Debian :: Want To Set Modules To Boot?

Feb 5, 2011

To start off with, I'll put the information as best I can that I think would help everyone figure out what it is that I want to do:My Laptop is a Dell Inspiron 1545I have a Broadcom BCM4312 802.11b/g (rev. 01) Wifi Driver (according to lspci)Take care, I already have it working!I installed the driver for it (as best I could) from I am running Debian 5.08 Lenny amd64My wireless internet works via the instructions from My question is how I can set it up so that every time I boot, I don't have to run:modprobe ieee80211_crypt_tkipinsmod wl.koIn the terminal (after using su and then going to the folder that contains the wl.ko file).

I've been trying to find this on the internet, but it seems that I have been unlucky in that department. This is the first time in about 6 years I've used linux (back in high school I tinkered with Slackware, Gentoo, and Vector, recently tried openSUSE but I've always been curious to try out Debian).

View 3 Replies


ADVERTISEMENT

Debian Configuration :: Loading Modules At Boot?

Aug 29, 2010

I have to load the ip_conntrack modules every time I reboot. How do I get the iptables modules to load automatically at boot. It seems they are supposed to auto load when they are needed but they are not doing that. I have to do modprobe on them. also does anyone know where I can download all the modules available for iptables? I looked on the netfiler site and did not learn much.

View 1 Replies View Related

Debian :: Determine And Remove Modules Load At Kernel Boot?

Jul 17, 2009

I was wondering how can I determine among the modules loaded at boot which of them are really necessary and which are not, in order to reduce the boot process time and have a more "elegant" system start.

I know this theme is a little bit of complicated because it depends of the user's point of view and demand a high knowledge of which things are happening in your system but I need somewhere to start improving the performance of my debian system.

View 3 Replies View Related

Ubuntu Installation :: Boot Error "modprobe: FATAL Could Not Load /lib/modules 2.6.35-22 Generic Modules No Such File Or Directory"

Apr 14, 2011

Tonight I installed ubuntu 10.10 (32 bit) on an external usb harddrive with a dvd I burned and I used my older desktop. I disconnected all internal and external drives first so everything had to be put on the usb drive I selected (only option available). I used the option to load extra software, use the entire hard drive, and let the software do it's thing. I basically had no options where to put things and it didn't have much choice.

When I boot the usb drive on my laptop (win 7 64 bit) by telling the bios to boot to it first... I get an error: modprobe: FATAL Could not load /lib/modules 2.6.35-22 generic modules No such file or directory. This message appears twice and then it does boot into ubuntu and seems to work fine. I'm new to this OS so that is an uneducated guess but the things I have done seem to be working. So exactly what is this error referring too? Is there a way to fix the problem or do I just ignore it.

View 9 Replies View Related

General :: FATAL: Could Not Load /lib/modules/2.6.18-194.17.1.el5.028stab070.7PAE/modules.dep: No Such File Or Directory

Mar 6, 2011

I want set up VPN on my VPS but when i try to turn on tun/tap i see:

:/lib/modules# modprobe tun
FATAL: Could not load /lib/modules/2.6.18-194.17.1.el5.028stab070.7PAE/modules.dep: No such file or directory
os : debian 5
(folder lib/modules is empty)

View 1 Replies View Related

General :: Rc.modules Not Loading Modules At Startup?

May 11, 2010

I've been trying to load my pcmcia network card driver "xirc2ps_cs" at startup with no success. I have added "modprobe xirc2ps_cs" to the rc.modules file but it doesn't load at startup. Curiously, though, if I execute rc.modules AFTER the machine has booted it will load the modules just fine. Just not during the boot up process. Thinking that hotstart might have been causing problems I've disabled hotstart (chmod -x) temporarilly to remove it from the picture, but there was no change.

View 5 Replies View Related

Fedora :: Load Kernel Modules At Boot ?

Jul 4, 2009

How do I get modules in the Kernel to load automatically at boottime? I''m specifically trying to get i810fb to load during the boot process. In Ubuntu, I just had to edit a file and update my initramfs. How do I do this in Fedora?

View 5 Replies View Related

Fedora Installation :: New Kernel Will Not Boot (Modules)

Mar 26, 2011

The new kernel upgrade on Fedora 14 will not boot. lib/modules do not exist is the message. Grub was adjusted to match the old kernel, and the new kernel when booting says lib/modules do not exist. The old kernel has twice as many modules as the new kernel in lib/modules. How do I get the new modules to install so I can boot with the new kernel then? Should I reinstall the new kernel?

View 2 Replies View Related

Ubuntu :: Blacklisted Modules Still Get Loaded At Boot?

Oct 23, 2010

I'm trying to prevent a few modules from loading at boot, like i.e. bluetooth, sco, bnep, btusb, usb_storage and uvcvideo, so I blacklisted them in /etc/modprobe.d/blacklist.conf but they still get loaded. I've checked that I unload all of the ones depending on eachother so that shouldn't be the problem, I think. Does anyone know what I'm supposed to do to really prevent them from loading?

View 2 Replies View Related

Slackware :: Modules Being Loaded At Boot Time?

Jun 1, 2011

I just installed slack 13.37. I was poking around a little and I noticed that I have all these modules loaded... yet when I open up /etc/rc.d/rc.modules almost everything is commented out. how are these modules being loaded at boot time?

View 4 Replies View Related

Ubuntu Networking :: Modules Not Loading At Boot-time?

Sep 1, 2011

I've recently been having a lot of trouble trying to install a ralink 3062 driver on my ubuntu 11.04 desktop. There are quite a few excellent tutorials on this website. [URL]... In my case, however, adding the conflicting drivers to /etc/modprobe.d/blacklist.conf didn't prevent them being loaded at boot-time, so I could not make the change permanent. I eventually found a workaround online which I thought I'd share here. Once you have updated your blacklist and module list, use Quote:

sudo update-initramfs -u

I'm a beginner so I'm not sure, but I think the problem is that initramfs loads the conflicting modules into memory before the system comes to reading the blacklist and module files. Once you've done this, restart your system and you shouldn't have any further problems. P.s. As far as I know this only works (but should only be a problem for kernel 2.6 and later)

View 2 Replies View Related

Debian :: How To Remove NFS Modules

May 13, 2015

NFS means Network File System, right? If so, it is not needed for most users. I donot understand why those modules are started automatically in Jessie. How can i safely remove those module(s) ?

View 2 Replies View Related

Ubuntu :: Gave Up Waiting For Boot Device - Missing Modules

Jun 7, 2010

The case is that I've got 2 harddisks. On the one windows xp(slave) - and on the other one ubuntu (master). During the boot I get these errors...
"Gave up waiting for boot device"
"Boot args(cat /proc/cmdline)"
"Missing modules (cat /proc/modules; 1s , dev)"
"/dev/disk/by-uuid/f96603ce - does not exist"

These problems occured because of this:
After using ubuntu I tried to reset my bios, because else it couldn't have found the disk with xp. And I didn't disconnect the disk with xp while resetting the bios. And now the system can't find the disk with xp any more when booting. Is there a way to finding the disk..? And I'm in doubt about IF I've resetted the bios at all. I miss a manual for PCCHIPS M851. May be it can take 20 minutes for the bios to be resetted? The shop where I bought the motherboard doesn't exist any more... and don't know the manufacturer. Could I damage the motherboard if I tried rebooting lots of times to get it work?

View 5 Replies View Related

Debian :: Check For Loaded Modules?

Sep 25, 2010

Howto check from the command line which modules were loaded after Lenny restart?

View 2 Replies View Related

Ubuntu :: New User Crash Boot Up - Missing Modules (cat/proc/madules;is/dev)

Jan 5, 2011

new user and have had a crash boot up and get the following: missing modules (cat/proc/madules;is/dev) Alert! /dev/disk/by-uuid/13bf007d-3bab-48et-b91a-babe68ab3223 does not exist

View 9 Replies View Related

Debian :: Install P4-clockmod And Other Cpufreq Modules?

Jul 30, 2011

I have a Xserve server with Debian 2.6.26-2-amd64, the cpu is 2 X Intel Xeon 5150 @ 2.66GHz.I want to scaling down the cpu frequency and I only found three modules in my system and all of them are not working:

lake:/# ls /lib/modules/2.6.26-2-amd64/kernel/arch/x86/kernel/cpu/cpufreq
acpi-cpufreq.ko powernow-k8.ko speedstep-centrino.ko
lake:/# modprobe acpi-cpufreq

[code]....

View 3 Replies View Related

Debian :: How To Install P4-clockmod And Other Cpufreq Modules

Jul 30, 2011

I have a Xserve server with Debian 2.6.26-2-amd64, the cpu is 2 X Intel Xeon 5150 @ 2.66GHz.I want to scaling down the cpu frequency and I only found three modules in my system and all of them are not working.I found only module P4-clockmod can work with Xeon processors, but I don't know how to install it into the system.

View 2 Replies View Related

Debian Configuration :: Debbootstrap Not Retrive Modules?

May 7, 2011

I have installed an images using debbootstrap command. The problem is there is no module in /lib/modules.For example I have installed lm-sensors but when I run sensors-detect, in the middle of detection I get these:FATAL: Could not load /lib/modules/2.6.32-24-server/modules.dep: No such file or directoryFailed to load module i2c-piix4

View 6 Replies View Related

Debian :: Install Perl Modules Using CPAN?

Mar 5, 2010

Can anyone provide me information about installing perl modules using CPAN.....

View 1 Replies View Related

Slackware :: Slack Kernel With Debian With No Modules

Jun 10, 2011

i want to do is dual boot windows, Slackware, and Debian. I don't care if i use lilo or grub, they are both equally familiar to me, just above nort. i have made attempts at editing the lilo.conf file, which said it had warnings but i didn't know how to view the warnings. It made it so i could select it, but when i did it booted the slack kernel with debian with no modules. get slack, debian and windows all running on my machine the way they're intended?

View 5 Replies View Related

Debian :: How To Reset Kernel Modules Load To Default

Aug 21, 2010

trying to install the wi-fi drivers for RaLink rt3090. How can I reset the kernel modules to default so I can try again?

View 3 Replies View Related

Debian Configuration :: Kernel Modules Won't Load Anymore

Jul 7, 2015

After a hiatus I found my machine to be down, but upon turning it on I get significant errors and dropped into emergency mode (see below). This machine wasn't very up-to-date to begin with, so I'm having difficulty determining the order in which to proceed. A couple naive checks and updates on my part are not working. The file system appears to be intact enough to "cd" around and "ls" to see that my files are all (seemingly) there. But the kernel modules aren't loading which is, you know, a problem.

The state I find it in is that it will begin booting to Linux 3.2 (which I know is no longer supported in testing, see below where I tried to update to 3.16), but fails quickly and puts me into emergency mode

Loading, please wait...
megasas: INIT adapter done
systemd[1]: Failed to insert module 'autofs4'
systemd[1]: Failed to open /dev/autofs: No such file or directory
systemd[1]: Failed to initialize automounter: No such file or directory
systemd[1]: Failed to set up automount Arbitrary Executable File Formats File System Automount Point.

...Then several drives show up as clean....

Running "journalctl -xb" shows that it can't mount the module even though it's there on the disk:
... systemd-modules-load[259]: could not open moddep file '/lib/modules/3.2.0-4-amd64/modules.dep.bin'
... systemd-modules-load[259]: Failed to lookup alias 'firewire-sbp2': Function not implemented
... systemd-modules-load[259]: could not open modeep file '/lib/modules/3.2.0-4-amd64/modules.dep.bin'
... systemd-modules-load[259]: Failed to lookup alias 'loop': Function not implemented

And yet, if I 'ls' that modules.dep.bin file, it's right where it's supposed to be, for the appropriate architecture and everything.

After that (in the journalctl output), it shows several things start up, but systemd-modules-load.service fails:
.. systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
.. systemd[1]: systemd-modules-load.service: Failed to start Load Kernel Modules

...and lots of things fail from systemd-udevd: failed to execute '/lib/udev/socket:@/org/freedesktop/hal/udev_ev_event': No such file directory.

"uname -a" shows
Linux <my hostname> 3.2.0-4-amd64 #1 SMP Debian 3.2.32-1 x86_64 GNU/Linux

I tried updating via apt to the Linux 3.16.0 kernel, but grub wasn't finding it in a way that effects the boot process, and no appropriate "vmlinuz-" file appears with the others on the boot partition. So, I tried switching to grub2 but the update-grub command produces many errors.... For now, grub2 still (attempts to) load the old kernel (3.2) with the same results as I was getting with the old grub-legacy.

Regarding the module-loading features, running "lsmod" shows about 30 lines:

Module
ext3
mbcache
jbd
dm_mod
usbhid
hid

[Code] ....

...I'm at the limit of what I know to check and/or try.

View 1 Replies View Related

Debian Configuration :: No Rule To Make Target Modules

Sep 17, 2015

i'm trying to install driver for some PCI device but i have problems with it - when i run it it gives me an error

Code: Select allmake: Entering directory `/lib/modules/2.6.32-5-686/build'
make: *** No rule to make target `modules'.  Stop.
make: Leaving directory `/lib/modules/2.6.32-5-686/build'

i've tried to find solution in internets but have no success usually they say that problem is that ppl forget to download kernel-headers and kernel-sources or unpack kernel-sources or make symlink usr/src/linux but i've done it all and the result is the same.i think the root of problem is that `/lib/modules/ 2.6.32-5-686/build' folder is empty but there have to be this RULE, so what i have to do to have it there? my system is Debian 6.0.10 Squeeze, Kernel 2.6.32-5-686.

View 2 Replies View Related

Debian Configuration :: Can't Build Modules With 2.6.38-2-amd64 Packages

Apr 14, 2011

My new laptop works out of the box except for the video and the ethernet. For this, I have to use a later kernel than the Debian kernel (debian squeeze is currently 2.6.32). Upgrading to the new kernel (without moving to the testing dist itself) was pretty easy. I just installed linux-image-2.6.38-2-amd64 and linux-base from the testing distribution by manually downloading and using dpkg. After that, ethernet and video started working.

However, my virtualbox installation no longer works because the drivers do not match the kernel. I am used to this; whenever debian upgrades the kernel on me, I have to run "/etc/init.d/vboxdrv setup". This rebuilds the drivers. This failed for me, however, because it could not find the headers. So, I installed some more packages:

linux-kbuild-2.6.38
linux-headers-2.6.38-2-common
linux-headers-2.6.38-2-amd64

Now, when I rebuild it, I get this:

# /etc/init.d/vboxdrv setup
Stopping VirtualBox kernel modules:.
Uninstalling old VirtualBox DKMS kernel modules:.

[code]....

View 14 Replies View Related

Debian Hardware :: No Common Cd-rom Drive Was Detected Cd-rom Modules?

Feb 19, 2010

I am a frequent user of debian I think I'll be a lot here start immediately with a problem, and I hope that someone has already happened and found a solution. In practice I have to install a IBM x3250 m3 and the cd installer debian lenny 5.0.3 or 5.0.4 do not want it to find the CD-ROM drive, a module to mount the drive after the bootstrap the exact error on the screen comes up after selecting the language and keyboard: no common cd-rom drive was detected cd-rom modules

View 1 Replies View Related

Debian :: Display The Modules Related To Wifi Card?

Oct 29, 2010

how to display the modules related to my wifi card, using lsmod all the kernel modules are displayed but I would like to display just the related to my wifi, is there a way to do this?

View 2 Replies View Related

Server :: Debian 5.0.6 Iptables Modules Installation - VMware

Mar 2, 2011

I use Debian 5.0.6 32-bit through VMware workstation installed on my Windows Server 2003. I just simply installed it from CD-1 and I use Directadmin on that.

I need a lot of iptables commands for blocking but I keep getting missing module errors on that one, I did lsmod | grep -i iptables to see there are no modules. It should have been installed by the disc image but I don't know why it didn't. So I now want to know how to get those modules required by iptables.

View 3 Replies View Related

Debian Installation :: Failed To Load Kernel Modules On Startup

Sep 15, 2015

I have this kind of error:

Code: Select allr@prime:~$ systemctl status systemd-modules-load.service
● systemd-modules-load.service - Load Kernel Modules
   Loaded: loaded (/lib/systemd/system/systemd-modules-load.service; static)
   Active: failed (Result: exit-code) since Чтв 2015-08-20 08:07:38 EEST; 13min ago
     Docs: man:systemd-modules-load.service(8)
           man:modules-load.d(5)
  Process: 150 ExecStart=/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)

[Code] .....

View 0 Replies View Related

Debian Configuration :: Modules Get Mismatched With The Running Kernel Version?

Sep 30, 2010

is there a common reason why modules get mismatched with the running kernel version?why do I always get that uneasy feeling like I'm headed in the wrong direction?

View 4 Replies View Related

Debian Hardware :: Kernel Modules - Four Drivers Loaded For Video Card

Mar 10, 2011

0 down vote favorite
share [fb] share [tw]
This is the problem I run lspci -v which checks all drivers on my system and more. It says kernel driver in use is nouveau. Then under that it says kernel modules: nvidia recent, nvidia-96, nouveau, nvidiafb. So what it looks like I have 3-4 drivers for my video card loaded and one, nouveau, being used. I think they conflict with each other.

I'm trying to add drivers other then nouveau, because the mouse freezes with it. At this point I can't seem to get rid of nouveau, I go to terminal and type:
sudo apt-get --purge remove xserver-xorg-video-nouveau
And it says that it's not loaded so I can't dump it. lspci-v says nouveau is the driver being used and trying to dump it. It says it isn't installed. I'm confused. I want to dump nouveau, what should I do? I also go into Synaptic package manager and it isn't listed as being installed.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved