I habe installed the following operating systems:
- windows xp
- debian squeeze
I can not start windows any more. But debian still works. I would like to backup some windows-files. debian-programm which can save and burn windows-files on a cd?
I have this major problem with the latest version of Ubuntu (10.10). Since I applied this automatic update Ubuntu won't startup anymore.I am 99% sure it's something to do with the graphics drivers. I have an ATI Radeon HD5850. I can still boot up in safe mode in one of the older kernels of Ubuntu. But with the latest kernel I can't even get into safe mode.What I want to do now, is to remove all traces of any potential drivers and then reinstall them. What is the best way to do this?
View 9 Replies View RelatedThis seems to be a kind of epidemic.
We are at least 3 people on the French Ubuntu forum with the same issue which has just appeared...today.
We start our laptops and they don't boot, we have just the message:
"* Stopping System V runlevel compatiblity [OK]" ...and a blinking cursor.
I have a hp pc that has a hard drive of 750 gb and a recovery hard drive of 31gb. I installed linux side by side with windows 7 for dual booting. Now I can't boot windows 7 anymore. During the installation of linux, I chose the advanced option so as to manually partition the drives for linux. On the available list of drives, I chose the 750gb and clicked on modify. I chose 150gb for the root "/" (on ext4) and 700mb for swap out of the 750gb and clicked install. After finishing the installation I restarted the pc and sought to test linux. The linux works fine but when i tried to start windows, I have a boot error. My pc doesn't seem to recognize windows anymore. It takes me straight to the HP recovery tool. I don't understand why. So I logged into ubuntu and check the disk utility and I discovered that I have a whooping 600gb unallocated space. It's like my whole windows is gone. This is what Disk Utilty shows
150gb ext4 | Free 600gb | RECOVERY 31GB NTFS | HP_TOOLS 108MB FAT
What can I do to recover my windows back?
I just installed CrunchBang Linux and it's great! But I can't boot into windows anymore. I'm sure it didn't delete my Windows partition-it's mounted. My linux partition is /dev/sda1 Windows is /dev/sda2
Code:
sudo update-grub
Found linux image: ....
Found initrd image: ....
Found linux image: ....
Found initrd image: ....
done
how I can get Windows to reappear? I've had bad luck with Grub in the past and I don't want to fight it on my own...
since about a week I got a serious Problem on my Multimedia Homeserver. It firstly happened after doing normal updates with 'zypper dup'. Starting the Machine xdm starts up normally, but after logging in KDE (4.6.0, OpenSUSE 11.4 64Bit) shows its progress bar and finally ends up hanging at about 80% completion. Repos are the original distro repos (except nvidia, packman and VLC Repos) for stability reasons - this means no KDE-factory or Tumbleweed repo is activated here. Icewm starts fine so I can use Xine but I'd like to get KDE back running again for using amarok and others.Here is what I tried so far:
tried another user - same result
tried root-user - same result
renamed ~/.kde4 - same result
[code]....
I have been using F13 Gnome desktop for a few mouths now but for some reason it won't start X anymore. I get this:
[Code]....
giving up. xinit: No such file or directory (errno 2): unable to connect to X server xinit: No such process (errno 3): Server error. Don't knoiw what has changed? But I would like to get it fixed. I have installed F13 on another partition and it works OK.
I tried to install Ubuntu on a USB HDD on my Macbok Pro 5.3. Everything seemed to be fine, but while rebooting the computer, OSX doesn't start anymore. So, I would say I erased the boot sector of the internal HDD or something similar but I'm not an expert. My internal HDD seems to be fine: One 200 MB FAT32 partiton partition labeled EFI and with the boot flag, One HFS+ partition for the system. I tried to boot with the Snow Leopard DVD and run the Disk Utility to make a "repair". The repair was fine, but the Mac still doesn't boot anymore. (Forget Ubuntu, it's only OSX related, I'll try again Ubuntu only when I'll be able to boot OSX again).
View 9 Replies View RelatedThunderbird won't start in Lucid 10.04 It used to work, but stopped working (an update perhaps) Running from the menu just gives a tiny window, which when expanded is blank Running thunderbird from the from the command line crashes as follows:
Code:
peter@trinity:~$ /usr/lib/thunderbird-3.0.5/thunderbird-bin
/usr/lib/thunderbird-3.0.5/thunderbird-bin: error while loading shared libraries: libmozjs.so: cannot open shared object file: No such file or directory
Looking for the missing library:
[Code]...
After upgrading my husband's laptop to 11.04, KDE does not start automatically anymore. kdm (the log-in screen) appears. I select "KDE Plasma Desktop". But instead a kind of terminal appears in the top left corner. This console does not have window decoration. When I type startkde into it, KDE starts completely normally.
The same happens with a newly created user, so a misconfiguration in .kde cannot be the cause.
/usr/share/xsessions/kde-plasma.desktop is correct:
Code:
The metapackage kubuntu-desktop is installed.
I have tried reconfiguring and reinstalling various packages that I or others thought might be responsible:
Code:
GNOME was installed on the same computer, too, and caused some problems after the upgrade (instead of KDE being the default session, it was Unity, but no menus or control bars loaded). After trying all the things mentioned above, I uninstalled all GNOME/Unity-related packages to rule out they were causing the problem (according to that list: [url]). It did not help, even though for two packages messages appeared that sounded like they might make a difference:
Code:
I compared with
Code:
With my other two computers that work fine after the upgrade to 11.04, they also use startkde and kwin.
I can't start U1 anymore neither from System nor from myname menu.I don't see anymore the U1 checkbox neither in my directories nor when I right click.I use nighlies repository and I suspect that everything happend after the last update (three o four days ago).I tried to reinstall from synaptics but no way.Macicada does not start as well.
View 1 Replies View RelatedJust did a fresh install of 10.04, everything working great, and I was pretty excited about the integration with gwibber, evolution, and empathy. I was fiddling around, getting things the way I wanted them (startup programs and such), and upon a test restart, noticed that unlike the first couple of times I had restarted with 10.04, the Evolution icon no longer came up in the tray, and my "Me" menu was useless - didn't have me signed in to Gwibber or Empathy, didn't give the option to do so.
Yes, I can still run these programs no problem, and I could probably get it such that they ran at the start... but what I would like is for them to run minimized, in the tray, like they did the first time I booted up 10.04. Again, I trust this is a mere couple of lines in the command prompt, I just don't know what they are.
while I was using a live cd, I accidentally deleted some files on the hard drive, including apparently the init file. The fact is that linux doesn't start anymore (kernel panic).
View 14 Replies View RelatedI just upgraded to Debian 6.0 squeeze 32 bit XFCE from Ubuntu on my old Dell PC. Installation went well, however, i can't get into X windows after reboot, the screen just displays garbage
Specs:
Dell dimension 600Mhz/384M RAM/10G HDD
ATI RAGE pro 128
Any pointers on what should I do?
Accidentally, I deleted Windows root files. I do not know why, but I cannot recover them. The point is that I had installed two versions of Windows XP Pro SP2, so from grub I had other step before starting one Window versions. But now grub does not detect windows, and if it could, I would not be able to start it because of the lack of the files at root.
The result of bootinfo gives:
Code:
I do not know what happened to sdb5. Is it a way to avoid reinstalling windows?
For many years, I was happily running VMware virtual windows machine (XP, now Win7) on my linux host. Using the VMware unity mode I had the perfect, seamless integration of windows applications on my favourite linux desktop. However, VMware has dropped unity support for Linux hosts in their latest release 12. So I need a new method to get my seamless integration.
I have set up some launchers for the most commonly used windows applications to run them as RemoteApp via xfreerdp directly from my dock. That seems to work OK. Now sometimes I have to access some other program or maybe the control panels or something like that. For this purpose it would be very useful to be able to launch the (or any 3rd party) "start menu" as remote up and from there launch whatever is needed. So far I did not find anything that looked like a StartMenu.exe I could use
How I could access the start menu via RemoteApp.
VMware Unity was way cool. I tried Seamless Mode in VBox, but that doesn't cut it for me ....
ubuntu 11.04, sony vaio laptop
I was messing around with trying to install themes and I must have knocked something important in compiz settings as now I am unable to move my windows around on my desktop.
Now whenever I open an application, however it opens I can't move it.
how I can enable window movement again?
My primary OS (Windows 7) which I had installed before ubuntu is not in the Grub Menu and I can't figure out how to boot it up. (It's not in menu.lst either)
I just installed ubuntu, I partitioned it by shrinking my window 7 partition (in windows) and formatted the free space for ubuntu. I can see the windows file system and access the files (143 GB Filesystem in Places) but I can't boot to it
I have dual boot Windows XP pro SP3 / Ubuntu 9.04 and I only use the Windows to download torrents because the download speed on Ubuntu is terrible...
But by accident I pressed the power button when I was downloading in Windows and since then Windows won't boot anymore. Is this a Windows problem or is it maybe that it srewed up my grub? Because I can still select Windows in the grub menu but it stops at "Starting up".
I need to use bluetooth, but for some yet unknown reason I don't seem to be able to switch on the bluetooth-card (it should be as simple as to press the Fn+F6 buttons on the keyboard to switch it on though and then the bluetooth indicator should light up, which is not happening, but I don't know if this is because of (X)ubuntu) and Ubuntu says it can't find the bluetooth card. That's not what I wanted to discuss now, but I think some history is always welcome when trying to do fault-finding I thought I maybe might be able to do it from Win7 . So after months of not having booted Win7 I thought to give it a try, but I get stuck right after the grub boot-screen. All I get is a blinking cursor for minutes and there's no HD activity. Then I booted Xubuntu again and it needed to do some check, which I passed and Xubuntu started as normal. This check was done by "Keys". I don't really know what this Keys is, but since a couple of days I always get this word below the word Xubuntu in the boot-splash-screen. This is only after I installed WinFF or DVD::RIP. There was some error during install telling me that it needed something with 'keys', so I entered the command quoted, something was installed and then the rest of the installation went okay. I've been looking in the bash_history files (user and root) but I can't find the command which I entered to install this keys-thing anymore, which is of course strange on itself.
Now I've got the idea (I'm not sure though) that I can't boot Windows because of this keys thing, but I have no clue how to get rid of it. Or could there be other problems causing Windows not to boot?
I really hope someone can help me getting back in Windows again, because losing the Windows partition really is not fun, even though I hardly use it. I can enter the Windows partition from Linux with a file manager though, so it's not vanished. Just wish to be able to boot Win7 when I need it.
I'm using a dual boot system with Fedora and Windows XP. Until a few days ago i could boot in Windows or Linux choosing the option during boot. I have updated Fedora with common updates these days and now i can't boot in Windows anymore, because there are no entry for it anymore to the boot menu.
The graphical boot configuration tool (i'm using Gnome) only lists three different kernel for Fedora but any entry for a Windows partition. Here is how my disk appears:
I'd like to know why this occur and, mostly, which is the most easy way to restore the dual boot
I can't access my files on windows from ubuntu anymore. I was able to do that some time ago, I'm not sure what changed. I can see the shared folders, but when I try to open them, and authentication window appears, asking for the login, password and work group. It doesn't get passed that even though I enter the correct information.
View 5 Replies View RelatedI have Linux Mint and Windows 7 installed on my laptop, and recently tried tinkering with EasyBCD, to use the Windows multi-boot loader instead of grub. Well, that didn't work out too well, because I ended up with the Windows boot loader with two options, Windows 7 and Linux Mint, however the Linux Mint entry just redirected me to grub, which wasn't what I intended.
I tried to put things the way they were, with grub as the only boot loader, and figured I'd do so by setting EasyBCD to skip the multi boot screen and going straight to the Linux Mint entry, which corresponds to grub.Well, now when I boot, I get the grub screen, but if I select the Windows 7 entry, it just redirects me back to grub, so I can't access Windows 7 right now. What can I do to fix this? Can I edit the Windows boot loader from within Linux?
I installed 11.2 a couple weeks ago on a machine at work, and thru YaST connected to the domain. I was then able to add a printer, and thru nautilis browse to windows computers with shares. Something changed about a week ago and I've played with everything I can think of, read lots of tutorials, and still can't make it work. I'm about ready to format and reinstall from scratch and try again, as I'm out of ideas.
So the way it was before, in nautilus if I clicked on network it would give me a list of all sorts of computers on my domain, and if I clicked on one of the windows machines it would ask me my username/password, and after I entered them, I'd be in.
Now, in nautlis if I click on network it shows me "windows network" and if I click on that it gives me a list of all sorts of workgroups and domains (or something like that). If I click on the one with my domain name, it asks username/password but it doesnt work.
I've tried leaving the domain and rejoining, I've enabled and disabled kerberos, ldap, samba, everything I can think of - although I dont think I had to change those at all from default the first time.
I dont know what I could have done between when it worked and now. I did allow some installation of updates. Shortly thereafter I noticed ssh no longer worked, and after playing with it forever I couldnt make it work, I uninstalled openssh and then reinstalled it from the repository, and it worked again. No idea why it stopped working, but maybe it's related to this domain problem, I dunno.
My main goal at this time is to be able to access windows shares from the linux machine. I don't care if I have to login to linux with my windows domain account or a local account (although all the documentation I've followed said that I should be able to login with a domain username/password too).
I have Ubuntu 10.10 installed on one (physical) hd and on the other one Windows. On both drives grub is installed to boot both operating systems. When I wanted to install SP1 for Win 7 I had to add a bootable flag to the partition from which Windows boots, otherwise the installation of SP1 does not work. I did so by booting into Ubuntu and using gparted to add this flag. After doing so the update for SP1 worked without any problems.
When trying to boot back into Ubuntu grub complained that it couldn't find the kernel anymore! I tried to boot into a Ubuntu minimal cd and to restore grub using chroot, update-grub and grub-install which didn't work. I still had the problem that it was Unable to boot Ubuntu putting me in some minimal system called initramfs. It seems however that the uuid of the partitions changed. I guess this happened when I added the bootflag to the windows disk.
Next thing I tried was to tell grub not to use the uuid for loading the kernel by uncommenting something in /etc/default/grub. Then I got the kernel booting but it suddenly stops (I guess when it is trying to mount the root file system) saying that the concerning uuid does not exist putting me into initramfs again. The strange thing is that there I coulnd't even manage to mount the root partition using /dev/sdb1 (on which it is in my case). Any way to restore the system again without having to reinstall it.
My dual boot Windows 7 and Opensuse 11.3 doesnt work anymore, i have to keep repairing the OS i want to use, i fix one and that breaks the other, how can i fix this so both work
View 7 Replies View RelatedI cannot get Ff to load anymore. It had been working perfectly. Nothing happens from icon click.When I try to load from terminal I get the following error message.
(process:1767): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed
Could not create gnome accelerators directory `/home/bren/.gnome2/accels': Permission denied
After upgrading Squeeze, Gvim and Vim seems to be broken. So I went back to 7.2 by compiling from source. However I am failing to compile the gui version under Debian. I tried the configure options, apt-get build-dep vim etc but nothing seems to work. Does anyone know a straight way to make it work? Or even a way to find the previous version of vim gtk?
View 1 Replies View RelatedI can't boot into my debian anymore, and I have no idea what is causing this Here is the output of dmesg in the attachement.
View 14 Replies View Relatedsorry, I don´t know abt systemsoftware at all. My neighbour that installed the pc here,
has moved away abt a year ago. I cannot login in ebay anymore. I can get the lists, but as I need to login, for buying of checking my messages, it starts connecting, but than ´hangs´ and does not come any further. I found a tip, to upgrade the browser, but HOW ?
I mostly use iceweasel, but chrome and conquerer do the same