine.
I downloaded the *.iso for a Fedora 10 Live KDE installation. It is currently on my hard drive. I tried burning it to a CD with Roxio using two different methods. The first one was not a bootable method. So I checked the Roxio documentation and burned the image that way. In burning an *.iso to a bootable image on a disc, Roxio asks for three different file types, none of which are *.iso. I selected my *.iso because that was all I had. Then I burned it as a bootable to a CD.
When I tried to boot it, I got a black screen with a message at the top left reading something like there was no operating system available. I thought that was strange, and I do not know what to do.
I have downloaded a bootable DOS iso CD image that I have burnt to CD and can boot from.I need to add more disk checking utilities to the CD iso image.The DOS disk checking utilities are designed to be run from a floppy disk, but my laptop does not have a floppy drive, so CD-ROM is an alternative, if I can remaster the existing iso image file?Can I mount the DOS iso file and then add other programs to it, and then remaster the updated iso, and make a new CD-ROM to boot from with the added tools?
View 3 Replies View Related I've successfully created bootable DVDs for several distros over the years. First, I downloaded F13 x86-64 the day of the release, checked the sha256sum against the CHECKSUM file (it passed), and burned a DVD. I see 5 folders and 10 files on it, as expected.I restart, and my PC (AMD Phenom 9600 quad, Gigabyte S Series GA MA69G-S3H motherboard) does not boot from the DVD, but from the hard drive.So I get into the bios, check to make sure that the boot order is correct (it is) and try again. No joy.
Next, I assume I screwed up, had a bad burn, down load and burn again, checking everything. Still won't boot from DVD. Try getting the ISO from torrents, (checking sha256sum all the while), burn my 3rd DVD (using Brasero this time) and - same problem.Now I assume I have a hardware problem, and for grins, put in the F12 ISO DVD. It boots from there just fine.So I don't have a hardware problem, and I seem to have 3 good burns, but it's not recognized as a bootable DVD.