Ubuntu Servers :: Unable To Open Device /dev/megadev0: No Such File Or Directory
Jun 19, 2011
I have an Ubuntu server x64 (10.04) that is running FOG for imaging Its installed on an Intel server board (1 RU rackmount) I configured the RAID in an Intekl based BIOS utility which Looks similar to This Ubuntu installed and runs perfectly. however im unable to monitor the status of the drives from the OS, so Im unaware of any drive failures that may occur I manged to install megacli but it returns blank data (along with exit code: 0x00) Iv also tryed megactl wich says
Code:
unable to open device /dev/megadev0: No such file or directory
one of my colleagues who had used the server previously was certain that the raid was on board the intel site also makes mention of intel using LSI products in their RAID controllers Relevant section of dmidecode:
Code:
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Intel
I install Debian on a Power book g3 and i need the right click function. I try mouseemu but it give me an error: open: No such file or directory No uinput device found! Make sure the uinput module is loaded or CONFIG_INPUT_UINPUT is compiled in kernel. if there are other way for the right click function?
I have two large HDD's in my windows based system. Of course I partitioned them and such (by the way the OS is XP Home) I decided that i would like to try Ubuntu so set up a live CD of version 8.10. now I used the install directions on the disk and installed onto a external 500 gig HDD.Now I can't boot to XP and I get GRUB errors. Some times iit's error 17 sometimes it's 21 . I try using the command terminal ...sudo ms-sys /dev sda1 (my boot-able NTFS disk) but I get "Unable to open -m/dev/sda1, No such file or directory"
I have installed moto4lin, as I want to be able to get pictures off my razr v3mM, which I could easily do in Windows. I found a guide for connecting a v3m, but for some reason moto4lin is screwing around with me. Here is my log:
[info] Phone is unplugged. Please connect it [info] Phone plugged as AT [info] Switching device /dev/ttyACM0 to P2K mode... [error] Unable to open device [error] Please check preferences [info] Switching device /dev/ttyACM0 to P2K mode .....
when I click on any folder under places. for example if I click on my home folder or video folder. Or any folder under places. I get a document viewer message in Red. Saying "Unable to open document" "cant open directory" how I can fix this?? im on 11.04
When booting up my IBM Thinkpad Ubuntu stalls giving the following messages:
Cannot open root device "uuid=58a5831c-5757-49f8.....
Kernal Panic - not syncing: Unable to mount root fs on unknown-block
Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
I am or was using Hardy.
It seems to me that the program is telling me it can't find the hard drive or the partition where the OS resides. I have my drive partitioned with into sections for booting, the OS and my Home directory.
there are number of threads floating on installation of ns2..however i am unable to get it on my 64 bit system ns: error while loading shared libraries: libotcl.so: cannot open shared object file: No such file or directory
When running the beta of blender 2.5, I get the following error. blender: error while loading shared libraries: libpython2.5.so.1.0: cannot open shared object file: No such file or directory In previous versions of ubuntu you could 'apt-get install python2.5' to resolve the issue, but it doesn't appear in any/all of the repositories. where I can get python2.5 for lucid-lynx?
I was looking to download "America's Army" and was doing alright until I hit a slight snag, It had an error while loading libgtk1.2, so I scoured the Internet for a way to fix this and the find command I found just told me it couldn't find the package, this is the first error I got when I tried to uncompress the "America's Army" version I downloaded:
/home/zac/.setup3597: error while loading shared libraries: libgtk-1.2.so.0: can not open shared object file: No such file or directory.
I followed [URL] that thread for installing BitPim on 10.04, but am getting this error:
Quote:
Traceback (most recent call last): File "/opt/cx_Freeze-3.0.3/initscripts/ConsoleSetLibPath.py", line 35, in <module> File "src/bp.py", line 20, in <module> File "src/bp_cli.py", line 21, in <module>
Whenever I try to install a game thats in a .run file format, I get the following error. libgtk-1.2.so.0: cannot open shared object file: No such file or directory
After upgrading from 10.4 to 10.10, the Ubuntu Software Center refused to start, and I got an icon in the notification area saying that "a problem occurred when checking for the updates." When I run software-center in the terminal, I get this error message:
Code:
Traceback (most recent call last): File "/usr/bin/software-center", line 88, in <module> from softwarecenter.app import SoftwareCenterApp File "/usr/share/software-center/softwarecenter/app.py", line 32, in <module>
[code]...
I've tried re-installing apt and all related packages, even dpkg, and even downloaded the apt package directly from the ubuntu web site, but no matter what I do, I can't run these things. Aptitude and apt-get seem to work fine.
Salutations,I've been struggling with getting audacious working for the past hour. I'm using synaptic to install it. When trying to run it from the bash, I'm getting the following error:
Code: audacious: error while loading shared libraries: libmowgli.so.1: cannot open shared object file: No such file or directory.I tried to make /usr/lib/libmowgli.so->libmowgli.so.1 link, but it didn't help. Tried reinstalling audacious/libmowgli and a few others packages, but in vain, too.
i should install a old version of Java EE, so i can write code for a old kind of webservice. Here's what happens:
Code: michael@michi:~/Downloads$ ./j2eesdk-1_4_03-linux.bin./j2eesdk-1_4_03-linux.bin: error while loading shared libraries: libstdc++-libc6.2-2.so.3: cannot open shared object file: No such file or directory I looked for the library in Synaptic, but there are only newer versions of libstdc++. I couldn't find a solution to this problem i was able to follow.
I'm currently stuck at 6.13 GMP-5.0.0 of the LFS installation. After running make, I receive the following:
error while loading shared libraries: libbfd-2.20.so: cannot open shared object file: No such file or directory make[2]: *** [libmpn.la] Error 127 make[2]: Leaving directory `/sources/gmp-5.0.0/mpn'
I get an error when running slapt-get. The error is: "slapt-get: error while loading shared libraries: libsas.so.2: cannot open shared object file: No such file or directory".
I've booted the Slackware disk # 1 and unchecked everything except the libraries category and installed them. I rebooted and it still says this. I get this same error before I put the disk in and rebooted to install ALL libraries. I really need help. BTW, I can't load KDE.I found a pkg manager already installed called "slackpkg". But I really need help on this library issue!! I uninstalled it (slapt-get) anyway, so forget that!
I have installed it (11.3) with KDE desktop.I have a problem with openening a device (harddisc) directly from sysinfo:/It is a ext4 partition, but also with my others (ntfs), this error occurs...
after updating my system I can't start VirtualBox-OSE anymore. I get the error:
VirtualBox: supR3HardenedMainGetTrustedMain: dlopen("/usr/lib/virtualbox/VirtualBox.so",) failed: VBoxVMM.so: cannot open shared object file: No such file or directory
I try to remove and to re-install VirtualBox-OSE again, still the same error. VirtualBox works as root but not from a user account. The installed version is VirtualBox-OSE.i686 3.2.6-2.fc13 @rpmfusion-free-updates
I am trying to run Ansys on Fedora (64bit), but every time I do it gives me this error. "error while loading shared libraries: libXm.so.3: cannot open shared object file: No such file or directory"Please help as I am stuck with this issue for long.
I'm trying to use a software on OpenSuSE 11.3 (64) and am getting an error message similar to the one in the title. I did a bit of background reading on libjpeg.so.62 that the program was asking for. I noticed that I had a file called libjpeg.so.8 in my /usr/lib/ folder. I found a libjpeg.so.62 file online, downloaded it and copied to to my /usr/lib folder, but its not making any difference.
i have a problem with realplayer 11 i can't open it due to that error message
Code: /opt/real/RealPlayer/realplay.bin: error while loading shared libraries: libgdk-x11-2.0.so.0: cannot open shared object file: No such file or directory so how can reveal this problem
I'm trying to install PCSX2 (PS2 emulator) and I get the following error: ./pcsx2: error while loading shared libraries: libgtk-x11-2.0.so.0: cannot open shared object file: No such file or directory
I've followed the instructions here http://pcsx2.net/downloads.php and believe I have all the dependencies installed. My system has the following file:
I have installed and built gazebo and it passed without any errors.I'm running on ubunto 10.10, and I installed gazebo version 0.10 (straight from their website)while trying to run it ( with a given world or without as shown below) I get the following error:
root:~# gazebo gazebo: error while loading shared libraries: libassimp.so: cannot open shared object file: No such file or directory
I tried installing libassimp again, I have installed the 2.0 version from this link
[URL]
when searching for libassimp I get the following results:
I am running after compiling a program and I find that I get the following. How best can I avoid this as i cannot run the program. I have tried removing the offending package, although I cannot find it. I have also tried re-installing. I have also tried changing FC and F90 flags to avoid the MPI version.
error while loading shared libraries: libmpi_f90.so.0: cannot open shared object file: No such file or directory
I tried to upgrade my slackware xfce 13.0 >> 13.1. I read "man slackpkg" first, and then I did exactly what I read at the man pages, my system was in init 1 mode.
The mirror I used it was the Greek mirror for 13.1. The command slackpkg upgrade-all was running ok until the "r" letter after that all packages did not upgraded because it was ERROR CHECKSUMS.md5 to all of them. Slackpkg did not upgrade all this packages but just check them and them skip them.
When everything stopped I reboot but at loading time it stops and I have this message: "libuuid.so.1:cannot open shared object file: No such file or directory."
After that I have 2 options to press control-d to reboot or to give root pass and login as root@(none):
After I login I cant connect to internet, I cant shutdown the system only reboot it from cl, I even cant go to init 1 or anything else. I dont know if I can fix the problem but I have to try...
