i am using an updated version of Debian GNU/Linux Squeeze and i just downloaded and installed tunapie from the software depositories but it doesn't work i tried to run it from a terminal and this is what it came out with
Code:
Traceback (most recent call last):
File "/usr/share/tunapie/Tunapie.py", line 23, in <module>
import wxversion
ImportError: No module named wxversion
how do i fix this
i just updated my version of python 2.6 to python 2.7 and when i just tried to run itwhats the problem here do i need to downgrade it or something
View 5 Replies View Relatedone of the coolest features of Fedora imho is sandbox -X, which I used extensively in F12. However, in F13 I yum install /usr/sbin/seunshare prints:
Code:
[...]--> Processing Dependency: policycoreutils-python = 2.0.82-13.fc13 for package: policycoreutils-sandbox-2.0.82-13.fc13.x86_64
--> Finished Dependency Resolution
Error: Package: policycoreutils-sandbox-2.0.82-13.fc13.x86_64 (fedora)
Requires: policycoreutils-python = 2.0.82-13.fc13
[Code]....
I'm trying to install Debian on Dell XPS L501, and there are lots of problems...
1- Resolution is 800x600! I guess, I need to add that there is no xorg.conf file, and I couldn't create it by running `Xorg -configure`. It said the number of screens didn't match number of detected devices or something like that! I'd be really happy if this gets solved!
2- Ctrl+Alt+F1/2/3/4/... doesn't work! Sometimes Alt+Directional keys works. but most of the time it doesn't!
3- I can't get the loud speakers to work, and I couldn't compile Alsa from source... I'll try again, but does anyone know if there is a specific package I need to install to get them to work? (Realtek ID 665)
4- Keys are not working right... Function keys don't work... But the worse thing, is that if let's say Fn+F2 is supposed to disable wireless, F2 does!
I cannot log on. I don't know if this is related, I was setting up for remote desktop, setup a password for the remote session. After rebooting, my normal user and password do not work and my rdp password does not work.
View 13 Replies View RelatedI have a motherboard Gigabyte H110M-H DDR3 1.0 and a VGA Nvidia NVS 300 (It doesn't have HDMI connector, but after Debian installation, it shows audio HDMI), After installling Debian 8.4 Jessie amd64, I noticed the sound doesn't work, the motherboard audio codec is a Realtek ALC887, I don't have a HDMI Monitor, nor my VGA has HDMI Connector, but is a little bit strange that Debian recognizes HDMI Audio, if a run "# cat /proc/asound/cards" it shows me two audio cards, the HDMI and the ALC887 and if I run "# cat /procs/asound/modules", both cards are using snd_hda_intel. It is installed PulseAudio and Pavucontrol, I have checked if the audio was muted, but the sound volume is set to 100%, I don't know what to do anymore... I have a computer with a realtek codec too, but it's another model ALC665 or something like that, and the system is equipped with an ATI HD 5450 with HDMI Audio, I have checked the what modules the Debian is using, and both uses the snd_hda_intel, but the sound works with HDMI and Realtek Codec.
View 8 Replies View Relatedi want to apt-get update. But it is not working.
[code]...
Is it something that is wrong in the source.list?
I'm trying to install Debian 5.0x to my miniITX computer.
Setup:
I had this setup running in a previous configuration. The only difference were the disks. I had a 120GB and a 1TB (/home). Because I need more space I swapped both disks for 2 x 2TB.
I tried a 64bit Debian 5.xx stable install. Everything goes fine until the first boot. After the POST and BIOS screen a cursor justs blinks and the computer does nothing. the computer doesn't start GRUB
Well I thought maybe a small error with downloading the DVD so I tried another debian but Testing now. There the setup hangs when it wants to make the file-systems. It says something like can't make ext4 filesystem. I also tried with ext3. So I manually tried to do fdisk and mkfs.ext4 (and mkfs.ext3) for both disks in the console during installation. fdisk works but when I try mkfs.ext4 /dev/sda1 it says that some bin-file is missing? How's that possible on an installation disc? Never ever had that before?
Well after 15 attempts (meanwhile lost 2kg of fingernails)I tried another 32 bit DVD install of Debian 5.xx. It can make the filesystems again and install everything but when it has to boot for the first time it just doesn't. I don't even see GRUB.
Seems to me that the computer doesn't refer to the HD to boot. In the BIOS the BOOT order is just fine (the previous config with the old HD's just worked fine). Even when I put in the install DVD it skips the HD and boots from the DVD?
I really don't get it. The disks are both shown in the BIOS. Is this a hardware or software issue? I think that Linux or GRUB should be able to work with 2TB discs isn't it?
I cannot restart my squeeze as a root user.I try:Code:# shutdown -r nowBroadcast message from root@WZHlinux2 (pts/0) (Fri Jun 3 23:29:33 2011):The system is going down for reboot NOW!
# init 6
but nothing happens.
BTW:
[code]...
When I type in "sudo apt-get in" and press TAB, it completes word "install".But when I logged in as super user and type in "apt-get in" and press TAB, it only beeps from system unit and doesn't complete "install". Why?
View 5 Replies View RelatedOn my debian jessie "testing" I have set in fstab some line to mount folder located on my pc server...
When pc boot up the error is
Code:
Select allFailed to mount /mnt/Web
See 'systemctl status mnt-web.mount' for details...
CIFS VFS: cifs_mount failed w/return code = -101
Then, after logging in, if I run mount -a all works correctly...
Maybe error was LAN that is not started? In this case how to resolve?
I'm running Debian Lenny 5.04, I switched from Ubuntu 'cause it was dissapointing me, there are lots of functions and gadgets but they just don't work and I can see it's fun thing to spend all your time fixing your computer IF you have no responsibilities at all.
For me on the other hand, I just want a system that works, doesn't look ancient and does not have it's head up it's ass. That used to be Debian, since installing Lenny however I noticed a couple of things that seem to have changed in the GUI. For instance, is there ANY STRAIGHTFORWARD way to install the REGULAR firefox with a REGULAR adobe flash player? And by straightforward I mean, using the systems strongpoint and installing it via a .deb-package.
This is really starting to piss me off, everytime I try following some idiot's tutorial on how to accomplish this and everytime it makes such a goddamn mess I can't seem to get it back to where I started and the system becomes really ubuntu-like ( instable). I just want a Firefox with working flash, that shouldn't be a problem anno 2010 right?
I have trouble with launch game on Debian 6(repo testing). code...
How to fix this trouble?
P.S. English — is not my native language.
get a GUI working after installing Debian. Now, I have another set of problems so I decided to create a new thread. the first thing going wrong is that when I type aptitude update I get the following output:
[Code]....
I want to download the driver for mi wireless, get openoffice and a bunch of other things, but with this not working, I'm guessing there's not much I can do now... I have the driver of the wireless, which I downloaded before the installation of Debian, and that I now copied to my new Debian desktop, but I cannot open it... it is a tar.gz file. I'm currently connected through wired connection by the way.
I cant log in as user. My keyboard doesn't work, not even ctrl+f1. So i cant get dmesg....Only thing that is working is alt+print screen+REISUB.
When i booted in safe mode from grub i can log in but only if i enter my root password. And then do /etc/init.d/gdm start.
If i tray to continue straight to gdm in safe mode my keyboard is not working so i can`t log in.
Day before i notices`d that i cant log in with ctrl+f1. When i tray i get this masage madone-desktop login: madone /bin/sh : cant open madone
I have an Atheros wireless USB dongle that will connect to my Wifi network just fine in Gnome but in KDE doesn't. I've read through the http://wiki.debian.org/WiFi/HowToUse and have installed all packages and tried all methods noted there but still can't get the wlan0 to work at all in KDE. Is wireless in KDE & Debian Squeeze useless?
View 3 Replies View RelatedI'm trying out a Jessie install and have noticed VNC doesn't work as well as it used to. I often install a desktop environment on a headless machine, disable *dm, and use vnc4server to create a desktop session if I want to use a GUI. When I try to do the same on Jessie, I run into problems.
Using Gnome, all I get is the generic "Oops something went wrong" error. Looking at .xsession-errors, there are some errors that hint at the problem.
Code: Select allXsession: X session started for ryan at Mon Dec 29 06:07:30 CST 2014
X Error of failed request:Â BadValue (integer parameter out of range for operation)
 Major opcode of failed request: 109 (X_ChangeHosts)
 Value in failed request: 0x5
 Serial number of failed request: 6
 Current serial number in output stream: 8
[Code] ....
Some possibly related bugs: [URL] ...
The same thing seems to happen with Cinnamon. Since I doubt a fix for the above issue will make it into Jessie, I tried XFCE. However, that doesn't work correctly either. When running XFCE via VNC something is misreporting the version of xrandr as 1.1 instead of 1.4. Since xfsettingsd appears to want version 1.2+, many things are broken.
This post on the Ubuntu forums suggests the issue might be fixed in xfsettingsd version 4.11: [URL] .....
Is there a better way of getting a remote desktop in Jessie that I'm overlooking?
I installed debian 6.0 (64 bit) systems, but in the "System - Preferences - Screen Saver " set idle time, and then select "activate creensaver when idle"and"Lock screen when screensaver activated, "but to No response after a set time. But by "ctrl + alt + l" was able to quickly enter the screen saver and lock the screen. May I ask how should I set the idle time after the screen saver and lock into?
View 1 Replies View RelatedI've installed the GNOME Update Manager (0.68-debian.7) from the official Debian package archive. However, after checking for new packages and clicking "Install the updates", the update manager asks for rights and then just checks for new updates again. Selecting different packages didn't help either, it just checks for updates again and doesn't update anything. Has anyone experienced the same problem
View 6 Replies View RelatedAfter using testing (now Wheezy) for almost a year and breaking my machine (latest nvidia broken packages), I went back to vanilla Squeeze (after updates, now at 6.02).Nothing from outside the stable repos; not even the nvidia driver (kept it at default and nouveau)Repo "deb http://www.debian-multimedia.org stable main non-free" enabled.It seems flash is not working with iceweasel; I either have a message which says "Cannot play media: you do not have the correct version of the flash player. Download the correct version," with a link to Adobe's site, of media appears in broken pieces.In order to keep my system "clean," I haven't downloaded anything from Adobe, and a search on this forum suggested installing flashplugin-nonfree or flashplayer-mozilla. Did both (can't have them at the same time), restarted, no joy.
~$ apt-cache policy flashplayer-mozilla
flashplayer-mozilla:
Installed: 2:10.3.181.26-0.1
[code]...
I was in 2.6.38.-2-amd64 and it was upgraded to 2.6.39-2-amd64. After the upgrade, every reboot disables the bluetooth mouse. There is a message from the panel with a bluetooth icon
Bluetooth Device
Authorization request from Logitec mouse...
check authorization
I push the buttons on my mouse and the button on the dongle to try and get them to pair, but, the dongle does not work. It is not scanning when I push the connect button.I unplug the usb dongle, and plug it in again, and this time I am able to pair them, and the mouse works. But, I have to do this every time I reboot which is a pain. I found that in the previous kernel, The Bloothtooh package is 4.91-1, but it has been upgrade to 4.91-2. So, this is creating the problem.
i installed debian 8.2 with gnome 3 desktop environment when i run this command
Code: Select alldconf write /org/gnome/nautilus/preferences/default-sort-order type i got this error
Code: Select allerror: 0-4:unknown keyword
Usage:
 dconf write KEY VALUE
Write a new value to a key
Arguments:
 KEY     A key path (starting, but not ending with '/')
 VALUE    The value to write (in GVariant format)
what should i do ?
also when i use gsettings i get
Code: Select all(process:4333): dconf-WARNING **: failed to commit changes to dconf: The connection is closed
So, as per Arch Linux's wiki, I tried to make some optimisations to the intel driver through setting it up in Xorg.conf (or as advised by that wiki article, in '/etc/X11/xorg.conf.d/20-intel.conf' ), but I've ran into trouble enabling DRI3. Here's my current config file:
Code: Select allSection "Device"
  Identifier "Intel Graphics"
  Driver   "intel"
  Option   "AccelMethod" "SNA"
  Option   "DRI"  "3"
  Option   "TearFree"  "true"
EndSection
So far everything works fine, I haven't seen any noticeable tearing, nor did I had any problems with any graphics-intensive programs I run, but there's a slight problem with the DRI3 part as indicated by Xorg's logs:
Code: Select all[Â Â 26.556] (II) Loading sub module "dri2"
[Â Â 26.556] (II) LoadModule: "dri2"
[Â Â 26.556] (II) Module "dri2" already built-in
[Â Â 26.556] (==) Depth 24 pixmap format is 32 bpp
[Â Â 26.616] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[Â Â 26.616] (==) intel(0): Backing store enabled
[Code] ....
First of all it still mentions the DRI2 driver, is this supposed to happen, or did something go wrong? Also it complains that it cannot find a file, which I can't figure out which package it belongs to, and taking a quick search around the interwebs hasn't produced anything useful...
The IGP is the CPU, which is actually a i5-4460... which according to Wikipedia it has a HD Graphics 4600 GPU.
I have installed VirtualBox and since then resuming from hibernation doesn't work again (my previous thread: [URL] ....). My question is: Can VirtualBox kernel modules (vboxpci, vboxnetadp, vboxnetflt, vboxdrv) break hibernation? If yes, what to do? Maybe unload them before hibernation, blacklist when resuming and load after resume? And how to do that with systemd? URL....
View 4 Replies View RelatedI installed the adobe plugin, and my browser crashes. I uninstalled it, and installed the one in the apt repository (mozilla-plugin-gnash) and it shows up in my about: plugins in iceweasel, but flash just doesn't play.
View 4 Replies View RelatedI'm running newest pidgin on sid and i have few problems. First of all notifications doesn't work (plugin is of course turned on), also even when i turn on blinking icon it's not blinking. Oh and why the tray icon is so small now?
View 1 Replies View RelatedI have problems with xrandr in a system with Nvidia GeForce 8600GT video card. I want to use xrandr to rotate the screen on the fly.
~:$ xrandr -q
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 320 x 175, current 1600 x 1200, maximum 1600 x 1200
default connected 1600x1200+0+0 0mm x 0mm
1600x1200 50.0*
1600x1024 51.0
[Code]....
I tried enable the last option, change values for xinerama and twinview, but nothing works.
Just as the title says: I installed iceweasel 6 in debian squeeze (via mozilla.debian.net) and while errors and requests are captured in the web console, I simply cannot use it to evaluate arbitrary javascript I type in it.
Does anyone have this problem as well? It's been like this since v5 as well. I already tried purging and reinstalling, as well as running with another profile.
I can't make a webcam working on an ARM version of Debian (Raspbian for raspberryPI)
I'm trying to use a command line media player to show the webcam images (mplayer)
The command is: mplayer tv:///dev/video0 and I got this output:
Code: Select allPlaying tv:///dev/video0.
the filename option must be an integer: dev/video0
Struct tv, field filename parsing error: dev/video0
Tv file format detected.
Selected driver v4l2
[Code] ....
Note aside:
- I've tried 3 different cams(got the same error for all of them)
- The output of the command: ls -ltr /dev/video* is crw-rw—-+ 1 root video 81, 0 Nov 11 09:06 /dev/video0
- The cam works in a program like "scratch" in a startx session but doesn't in the command line
Using coolbits allows for me to try to change it but it refuses to accept it, and even when i run it as root it still just acts like nothing has changed. It's not my laptop maker since i can overclock my gpu using rivatuner on windows so it's clearly not them trying to restrict me. I was attempting to restore teh clocks back to what the factory settings were from nvidia and not the underclocked settings that the oem put on it for the 3d settings and then reducing the 2d by ~10% to help it run cooler except when gaming.Has anyone been able to successfully use coolbits in squeeze? Or is there another nvidia overclockign tool out there besides nvclock since my gpu is apparently too new to work with it and i'm not going to risk it.
View 2 Replies View Related