When I try to run a script like this, it failed:
I must run the script like this:
This is the script:
These are the permissions:
And this is my user identity:
Why I can't run this script like the first try?
I follow the guide at the ink [url] to build xen on Debian squeeze.
At the step
I get the following error message.
Booting up fails with code 126. I am greeted with the following error everyime I start up.
Checking root file system.../etc/rcS.d/S10checkroot.sh: line 174: /sbin/logsave: Permission denied
failed (code 126).
It then says an automatic fsck failed and a manual fsck must be performed, then the system restarted. I have done a manual fsck and it did nothing. I booted up the system with knoppix and did it, nothing.
Sometimes I connect to my Debian box from another computer (using SSH on Cygwin or Linux), and once ina while I want to run some console apps. And sometimes some of these apps might complain about "another intance, Error: an instance of newsbeuter is already running (PID: 2496)". Is there a work around for this issue at all(without killing the original instance") ? The reason I do not want to kill the app because there might be 2 users connected to the same machine that might be using the same app.
View 1 Replies View RelatedWhen I try to connect to my wireless network I get the following error
"wap supplicant association request to the driver failed"
I see the adapter connect to my router and I even get a signal strength thats pretty good. But the connection times out and starts all over again. It will connect for 10-15 seconds with no connectivity and the drop. What can I do to allow the connection?
I have already done the following
changed the wifi broadcast to g/b mixed (it was n/g mixed)changed the wpa2 cipher to tkip only
I am running 11.04
*****edit*****
I could not get my adapter to connect at all. With the help of another user who had the same issue we could not get it working. So I installed 10.04.2 LTS and installed the driver. I no longer get the WPA_supplicant error, now it just times out. what can I do to get wifi? this seems quite ridiculous just to have a network connection...
I tried to install lame on Linux, but I failed running ./configure.
View 9 Replies View Relatedwhen i upgraded to slackware-current few days ago i tried to create packages with src2pkg and i get this:
Checking for Makefile rule: 'install' Okay
Checking support for DESTDIR (or similar) - Found DESTDIR
Installing using DESTDIR - Using:
make DESTDIR=/tmp/xf86-video-intel-2.10.901-i486-1 install
Notice - Possible error running 'make install'
FATAL! Running make install has failed with error: 1
Try using INSTALL_LINE 'make -i install' Exiting...
is it because of i have slackware 32bits i installed src2pkg successfully on slackware 13 but on slackware-current if i remove it and do src2pkg --setup i get error something like cannot live without it every time. when wanting to create src2pkg-helpers.
but i want to know what im doing wrong ?
before i created packages successfully. i execute src2pkg as root
when I run synaptic I can open the list of apps. and select but then I apply to download and get "error we failed to fetch etc etc." Seems to be an rpm problem but not sure. ????
View 1 Replies View RelatedI am learning Linux and I am documenting procedures for troubleshooting for any disk related issues and I would like to know the procedure to replace a Failed hard drive running Redhat 5.1 running LVM2.
View 5 Replies View RelatedIs growing raid 6 in 5.3 centos possible? I'm getting errors when i run mdadm in --grow mode failed : 'mdadm --grow /dev/md0 -n 5 2>&1' -> mdadm: Cannot set device size/shape for /dev/md0: Invalid argument Do i have to create a custom kernel for centos?
View 1 Replies View RelatedLately when I've tried to update my packages many of them don't update. I get nothing out of the ordinary when using the terminal but when I try to update via the Update manger I get this error message:
Code:
Error message:
Fetch failed: W:Failed to fetch bzip2:/var/lib/apt/lists/partial/mirror.steadfast.net_debian_dists_testing_main_source_Sources Hash Sum mismatch
W:Failed to fetch bzip2:/var/lib/apt/lists/partial/mirror.steadfast.net_debian_dists_testing_main_binary-amd64_Packages Hash Sum mismatch, W:Failed to fetch http://mirror.steadfast.net/debian/dists/testing/updates/main/source/Sources 404 Not Found [IP: 208.100.4.53 80]
[Code]...
I've tried several different mirrors but get the same error with every one. Same result with ftp as well. Yesterday I upgraded to Wheezy and every package successfully upgraded, but today the problem started again.
I needed to load Linux on a Samsung Q1Ex for a project I'm contracting on, and could not for the life of me get anything to run. Turns out that the video card is a chrome relative, and for some reason, almost every distro out there (I usually use debian for this sort of project - ie, no money, but use SLES at my day job) failed to even get to textmode console. Trying several distros, I finally put it out there and used OpenSuse and voila!, vga was working. After that, I got X running, and many hours later had the mouse working. The key to this device is Windows. I ended up parsing through the registry looking for "touch" and found that the software in use on Windows is eGalaxTouch. A quick google brought up their site where I found several Linux drivers. I used the beta mode drivers to get the mouse working. Here is a more detailed breakdown.
Use OpenSuse 11.3 (I used the full blown disc - its is the only distro I could get to boot correctly as the others all used OpenChrome, while OpenSuse seems to use fbdev - note here that installing the unichrome drivers will actually break X and cause you to have to reboot to get away from the mess on the screen). Use eGalaxyTouch drivers. The pdf's included in the download have step-by-step instructions but the big pieces are the setup.sh script and the serio_raw steps (note if you perform a 'hwinfo --bios | more' you can figure out which /dev/input/event* you're using - for me it was event1 and serio4). Note also to choose PS/2 when executing the setup.sh script provided in their download. eGalax_eMPIA Technology Inc. TouchKit Linux Driver Here is my xorg.conf now:
Section "ServerLayout"
InputDevice "EETI" "SendCoreEvents"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]....
On the video, just stay with the fbdev and you should be good. So far, I've had KDE, Gnome, TWM all running; and now have my EFL apps running! Woohoo! Next piece of the puzzle is to verify sound, but on the face of it, looks like the system recognized it off the bat. And of course one other note. 11.3 is going to make me a convert!
Does anyone here have experience with using the Debian Live Builder from HERE? Every time I attempt a build, it fails. I thought it strange that it didn't let me select 'amd64' under 'LB_ARCHITECTURE', 'testing' under 'LB_DISTRIBUTION', or multiple options under 'LB_LINUX_FLAVOURS'. Does anyone see what I might have done wrong?
# Standard options
LB_BINARY_IMAGES="iso-hybrid"
LB_DISTRIBUTION="sid"
LB_PACKAGES_LISTS="minimal"
LB_TASKS=""
LB_PACKAGES="dpkg aptitude wget wvdial ppp sudo"
[Code]...
I have bunch of partitions on my Debian server installation, so I was experimenting with partitions and saw that is one partition fails fsck on booting time, system waits for root password or CTRL+D key combination. The problem is that my Debian machine is headless and I use only SSH to it. So if fsck fails, I can't to login to SSH (off course, because it is not loaded at this time). So I need to go with monitor and keyboard to machine and press CTRL+D.One option is to disable disk checking at startup by changing fstab file. I don't like this option. Is there any possibility to auto continue booting Debian machine ?
View 2 Replies View Relatedi do have a strange problem get running php5 on lenny 64 inside apache2. i had installed it as all instructions on the web does: # apt-get install php5 libapache2-mod-php5 php5-cli php5-common php5-cgi
apt has enabled php automatically, so
/etc/apache2/mods-enabled/php5.conf does have inside:
<ifmodule mod_php5.c>
AddType application/x-httpd-php .php .phtml .php3
AddType application/x-httpd-php-source .phps
</ifmodule>
[Code]...
I am running Debian Squeeze, apt-get update runs by itself in the background, taking up 100% of one of the two processor cores.
I have kept the system updated.
Heres the output of
Code:
Code:
I have noticed this a couple of times now, i can kill the process and it doesn't show up again ( i haven't noticed it showing up till next reboot).
I don't have update manager to set to automatically install anything, I have set it to "Only notify about available updates".
I bought vps server and now I want to upload openssh public key. With this command:
ssh-copy-id username@ipaddress
the result is:
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
/usr/bin/ssh-copy-id: ERROR: ssh: connect to host xxxxxxxxx port 22: connection timed out
with this command:
cat ~/.ssh/id_rsa.pub | ssh username@ipaddress "mkdir -p ~/.ssh && cat >> ~/.ssh/authorized_keys"
the result is:
ssh: connect to host xxxxxxxxx port 22: connection timed out
also with this:
ssh username@ipaddress
the result is:
ssh: connect to host xxxxxxxxx port 22: connection timed out
I am trying to copy a CDR file from cisco CDR to my vsftpd on Debian but I am getting this error on the Cisco PBX: [URL] ....
View 3 Replies View RelatedI have now tried twice, with the same results, to install Debian 8.2.0 onto my hard drive. Each time it went through the installation as if everything was working. But, when it rebooted, it came up in grub rescue mode. When I do an "ls" command, it only shows the hard drive and no partition information. When I do an "ls (ho0,1)" it reports no such partition.
When is my installation failing? Why is it not partitioning the hard drive and loading the OS? Obviously it can write to the disk or else grub wouldn't come up at boot.
I downloaded a package from Debian's website with using wireless since I use a Macbook and currently I can only connect through wireless to get internet working. URLs....
When I try to open this with package install it gives me the following error:
Failed to install file..A unspecified transaction error has occurred. More information is available in the detailed report.
My Debian Jessie system started to bug after a separate /usr partition being full. After redimensioning and various packages reinstalls I fall on this:
systemctl --user status Failed to get D-Bus connection: Erreur inconnue -1
In the /var/log/messages log I have the following fail:Dec 13 13:24:50 mailserver kernel: ipmi_si(SI_CHECK_BMC): Failed to get Global Enables 0xc6.What does this mean?It is a HP server...Linux debian etch, kernel 2.6
View 3 Replies View RelatedI don't know why but my server is no longer successfully updating its security repositories when I run 'apt-get update' on my system.Some index files failed to download, they have been ignored, or old ones used instead.Did I mess something up? No changes have been made to the server and I ran 'apt-get clean' and that didn't really do much.
View 2 Replies View Relatedas the title above, it failed playing mkv but totem can play it just fine
Code:
[h264 @ 0x7f3be8ee5600]AVC: nal size 122945
[h264 @ 0x7f3be8ee5600]no frame!
Error while decoding frame!
[h264 @ 0x7f3be8ee5600]AVC: nal size 95745
[h264 @ 0x7f3be8ee5600]no frame!
[Code]....
Ok here's the problem : I tried to patch the kernel of my Debian server with GrSecurity but when I rebooted I couldn't SSH the server anymore, but my host has a rescue system that lets me SSH the server so I can fix things.
So maybe the kernel patching failed, maybe it's a only a problem with Grub.
I don't really know what to do to fix this. If I messed up the kernel what can I do ? Can I just fix the problem by modifying the grub entries to only boot on the old kernel (I don't even know if it's here anymore, I'm quite the n00b) ?
Well for now I'll just try to mount the partitions (won't let me do "mount: can't find /dev/sda1 in /etc/fstab or /etc/mtab" )
edit : to be clearer my main question is : how can I determine if it's because the kernel is messed up or because the system wouldn't boot properly ?
edit 2 : is there a way to create a log of what happens at boot so I can have an idea about what's wrong ?
I have installed cups(1.5.3) in my Beagleboard black based custom hardware running on Debian 7.8 using 'apt-get install' command. I am trying to print to HP deskjet 1112 usb printer from system line but nothing is getting printed and the output of 'lpstat -t' shows the error : "/usr/lib/cups/filter/hpcups failed "
The error_log output is :
I [10/Nov/2015:09:44:51 +0000] Saving job.cache...
I [10/Nov/2015:09:44:52 +0000] Listening to [v1.::1]:631 (IPv6)
I [10/Nov/2015:09:44:52 +0000] Listening to 127.0.0.1:631 (IPv4)
I [10/Nov/2015:09:44:52 +0000] Listening to /var/run/cups/cups.sock (Domain)
[code]....
Please find the response from CUPS administrators below:
As far as I see this has nothing to do with CUPS.As far as I see the first error message comes from Ghostscript: "Unable to open the initial device, quitting" (this is in Ghostscript's gs_init.ps file).Therefore Ghostscript does not produce any output which lets then the filter from HP's HPLIP driver software error out with "cupsRasterOpen failed" and finally the HP backend errors out with "ERROR: null print job".Neither Ghostscript nor HP's HPLIP driver software belong to CUPS so that the issue does not belong to CUPS (according to my analysis).
I guess that somehow the "Ghostscript command line" is not correct or does not work as it should.Usually this is alos no bug in Ghostscript but "some where else" where the Ghostscript command line with all its parameters is created.
I have a Debian 8 system here running off an SSD with a five-drive RAID5 array (md0). I can reboot this machine just fine until I do an apt-get update and upgrade, at which point it fails to boot. I get the following:
A start job is running for /media/Storage (the mount point for md0)
Afterwards it dumps me into emergency mode. journalctl shows me these worrisome lines:
Timed out waiting for device dev-md0.device.
Subject: Unit dev-md0.device has failed.
Now, I have a backup image of this installation from right before running apt-get update and upgrade. If I restore that image, Debian boots fine and mounts the array successfully every time. Until I update and upgrade again. I've seen it happen three times now.
My system from and after that at startup as it was doing a file system check I got this:
Checking file systems ... fsck 1.41.3 (12-Oct-2008)
/dev/sda1: clean, 30/124496 files 34735/248976 blocks
/dev/hda1 contains a file system with errors, check forced.
[code]...
After downloading four .bz2 source files containing the sources for kdevelop-4.2.2, I tried to follow Soul Singin' HowTo without success apart from receiving this error:
edbarx@edbarx-pc2:~/kdev$ dpkg-buildpackage -rfakeroot -us -uc
dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2
dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor):
[code]....
What should I do to enable dpkg-buildpackage build the .deb package files for me? The /home/myuserhome/kdev directory contains these directories:
kdevelop-4.2.2.orig kdevelop-php-docs-1.2.2.orig
kdevelop-php-1.2.2.orig kdevplatform-1.2.2.orig
These .orig directories were created by dh_make --createorig, as dh_make alone grumbled that it needed --createorig.
I have tried to install some applications on my Debian Testing but I've got this common error after fetching packages from internet:
dpkg: warning: 'ldconfig' not found in PATH or not executable.
dpkg: warning: 'start-stop-daemon' not found in PATH or not executable.
dpkg: error: 2 expected programs not found in PATH or not executable.
Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin.
E: Sub-process /usr/bin/dpkg returned an error code (2)