I have a strange problem on my system. When I turn off printer, system hang. Gdm/X exit and I can see a terminal screen with a lot of info (but I can not capture it, except taking a photo). I must press reset button. It's not all times, but at least 50% I shutdown printer. I was looking logs and I can not see any relevant. Maybe this (copy some sections of /var/log/messages, remove other not revelant):
Jul 7 19:43:34 dcr64 kernel: [341172.052076] usb 1-8: new high speed USB device number 7 using ehci_hcd
Jul 7 19:43:34 dcr64 kernel: [341172.185255] usb 1-8: New USB device found, idVendor=03f0, idProduct=4412
Jul 7 19:43:34 dcr64 kernel: [341172.185260] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[Code]...
Sometimes I turn on printer to get a photocopy and turn off later, and system hand, so, it's not necesary to print or scan to get this error.
If I shutdown from X the system hangs and I have to yank out the power cord. Same on logout.
ctrl+alt+f1 hangs for a few minutes and then starts a terminal; which does not respond to the keyboard.
There are no tty.conf files in /etc/init .
But inittab looks normal to me and includes tty (1-6)
Executing init 6 from a terminal in X will reboot the system
I was thinking this might be a dbus issue, but I am not sure. I also understand some recent issues exist with SysRq sequences. May be a video card issue,,,
Other than normal package upgrades the only changes were a recent change from a VGA to HDMI cable. I can't see why that would matter
Linux Lugh 3.2.0-4-amd64 #1 SMP Debian 3.2.68-1+deb7u2 x86_64 GNU/Linux
i reached step six where it states "6. When the root and swap partitions are formatted the base installation will begin. Note that your system may appear to hang at different points during the install but it hasn't. Just be patient." I have been staring at a blank blue screen with this blinking cursor at the bottom for 30 minutes and i was just wondering how much more "patient" will it take. for some system details. the system is clean / fist time run and anything installed on it.
My system is hanging on screen suspension... And its not the usual hang on "sleep" or others similars, it will happen by only having the screen on stand-by ( eg xset +dpms)...
If I leave for a while the screen will shutdown as expected but computer will completely hang after an indefinite time, it will not respond to outside connections and the will be spinning faster than usual...
Only workaround is to have the screen power save option disabled, in my case, on the KDE settings...
I have tried the most common solution to have "nomodeset" as a kernel option to disable mode setting, but this doesn't seem to work...
Also tried to forcebly reproduce the issue with Code: Select allxset force dpms standby/suspend/off but nothing happens like that...
This issue also only appears with the fglrx driver, open-source works well.
My system currently freeze entire UI more frequently when opening more than 1 tab in chromium. not relate to any specific web page but especially on [URL] ....
Code: Select all uname -a Linux GlobeTravelers 4.3.0-1-amd64 #1 SMP Debian 4.3.5-1 (2016-02-06) x86_64 GNU/Linux
chromuim Version 49.0.2623.75 built on Debian stretch/sid, running on Debian stretch/sid (64-bit)
I google and found lot of chromium freeze UI bug reports on Ubuntu, Fedora, Osx ...
Just picked up a Microsoft Designer Bluetooth Mouse.Whenever I try to pair it, my system hangs and I have to hard power it down. The mouse is Bluetooth 4.0, but my Bluetooth connectivity is provided by my Intel Wireless 3160 card which does support Bluetooth 4.0.I'm using Blueman as a front end, and one other thing of note is that it shows as "Unknown" after a scan.If I need to return it, I need to return it, but it seems like a good mouse and I'd like to keep it if I can make it work.
I've took this out of syslog: Code: Select allAug 1 14:58:04 Noah-LEMUR kernel: [ 317.772054] BUG: unable to handle kernel NULL pointer dereference at 0000000000000398 Aug 1 14:58:04 Noah-LEMUR kernel: [ 317.772090] IP: [<ffffffff81569f7e>] mutex_lock+0xe/0x30 Aug 1 14:58:04 Noah-LEMUR kernel: [ 317.772113] PGD 0 Aug 1 14:58:04 Noah-LEMUR kernel: [ 317.772123] Oops: 0002 [#1] SMP
I've bought a HP Photosmart printer, HP Photosmart wireless e-All-in-One printer - B110a and i've got a problem installing it properly. I'm using Debian 6.0 Squeeze. When i connect the printer, Debian doesn't recognize my printer as the Photosmart B109 printer for unknown reason. When i go to the site of HP and search for a driver, it directs me to this site:I've downloaded that latest hplip file as a .run file and installed it. My printer is recognized proparly, but when i try to print a colored image, it comes out black/white. Something is not crrect. Does anyone recognize this problem with this type HP printer?
I recently had an OS system crash..WIndows XP. Purchased a new hard drive and installed Ubuntu 10.04. Everything installed as expected, however my CPU fan seems to be louder than usual. I did clean the fan and heat sink, but still running very loudly or fast I guess you could say. Also sometimes the PC shuts down when I try to open FireFox. Any ideas on what could be happening. This is an older machine using an Intel Celeron processor. Not sure of the speed, but I could look at the bios if that is needed.
I installed the Gnome desktop CD1 AMD 64 version of Debian Squeeze. I installed samba and python-smbc. I am missing samba printers in my system-config-printer. Anyone know why? [url]
I just installed HPLIP using Synaptic package manager. One of the configure parameters (shown by 'hp-check -r') is
Code:
Am I correct in assuming that this means that a network printer will not work? Is there a way to override this while still using synaptic package manager? Would I then be able to use a network printer?
I have my eye on the HP photosmart plus B209A - and it looks like HPLIP supports it (there is a ppd file for it).
reason my Debian 5 system will not stop printing blank pages. I've got the CUPS system installed, and I've gone to the control page and canceled everything. I've also turned the printer off and restarted it several times. Every time it comes back online it starts printing blank pages again. My paper does not need to be heat treated. It's fine as it is. So, how to I stop this waste of electricity and printer MTBF? What else might be sending commands to the printer besides the CUPS system?
I have a problem with a bad entry in my system-config-printer on my notebook computer which I think is interfering with my ability to print. I run fedora 10 on several systems in my house. On one desktop, I have a printer hosted which I think I have successfully setup for wireless network sharing (an HP895) using IPP.My problem seems to be a bad entry in my system-config-printer on my notebook computer which seems to stall when I try to print from applications (Firefox for example.) on the notebook. If I open up "Printing", I have 3 printers listed... one of them is for when the printer is attached directly to the notebook, one of them is the working printer description "printer" and the 3d is the bad entry. If I click on the bad entry to try to delete it, I don't have that option, but If I try to look at the "properties" for that entry, system-config-printer stalls (as do other applications when the printing dialog box starts up, and I have to force them to shut down.)
I will attach some screenshots and a copy of my /etc/cups/printers.conf file.How do I get rid of this "bad entry" in the system-config-printers GUI ? It doesn't seem to exist in the printers.conf file.
I want to add my printer to ubuntu 10.04. When I run the system-config-printer (System->Administration->Printing) I can't choose the "Add" in the menu bar (ctrl+n does not work either).
I'm using Gnome and I'd like to still have the ability to reboot/shutdown from one particular account as well as root. How would I modify the chmod command to add this ability?Also, I have a few users who just will hold the power button in to shutdown the machine. How can I keep them from doing this?// Pruned from the vintage 2007 Prevent a non-root user from shutting down, rebooting or suspend the system thread. Please create new threads instead of resurrecting ancient ones.
About a year ago, I decided to remove the battery of my laptop when no mobility were required and the machine could use A/C, in order to --supposedly-- extend the battery's life.The system has suffered a couple of improper shutting downs within this year and, despite no important information was lost and I have not noticed a single problem, I don't know what to do after one. Yesterday, while I was testing some hard disk checking tools, I noticed that there was a damaged sector on the disk. Is it a result of these improper shutting downs? Should I force a file system check after one? Does the system performs a file system check when the error is critical? Should I check the lost+found directory after an improper shutting down --it's empty, by the way?What's the recommended way to proceed after an improper shutting down?
So, I installed debian and everything is nice, only one minor problem I haven't been able to solve is I think when I shutdown the computer running applications are being killled instead of terminated gracefully (if I open iceweasel, open a few tabs, close it and open it again only the homepage is opened, but if I open iceweasel, shutdown the computer, boot it and run iceweasel all the tabs are opened again, the same happens if iceweasel crashes).
I'm using debian version 6.0.2.1, a default install and no major configuration changes was done, I'm shutting down via gnome control-alt-del - shutdown.
I am running fedora 10 on my laptop. I use a usb Western digital "MyBook" 500Gb (ext3). I am using this hard drive since more than 1 year now. Lately I run into a single problem when I read a precise file. The laptop becomes totally unresponsive and I have to manually shutdown the computer. After start-up I can find that the /var/log/message file of my previous session has grown very quickly with "[sdb] Sense Key : No Sense [current]" and "[sdb] Add. Sense: No additional sense information" messages.
I found various similar question on the web, most of the answer were hardware dependent and kernel related. I tried various kernel hoping that my specific problem would be fixed in the next one but with no success (all the kernel since fedora 10 release and two testing one: 2.6.29.5-84.fc10 and 2.6.29.6-93.fc10), I don't have access to a Fedora 11 machine.
I replaced the usb cable and check that the power supply was working correctly.
I am joining part of /var/log/message and the results of lsusb (related to the external hard drive).
After installing and activating "ATI&AMD proprietary FGLRX graphics driver" ;in Ctrl+Alt+F2" mode, do following steps:sudo pidof X (to get pid number)sudo kill xxxx (xxxx is the pid number)Then , system hang up!If the FGLRX driver is not installed , there is no such problem
i am working on a client server real-time gui application written in C++ for Redhat. There is an issue with this application that it makes the system hang. i am not able to sort out the issue as it happens randomly. Sometimes with in half an hour it makes the system hang, sometimes it takes 4 or 5 hours when it receives realtime data. Is there any way to debug this issue. I tried valgrind..but it was not of much use..
i am working on a client server real-time gui application written in C++ for linux os. There is an issue with this application that it makes the system hang. i am not able to sort out the issue as it happens randomly. Sometimes with in half an hour it makes the system hang, sometimes it takes 4 or 5 hours when it receives realtime data. Is there any way to debug this issue. I tried valgrind..but it was not of much use.
I am new to opensuse, coming over from debian based systems. However I am having an issue in which my system will not power off on shutdown. Restarts just fine. i get a missing error during shutdown, but there is nothing to relate the error to on that line. Then the shutdown procedes to The System will be halted immediately then hangs. The keyboard powers off and then thats it. All fans are still running. I have searched extensively on this forum and google.
I am running Ubuntu 10.10 on a Lenovo Thinkpad T61p with 2GB RAM. When I was on Ubuntu 10.04, one day suddenly Azureus hung at the 'loading plugin' screen as it begins. I had to hard reboot my system and it(Azureus) never worked after that so I removed it. Then after a couple of months same thing happened with Adobe Acrobat reader. As soon as I opened any pdf and started to scroll, it hung. System didn't respond and had to hard reboot. I moved to foxit reader Then I upgraded to 10.10 and now mplayer hangs occasionally if I try to switch it to full screen. System stops responding totallyn Where to begin debugging from ? I can't figure out any pattern or any way to reproduce it. I haven't tried Acrobat reader and Azureus on 10.10
I have upgraded to 11.04 all seems well except that now the two machines I have upgraded frequently hang while the screensaver is running. (with unity desktop). Is someone working on this? Gateway t-series notebook and a dell mini 9 netbook that are hanging. The netbook seems to be hanging the most.
fairly new to linux and tried Slack as a way to force myself to learn. I am running current and when i issue the reboot command it will hang on "Restarting system". If i use the shutdown -r now command it will reboot fine. Any ideas?
I'm running V5.3 (newly installed) on an FJ E8020 laptop. The problem I have is when shutting down (*not* rebooting). NetworkManager fails to stop and after (during?) the postfix shutdown, the system seems to hang.I cannot access via another screen or remotely. I can't find any clues in the log files.
Anyone know the reason why a sleep( ) on a Redhat Linux OS would cause the system to indefinitely hang? It's doing this every 10 or so calls in my program and I have to press the reboot button on my computer. My program is reading from a UDP port that has messages sent to it 20 times per second. When I sleep I assume the internal UDP buffer is getting more and more filled.
After a kernel update action, it seems that I'm unable to boot a system anymore. First off, after installing the kernel, and trying to shutdown to boot to the new kernel, the system replied with INIT: no more processes left in this runlevel. Kernel update was performed from to the following versions 2.6.18-128.el5.img -> 2.6.18-164.11.1.el5.img . The system is a VMWare virtual machine. When trying to reboot, the system passes GRUB, starts initializing and after loading the dm it stops for a few seconds at the message Waiting for new devices, show the following message:
Setting up new root fs no fstab.sys, mounting internal defaults. After this and a few other messages, it displays : INIT: version 2.85 booting INIT - No more processes left in this runlevel INIT: Id "x" respawning too fast : disabled for 5 minutes And then it just hangs. This is the output of my inittab:
[code]...
The system boots into failsafe, but still shows the errors mentioned.
