when im trying login in my web ftp with correct pass and username its automaticly refresh the page. I have instaled easy-wi for i can make servers, but ftp dont works. Second problem is cronjobs. i dont know how to enabkle for this panel.
View 2 RepliesI am running a script with nohup and this generates a lot of logs.
In order to view the log I use tail -f nohup.out
The problem is that the info supplied by this command is not always the latest//sometimes I need to use the command again order to view the latest info added to the nohup.out file.
How to refresh a page automatically?Say for example i need to refresh page in ubuntuforums to get new questions.I feel lazy to refresh the page often.Is it possible to refresh the page automatically in a specific time interval?I have tried ReloadEvery Firefox Add-on.But it refresh all the tabs.What i want is i want to refresh a page in a particular TAB.
View 4 Replies View RelatedI have just set up a high available San with 2 nodes which run on debian 7.
Replication and high disponibility works fine but i have some problem with iscsi.
I have create on 2 windows server 2012 1 iscsi iniator on each, my problem is when i create a file or a directory on one server, I have to put the hard drive offline then online and the change appear but it's not really useful.
So i would like to know if there is a way to automatically do this.
I just upgraded from a 1280x1024 17" to a 1920x1200 24".However, at 1920x1200, I do not have an option to change the refresh rate to anything but 60Hz, but Id like to run 70 or 75Hz.My monitor is an Asus PA246Q. Digital Signal Frequency : 30~83 KHz(H)/ 50~76 Hz(V).I am running Debian 6.Video card is an ATI Radeon 4850/1GB, and I am using the fglrx driver.
View 3 Replies View RelatedI'm trying to enable a non standad vertical refresh rate of my crt in squeeze/gnome under the radeon driver, which does work under lenny and fglrx out of the box without any additional manual configuration. I already tried adding the VertRefresh option to xorg.conf under the Monitor Section, but that didn't worked out so far. One strange thing is that if i look into the Xorg log file i can see a line which sais as if the driver can see the possible refresh rates, but still in gnome i cant set those refresh rates to be active
# /var/log/Xorg.0.log|less
(II) RADEON(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 85 kHz, PixClock max 180 MHz
These are probably only the rates which my crt can handle, but still im unable to set 1024x768x100Hz because the max i get is 85Hz for that resolution.
I just got a CRT monitor today, used of course, and plugged it in, pleased with many things. However, the screen is blinking subtly as a result of low refresh rate. This monitor is supposed to be 1024x768 @87 hz and 1280x1024 @66hz (here are the specs [URL]. I only get the following from Xrandr:
Code: Select allfoo@debian:~$ xrandr
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096
VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
  1024x768    60.0*
  800x600    60.3   56.2Â
  848x480    60.0Â
  640x480    59.9
Is there anyway I can get my desired resolution? I can't find the xorg.config which I read about.
I have three monitors, two Dells and an older LG all native at 1920x1080@60Hz and only recently installed Debian on this setup.
The LG is detected as running at 59.93Hz instead of 60Hz and this discrepancy appears to drive up the temperatures in my GPU constantly, even on idle, and introduces severe stuttering in any kind of graphical application.
I had the exact same issue with Windows 7 as well, but was able to fix it by changing the display settings of said monitor to 60Hz refresh, thereby returning the idle temps to normal and removing the stuttering.
My problem now is that I can't seem to change the refresh rate of this screen at all under debian.
xrandr -q returns that the monitor is running at 59.93Hz, but also shows 60Hz as available.
xrandr --output DVI-I-1 --rate 60
appears to have absolutely no effect, it doesn't error but it also doesn't change the refresh rate.
Trying to add a new mode with 60hz and modeline obtained from cvt results in the following:
Code: Select allxrandr --newmode "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
xrandr --addmode DVI-I-1 "1920x1080_60.00"X Error of failed request:Â BadMatch (invalid parameter attributes)
Major opcode of failed request:Â 140 (RANDR)
Minor opcode of failed request:Â 18 (RRAddOutputMode)
Serial number of failed request:Â 41
Current serial number in output stream:Â 42
I've also tried to set the refresh rate through the proprietary nvidia driver and manually through xorg.conf, both to no effect;
Here's my current xorg.conf:
Code: Select allSection "ServerLayout"
  Identifier   "Layout0"
  Screen   0 "Screen0" 0 0
  InputDevice  "Keyboard0" "CoreKeyboard"
  InputDevice  "Mouse0" "CorePointer"
  Option     "Xinerama" "0"
EndSection
[Code] ....
The driver settings will show 60Hz but the listing for the monitor in the driver and xrandr will still show 59.93Hz. Saving the settings of nvidia-settings to .nvidia-settings-rc was equally fruitless.
The settings on the monitor itself also show it running at 60Hz, without an option to go down to 59.93Hz so I got no clue where that is even coming from.
What else to try, besides buying a new monitor, which I'm not quite prepared to do yet.
I have install squeeze, wheezy. I understand there a glitch in nvidia-setting. So how can I change screen resolution and refresh rate in xorg.conf?
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (pbuilder@windlord) Sun Jun 13 06:03:17 UTC 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection .....
Is there any way to change the resolution and refresh rate of the graphical log on screen in Lenny? I have the right resolution and refresh rates set for after I log in but I don't know which file to edit to make Lenny use the right settings for the log on screen.
View 1 Replies View RelatedSince the upgrade from Lenny to Squeeze on my Notebook Toshiba Satellite Pro U200 with Intel Pro/Wireless 3945 ABG I have wireless connection problems.The connection breaks time to time and sometimes cannot connect automaticaly after restart. BTW I didn't change anything on the wireless or network configurations on the notebook and on the wiereless router.
View 8 Replies View RelatedI have a Insprion 14R (N4010) and when I hibernate it will usually restore without a problem, but maybe 15% of the time it will reboot while loading. I would like to figure why, since I'd rather not lose anything... My swap space is 5.9GB, I have 4GB RAM (video uses 1gb, so I have 3gb usable)
lspci says
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
[code]....
I do have the hibernate package installed...
I have a strange problem on my new installation of Debian "Stretch".
After "loading initial ramdisk" the pc freeze, but if I reboot it, then it doesn't freeze and so I could work.
So for work each time I have to boot and reboot the pc; the second time the pc works.
I've been using Ubuntu since 8.04 and I'm getting tired of it. Every time I update to the latest version, even if I wait awhile, something always breaks. I want an OS that I can update without having to worry about something breaking and I hear that Debian is great for that. I'll be installing it in a few hours when I get back from Iron Man 2. I just created this thread because I know I'm going to have questions. Don't worry, I'll try to solve any problems I come across myself before asking here. I'll be installing Debian Stable because I figure that'll be good enough for me.
View 14 Replies View RelatedI guess this might sound strange, but, I want to be asked all the time for either my user password or root password. I have searched high and low and all I can find is people wanting to disable asking for password. My guess is a majority of those users are ex-Windows users. I prefer to be asked as I feel it an added security tool. how to enable the system to ask for the user/root password everytime?
View 8 Replies View RelatedI have only one OS ( Debian 'Squeeze' 6.0.1 ) installed on this system. I observe a time lag which gradually grows. I was asked to install ntpd to prevent this from happening in the future and I did install it which seemed to work for a few days but now I observe the lag again. Just to note, I notice it only when I hibernate my system.
View 1 Replies View RelatedRecently due to partitioning and a power failure Ive had to now copy all my backup movies etc. back onto ubuntu as they are corrupted. At the moment the thumbnails of the movies are the generic orange media image and when I replace it with the backup movie, across to ubuntu and refresh the browser, the thumbnail stays the same i.e. it doesn't show a small screen cap of the movie. Is there a way to 'refresh' them properly as it were? I am running Ubuntu 10.10.
View 2 Replies View RelatedWhen I try to open two times Iceweasel I get this:Iceweasel is already running, but is not responding. To open a new window, you must first close the existing Iceweasel process, or restart your system.I am very suprprised, because in Windows xp I can open mozilla firefox 2,3 or more times.
View 4 Replies View RelatedImagine i want to power off my "Lenny" at exactly 16:00 everiday. no mather what I suppose i showld write a script with the shutdown command and add it to the /etc/init.d . but i will listen to your tips first.
View 2 Replies View RelatedI just installed Debian6-squeezie and upgraded to wheeny, that went fine for itself But now i discover that Debian INSIST in changing my BIOSCLOCKI realy dont like that. Its MY computer and I dicide MY SELF if i 'follow' winter versus summer time commercial brain-f#ck.
View 9 Replies View RelatedI'm not sure what the problem is but any browser i have crashes after some time of use, I've tolerated it for some time but its just too much of crashing, I have installed opera and chrome and both of them crash too..
View 13 Replies View RelatedI have debian jessie 8.8.1 Oscam and a phoenix card reader running on a tower pc. Everything works on reboot but when i leave it running then when i wake up in the morning the card reader has stopped working and does not show up in lsusb. The only way to get it working again is to reboot then it stops after x amount of time and the same problem.
View 2 Replies View RelatedThe in build cipher algorithms that are in the kernel are not critically secured, the best, I think, supports 384 bit encryption.
So I was looking forward towards stuff like DSA or very preferably OTP cipher with like... 8192 bit encryption using DM, I know it sounds insane, but so is the data. I want it to be uncrackable for the fastest supercomputer combined till 2070.
I would like to use one time passwords with ssh.I know there is the RC Devs openotp library but I have found very little information on the web about how to use this with ssh or even if that is possible.
View 1 Replies View RelatedI've created live squeeze usb-hdd with xfce desktop and if I start it, I have UTC time. Howto set fix to UTC+02:00, before image creation?
View 2 Replies View RelatedI have two mice, both are three button (left, right and middle) with scroll, one PS/2 and one wireless. The wireless is working properly and the PS/2 is not. The right button, the middle button and the scroll do not work.# X -configure has detected only one, which one? Do i need to put another Section Mouse1 for the second mouse? Why do i have on the Option "ZAxisMapping" "4 5 6 7" so many buttons? From what i searched it should have been Option "ZAxisMapping" "4 5" (that's for the scroll button, up and down).
Running Squeeze stable.
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
[code]....
There used to be a time out period, 15 minutes I think, and now when I am chrooting 6 or 7 systems I need to give a password for every one of them. This gets old. I am sure there is a way to do this. Sudo visudo does not do it. It will Work until I reboot. When I run it again, the setting is the sames as I set it the last session. I need to redo it, exit and then put it back to where I want it again. I figure I am doing it in the wrong place but can't figure it out and it is really getting on my thungas.
View 9 Replies View RelatedI have Squeeze with xfce desktop installed.
Howto set a "Time Zone" under xfce or which additional package should be installed to do that?
I use Firfox 3.6.13 with Fedora 14 but it seem work not well I have do some refresh before the web page come up. Is it the problem with Firfox 3.6.13 or Fedora 14?
View 1 Replies View RelatedI get the following errors when I try to refresh my repos (also this keeps popping up on my Update Applet)
Cannot access installation media Index of /update/11.2
Failed to download ./repodata/886603b5c7e8f047b48851b7cb7668c5676ddcf0-deltainfo.xml.gz from Index of /update/11.2